Eager Per Row Debouncing added (added to Ergodox) (#5498)
* Implemented Eager Per Row debouncing algorithm. Good for when fingers can only press one row at a time (e.g. when keyboard is wired so that "rows" are vertical) * Added documentation for eager_pr * Ported ergodox_ez to eager_pr debouncing. * Removed check for changes in matrix_scan. * Added further clarification in docs. * Accidental merge with ergodox_ez * Small cleanup in eager_pr * Forgot to debounce_init - this would probably cause seg-faults.
This commit is contained in:
Alex Ong
Drashna Jaelre
parent
e1e08a494b
commit
17e7762de7
|
|
@ -33,7 +33,10 @@ The debounce code is compatible with split keyboards.
|
|||
# Changing between included debouncing methods
|
||||
You can either use your own code, by including your own debounce.c, or switch to another included one.
|
||||
Included debounce methods are:
|
||||
* eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` millseconds of no further input for that key
|
||||
* eager_pr - debouncing per row. On any state change, response is immediate, followed by locking the row ```DEBOUNCE_DELAY``` milliseconds of no further input for that row.
|
||||
For use in keyboards where refreshing ```NUM_KEYS``` 8-bit counters is computationally expensive / low scan rate, and fingers usually only hit one row at a time. This could be
|
||||
appropriate for the ErgoDox models; the matrix is rotated 90°, and hence its "rows" are really columns, and each finger only hits a single "row" at a time in normal use.
|
||||
* eager_pk - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE_DELAY``` milliseconds of no further input for that key
|
||||
* sym_g - debouncing per keyboard. On any state change, a global timer is set. When ```DEBOUNCE_DELAY``` milliseconds of no changes has occured, all input changes are pushed.
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -33,14 +33,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "debounce.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
#ifdef DEBUG_MATRIX_SCAN_RATE
|
||||
#include "timer.h"
|
||||
# include "timer.h"
|
||||
#endif
|
||||
|
||||
/*
|
||||
* This constant define not debouncing time in msecs, but amount of matrix
|
||||
* scan loops which should be made to get stable debounced results.
|
||||
* This constant define not debouncing time in msecs, assuming eager_pr.
|
||||
*
|
||||
* On Ergodox matrix scan rate is relatively low, because of slow I2C.
|
||||
* Now it's only 317 scans/second, or about 3.15 msec/scan.
|
||||
|
|
@ -52,26 +52,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
*/
|
||||
|
||||
#ifndef DEBOUNCE
|
||||
# define DEBOUNCE 5
|
||||
# define DEBOUNCE 5
|
||||
#endif
|
||||
|
||||
/* matrix state(1:on, 0:off) */
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
/*
|
||||
* matrix state(1:on, 0:off)
|
||||
* contains the raw values without debounce filtering of the last read cycle.
|
||||
*/
|
||||
static matrix_row_t raw_matrix[MATRIX_ROWS];
|
||||
|
||||
// Debouncing: store for each key the number of scans until it's eligible to
|
||||
// change. When scanning the matrix, ignore any changes in keys that have
|
||||
// already changed in the last DEBOUNCE scans.
|
||||
static uint8_t debounce_matrix[MATRIX_ROWS * MATRIX_COLS];
|
||||
static matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values
|
||||
static matrix_row_t matrix[MATRIX_ROWS]; // debounced values
|
||||
|
||||
static matrix_row_t read_cols(uint8_t row);
|
||||
static void init_cols(void);
|
||||
static void unselect_rows(void);
|
||||
static void select_row(uint8_t row);
|
||||
static void init_cols(void);
|
||||
static void unselect_rows(void);
|
||||
static void select_row(uint8_t row);
|
||||
|
||||
static uint8_t mcp23018_reset_loop;
|
||||
// static uint16_t mcp23018_reset_loop;
|
||||
|
|
@ -81,197 +72,137 @@ uint32_t matrix_timer;
|
|||
uint32_t matrix_scan_count;
|
||||
#endif
|
||||
|
||||
__attribute__((weak)) void matrix_init_user(void) {}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {}
|
||||
__attribute__((weak)) void matrix_scan_user(void) {}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {}
|
||||
__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
}
|
||||
__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_kb(void) {
|
||||
matrix_scan_user();
|
||||
}
|
||||
inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void)
|
||||
{
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void)
|
||||
{
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
void matrix_init(void) {
|
||||
// initialize row and col
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
// initialize row and col
|
||||
mcp23018_status = init_mcp23018();
|
||||
|
||||
mcp23018_status = init_mcp23018();
|
||||
unselect_rows();
|
||||
init_cols();
|
||||
|
||||
|
||||
unselect_rows();
|
||||
init_cols();
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = 0;
|
||||
raw_matrix[i] = 0;
|
||||
for (uint8_t j=0; j < MATRIX_COLS; ++j) {
|
||||
debounce_matrix[i * MATRIX_COLS + j] = 0;
|
||||
}
|
||||
}
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = 0;
|
||||
raw_matrix[i] = 0;
|
||||
}
|
||||
|
||||
#ifdef DEBUG_MATRIX_SCAN_RATE
|
||||
matrix_timer = timer_read32();
|
||||
matrix_scan_count = 0;
|
||||
matrix_timer = timer_read32();
|
||||
matrix_scan_count = 0;
|
||||
#endif
|
||||
|
||||
matrix_init_quantum();
|
||||
|
||||
debounce_init(MATRIX_ROWS);
|
||||
matrix_init_quantum();
|
||||
}
|
||||
|
||||
void matrix_power_up(void) {
|
||||
mcp23018_status = init_mcp23018();
|
||||
mcp23018_status = init_mcp23018();
|
||||
|
||||
unselect_rows();
|
||||
init_cols();
|
||||
unselect_rows();
|
||||
init_cols();
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = 0;
|
||||
}
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = 0;
|
||||
}
|
||||
|
||||
#ifdef DEBUG_MATRIX_SCAN_RATE
|
||||
matrix_timer = timer_read32();
|
||||
matrix_scan_count = 0;
|
||||
matrix_timer = timer_read32();
|
||||
matrix_scan_count = 0;
|
||||
#endif
|
||||
}
|
||||
|
||||
// Returns a matrix_row_t whose bits are set if the corresponding key should be
|
||||
// eligible to change in this scan.
|
||||
matrix_row_t debounce_mask(matrix_row_t rawcols, uint8_t row) {
|
||||
matrix_row_t result = 0;
|
||||
matrix_row_t change = rawcols ^ raw_matrix[row];
|
||||
raw_matrix[row] = rawcols;
|
||||
for (uint8_t i = 0; i < MATRIX_COLS; ++i) {
|
||||
if (debounce_matrix[row * MATRIX_COLS + i]) {
|
||||
--debounce_matrix[row * MATRIX_COLS + i];
|
||||
} else {
|
||||
result |= (1 << i);
|
||||
}
|
||||
if (change & (1 << i)) {
|
||||
debounce_matrix[row * MATRIX_COLS + i] = DEBOUNCE;
|
||||
uint8_t matrix_scan(void) {
|
||||
if (mcp23018_status) { // if there was an error
|
||||
if (++mcp23018_reset_loop == 0) {
|
||||
// if (++mcp23018_reset_loop >= 1300) {
|
||||
// since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
|
||||
// this will be approx bit more frequent than once per second
|
||||
print("trying to reset mcp23018\n");
|
||||
mcp23018_status = init_mcp23018();
|
||||
if (mcp23018_status) {
|
||||
print("left side not responding\n");
|
||||
} else {
|
||||
print("left side attached\n");
|
||||
ergodox_blink_all_leds();
|
||||
}
|
||||
}
|
||||
}
|
||||
return result;
|
||||
}
|
||||
|
||||
matrix_row_t debounce_read_cols(uint8_t row) {
|
||||
// Read the row without debouncing filtering and store it for later usage.
|
||||
matrix_row_t cols = read_cols(row);
|
||||
// Get the Debounce mask.
|
||||
matrix_row_t mask = debounce_mask(cols, row);
|
||||
// debounce the row and return the result.
|
||||
return (cols & mask) | (matrix[row] & ~mask);;
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
if (mcp23018_status) { // if there was an error
|
||||
if (++mcp23018_reset_loop == 0) {
|
||||
// if (++mcp23018_reset_loop >= 1300) {
|
||||
// since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
|
||||
// this will be approx bit more frequent than once per second
|
||||
print("trying to reset mcp23018\n");
|
||||
mcp23018_status = init_mcp23018();
|
||||
if (mcp23018_status) {
|
||||
print("left side not responding\n");
|
||||
} else {
|
||||
print("left side attached\n");
|
||||
ergodox_blink_all_leds();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef DEBUG_MATRIX_SCAN_RATE
|
||||
matrix_scan_count++;
|
||||
matrix_scan_count++;
|
||||
|
||||
uint32_t timer_now = timer_read32();
|
||||
if (TIMER_DIFF_32(timer_now, matrix_timer)>1000) {
|
||||
print("matrix scan frequency: ");
|
||||
pdec(matrix_scan_count);
|
||||
print("\n");
|
||||
uint32_t timer_now = timer_read32();
|
||||
if (TIMER_DIFF_32(timer_now, matrix_timer) > 1000) {
|
||||
print("matrix scan frequency: ");
|
||||
pdec(matrix_scan_count);
|
||||
print("\n");
|
||||
|
||||
matrix_timer = timer_now;
|
||||
matrix_scan_count = 0;
|
||||
}
|
||||
matrix_timer = timer_now;
|
||||
matrix_scan_count = 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef LEFT_LEDS
|
||||
mcp23018_status = ergodox_left_leds_update();
|
||||
#endif // LEFT_LEDS
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
|
||||
select_row(i);
|
||||
// and select on left hand
|
||||
select_row(i + MATRIX_ROWS_PER_SIDE);
|
||||
// we don't need a 30us delay anymore, because selecting a
|
||||
// left-hand row requires more than 30us for i2c.
|
||||
mcp23018_status = ergodox_left_leds_update();
|
||||
#endif // LEFT_LEDS
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
|
||||
// select rows from left and right hands
|
||||
select_row(i);
|
||||
select_row(i + MATRIX_ROWS_PER_SIDE);
|
||||
|
||||
// grab cols from left hand
|
||||
matrix[i] = debounce_read_cols(i);
|
||||
// grab cols from right hand
|
||||
matrix[i + MATRIX_ROWS_PER_SIDE] = debounce_read_cols(i + MATRIX_ROWS_PER_SIDE);
|
||||
// we don't need a 30us delay anymore, because selecting a
|
||||
// left-hand row requires more than 30us for i2c.
|
||||
|
||||
unselect_rows();
|
||||
}
|
||||
// grab left + right cols.
|
||||
raw_matrix[i] = read_cols(i);
|
||||
raw_matrix[i+MATRIX_ROWS_PER_SIDE] = read_cols(i+MATRIX_ROWS_PER_SIDE);
|
||||
|
||||
unselect_rows();
|
||||
}
|
||||
|
||||
debounce(raw_matrix, matrix, MATRIX_ROWS, true);
|
||||
matrix_scan_quantum();
|
||||
|
||||
matrix_scan_quantum();
|
||||
|
||||
return 1;
|
||||
return 1;
|
||||
}
|
||||
|
||||
bool matrix_is_modified(void) // deprecated and evidently not called.
|
||||
bool matrix_is_modified(void) // deprecated and evidently not called.
|
||||
{
|
||||
return true;
|
||||
return true;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & ((matrix_row_t)1<<col));
|
||||
inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
|
||||
|
||||
inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
|
||||
|
||||
void matrix_print(void) {
|
||||
print("\nr/c 0123456789ABCDEF\n");
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
phex(row);
|
||||
print(": ");
|
||||
pbin_reverse16(matrix_get_row(row));
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
inline
|
||||
matrix_row_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print("\nr/c 0123456789ABCDEF\n");
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
phex(row); print(": ");
|
||||
pbin_reverse16(matrix_get_row(row));
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += bitpop16(matrix[i]);
|
||||
}
|
||||
return count;
|
||||
uint8_t matrix_key_count(void) {
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += bitpop16(matrix[i]);
|
||||
}
|
||||
return count;
|
||||
}
|
||||
|
||||
/* Column pin configuration
|
||||
|
|
@ -284,43 +215,45 @@ uint8_t matrix_key_count(void)
|
|||
* col: 0 1 2 3 4 5
|
||||
* pin: B5 B4 B3 B2 B1 B0
|
||||
*/
|
||||
static void init_cols(void)
|
||||
{
|
||||
// init on mcp23018
|
||||
// not needed, already done as part of init_mcp23018()
|
||||
static void init_cols(void) {
|
||||
// init on mcp23018
|
||||
// not needed, already done as part of init_mcp23018()
|
||||
|
||||
// init on teensy
|
||||
// Input with pull-up(DDR:0, PORT:1)
|
||||
DDRF &= ~(1<<7 | 1<<6 | 1<<5 | 1<<4 | 1<<1 | 1<<0);
|
||||
PORTF |= (1<<7 | 1<<6 | 1<<5 | 1<<4 | 1<<1 | 1<<0);
|
||||
// init on teensy
|
||||
// Input with pull-up(DDR:0, PORT:1)
|
||||
DDRF &= ~(1 << 7 | 1 << 6 | 1 << 5 | 1 << 4 | 1 << 1 | 1 << 0);
|
||||
PORTF |= (1 << 7 | 1 << 6 | 1 << 5 | 1 << 4 | 1 << 1 | 1 << 0);
|
||||
}
|
||||
|
||||
static matrix_row_t read_cols(uint8_t row)
|
||||
{
|
||||
if (row < 7) {
|
||||
if (mcp23018_status) { // if there was an error
|
||||
return 0;
|
||||
} else {
|
||||
uint8_t data = 0;
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPIOB, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status < 0) goto out;
|
||||
data = ~((uint8_t)mcp23018_status);
|
||||
mcp23018_status = I2C_STATUS_SUCCESS;
|
||||
out:
|
||||
i2c_stop();
|
||||
return data;
|
||||
}
|
||||
static matrix_row_t read_cols(uint8_t row) {
|
||||
if (row < 7) {
|
||||
if (mcp23018_status) { // if there was an error
|
||||
return 0;
|
||||
} else {
|
||||
/* read from teensy
|
||||
* bitmask is 0b11110011, but we want those all
|
||||
* in the lower six bits.
|
||||
* we'll return 1s for the top two, but that's harmless.
|
||||
*/
|
||||
|
||||
return ~((PINF & 0x03) | ((PINF & 0xF0) >> 2));
|
||||
uint8_t data = 0;
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPIOB, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status < 0) goto out;
|
||||
data = ~((uint8_t)mcp23018_status);
|
||||
mcp23018_status = I2C_STATUS_SUCCESS;
|
||||
out:
|
||||
i2c_stop();
|
||||
return data;
|
||||
}
|
||||
} else {
|
||||
/* read from teensy
|
||||
* bitmask is 0b11110011, but we want those all
|
||||
* in the lower six bits.
|
||||
* we'll return 1s for the top two, but that's harmless.
|
||||
*/
|
||||
|
||||
return ~((PINF & 0x03) | ((PINF & 0xF0) >> 2));
|
||||
}
|
||||
}
|
||||
|
||||
/* Row pin configuration
|
||||
|
|
@ -333,69 +266,70 @@ static matrix_row_t read_cols(uint8_t row)
|
|||
* row: 0 1 2 3 4 5 6
|
||||
* pin: A0 A1 A2 A3 A4 A5 A6
|
||||
*/
|
||||
static void unselect_rows(void)
|
||||
{
|
||||
// no need to unselect on mcp23018, because the select step sets all
|
||||
// the other row bits high, and it's not changing to a different
|
||||
// direction
|
||||
static void unselect_rows(void) {
|
||||
// no need to unselect on mcp23018, because the select step sets all
|
||||
// the other row bits high, and it's not changing to a different
|
||||
// direction
|
||||
|
||||
// unselect on teensy
|
||||
// Hi-Z(DDR:0, PORT:0) to unselect
|
||||
DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3);
|
||||
PORTB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3);
|
||||
DDRD &= ~(1<<2 | 1<<3);
|
||||
PORTD &= ~(1<<2 | 1<<3);
|
||||
DDRC &= ~(1<<6);
|
||||
PORTC &= ~(1<<6);
|
||||
// unselect on teensy
|
||||
// Hi-Z(DDR:0, PORT:0) to unselect
|
||||
DDRB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3);
|
||||
PORTB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3);
|
||||
DDRD &= ~(1 << 2 | 1 << 3);
|
||||
PORTD &= ~(1 << 2 | 1 << 3);
|
||||
DDRC &= ~(1 << 6);
|
||||
PORTC &= ~(1 << 6);
|
||||
}
|
||||
|
||||
static void select_row(uint8_t row)
|
||||
{
|
||||
if (row < 7) {
|
||||
// select on mcp23018
|
||||
if (mcp23018_status) { // if there was an error
|
||||
// do nothing
|
||||
} else {
|
||||
// set active row low : 0
|
||||
// set other rows hi-Z : 1
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0xFF & ~(1<<row), ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
||||
out:
|
||||
i2c_stop();
|
||||
}
|
||||
static void select_row(uint8_t row) {
|
||||
if (row < 7) {
|
||||
// select on mcp23018
|
||||
if (mcp23018_status) { // if there was an error
|
||||
// do nothing
|
||||
} else {
|
||||
// select on teensy
|
||||
// Output low(DDR:1, PORT:0) to select
|
||||
switch (row) {
|
||||
case 7:
|
||||
DDRB |= (1<<0);
|
||||
PORTB &= ~(1<<0);
|
||||
break;
|
||||
case 8:
|
||||
DDRB |= (1<<1);
|
||||
PORTB &= ~(1<<1);
|
||||
break;
|
||||
case 9:
|
||||
DDRB |= (1<<2);
|
||||
PORTB &= ~(1<<2);
|
||||
break;
|
||||
case 10:
|
||||
DDRB |= (1<<3);
|
||||
PORTB &= ~(1<<3);
|
||||
break;
|
||||
case 11:
|
||||
DDRD |= (1<<2);
|
||||
PORTD &= ~(1<<2);
|
||||
break;
|
||||
case 12:
|
||||
DDRD |= (1<<3);
|
||||
PORTD &= ~(1<<3);
|
||||
break;
|
||||
case 13:
|
||||
DDRC |= (1<<6);
|
||||
PORTC &= ~(1<<6);
|
||||
break;
|
||||
}
|
||||
// set active row low : 0
|
||||
// set other rows hi-Z : 1
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0xFF & ~(1 << row), ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status) goto out;
|
||||
out:
|
||||
i2c_stop();
|
||||
}
|
||||
} else {
|
||||
// select on teensy
|
||||
// Output low(DDR:1, PORT:0) to select
|
||||
switch (row) {
|
||||
case 7:
|
||||
DDRB |= (1 << 0);
|
||||
PORTB &= ~(1 << 0);
|
||||
break;
|
||||
case 8:
|
||||
DDRB |= (1 << 1);
|
||||
PORTB &= ~(1 << 1);
|
||||
break;
|
||||
case 9:
|
||||
DDRB |= (1 << 2);
|
||||
PORTB &= ~(1 << 2);
|
||||
break;
|
||||
case 10:
|
||||
DDRB |= (1 << 3);
|
||||
PORTB &= ~(1 << 3);
|
||||
break;
|
||||
case 11:
|
||||
DDRD |= (1 << 2);
|
||||
PORTD &= ~(1 << 2);
|
||||
break;
|
||||
case 12:
|
||||
DDRD |= (1 << 3);
|
||||
PORTD &= ~(1 << 3);
|
||||
break;
|
||||
case 13:
|
||||
DDRC |= (1 << 6);
|
||||
PORTC &= ~(1 << 6);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -83,6 +83,7 @@ SLEEP_LED_ENABLE = no
|
|||
API_SYSEX_ENABLE = no
|
||||
RGBLIGHT_ENABLE = yes
|
||||
RGB_MATRIX_ENABLE = no # enable later
|
||||
DEBOUNCE_TYPE = eager_pr
|
||||
|
||||
ifeq ($(strip $(RGB_MATRIX_ENABLE)), no)
|
||||
SRC += i2c_master.c
|
||||
|
|
|
|||
|
|
@ -0,0 +1,100 @@
|
|||
/*
|
||||
Copyright 2019 Alex Ong<the.onga@gmail.com>
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/*
|
||||
Basic per-row algorithm. Uses an 8-bit counter per row.
|
||||
After pressing a key, it immediately changes state, and sets a counter.
|
||||
No further inputs are accepted until DEBOUNCE milliseconds have occurred.
|
||||
*/
|
||||
|
||||
#include "matrix.h"
|
||||
#include "timer.h"
|
||||
#include "quantum.h"
|
||||
#include <stdlib.h>
|
||||
|
||||
#ifndef DEBOUNCE
|
||||
#define DEBOUNCE 5
|
||||
#endif
|
||||
|
||||
|
||||
#define debounce_counter_t uint8_t
|
||||
|
||||
static debounce_counter_t *debounce_counters;
|
||||
|
||||
#define DEBOUNCE_ELAPSED 251
|
||||
#define MAX_DEBOUNCE (DEBOUNCE_ELAPSED - 1)
|
||||
|
||||
void update_debounce_counters(uint8_t num_rows, uint8_t current_time);
|
||||
void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time);
|
||||
|
||||
//we use num_rows rather than MATRIX_ROWS to support split keyboards
|
||||
void debounce_init(uint8_t num_rows)
|
||||
{
|
||||
debounce_counters = (debounce_counter_t*)malloc(num_rows*sizeof(debounce_counter_t));
|
||||
for (uint8_t r = 0; r < num_rows; r++)
|
||||
{
|
||||
debounce_counters[r] = DEBOUNCE_ELAPSED;
|
||||
}
|
||||
}
|
||||
|
||||
void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed)
|
||||
{
|
||||
uint8_t current_time = timer_read() % MAX_DEBOUNCE;
|
||||
update_debounce_counters(num_rows, current_time);
|
||||
transfer_matrix_values(raw, cooked, num_rows, current_time);
|
||||
}
|
||||
|
||||
//If the current time is > debounce counter, set the counter to enable input.
|
||||
void update_debounce_counters(uint8_t num_rows, uint8_t current_time)
|
||||
{
|
||||
debounce_counter_t *debounce_pointer = debounce_counters;
|
||||
for (uint8_t row = 0; row < num_rows; row++)
|
||||
{
|
||||
if (*debounce_pointer != DEBOUNCE_ELAPSED)
|
||||
{
|
||||
if (TIMER_DIFF(current_time, *debounce_pointer, MAX_DEBOUNCE) >= DEBOUNCE) {
|
||||
*debounce_pointer = DEBOUNCE_ELAPSED;
|
||||
}
|
||||
}
|
||||
debounce_pointer++;
|
||||
}
|
||||
}
|
||||
|
||||
// upload from raw_matrix to final matrix;
|
||||
void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time)
|
||||
{
|
||||
debounce_counter_t *debounce_pointer = debounce_counters;
|
||||
for (uint8_t row = 0; row < num_rows; row++)
|
||||
{
|
||||
matrix_row_t existing_row = cooked[row];
|
||||
matrix_row_t raw_row = raw[row];
|
||||
|
||||
//determine new value basd on debounce pointer + raw value
|
||||
if (*debounce_pointer == DEBOUNCE_ELAPSED &&
|
||||
(existing_row != raw_row))
|
||||
{
|
||||
*debounce_pointer = current_time;
|
||||
existing_row = raw_row;
|
||||
}
|
||||
cooked[row] = existing_row;
|
||||
|
||||
debounce_pointer++;
|
||||
}
|
||||
}
|
||||
|
||||
bool debounce_active(void)
|
||||
{
|
||||
return true;
|
||||
}
|
||||
|
||||
|
|
@ -22,7 +22,7 @@ Here are a few that could be implemented:
|
|||
sym_g.c
|
||||
sym_pk.c
|
||||
sym_pr.c
|
||||
sym_pr_cycles.c //currently used in ergo-dox
|
||||
sym_pr_cycles.c
|
||||
eager_g.c
|
||||
eager_pk.c
|
||||
eager_pr.c //could be used in ergo-dox!
|
||||
|
|
|
|||
Loading…
Reference in New Issue