Merge remote-tracking branch 'origin/master' into develop

This commit is contained in:
QMK Bot 2022-11-30 02:46:25 +00:00
commit 20b901366a
1 changed files with 7 additions and 7 deletions

View File

@ -39,7 +39,7 @@ The `info.json` file is a JSON formatted dictionary. The first six keys noted he
?> For all the available keys and their allowed values refer back to the [`data/schemas/keyboard.jsonschema`](https://github.com/qmk/qmk_firmware/blob/master/data/schemas/keyboard.jsonschema) file.
### Layout Format
## Layout Format
Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`.
@ -68,11 +68,11 @@ All key positions and rotations are specified in relation to the top-left corner
* A two item list describing the row and column location for this key.
* Example: `[0, 4]`
### Matrix Pins
## Matrix Pins
Currently QMK supports connecting switches either directly to GPIO pins or via a switch matrix. At this time you can not combine these, they are mutually exclusive.
#### Switch Matrix
### Switch Matrix
Most keyboards use a switch matrix to connect keyswitches to the MCU. You can define your pin columns and rows to configure your switch matrix. When defining switch matrices you should also define your `diode_direction`.
@ -88,7 +88,7 @@ Example:
}
```
#### Direct Pins
### Direct Pins
Direct pins are when you connect one side of the switch to GND and the other side to a GPIO pin on your MCU. No diode is required, but there is a 1:1 mapping between switches and pins.
@ -250,7 +250,7 @@ The following animations can be enabled:
|`static_gradient`|Enable static gradient mode. |
|`twinkle` |Enable twinkle animation mode. |
### USB
## USB
Every USB keyboard needs to have its USB parameters defined. At a minimum you need to set the Vendor ID, Product ID, and device version.
@ -268,7 +268,7 @@ Example:
The device version is a BCD (binary coded decimal) value, in the format `MMmr`, so the below value would look like `0x0100` in the generated code. This also means the maximum valid values for each part are `99.9.9`, despite it being a hexadecimal value under the hood.
### Encoders
## Encoders
This section controls the basic [rotary encoder](feature_encoders.md) support.
@ -312,7 +312,7 @@ Examples:
}
```
### Secure
## Secure
The following options can be configured: