Hopefully finally fix the corrupt LCD
The SPI bus is now selected and deselected before each set of commands. Also speed up things by buffering many commands into a single batch.
This commit is contained in:
Fred Sundvik
parent
503565d174
commit
2b24d35846
|
|
@ -37,10 +37,14 @@
|
|||
// MSB First
|
||||
// CLK Low by default
|
||||
static const SPIConfig spi1config = {
|
||||
NULL,
|
||||
/* HW dependent part.*/
|
||||
ST7565_GPIOPORT,
|
||||
ST7565_SS_PIN,
|
||||
// Operation complete callback or @p NULL.
|
||||
.end_cb = NULL,
|
||||
//The chip select line port - when not using pcs.
|
||||
.ssport = ST7565_GPIOPORT,
|
||||
// brief The chip select line pad number - when not using pcs.
|
||||
.sspad=ST7565_SS_PIN,
|
||||
// SPI initialization data.
|
||||
.tar0 =
|
||||
SPIx_CTARn_FMSZ(7)
|
||||
| SPIx_CTARn_ASC(7)
|
||||
| SPIx_CTARn_DT(7)
|
||||
|
|
@ -50,13 +54,10 @@ static const SPIConfig spi1config = {
|
|||
//SPI_CR1_BR_0
|
||||
};
|
||||
|
||||
static bool_t st7565_is_data_mode = 1;
|
||||
|
||||
static GFXINLINE void init_board(GDisplay *g) {
|
||||
(void) g;
|
||||
palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
|
||||
st7565_is_data_mode = 1;
|
||||
palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
|
||||
palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
|
||||
|
|
@ -65,7 +66,6 @@ static GFXINLINE void init_board(GDisplay *g) {
|
|||
|
||||
spiInit();
|
||||
spiStart(&SPID1, &spi1config);
|
||||
spiSelect(&SPID1);
|
||||
}
|
||||
|
||||
static GFXINLINE void post_init_board(GDisplay *g) {
|
||||
|
|
@ -86,39 +86,27 @@ static GFXINLINE void acquire_bus(GDisplay *g) {
|
|||
(void) g;
|
||||
// Only the LCD is using the SPI bus, so no need to acquire
|
||||
// spiAcquireBus(&SPID1);
|
||||
spiSelect(&SPID1);
|
||||
}
|
||||
|
||||
static GFXINLINE void release_bus(GDisplay *g) {
|
||||
(void) g;
|
||||
// Only the LCD is using the SPI bus, so no need to release
|
||||
//spiReleaseBus(&SPID1);
|
||||
spiUnselect(&SPID1);
|
||||
}
|
||||
|
||||
static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) {
|
||||
(void) g;
|
||||
if (st7565_is_data_mode) {
|
||||
// The sleeps need to be at lest 10 vs 25 ns respectively
|
||||
// So let's sleep two ticks, one tick might not be enough
|
||||
// if we are at the end of the tick
|
||||
chThdSleep(2);
|
||||
palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
|
||||
chThdSleep(2);
|
||||
st7565_is_data_mode = 0;
|
||||
}
|
||||
spiSend(&SPID1, 1, &cmd);
|
||||
static GFXINLINE void enter_data_mode(GDisplay *g) {
|
||||
palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
|
||||
}
|
||||
|
||||
static GFXINLINE void enter_cmd_mode(GDisplay *g) {
|
||||
palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
|
||||
}
|
||||
|
||||
|
||||
static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
|
||||
(void) g;
|
||||
if (!st7565_is_data_mode) {
|
||||
// The sleeps need to be at lest 10 vs 25 ns respectively
|
||||
// So let's sleep two ticks, one tick might not be enough
|
||||
// if we are at the end of the tick
|
||||
chThdSleep(2);
|
||||
palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
|
||||
chThdSleep(2);
|
||||
st7565_is_data_mode = 1;
|
||||
}
|
||||
spiSend(&SPID1, length, data);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -20,16 +20,16 @@
|
|||
/*===========================================================================*/
|
||||
|
||||
#ifndef GDISP_SCREEN_HEIGHT
|
||||
#define GDISP_SCREEN_HEIGHT 32
|
||||
#define GDISP_SCREEN_HEIGHT 32
|
||||
#endif
|
||||
#ifndef GDISP_SCREEN_WIDTH
|
||||
#define GDISP_SCREEN_WIDTH 128
|
||||
#define GDISP_SCREEN_WIDTH 128
|
||||
#endif
|
||||
#ifndef GDISP_INITIAL_CONTRAST
|
||||
#define GDISP_INITIAL_CONTRAST 0
|
||||
#define GDISP_INITIAL_CONTRAST 0
|
||||
#endif
|
||||
#ifndef GDISP_INITIAL_BACKLIGHT
|
||||
#define GDISP_INITIAL_BACKLIGHT 100
|
||||
#define GDISP_INITIAL_BACKLIGHT 100
|
||||
#endif
|
||||
|
||||
#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
|
||||
|
|
@ -40,16 +40,16 @@
|
|||
/* Driver config defaults for backward compatibility. */
|
||||
/*===========================================================================*/
|
||||
#ifndef ST7565_LCD_BIAS
|
||||
#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
|
||||
#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
|
||||
#endif
|
||||
#ifndef ST7565_ADC
|
||||
#define ST7565_ADC ST7565_ADC_NORMAL
|
||||
#define ST7565_ADC ST7565_ADC_NORMAL
|
||||
#endif
|
||||
#ifndef ST7565_COM_SCAN
|
||||
#define ST7565_COM_SCAN ST7565_COM_SCAN_INC
|
||||
#define ST7565_COM_SCAN ST7565_COM_SCAN_INC
|
||||
#endif
|
||||
#ifndef ST7565_PAGE_ORDER
|
||||
#define ST7565_PAGE_ORDER 0,1,2,3
|
||||
#define ST7565_PAGE_ORDER 0,1,2,3
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
|
|
@ -58,12 +58,24 @@
|
|||
|
||||
typedef struct{
|
||||
bool_t buffer2;
|
||||
uint8_t data_pos;
|
||||
uint8_t data[16];
|
||||
uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
|
||||
}PrivData;
|
||||
|
||||
// Some common routines and macros
|
||||
#define PRIV(g) ((PrivData*)g->priv)
|
||||
#define RAM(g) (PRIV(g)->ram)
|
||||
|
||||
static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
|
||||
PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
|
||||
}
|
||||
|
||||
static GFXINLINE void flush_cmd(GDisplay* g) {
|
||||
write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
|
||||
PRIV(g)->data_pos = 0;
|
||||
}
|
||||
|
||||
#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); }
|
||||
#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
|
||||
|
||||
|
|
@ -86,207 +98,224 @@ typedef struct{
|
|||
*/
|
||||
|
||||
LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
|
||||
// The private area is the display surface.
|
||||
g->priv = gfxAlloc(sizeof(PrivData));
|
||||
PRIV(g)->buffer2 = false;
|
||||
// The private area is the display surface.
|
||||
g->priv = gfxAlloc(sizeof(PrivData));
|
||||
PRIV(g)->buffer2 = false;
|
||||
PRIV(g)->data_pos = 0;
|
||||
|
||||
// Initialise the board interface
|
||||
init_board(g);
|
||||
// Initialise the board interface
|
||||
init_board(g);
|
||||
|
||||
// Hardware reset
|
||||
setpin_reset(g, TRUE);
|
||||
gfxSleepMilliseconds(20);
|
||||
setpin_reset(g, FALSE);
|
||||
gfxSleepMilliseconds(20);
|
||||
// Hardware reset
|
||||
setpin_reset(g, TRUE);
|
||||
gfxSleepMilliseconds(20);
|
||||
setpin_reset(g, FALSE);
|
||||
gfxSleepMilliseconds(20);
|
||||
|
||||
acquire_bus(g);
|
||||
acquire_bus(g);
|
||||
enter_cmd_mode(g);
|
||||
write_cmd(g, ST7565_DISPLAY_OFF);
|
||||
write_cmd(g, ST7565_LCD_BIAS);
|
||||
write_cmd(g, ST7565_LCD_BIAS);
|
||||
write_cmd(g, ST7565_ADC);
|
||||
write_cmd(g, ST7565_COM_SCAN);
|
||||
|
||||
|
||||
write_cmd(g, ST7565_START_LINE | 0);
|
||||
|
||||
write_cmd(g, ST7565_RESISTOR_RATIO | 0x6);
|
||||
write_cmd(g, ST7565_RESISTOR_RATIO | 0x6);
|
||||
|
||||
// turn on voltage converter (VC=1, VR=0, VF=0)
|
||||
write_cmd(g, ST7565_POWER_CONTROL | 0x04);
|
||||
delay_ms(50);
|
||||
// turn on voltage converter (VC=1, VR=0, VF=0)
|
||||
write_cmd(g, ST7565_POWER_CONTROL | 0x04);
|
||||
flush_cmd(g);
|
||||
delay_ms(50);
|
||||
|
||||
// turn on voltage regulator (VC=1, VR=1, VF=0)
|
||||
write_cmd(g, ST7565_POWER_CONTROL | 0x06);
|
||||
delay_ms(50);
|
||||
// turn on voltage regulator (VC=1, VR=1, VF=0)
|
||||
write_cmd(g, ST7565_POWER_CONTROL | 0x06);
|
||||
flush_cmd(g);
|
||||
delay_ms(50);
|
||||
|
||||
// turn on voltage follower (VC=1, VR=1, VF=1)
|
||||
write_cmd(g, ST7565_POWER_CONTROL | 0x07);
|
||||
delay_ms(50);
|
||||
// turn on voltage follower (VC=1, VR=1, VF=1)
|
||||
write_cmd(g, ST7565_POWER_CONTROL | 0x07);
|
||||
flush_cmd(g);
|
||||
delay_ms(50);
|
||||
|
||||
write_cmd(g, 0xE2);
|
||||
write_cmd(g, 0xE2);
|
||||
write_cmd(g, ST7565_COM_SCAN);
|
||||
write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST*64/101);
|
||||
//write_cmd2(g, ST7565_CONTRAST, 0);
|
||||
write_cmd(g, ST7565_DISPLAY_ON);
|
||||
write_cmd(g, ST7565_ALLON_NORMAL);
|
||||
write_cmd(g, ST7565_INVERT_DISPLAY);
|
||||
write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST*64/101);
|
||||
//write_cmd2(g, ST7565_CONTRAST, 0);
|
||||
write_cmd(g, ST7565_DISPLAY_ON);
|
||||
write_cmd(g, ST7565_ALLON_NORMAL);
|
||||
write_cmd(g, ST7565_INVERT_DISPLAY);
|
||||
|
||||
write_cmd(g, ST7565_RMW);
|
||||
write_cmd(g, ST7565_RMW);
|
||||
flush_cmd(g);
|
||||
|
||||
// Finish Init
|
||||
post_init_board(g);
|
||||
|
||||
// Release the bus
|
||||
release_bus(g);
|
||||
// Release the bus
|
||||
release_bus(g);
|
||||
|
||||
/* Initialise the GDISP structure */
|
||||
g->g.Width = GDISP_SCREEN_WIDTH;
|
||||
g->g.Height = GDISP_SCREEN_HEIGHT;
|
||||
g->g.Orientation = GDISP_ROTATE_0;
|
||||
g->g.Powermode = powerOn;
|
||||
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
|
||||
g->g.Contrast = GDISP_INITIAL_CONTRAST;
|
||||
return TRUE;
|
||||
/* Initialise the GDISP structure */
|
||||
g->g.Width = GDISP_SCREEN_WIDTH;
|
||||
g->g.Height = GDISP_SCREEN_HEIGHT;
|
||||
g->g.Orientation = GDISP_ROTATE_0;
|
||||
g->g.Powermode = powerOn;
|
||||
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
|
||||
g->g.Contrast = GDISP_INITIAL_CONTRAST;
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
#if GDISP_HARDWARE_FLUSH
|
||||
LLDSPEC void gdisp_lld_flush(GDisplay *g) {
|
||||
unsigned p;
|
||||
LLDSPEC void gdisp_lld_flush(GDisplay *g) {
|
||||
unsigned p;
|
||||
|
||||
// Don't flush if we don't need it.
|
||||
if (!(g->flags & GDISP_FLG_NEEDFLUSH))
|
||||
return;
|
||||
// Don't flush if we don't need it.
|
||||
if (!(g->flags & GDISP_FLG_NEEDFLUSH))
|
||||
return;
|
||||
|
||||
acquire_bus(g);
|
||||
unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
|
||||
for (p = 0; p < 4; p++) {
|
||||
write_cmd(g, ST7565_PAGE | (p + dstOffset));
|
||||
write_cmd(g, ST7565_COLUMN_MSB | 0);
|
||||
write_cmd(g, ST7565_COLUMN_LSB | 0);
|
||||
write_cmd(g, ST7565_RMW);
|
||||
write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
|
||||
}
|
||||
unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
|
||||
write_cmd(g, ST7565_START_LINE | line);
|
||||
PRIV(g)->buffer2 = !PRIV(g)->buffer2;
|
||||
release_bus(g);
|
||||
acquire_bus(g);
|
||||
enter_cmd_mode(g);
|
||||
unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
|
||||
for (p = 0; p < 4; p++) {
|
||||
write_cmd(g, ST7565_PAGE | (p + dstOffset));
|
||||
write_cmd(g, ST7565_COLUMN_MSB | 0);
|
||||
write_cmd(g, ST7565_COLUMN_LSB | 0);
|
||||
write_cmd(g, ST7565_RMW);
|
||||
flush_cmd(g);
|
||||
enter_data_mode(g);
|
||||
write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
|
||||
enter_cmd_mode(g);
|
||||
}
|
||||
unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
|
||||
write_cmd(g, ST7565_START_LINE | line);
|
||||
flush_cmd(g);
|
||||
PRIV(g)->buffer2 = !PRIV(g)->buffer2;
|
||||
release_bus(g);
|
||||
|
||||
g->flags &= ~GDISP_FLG_NEEDFLUSH;
|
||||
}
|
||||
g->flags &= ~GDISP_FLG_NEEDFLUSH;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if GDISP_HARDWARE_DRAWPIXEL
|
||||
LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
|
||||
coord_t x, y;
|
||||
LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
|
||||
coord_t x, y;
|
||||
|
||||
switch(g->g.Orientation) {
|
||||
default:
|
||||
case GDISP_ROTATE_0:
|
||||
x = g->p.x;
|
||||
y = g->p.y;
|
||||
break;
|
||||
case GDISP_ROTATE_90:
|
||||
x = g->p.y;
|
||||
y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
|
||||
break;
|
||||
case GDISP_ROTATE_180:
|
||||
x = GDISP_SCREEN_WIDTH-1 - g->p.x;
|
||||
y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
||||
break;
|
||||
case GDISP_ROTATE_270:
|
||||
x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
||||
y = g->p.x;
|
||||
break;
|
||||
}
|
||||
if (gdispColor2Native(g->p.color) != Black)
|
||||
RAM(g)[xyaddr(x, y)] |= xybit(y);
|
||||
else
|
||||
RAM(g)[xyaddr(x, y)] &= ~xybit(y);
|
||||
g->flags |= GDISP_FLG_NEEDFLUSH;
|
||||
}
|
||||
switch(g->g.Orientation) {
|
||||
default:
|
||||
case GDISP_ROTATE_0:
|
||||
x = g->p.x;
|
||||
y = g->p.y;
|
||||
break;
|
||||
case GDISP_ROTATE_90:
|
||||
x = g->p.y;
|
||||
y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
|
||||
break;
|
||||
case GDISP_ROTATE_180:
|
||||
x = GDISP_SCREEN_WIDTH-1 - g->p.x;
|
||||
y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
||||
break;
|
||||
case GDISP_ROTATE_270:
|
||||
x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
||||
y = g->p.x;
|
||||
break;
|
||||
}
|
||||
if (gdispColor2Native(g->p.color) != Black)
|
||||
RAM(g)[xyaddr(x, y)] |= xybit(y);
|
||||
else
|
||||
RAM(g)[xyaddr(x, y)] &= ~xybit(y);
|
||||
g->flags |= GDISP_FLG_NEEDFLUSH;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if GDISP_HARDWARE_PIXELREAD
|
||||
LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
|
||||
coord_t x, y;
|
||||
LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
|
||||
coord_t x, y;
|
||||
|
||||
switch(g->g.Orientation) {
|
||||
default:
|
||||
case GDISP_ROTATE_0:
|
||||
x = g->p.x;
|
||||
y = g->p.y;
|
||||
break;
|
||||
case GDISP_ROTATE_90:
|
||||
x = g->p.y;
|
||||
y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
|
||||
break;
|
||||
case GDISP_ROTATE_180:
|
||||
x = GDISP_SCREEN_WIDTH-1 - g->p.x;
|
||||
y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
||||
break;
|
||||
case GDISP_ROTATE_270:
|
||||
x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
||||
y = g->p.x;
|
||||
break;
|
||||
}
|
||||
return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
|
||||
}
|
||||
switch(g->g.Orientation) {
|
||||
default:
|
||||
case GDISP_ROTATE_0:
|
||||
x = g->p.x;
|
||||
y = g->p.y;
|
||||
break;
|
||||
case GDISP_ROTATE_90:
|
||||
x = g->p.y;
|
||||
y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
|
||||
break;
|
||||
case GDISP_ROTATE_180:
|
||||
x = GDISP_SCREEN_WIDTH-1 - g->p.x;
|
||||
y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
||||
break;
|
||||
case GDISP_ROTATE_270:
|
||||
x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
|
||||
y = g->p.x;
|
||||
break;
|
||||
}
|
||||
return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
|
||||
LLDSPEC void gdisp_lld_control(GDisplay *g) {
|
||||
switch(g->p.x) {
|
||||
case GDISP_CONTROL_POWER:
|
||||
if (g->g.Powermode == (powermode_t)g->p.ptr)
|
||||
return;
|
||||
switch((powermode_t)g->p.ptr) {
|
||||
case powerOff:
|
||||
case powerSleep:
|
||||
case powerDeepSleep:
|
||||
acquire_bus(g);
|
||||
write_cmd(g, ST7565_DISPLAY_OFF);
|
||||
release_bus(g);
|
||||
break;
|
||||
case powerOn:
|
||||
acquire_bus(g);
|
||||
write_cmd(g, ST7565_DISPLAY_ON);
|
||||
release_bus(g);
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
g->g.Powermode = (powermode_t)g->p.ptr;
|
||||
return;
|
||||
LLDSPEC void gdisp_lld_control(GDisplay *g) {
|
||||
switch(g->p.x) {
|
||||
case GDISP_CONTROL_POWER:
|
||||
if (g->g.Powermode == (powermode_t)g->p.ptr)
|
||||
return;
|
||||
switch((powermode_t)g->p.ptr) {
|
||||
case powerOff:
|
||||
case powerSleep:
|
||||
case powerDeepSleep:
|
||||
acquire_bus(g);
|
||||
enter_cmd_mode(g);
|
||||
write_cmd(g, ST7565_DISPLAY_OFF);
|
||||
flush_cmd(g);
|
||||
release_bus(g);
|
||||
break;
|
||||
case powerOn:
|
||||
acquire_bus(g);
|
||||
enter_cmd_mode(g);
|
||||
write_cmd(g, ST7565_DISPLAY_ON);
|
||||
flush_cmd(g);
|
||||
release_bus(g);
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
g->g.Powermode = (powermode_t)g->p.ptr;
|
||||
return;
|
||||
|
||||
case GDISP_CONTROL_ORIENTATION:
|
||||
if (g->g.Orientation == (orientation_t)g->p.ptr)
|
||||
return;
|
||||
switch((orientation_t)g->p.ptr) {
|
||||
/* Rotation is handled by the drawing routines */
|
||||
case GDISP_ROTATE_0:
|
||||
case GDISP_ROTATE_180:
|
||||
g->g.Height = GDISP_SCREEN_HEIGHT;
|
||||
g->g.Width = GDISP_SCREEN_WIDTH;
|
||||
break;
|
||||
case GDISP_ROTATE_90:
|
||||
case GDISP_ROTATE_270:
|
||||
g->g.Height = GDISP_SCREEN_WIDTH;
|
||||
g->g.Width = GDISP_SCREEN_HEIGHT;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
g->g.Orientation = (orientation_t)g->p.ptr;
|
||||
return;
|
||||
case GDISP_CONTROL_ORIENTATION:
|
||||
if (g->g.Orientation == (orientation_t)g->p.ptr)
|
||||
return;
|
||||
switch((orientation_t)g->p.ptr) {
|
||||
/* Rotation is handled by the drawing routines */
|
||||
case GDISP_ROTATE_0:
|
||||
case GDISP_ROTATE_180:
|
||||
g->g.Height = GDISP_SCREEN_HEIGHT;
|
||||
g->g.Width = GDISP_SCREEN_WIDTH;
|
||||
break;
|
||||
case GDISP_ROTATE_90:
|
||||
case GDISP_ROTATE_270:
|
||||
g->g.Height = GDISP_SCREEN_WIDTH;
|
||||
g->g.Width = GDISP_SCREEN_HEIGHT;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
g->g.Orientation = (orientation_t)g->p.ptr;
|
||||
return;
|
||||
|
||||
case GDISP_CONTROL_CONTRAST:
|
||||
if ((unsigned)g->p.ptr > 100)
|
||||
g->p.ptr = (void *)100;
|
||||
acquire_bus(g);
|
||||
write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr)<<6)/101) & 0x3F);
|
||||
release_bus(g);
|
||||
g->g.Contrast = (unsigned)g->p.ptr;
|
||||
return;
|
||||
}
|
||||
}
|
||||
case GDISP_CONTROL_CONTRAST:
|
||||
if ((unsigned)g->p.ptr > 100)
|
||||
g->p.ptr = (void *)100;
|
||||
acquire_bus(g);
|
||||
enter_cmd_mode(g);
|
||||
write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr)<<6)/101) & 0x3F);
|
||||
flush_cmd(g);
|
||||
release_bus(g);
|
||||
g->g.Contrast = (unsigned)g->p.ptr;
|
||||
return;
|
||||
}
|
||||
}
|
||||
#endif // GDISP_NEED_CONTROL
|
||||
|
||||
#endif // GFX_USE_GDISP
|
||||
|
|
|
|||
Loading…
Reference in New Issue