qmk_firmware/drivers/led/issi/is31fl3218.c

95 lines
3.0 KiB
C
Raw Normal View History

/* Copyright 2018 Jason Williams (Wilba)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "is31fl3218.h"
#include "i2c_master.h"
// This is the full 8-bit address
#define ISSI_ADDRESS 0b10101000
// These are the register addresses
#define ISSI_REG_SHUTDOWN 0x00
#define ISSI_REG_PWM 0x01
#define ISSI_REG_CONTROL 0x13
#define ISSI_REG_UPDATE 0x16
#define ISSI_REG_RESET 0x17
// Default timeout if no I2C response
#define ISSI_TIMEOUT 100
// Reusable buffer for transfers
uint8_t g_twi_transfer_buffer[20];
// IS31FL3218 has 18 PWM outputs and a fixed I2C address, so no chaining.
// If used as RGB LED driver, LEDs are assigned RGB,RGB,RGB,RGB,RGB,RGB
uint8_t g_pwm_buffer[18];
2019-08-30 20:19:03 +02:00
bool g_pwm_buffer_update_required = false;
2019-08-30 20:19:03 +02:00
void IS31FL3218_write_register(uint8_t reg, uint8_t data) {
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
i2c_transmit(ISSI_ADDRESS, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
}
2019-08-30 20:19:03 +02:00
void IS31FL3218_write_pwm_buffer(uint8_t *pwm_buffer) {
g_twi_transfer_buffer[0] = ISSI_REG_PWM;
memcpy(g_twi_transfer_buffer + 1, pwm_buffer, 18);
2019-08-30 20:19:03 +02:00
i2c_transmit(ISSI_ADDRESS, g_twi_transfer_buffer, 19, ISSI_TIMEOUT);
}
2019-08-30 20:19:03 +02:00
void IS31FL3218_init(void) {
// In case we ever want to reinitialize (?)
IS31FL3218_write_register(ISSI_REG_RESET, 0x00);
// Turn off software shutdown
IS31FL3218_write_register(ISSI_REG_SHUTDOWN, 0x01);
// Set all PWM values to zero
for (uint8_t i = 0; i < 18; i++) {
IS31FL3218_write_register(ISSI_REG_PWM + i, 0x00);
}
// Enable all channels
for (uint8_t i = 0; i < 3; i++) {
IS31FL3218_write_register(ISSI_REG_CONTROL + i, 0b00111111);
}
// Load PWM registers and LED Control register data
IS31FL3218_write_register(ISSI_REG_UPDATE, 0x01);
}
2019-08-30 20:19:03 +02:00
void IS31FL3218_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
g_pwm_buffer[index * 3 + 0] = red;
g_pwm_buffer[index * 3 + 1] = green;
g_pwm_buffer[index * 3 + 2] = blue;
g_pwm_buffer_update_required = true;
}
2019-08-30 20:19:03 +02:00
void IS31FL3218_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
for (int i = 0; i < 6; i++) {
IS31FL3218_set_color(i, red, green, blue);
}
}
2019-08-30 20:19:03 +02:00
void IS31FL3218_update_pwm_buffers(void) {
if (g_pwm_buffer_update_required) {
IS31FL3218_write_pwm_buffer(g_pwm_buffer);
// Load PWM registers and LED Control register data
IS31FL3218_write_register(ISSI_REG_UPDATE, 0x01);
}
g_pwm_buffer_update_required = false;
}