qmk_firmware/FAQ.md

43 lines
1.4 KiB
Markdown
Raw Normal View History

2014-03-01 21:12:59 +01:00
# Build
## 'make clean' needs after changing config.h
2014-03-01 21:13:29 +01:00
To build with new **config.h** you need
2014-03-01 21:12:59 +01:00
$ make clean
2014-03-03 07:16:28 +01:00
## WINAVR is obsolete
It is no longer recommended and may cause some problem.
See [Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
2014-03-01 21:12:59 +01:00
2014-03-01 02:42:00 +01:00
# Degug Console
2014-03-01 03:07:46 +01:00
## hid_listen can't find device
2014-03-01 02:42:00 +01:00
When debug console of your device is not ready you will see like this:
Waiting for device:.........
2014-03-01 03:07:46 +01:00
once the device is pluged in then *hid_listen* finds it you will get this message:
2014-03-01 02:42:00 +01:00
Waiting for new device:.........................
Listening:
2014-03-01 03:07:46 +01:00
Check if you can't get this 'Listening:' message:
- build with `CONSOLE_ENABLE=yes` in **Makefile**.
2014-03-01 02:42:00 +01:00
2014-03-01 03:07:46 +01:00
## Can't get message from console
Check:
2014-03-01 03:09:22 +01:00
- connect the device to *hid_listen*. See above.
2014-03-01 03:07:46 +01:00
- push **LShift+RShift+d** to enable debug. See [Magic Commands](https://github.com/tmk/tmk_keyboard#magic-commands).
2014-03-01 03:09:22 +01:00
- set `debug_enable=yes` usually in `matrix_init()` in **matrix.c**.
2014-03-01 03:07:46 +01:00
- try using 'print' function instead of debug print. See **common/print.h**.
2014-03-01 03:09:22 +01:00
- disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
2014-03-01 03:07:46 +01:00
***
2014-03-01 02:42:00 +01:00
# NKRO
2014-03-01 21:34:51 +01:00
# PS/2 mouse support
## TrackPoint needs reset circuit
2014-03-01 21:53:20 +01:00
Without reset circuit you will have inconsistent reuslt due to improper initialize of the hardware. See circuit schematic of TPM754.
2014-03-01 21:34:51 +01:00
http://geekhack.org/index.php?topic=50176.msg1127447#msg1127447
2014-03-01 21:53:20 +01:00
http://www.mikrocontroller.net/attachment/52583/tpm754.pdf