[Keyboard] Updates for Tractyl Manuform config (#14641)

keyboards/handwired/tractyl_manuform/5x6_right/5x6_right.h

@@ -19,6 +19,8 @@
 #include "tractyl_manuform.h"
 #if defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_f411)
 #    include "f411.h"
+#elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_f303)
+#    include "f303.h"
 #elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_teensy2pp)
 #    include "teensy2pp.h"
 #endif

keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h

@@ -0,0 +1,104 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define PRODUCT Tractyl Manuform(5x6) Proton C
+
+// wiring of each half
+#define MATRIX_COL_PINS \
+    { B0, B1, B2, B3, B4, B5 }
+#define MATRIX_ROW_PINS \
+    { B10, B11, B12, A14, A13, A15 }
+
+#define UNUSED_PINS \
+    { A0, A2, A7, A8 }
+// B2 used for BOOT1, has internal pull down?
+// A9 has internal pull-down
+// A11 and A12 are used for USB sense.  DO NOT USE.
+
+#define DIODE_DIRECTION     COL2ROW
+
+// #define USB_VBUS_PIN        B10
+#define SPLIT_HAND_PIN      C14  // high = left, low = right
+
+// WS2812 RGB LED strip input and number of LEDs
+#define RGB_DI_PIN          A6
+#define WS2812_PWM_DRIVER   PWMD3  // default: PWMD2
+#define WS2812_PWM_CHANNEL  1      // default: 2
+#define WS2812_PWM_PAL_MODE 2      // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
+//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
+// #define WS2812_DMA_STREAM   STM32_DMA1_STREAM3  // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+#define WS2812_DMA_CHANNEL  3  // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
+
+#define RGBLED_NUM          20
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT \
+    { 10, 10 }
+
+#define DEBUG_LED_PIN C13
+
+/* Audio config */
+#define AUDIO_PIN     A5
+#define AUDIO_PIN_ALT A4
+#define AUDIO_PIN_ALT_AS_NEGATIVE
+
+/* serial.c configuration for split keyboard */
+#define SERIAL_USART_FULL_DUPLEX  // Enable full duplex operation mode.
+#define SERIAL_USART_TX_PIN      A9
+#define SERIAL_USART_RX_PIN      A10
+#define SERIAL_USART_DRIVER      SD1
+#define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+#define SERIAL_USART_RX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+#define SERIAL_USART_TIMEOUT     100  // USART driver timeout. default 100
+
+/* i2c config for oleds */
+#define I2C_DRIVER               I2CD1
+#define I2C1_SCL_PIN             B6
+#define I2C1_SDA_PIN             B7
+#define I2C1_SCL_PAL_MODE        4
+#define I2C1_SDA_PAL_MODE        4
+#define I2C1_CLOCK_SPEED         400000
+
+/* encoder config */
+#define ENCODERS_PAD_A \
+    { A7 }
+#define ENCODERS_PAD_B \
+    { A8 }
+
+/* spi config for eeprom and pmw3360 sensor */
+#define SPI_DRIVER                           SPID2
+#define SPI_SCK_PIN                          B13
+#define SPI_SCK_PAL_MODE                     5
+#define SPI_MOSI_PIN                         B15
+#define SPI_MOSI_PAL_MODE                    5
+#define SPI_MISO_PIN                         B14
+#define SPI_MISO_PAL_MODE                    5
+
+/* eeprom config */
+#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B8
+#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR    8
+// #define EXTERNAL_EEPROM_BYTE_COUNT           8196
+// #define EXTERNAL_EEPROM_PAGE_SIZE            32
+// #define EXTERNAL_EEPROM_ADDRESS_SIZE         2
+// #define DEBUG_EEPROM_OUTPUT
+
+/* pmw3360 config  */
+#define PMW3360_CS_PIN                       B9
+#define PMW3360_SPI_MODE                     3
+#define PMW3360_SPI_DIVISOR                  8

keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "f303.h"

keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "5x6_right.h"

keyboards/handwired/tractyl_manuform/5x6_right/f303/halconf.h

@@ -0,0 +1,27 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define HAL_USE_PWM     TRUE
+#define HAL_USE_SERIAL  TRUE
+#define HAL_USE_I2C     TRUE
+#define HAL_USE_SPI     TRUE
+#define HAL_USE_GPT     TRUE
+#define HAL_USE_DAC     TRUE
+#define SPI_USE_WAIT    TRUE
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+
+#include_next <halconf.h>

keyboards/handwired/tractyl_manuform/5x6_right/f303/mcuconf.h

@@ -0,0 +1,40 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next "mcuconf.h"
+
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE
+
+#undef STM32_SPI_USE_SPI2
+#define STM32_SPI_USE_SPI2 TRUE
+
+#undef STM32_SERIAL_USE_USART1
+#define STM32_SERIAL_USE_USART1 TRUE
+
+#undef STM32_DAC_USE_DAC1_CH1
+#define STM32_DAC_USE_DAC1_CH1 TRUE
+
+#undef STM32_DAC_USE_DAC1_CH2
+#define STM32_DAC_USE_DAC1_CH2 TRUE
+
+#undef STM32_GPT_USE_TIM6
+#define STM32_GPT_USE_TIM6 TRUE
+
+#undef STM32_PWM_USE_TIM3
+#define STM32_PWM_USE_TIM3 TRUE

keyboards/handwired/tractyl_manuform/5x6_right/f303/readme.md

@@ -0,0 +1,24 @@
+# Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball
+
+
+* Split Hand Pin, using PC14
+* Full Duplex Serial/USART using PA9 and PA10 on USART1
+* DAC Audio using PA4 and PA5
+* PWM RGB using PA6 TIM3
+* pmw3360 sensor using PA5-PA7 on SPI2, with B as CS pin
+* 8KB SPI EEPROM chip sharing PB13-PB15 on SPI1 with PB9 as CS pin
+* Encoder using PA7 and PA8
+* SSD1306 OLED display (128x64) using PB6 and PB7 on I2C1
+
+* Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna)
+* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/tractyl_manuform/5x6_right/f411:default
+
+Flashing example for this keyboard:
+
+    make handwired/tractyl_manuform/5x6_right/f411:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk

@@ -0,0 +1,13 @@
+# MCU name
+MCU = STM32F303
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# KEYBOARD_SHARED_EP = yes
+CONSOLE_ENABLE     = yes
+
+EEPROM_DRIVER = spi
+WS2812_DRIVER = pwm
+SERIAL_DRIVER = usart
+AUDIO_DRIVER  = dac_additive

keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h

@@ -28,9 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define UNUSED_PINS \
     { C15 }
-// B2 used for BOOT1, has internal pull down?
-// A9 has internal pull-down
-// A11 and A12 are used for USB sense.  DO NOT USE.
 
 #define DIODE_DIRECTION     COL2ROW
 

keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c

@@ -23,3 +23,9 @@ void matrix_scan_sub_kb(void) {
         reset_keyboard();
     }
 }
+
+bool usb_vbus_state(void) {
+    setPinInputLow(USB_VBUS_PIN);
+    wait_us(5);
+    return readPin(USB_VBUS_PIN);
+}

keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h

@@ -15,10 +15,12 @@
  */
 #pragma once
 
-#define HAL_USE_PWM    TRUE
+#define HAL_USE_PWM     TRUE
-#define HAL_USE_SERIAL TRUE
+#define HAL_USE_SERIAL  TRUE
-#define HAL_USE_I2C    TRUE
+#define HAL_USE_I2C     TRUE
-#define HAL_USE_SPI    TRUE
+#define HAL_USE_SPI     TRUE
-#define HAL_USE_GPT    TRUE
+#define SPI_USE_WAIT    TRUE
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#define HAL_USE_GPT     TRUE
 
 #include_next <halconf.h>

keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c

@@ -29,13 +29,13 @@ bool enable_acceleration = false;
     K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
   ) \
   LAYOUT_5x6_right_wrapper( \
-     KC_ESC,  ________________NUMBER_LEFT________________,            ________________NUMBER_RIGHT_______________, UC_IRNY, \
+     KC_ESC,  ________________NUMBER_LEFT________________,            ________________NUMBER_RIGHT_______________, UC_CLUE, \
      SH_TT,   K01,    K02,      K03,     K04,     K05,                K06,     K07,     K08,     K09,     K0A,     SH_TT, \
      LALT_T(KC_TAB), K11, K12,  K13,     K14,     K15,                K16,     K17,     K18,     K19,     K1A,     RALT_T(K1B), \
      OS_LSFT, CTL_T(K21), K22,  K23,     K24,     K25,                K26,     K27,     K28,     K29, RCTL_T(K2A), OS_RSFT, \
                        OS_LALT, OS_LGUI,                                                OS_RGUI, OS_RALT, \
                                 KC_MUTE, KC_GRV,                                        KC_BTN3,  \
-                                         KC_SPC,  OS_LGUI,                     KC_ENT,  \
+                                         KC_SPC,  UC_IRNY,                     KC_ENT,  \
                                          BK_LWER, TT(_MOUSE),      TT(_MOUSE), DL_RAIS  \
   )
 #define LAYOUT_base_wrapper(...)       LAYOUT_5x6_right_base(__VA_ARGS__)