qmk_firmware/hhkb/config_vusb.h

121 lines
3.0 KiB
C
Raw Normal View History

2011-05-15 17:08:06 +02:00
#ifndef CONFIG_H
#define CONFIG_H
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xC0FE
// TODO: share these strings with usbconfig.h
// Edit usbconfig.h to change these.
#define MANUFACTURER t.m.k.
#define PRODUCT HHKB mod
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
/* matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) || \
keyboard_report->mods == (BIT_LCTRL | BIT_RSHIFT) \
)
/* mouse keys */
#ifdef MOUSEKEY_ENABLE
# define MOUSEKEY_DELAY_TIME 255
#endif
/* PS/2 lines */
#ifdef PS2_MOUSE_ENABLE
#define PS2_CLOCK_PORT PORTD
#define PS2_CLOCK_PIN PIND
#define PS2_CLOCK_DDR DDRD
#define PS2_CLOCK_BIT 4
#define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 0
// Synchronous USART is used to receive data from keyboard.
// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK.
// NOTE: This is recomended strongly if you use V-USB library.
#define PS2_USE_USART
// External or Pin Change Interrupt is used to receive data from keyboard.
// Use INT1 or PCINTxx for PS/2 CLOCK line. see below.
//#define PS2_USE_INT
#ifdef PS2_USE_USART
// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
// set DDR of CLOCK as input to be slave
#define PS2_USART_INIT() do { \
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
UCSR0C = ((1 << UMSEL00) | \
(3 << UPM00) | \
(0 << USBS0) | \
(3 << UCSZ00) | \
(0 << UCPOL0)); \
UCSR0A = 0; \
UBRR0H = 0; \
UBRR0L = 0; \
} while (0)
#define PS2_USART_RX_INT_ON() do { \
UCSR0B = ((1 << RXCIE0) | \
(1 << RXEN0)); \
} while (0)
#define PS2_USART_RX_POLL_ON() do { \
UCSR0B = (1 << RXEN0); \
} while (0)
#define PS2_USART_OFF() do { \
UCSR0C = 0; \
UCSR0B &= ~((1 << RXEN0) | \
(1 << TXEN0)); \
} while (0)
#define PS2_USART_RX_READY (UCSR0A & (1<<RXC0))
#define PS2_USART_RX_DATA UDR0
#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
#define PS2_USART_RX_VECT USART_RX_vect
#endif
#ifdef PS2_USE_INT
/* INT1
#define PS2_INT_INIT() do { \
EICRA |= ((1<<ISC11) | \
(0<<ISC10)); \
} while (0)
#define PS2_INT_ON() do { \
EIMSK |= (1<<INT1); \
} while (0)
#define PS2_INT_OFF() do { \
EIMSK &= ~(1<<INT1); \
} while (0)
#define PS2_INT_VECT INT1_vect
*/
/* PCINT20 */
#define PS2_INT_INIT() do { \
PCICR |= (1<<PCIE2); \
} while (0)
#define PS2_INT_ON() do { \
PCMSK2 |= (1<<PCINT20); \
} while (0)
#define PS2_INT_OFF() do { \
PCMSK2 &= ~(1<<PCINT20); \
PCICR &= ~(1<<PCIE2); \
} while (0)
#define PS2_INT_VECT PCINT2_vect
#endif
#endif
#endif