diff --git a/builddefs/common_features.mk b/builddefs/common_features.mk
index d0702f3ad1..9ac95dae82 100644
--- a/builddefs/common_features.mk
+++ b/builddefs/common_features.mk
@@ -744,17 +744,28 @@ endif
VALID_OLED_DRIVER_TYPES := SSD1306 custom
OLED_DRIVER ?= SSD1306
+VALID_OLED_TRANSPORT_TYPES := i2c spi custom
+OLED_TRANSPORT ?= i2c
ifeq ($(strip $(OLED_ENABLE)), yes)
ifeq ($(filter $(OLED_DRIVER),$(VALID_OLED_DRIVER_TYPES)),)
$(call CATASTROPHIC_ERROR,Invalid OLED_DRIVER,OLED_DRIVER="$(OLED_DRIVER)" is not a valid OLED driver)
else
- OPT_DEFS += -DOLED_ENABLE
- COMMON_VPATH += $(DRIVER_PATH)/oled
+ ifeq ($(filter $(OLED_TRANSPORT),$(VALID_OLED_TRANSPORT_TYPES)),)
+ $(call CATASTROPHIC_ERROR,Invalid OLED_TRANSPORT,OLED_TRANSPORT="$(OLED_TRANSPORT)" is not a valid OLED transport)
+ else
+ OPT_DEFS += -DOLED_ENABLE
+ COMMON_VPATH += $(DRIVER_PATH)/oled
+ ifneq ($(strip $(OLED_DRIVER)), custom)
+ SRC += oled_driver.c
+ endif
- OPT_DEFS += -DOLED_DRIVER_$(strip $(shell echo $(OLED_DRIVER) | tr '[:lower:]' '[:upper:]'))
- ifeq ($(strip $(OLED_DRIVER)), SSD1306)
- SRC += ssd1306_sh1106.c
- QUANTUM_LIB_SRC += i2c_master.c
+ OPT_DEFS += -DOLED_TRANSPORT_$(strip $(shell echo $(OLED_TRANSPORT) | tr '[:lower:]' '[:upper:]'))
+ ifeq ($(strip $(OLED_TRANSPORT)), i2c)
+ QUANTUM_LIB_SRC += i2c_master.c
+ endif
+ ifeq ($(strip $(OLED_TRANSPORT)), spi)
+ QUANTUM_LIB_SRC += spi_master.c
+ endif
endif
endif
endif
diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md
index dea9cb8074..a62294b23a 100644
--- a/docs/feature_oled_driver.md
+++ b/docs/feature_oled_driver.md
@@ -2,15 +2,18 @@
## Supported Hardware
-OLED modules using SSD1306 or SH1106 driver ICs, communicating over I2C.
+OLED modules using SSD1306, SH1106 or SH1107 driver ICs, communicating over I2C or SPI.
Tested combinations:
-|IC |Size |Platform|Notes |
-|---------|------|--------|------------------------|
-|SSD1306 |128x32|AVR |Primary support |
-|SSD1306 |128x64|AVR |Verified working |
-|SSD1306 |128x32|Arm | |
-|SH1106 |128x64|AVR |No rotation or scrolling|
+|IC |Size |Platform|Notes |
+|---------|-------|--------|------------------------|
+|SSD1306 |128x32 |AVR |Primary support |
+|SSD1306 |128x64 |AVR |Verified working |
+|SSD1306 |128x32 |Arm | |
+|SH1106 |128x64 |AVR |No scrolling |
+|SH1107 |64x128 |AVR |No scrolling |
+|SH1107 |64x128 |Arm |No scrolling |
+|SH1107 |128x128|Arm |No scrolling |
Hardware configurations using Arm-based microcontrollers or different sizes of OLED modules may be compatible, but are untested.
@@ -23,15 +26,26 @@ OLED_ENABLE = yes
```
## OLED type
-|OLED Driver |Supported Device |
-|-------------------|---------------------------|
-|SSD1306 (default) |For both SSD1306 and SH1106|
+
+|OLED Driver |Supported Device |
+|-------------------|------------------------------------|
+|SSD1306 (default) |For both SSD1306, SH1106, and SH1107|
e.g.
```make
OLED_DRIVER = SSD1306
```
+|OLED Transport | |
+|---------------|------------------------------------------------|
+|i2c (default) | Uses I2C for communication with the OLED panel |
+|spi | Uses SPI for communication with the OLED panel |
+
+e.g.
+```make
+OLED_TRANSPORT = i2c
+```
+
Then in your `keymap.c` file, implement the OLED task call. This example assumes your keymap has three layers named `_QWERTY`, `_FN` and `_ADJ`:
```c
@@ -159,32 +173,57 @@ These configuration options should be placed in `config.h`. Example:
#define OLED_BRIGHTNESS 128
```
+|Define |Default |Description |
+|---------------------------|-------------------------------|---------------------------------------------------------------------------------------------------------------------|
+|`OLED_BRIGHTNESS` |`255` |The default brightness level of the OLED, from 0 to 255. |
+|`OLED_COLUMN_OFFSET` |`0` |Shift output to the right this many pixels.
Useful for 128x64 displays centered on a 132x64 SH1106 IC. |
+|`OLED_DISPLAY_CLOCK` |`0x80` |Set the display clock divide ratio/oscillator frequency. |
+|`OLED_FONT_H` |`"glcdfont.c"` |The font code file to use for custom fonts |
+|`OLED_FONT_START` |`0` |The starting character index for custom fonts |
+|`OLED_FONT_END` |`223` |The ending character index for custom fonts |
+|`OLED_FONT_WIDTH` |`6` |The font width |
+|`OLED_FONT_HEIGHT` |`8` |The font height (untested) |
+|`OLED_IC` |`OLED_IC_SSD1306` |Set to `OLED_IC_SH1106` or `OLED_IC_SH1107` if the corresponding controller chip is used. |
+|`OLED_FADE_OUT` |*Not defined* |Enables fade out animation. Use together with `OLED_TIMEOUT`. |
+|`OLED_FADE_OUT_INTERVAL` |`0` |The speed of fade out animation, from 0 to 15. Larger values are slower. |
+|`OLED_SCROLL_TIMEOUT` |`0` |Scrolls the OLED screen after 0ms of OLED inactivity. Helps reduce OLED Burn-in. Set to 0 to disable. |
+|`OLED_SCROLL_TIMEOUT_RIGHT`|*Not defined* |Scroll timeout direction is right when defined, left when undefined. |
+|`OLED_TIMEOUT` |`60000` |Turns off the OLED screen after 60000ms of screen update inactivity. Helps reduce OLED Burn-in. Set to 0 to disable. |
+|`OLED_UPDATE_INTERVAL` |`0` (`50` for split keyboards) |Set the time interval for updating the OLED display in ms. This will improve the matrix scan rate. |
+|`OLED_UPDATE_PROCESS_LIMIT'|`1` |Set the number of dirty blocks to render per loop. Increasing may degrade performance. |
+
+### I2C Configuration
|Define |Default |Description |
|---------------------------|-----------------|--------------------------------------------------------------------------------------------------------------------------|
|`OLED_DISPLAY_ADDRESS` |`0x3C` |The i2c address of the OLED Display |
-|`OLED_FONT_H` |`"glcdfont.c"` |The font code file to use for custom fonts |
-|`OLED_FONT_START` |`0` |The starting character index for custom fonts |
-|`OLED_FONT_END` |`223` |The ending character index for custom fonts |
-|`OLED_FONT_WIDTH` |`6` |The font width |
-|`OLED_FONT_HEIGHT` |`8` |The font height (untested) |
-|`OLED_TIMEOUT` |`60000` |Turns off the OLED screen after 60000ms of screen update inactivity. Helps reduce OLED Burn-in. Set to 0 to disable. |
-|`OLED_FADE_OUT` |*Not defined* |Enables fade out animation. Use together with `OLED_TIMEOUT`. |
-|`OLED_FADE_OUT_INTERVAL` |`0` |The speed of fade out animation, from 0 to 15. Larger values are slower. |
-|`OLED_SCROLL_TIMEOUT` |`0` |Scrolls the OLED screen after 0ms of OLED inactivity. Helps reduce OLED Burn-in. Set to 0 to disable. |
-|`OLED_SCROLL_TIMEOUT_RIGHT`|*Not defined* |Scroll timeout direction is right when defined, left when undefined. |
-|`OLED_IC` |`OLED_IC_SSD1306`|Set to `OLED_IC_SH1106` if you're using the SH1106 OLED controller. |
-|`OLED_COLUMN_OFFSET` |`0` |(SH1106 only.) Shift output to the right this many pixels.
Useful for 128x64 displays centered on a 132x64 SH1106 IC.|
-|`OLED_BRIGHTNESS` |`255` |The default brightness level of the OLED, from 0 to 255. |
-|`OLED_UPDATE_INTERVAL` |`0` |Set the time interval for updating the OLED display in ms. This will improve the matrix scan rate. |
- ## 128x64 & Custom sized OLED Displays
+### SPI Configuration
- The default display size for this feature is 128x32 and all necessary defines are precalculated with that in mind. We have added a define, `OLED_DISPLAY_128X64`, to switch all the values to be used in a 128x64 display, as well as added a custom define, `OLED_DISPLAY_CUSTOM`, that allows you to provide the necessary values to the driver.
+|Define |Default |Description |
+|---------------------------|-----------------|--------------------------------------------------------------------------------------------------------------------------|
+|`OLED_DC_PIN` | Required |The pin used for the DC connection of the OLED Display. |
+|`OLED_CS_PIN` | Required |The pin used for the CS connection of the OLED Display. |
+|`OLED_RST_PIN` | *Not defined* |The pin used for the RST connection of the OLED Display (may be left undefined if the RST pin is not connected). |
+|`OLED_SPI_MODE` |`3` (default) |The SPI Mode for the OLED Display (not typically changed). |
+|`OLED_SPI_DIVISOR` |`2` (default) |The SPI Multiplier to use for the OLED Display. |
+
+## 128x64 & Custom sized OLED Displays
+
+ The default display size for this feature is 128x32, and the defaults are set with that in mind. However, there are a number of additional presets for common sizes that we have added. You can define one of these values to use the presets. If your display doesn't match one of these presets, you can define `OLED_DISPLAY_CUSTOM` to manually specify all of the values.
+
+|Define |Default |Description |
+|----------------------|---------------|---------------------------------------------------------------------------------------------------------------------------------------|
+|`OLED_DISPLAY_128X64` |*Not defined* |Changes the display defines for use with 128x64 displays. |
+|`OLED_DISPLAY_64X32` |*Not defined* |Changes the display defines for use with 64x32 displays. |
+|`OLED_DISPLAY_64X48` |*Not defined* |Changes the display defines for use with 64x48 displays. |
+|`OLED_DISPLAY_64X128` |*Not defined* |Changes the display defines for use with 64x128 displays. |
+|`OLED_DISPLAY_128X128`|*Not defined* |Changes the display defines for use with 128x128 displays. |
+|`OLED_DISPLAY_CUSTOM` |*Not defined* |Changes the display defines for use with custom displays.
Requires user to implement the below defines. |
+
+!> 64x128 and 128x128 displays default to the SH1107 IC type, as these heights are not supported by the other IC types.
|Define |Default |Description |
-|---------------------|---------------|----------------------------------------------------------------------------------------------------------------------------------------|
-|`OLED_DISPLAY_128X64`|*Not defined* |Changes the display defines for use with 128x64 displays. |
-|`OLED_DISPLAY_CUSTOM`|*Not defined* |Changes the display defines for use with custom displays.
Requires user to implement the below defines. |
+| --------------------|---------------|----------------------------------------------------------------------------------------------------------------------------------------|
|`OLED_DISPLAY_WIDTH` |`128` |The width of the OLED display. |
|`OLED_DISPLAY_HEIGHT`|`32` |The height of the OLED display. |
|`OLED_MATRIX_SIZE` |`512` |The local buffer size to allocate.
`(OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)`. |
@@ -192,14 +231,13 @@ These configuration options should be placed in `config.h`. Example:
|`OLED_BLOCK_COUNT` |`16` |The number of blocks the display is divided into for dirty rendering.
`(sizeof(OLED_BLOCK_TYPE) * 8)`. |
|`OLED_BLOCK_SIZE` |`32` |The size of each block for dirty rendering
`(OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)`. |
|`OLED_COM_PINS` |`COM_PINS_SEQ` |How the SSD1306 chip maps it's memory to display.
Options are `COM_PINS_SEQ`, `COM_PINS_ALT`, `COM_PINS_SEQ_LR`, & `COM_PINS_ALT_LR`.|
+|`OLED_COM_PIN_COUNT` |*Not defined* |Number of COM pins supported by the controller.
If not defined, the value appropriate for the defined `OLED_IC` is used. |
+|`OLED_COM_PIN_OFFSET`|`0` |Number of the first COM pin used by the OLED matrix. |
|`OLED_SOURCE_MAP` |`{ 0, ... N }` |Precalculated source array to use for mapping source buffer to target OLED memory in 90 degree rendering. |
|`OLED_TARGET_MAP` |`{ 24, ... N }`|Precalculated target array to use for mapping source buffer to target OLED memory in 90 degree rendering. |
-
### 90 Degree Rotation - Technical Mumbo Jumbo
-!> Rotation is unsupported on the SH1106.
-
```c
// OLED Rotation enum values are flags
typedef enum {
@@ -210,7 +248,7 @@ typedef enum {
} oled_rotation_t;
```
-OLED displays driven by SSD1306 drivers only natively support in hardware 0 degree and 180 degree rendering. This feature is done in software and not free. Using this feature will increase the time to calculate what data to send over i2c to the OLED. If you are strapped for cycles, this can cause keycodes to not register. In testing however, the rendering time on an ATmega32U4 board only went from 2ms to 5ms and keycodes not registering was only noticed once we hit 15ms.
+OLED displays driven by SSD1306, SH1106 or SH1107 drivers only natively support in hardware 0 degree and 180 degree rendering. This feature is done in software and not free. Using this feature will increase the time to calculate what data to send over i2c to the OLED. If you are strapped for cycles, this can cause keycodes to not register. In testing however, the rendering time on an ATmega32U4 board only went from 2ms to 5ms and keycodes not registering was only noticed once we hit 15ms.
90 degree rotation is achieved by using bitwise operations to rotate each 8 block of memory and uses two precalculated arrays to remap buffer memory to OLED memory. The memory map defines are precalculated for remap performance and are calculated based on the display height, width, and block size. For example, in the 128x32 implementation with a `uint8_t` block type, we have a 64 byte block size. This gives us eight 8 byte blocks that need to be rotated and rendered. The OLED renders horizontally two 8 byte blocks before moving down a page, e.g:
@@ -232,6 +270,8 @@ However the local buffer is stored as if it was Height x Width display instead o
So those precalculated arrays just index the memory offsets in the order in which each one iterates its data.
+Rotation on SH1106 and SH1107 is noticeably less efficient than on SSD1306, because these controllers do not support the “horizontal addressing mode”, which allows transferring the data for the whole rotated block at once; instead, separate address setup commands for every page in the block are required. The screen refresh time for SH1107 is therefore about 45% higher than for a same size screen with SSD1306 when using STM32 MCUs (on AVR the slowdown is about 20%, because the code which actually rotates the bitmap consumes more time).
+
## OLED API
```c
@@ -253,6 +293,11 @@ bool oled_init(oled_rotation_t rotation);
oled_rotation_t oled_init_kb(oled_rotation_t rotation);
oled_rotation_t oled_init_user(oled_rotation_t rotation);
+// Send commands/data to screen
+bool oled_send_cmd(const uint8_t *data, uint16_t size);
+bool oled_send_cmd_P(const uint8_t *data, uint16_t size);
+bool oled_send_data(const uint8_t *data, uint16_t size);
+
// Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering
void oled_clear(void);
@@ -386,7 +431,9 @@ uint8_t oled_max_chars(void);
uint8_t oled_max_lines(void);
```
-!> Scrolling and rotation are unsupported on the SH1106.
+!> Scrolling is unsupported on the SH1106 and SH1107.
+
+!> Scrolling does not work properly on the SSD1306 if the display width is smaller than 128.
## SSD1306.h Driver Conversion Guide
diff --git a/drivers/oled/ssd1306_sh1106.c b/drivers/oled/oled_driver.c
similarity index 71%
rename from drivers/oled/ssd1306_sh1106.c
rename to drivers/oled/oled_driver.c
index 342920572e..e50a881120 100644
--- a/drivers/oled/ssd1306_sh1106.c
+++ b/drivers/oled/oled_driver.c
@@ -14,20 +14,23 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
-#include "i2c_master.h"
+
+#if defined(OLED_TRANSPORT_SPI)
+# include "spi_master.h"
+#elif defined(OLED_TRANSPORT_I2C)
+# include "i2c_master.h"
+#endif
#include "oled_driver.h"
#include OLED_FONT_H
#include "timer.h"
#include "print.h"
-
#include
-
#include "progmem.h"
-
-#include "keyboard.h"
+#include "wait.h"
// Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
// for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf
+// for SH1107: https://www.displayfuture.com/Display/datasheet/controller/SH1107.pdf
// Fundamental Commands
#define CONTRAST 0x81
@@ -82,6 +85,11 @@ along with this program. If not, see .
// Charge Pump Commands
#define CHARGE_PUMP 0x8D
+// Commands specific to the SH1107 chip
+#define SH1107_DISPLAY_START_LINE 0xDC
+#define SH1107_MEMORY_MODE_PAGE 0x20
+#define SH1107_MEMORY_MODE_VERTICAL 0x21
+
// Misc defines
#ifndef OLED_BLOCK_COUNT
# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)
@@ -89,19 +97,43 @@ along with this program. If not, see .
#ifndef OLED_BLOCK_SIZE
# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
#endif
+// Default display clock
+#if !defined(OLED_DISPLAY_CLOCK)
+# define OLED_DISPLAY_CLOCK 0x80
+#endif
+// Default VCOMH deselect value
+#if !defined(OLED_VCOM_DETECT)
+# define OLED_VCOM_DETECT 0x20
+#endif
+#if !defined(OLED_PRE_CHARGE_PERIOD)
+# define OLED_PRE_CHARGE_PERIOD 0xF1
+#endif
+
#define OLED_ALL_BLOCKS_MASK (((((OLED_BLOCK_TYPE)1 << (OLED_BLOCK_COUNT - 1)) - 1) << 1) | 1)
+#define OLED_IC_HAS_HORIZONTAL_MODE (OLED_IC == OLED_IC_SSD1306)
+#define OLED_IC_COM_PINS_ARE_COLUMNS (OLED_IC == OLED_IC_SH1107)
+
+#ifndef OLED_COM_PIN_COUNT
+# if OLED_IC == OLED_IC_SSD1306
+# define OLED_COM_PIN_COUNT 64
+# elif OLED_IC == OLED_IC_SH1106
+# define OLED_COM_PIN_COUNT 64
+# elif OLED_IC == OLED_IC_SH1107
+# define OLED_COM_PIN_COUNT 128
+# else
+# error Invalid OLED_IC value
+# endif
+#endif
+
+#ifndef OLED_COM_PIN_OFFSET
+# define OLED_COM_PIN_OFFSET 0
+#endif
+
// i2c defines
#define I2C_CMD 0x00
#define I2C_DATA 0x40
-#if defined(__AVR__)
-# define I2C_TRANSMIT_P(data) i2c_transmit_P((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), OLED_I2C_TIMEOUT)
-#else // defined(__AVR__)
-# define I2C_TRANSMIT_P(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), OLED_I2C_TIMEOUT)
-#endif // defined(__AVR__)
-#define I2C_TRANSMIT(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), OLED_I2C_TIMEOUT)
-#define I2C_WRITE_REG(mode, data, size) i2c_writeReg((OLED_DISPLAY_ADDRESS << 1), mode, data, size, OLED_I2C_TIMEOUT)
#define HAS_FLAGS(bits, flags) ((bits & flags) == flags)
@@ -110,7 +142,7 @@ along with this program. If not, see .
// parts of the display unusable or don't get cleared correctly
// and also allows for drawing & inverting
uint8_t oled_buffer[OLED_MATRIX_SIZE];
-uint8_t * oled_cursor;
+uint8_t *oled_cursor;
OLED_BLOCK_TYPE oled_dirty = 0;
bool oled_initialized = false;
bool oled_active = false;
@@ -132,24 +164,118 @@ uint32_t oled_scroll_timeout;
uint16_t oled_update_timeout;
#endif
-// Internal variables to reduce math instructions
+#if defined(OLED_TRANSPORT_SPI)
+# ifndef OLED_DC_PIN
+# error "The OLED driver in SPI needs a D/C pin defined"
+# endif
+# ifndef OLED_CS_PIN
+# error "The OLED driver in SPI needs a CS pin defined"
+# endif
+# ifndef OLED_SPI_MODE
+# define OLED_SPI_MODE 3
+# endif
+# ifndef OLED_SPI_DIVISOR
+# define OLED_SPI_DIVISOR 2
+# endif
+#elif defined(OLED_TRANSPORT_I2C)
+# if !defined(OLED_DISPLAY_ADDRESS)
+# define OLED_DISPLAY_ADDRESS 0x3C
+# endif
+#endif
+// Transmit/Write Funcs.
+__attribute__((weak)) bool oled_send_cmd(const uint8_t *data, uint16_t size) {
+#if defined(OLED_TRANSPORT_SPI)
+ if (!spi_start(OLED_CS_PIN, false, OLED_SPI_MODE, OLED_SPI_DIVISOR)) {
+ return false;
+ }
+ // Command Mode
+ writePinLow(OLED_DC_PIN);
+ // Send the commands
+ if (spi_transmit(&data[1], size - 1) != SPI_STATUS_SUCCESS) {
+ spi_stop();
+ return false;
+ }
+ spi_stop();
+ return true;
+#elif defined(OLED_TRANSPORT_I2C)
+ i2c_status_t status = i2c_transmit((OLED_DISPLAY_ADDRESS << 1), data, size, OLED_I2C_TIMEOUT);
+
+ return (status == I2C_STATUS_SUCCESS);
+#endif
+}
+
+__attribute__((weak)) bool oled_send_cmd_P(const uint8_t *data, uint16_t size) {
#if defined(__AVR__)
-// identical to i2c_transmit, but for PROGMEM since all initialization is in PROGMEM arrays currently
-// probably should move this into i2c_master...
-static i2c_status_t i2c_transmit_P(uint8_t address, const uint8_t *data, uint16_t length, uint16_t timeout) {
- i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
+# if defined(OLED_TRANSPORT_SPI)
+ if (!spi_start(OLED_CS_PIN, false, OLED_SPI_MODE, OLED_SPI_DIVISOR)) {
+ return false;
+ }
+ spi_status_t status = SPI_STATUS_SUCCESS;
+ // Command Mode
+ writePinLow(OLED_DC_PIN);
+ // Send the commands
+ for (uint16_t i = 1; i < size && status >= 0; i++) {
+ status = spi_write(pgm_read_byte((const char *)&data[i]));
+ }
+ spi_stop();
+ return (status >= 0);
+# elif defined(OLED_TRANSPORT_I2C)
+ i2c_status_t status = i2c_start((OLED_DISPLAY_ADDRESS << 1) | I2C_WRITE, OLED_I2C_TIMEOUT);
- for (uint16_t i = 0; i < length && status >= 0; i++) {
- status = i2c_write(pgm_read_byte((const char *)data++), timeout);
- if (status) break;
+ for (uint16_t i = 0; i < size && status >= 0; i++) {
+ status = i2c_write(pgm_read_byte((const char *)data++), OLED_I2C_TIMEOUT);
}
i2c_stop();
- return status;
-}
+ return (status == I2C_STATUS_SUCCESS);
+# endif
+#else
+ return oled_send_cmd(data, size);
#endif
+}
+
+__attribute__((weak)) bool oled_send_data(const uint8_t *data, uint16_t size) {
+#if defined(OLED_TRANSPORT_SPI)
+ if (!spi_start(OLED_CS_PIN, false, OLED_SPI_MODE, OLED_SPI_DIVISOR)) {
+ return false;
+ }
+ // Data Mode
+ writePinHigh(OLED_DC_PIN);
+ // Send the commands
+ if (spi_transmit(data, size) != SPI_STATUS_SUCCESS) {
+ spi_stop();
+ return false;
+ }
+ spi_stop();
+ return true;
+#elif defined(OLED_TRANSPORT_I2C)
+ i2c_status_t status = i2c_writeReg((OLED_DISPLAY_ADDRESS << 1), I2C_DATA, data, size, OLED_I2C_TIMEOUT);
+ return (status == I2C_STATUS_SUCCESS);
+#endif
+}
+
+__attribute__((weak)) void oled_driver_init(void) {
+#if defined(OLED_TRANSPORT_SPI)
+ spi_init();
+ setPinOutput(OLED_CS_PIN);
+ writePinHigh(OLED_CS_PIN);
+
+ setPinOutput(OLED_DC_PIN);
+ writePinLow(OLED_DC_PIN);
+# ifdef OLED_RST_PIN
+ /* Reset device */
+ setPinOutput(OLED_RST_PIN);
+ writePinLow(OLED_RST_PIN);
+ wait_ms(20);
+ writePinHigh(OLED_RST_PIN);
+ wait_ms(20);
+# endif
+#elif defined(OLED_TRANSPORT_I2C)
+ i2c_init();
+#endif
+}
// Flips the rendering bits for a character at the current cursor position
static void InvertCharacter(uint8_t *cursor) {
@@ -161,7 +287,7 @@ static void InvertCharacter(uint8_t *cursor) {
}
bool oled_init(oled_rotation_t rotation) {
-#if defined(USE_I2C) && defined(SPLIT_KEYBOARD)
+#if defined(USE_I2C) && defined(SPLIT_KEYBOARD) && defined(OLED_TRANSPORT_I2C)
if (!is_keyboard_master()) {
return true;
}
@@ -173,47 +299,61 @@ bool oled_init(oled_rotation_t rotation) {
} else {
oled_rotation_width = OLED_DISPLAY_HEIGHT;
}
- i2c_init();
+ oled_driver_init();
static const uint8_t PROGMEM display_setup1[] = {
I2C_CMD,
DISPLAY_OFF,
DISPLAY_CLOCK,
- 0x80,
+ OLED_DISPLAY_CLOCK,
MULTIPLEX_RATIO,
+#if OLED_IC_COM_PINS_ARE_COLUMNS
+ OLED_DISPLAY_WIDTH - 1,
+#else
OLED_DISPLAY_HEIGHT - 1,
- DISPLAY_OFFSET,
+#endif
+#if OLED_IC == OLED_IC_SH1107
+ SH1107_DISPLAY_START_LINE,
0x00,
+#else
DISPLAY_START_LINE | 0x00,
+#endif
CHARGE_PUMP,
0x14,
-#if (OLED_IC != OLED_IC_SH1106)
+#if OLED_IC_HAS_HORIZONTAL_MODE
// MEMORY_MODE is unsupported on SH1106 (Page Addressing only)
MEMORY_MODE,
0x00, // Horizontal addressing mode
+#elif OLED_IC == OLED_IC_SH1107
+ // Page addressing mode
+ SH1107_MEMORY_MODE_PAGE,
#endif
};
- if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_cmd_P(display_setup1, ARRAY_SIZE(display_setup1))) {
print("oled_init cmd set 1 failed\n");
return false;
}
if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) {
- static const uint8_t PROGMEM display_normal[] = {I2C_CMD, SEGMENT_REMAP_INV, COM_SCAN_DEC};
- if (I2C_TRANSMIT_P(display_normal) != I2C_STATUS_SUCCESS) {
+ static const uint8_t PROGMEM display_normal[] = {
+ I2C_CMD, SEGMENT_REMAP_INV, COM_SCAN_DEC, DISPLAY_OFFSET, OLED_COM_PIN_OFFSET,
+ };
+ if (!oled_send_cmd_P(display_normal, ARRAY_SIZE(display_normal))) {
print("oled_init cmd normal rotation failed\n");
return false;
}
} else {
- static const uint8_t PROGMEM display_flipped[] = {I2C_CMD, SEGMENT_REMAP, COM_SCAN_INC};
- if (I2C_TRANSMIT_P(display_flipped) != I2C_STATUS_SUCCESS) {
+ static const uint8_t PROGMEM display_flipped[] = {
+ I2C_CMD, SEGMENT_REMAP, COM_SCAN_INC, DISPLAY_OFFSET, (OLED_COM_PIN_COUNT - OLED_COM_PIN_OFFSET) % OLED_COM_PIN_COUNT,
+ };
+ if (!oled_send_cmd_P(display_flipped, ARRAY_SIZE(display_flipped))) {
print("display_flipped failed\n");
return false;
}
}
- static const uint8_t PROGMEM display_setup2[] = {I2C_CMD, COM_PINS, OLED_COM_PINS, CONTRAST, OLED_BRIGHTNESS, PRE_CHARGE_PERIOD, 0xF1, VCOM_DETECT, 0x20, DISPLAY_ALL_ON_RESUME, NORMAL_DISPLAY, DEACTIVATE_SCROLL, DISPLAY_ON};
- if (I2C_TRANSMIT_P(display_setup2) != I2C_STATUS_SUCCESS) {
+ static const uint8_t PROGMEM display_setup2[] = {I2C_CMD, COM_PINS, OLED_COM_PINS, CONTRAST, OLED_BRIGHTNESS, PRE_CHARGE_PERIOD, OLED_PRE_CHARGE_PERIOD, VCOM_DETECT, OLED_VCOM_DETECT, DISPLAY_ALL_ON_RESUME, NORMAL_DISPLAY, DEACTIVATE_SCROLL, DISPLAY_ON};
+ if (!oled_send_cmd_P(display_setup2, ARRAY_SIZE(display_setup2))) {
print("display_setup2 failed\n");
return false;
}
@@ -249,30 +389,49 @@ static void calc_bounds(uint8_t update_start, uint8_t *cmd_array) {
// Calculate commands to set memory addressing bounds.
uint8_t start_page = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH;
uint8_t start_column = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH;
-#if (OLED_IC == OLED_IC_SH1106)
+#if !OLED_IC_HAS_HORIZONTAL_MODE
// Commands for Page Addressing Mode. Sets starting page and column; has no end bound.
// Column value must be split into high and low nybble and sent as two commands.
cmd_array[0] = PAM_PAGE_ADDR | start_page;
cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f);
cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f);
- cmd_array[3] = NOP;
- cmd_array[4] = NOP;
- cmd_array[5] = NOP;
#else
// Commands for use in Horizontal Addressing mode.
- cmd_array[1] = start_column;
+ cmd_array[1] = start_column + OLED_COLUMN_OFFSET;
cmd_array[4] = start_page;
cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1];
- cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1;
+ cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1 + cmd_array[4];
#endif
}
static void calc_bounds_90(uint8_t update_start, uint8_t *cmd_array) {
- cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8;
- cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT;
+ // Block numbering starts from the bottom left corner, going up and then to
+ // the right. The controller needs the page and column numbers for the top
+ // left and bottom right corners of that block.
+
+ // Total number of pages across the screen height.
+ const uint8_t height_in_pages = OLED_DISPLAY_HEIGHT / 8;
+
+ // Difference of starting page numbers for adjacent blocks; may be 0 if
+ // blocks are large enough to occupy one or more whole 8px columns.
+ const uint8_t page_inc_per_block = OLED_BLOCK_SIZE % OLED_DISPLAY_HEIGHT / 8;
+
+ // Top page number for a block which is at the bottom edge of the screen.
+ const uint8_t bottom_block_top_page = (height_in_pages - page_inc_per_block) % height_in_pages;
+
+#if !OLED_IC_HAS_HORIZONTAL_MODE
+ // Only the Page Addressing Mode is supported
+ uint8_t start_page = bottom_block_top_page - (OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT / 8);
+ uint8_t start_column = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8;
+ cmd_array[0] = PAM_PAGE_ADDR | start_page;
+ cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f);
+ cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f);
+#else
+ cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8 + OLED_COLUMN_OFFSET;
+ cmd_array[4] = bottom_block_top_page - (OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT / 8);
cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1];
- ;
- cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8;
+ cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8 + cmd_array[4];
+#endif
}
uint8_t crot(uint8_t a, int8_t n) {
@@ -309,7 +468,11 @@ void oled_render(void) {
}
// Set column & page position
+#if OLED_IC_HAS_HORIZONTAL_MODE
static uint8_t display_start[] = {I2C_CMD, COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1, PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1};
+#else
+ static uint8_t display_start[] = {I2C_CMD, PAM_PAGE_ADDR, PAM_SETCOLUMN_LSB, PAM_SETCOLUMN_MSB};
+#endif
if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
calc_bounds(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start
} else {
@@ -317,14 +480,14 @@ void oled_render(void) {
}
// Send column & page position
- if (I2C_TRANSMIT(display_start) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_cmd(display_start, ARRAY_SIZE(display_start))) {
print("oled_render offset command failed\n");
return;
}
if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
// Send render data chunk as is
- if (I2C_WRITE_REG(I2C_DATA, &oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_data(&oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE)) {
print("oled_render data failed\n");
return;
}
@@ -339,11 +502,32 @@ void oled_render(void) {
rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]);
}
+#if OLED_IC_HAS_HORIZONTAL_MODE
// Send render data chunk after rotating
- if (I2C_WRITE_REG(I2C_DATA, &temp_buffer[0], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_data(&temp_buffer[0], OLED_BLOCK_SIZE)) {
print("oled_render90 data failed\n");
return;
}
+#else
+ // For SH1106 or SH1107 the data chunk must be split into separate pieces for each page
+ const uint8_t columns_in_block = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8;
+ const uint8_t num_pages = OLED_BLOCK_SIZE / columns_in_block;
+ for (uint8_t i = 0; i < num_pages; ++i) {
+ // Send column & page position for all pages except the first one
+ if (i > 0) {
+ display_start[1]++;
+ if (!oled_send_cmd(display_start, ARRAY_SIZE(display_start))) {
+ print("oled_render offset command failed\n");
+ return;
+ }
+ }
+ // Send data for the page
+ if (!oled_send_data(&temp_buffer[columns_in_block * i], columns_in_block)) {
+ print("oled_render90 data failed\n");
+ return;
+ }
+ }
+#endif
}
// Clear dirty flag of just rendered block
@@ -568,7 +752,7 @@ bool oled_on(void) {
#endif
if (!oled_active) {
- if (I2C_TRANSMIT_P(display_on) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_cmd_P(display_on, ARRAY_SIZE(display_on))) {
print("oled_on cmd failed\n");
return oled_active;
}
@@ -590,7 +774,7 @@ bool oled_off(void) {
#endif
if (oled_active) {
- if (I2C_TRANSMIT_P(display_off) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_cmd_P(display_off, ARRAY_SIZE(display_off))) {
print("oled_off cmd failed\n");
return oled_active;
}
@@ -610,7 +794,7 @@ uint8_t oled_set_brightness(uint8_t level) {
uint8_t set_contrast[] = {I2C_CMD, CONTRAST, level};
if (oled_brightness != level) {
- if (I2C_TRANSMIT(set_contrast) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_cmd(set_contrast, ARRAY_SIZE(set_contrast))) {
print("set_brightness cmd failed\n");
return oled_brightness;
}
@@ -657,7 +841,7 @@ bool oled_scroll_right(void) {
// This prevents scrolling of bad data from starting the scroll too early after init
if (!oled_dirty && !oled_scrolling) {
uint8_t display_scroll_right[] = {I2C_CMD, SCROLL_RIGHT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL};
- if (I2C_TRANSMIT(display_scroll_right) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_cmd(display_scroll_right, ARRAY_SIZE(display_scroll_right))) {
print("oled_scroll_right cmd failed\n");
return oled_scrolling;
}
@@ -675,7 +859,7 @@ bool oled_scroll_left(void) {
// This prevents scrolling of bad data from starting the scroll too early after init
if (!oled_dirty && !oled_scrolling) {
uint8_t display_scroll_left[] = {I2C_CMD, SCROLL_LEFT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL};
- if (I2C_TRANSMIT(display_scroll_left) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_cmd(display_scroll_left, ARRAY_SIZE(display_scroll_left))) {
print("oled_scroll_left cmd failed\n");
return oled_scrolling;
}
@@ -691,7 +875,7 @@ bool oled_scroll_off(void) {
if (oled_scrolling) {
static const uint8_t PROGMEM display_scroll_off[] = {I2C_CMD, DEACTIVATE_SCROLL};
- if (I2C_TRANSMIT_P(display_scroll_off) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_cmd_P(display_scroll_off, ARRAY_SIZE(display_scroll_off))) {
print("oled_scroll_off cmd failed\n");
return oled_scrolling;
}
@@ -712,14 +896,14 @@ bool oled_invert(bool invert) {
if (invert && !oled_inverted) {
static const uint8_t PROGMEM display_inverted[] = {I2C_CMD, INVERT_DISPLAY};
- if (I2C_TRANSMIT_P(display_inverted) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_cmd_P(display_inverted, ARRAY_SIZE(display_inverted))) {
print("oled_invert cmd failed\n");
return oled_inverted;
}
oled_inverted = true;
} else if (!invert && oled_inverted) {
static const uint8_t PROGMEM display_normal[] = {I2C_CMD, NORMAL_DISPLAY};
- if (I2C_TRANSMIT_P(display_normal) != I2C_STATUS_SUCCESS) {
+ if (!oled_send_cmd_P(display_normal, ARRAY_SIZE(display_normal))) {
print("oled_invert cmd failed\n");
return oled_inverted;
}
diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h
index 291049e36b..627a3da0ba 100644
--- a/drivers/oled/oled_driver.h
+++ b/drivers/oled/oled_driver.h
@@ -22,6 +22,7 @@ along with this program. If not, see .
// an enumeration of the chips this driver supports
#define OLED_IC_SSD1306 0
#define OLED_IC_SH1106 1
+#define OLED_IC_SH1107 2
#if defined(OLED_DISPLAY_CUSTOM)
// Expected user to implement the necessary defines
@@ -68,6 +69,152 @@ along with this program. If not, see .
// If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
// #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 }
// #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 }
+
+#elif defined(OLED_DISPLAY_64X32)
+# ifndef OLED_DISPLAY_WIDTH
+# define OLED_DISPLAY_WIDTH 64
+# endif
+# ifndef OLED_DISPLAY_HEIGHT
+# define OLED_DISPLAY_HEIGHT 32
+# endif
+# ifndef OLED_COLUMN_OFFSET
+# define OLED_COLUMN_OFFSET 32
+# endif
+# ifndef OLED_MATRIX_SIZE
+# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)
+# endif
+# ifndef OLED_BLOCK_TYPE
+# define OLED_BLOCK_TYPE uint8_t
+# endif
+# ifndef OLED_BLOCK_COUNT
+# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 8 (compile time mathed)
+# endif
+# ifndef OLED_BLOCK_SIZE
+# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
+# endif
+# ifndef OLED_COM_PINS
+# define OLED_COM_PINS COM_PINS_ALT
+# endif
+
+# ifndef OLED_SOURCE_MAP
+# define OLED_SOURCE_MAP \
+ { 0, 8, 16, 24 }
+# endif
+# ifndef OLED_TARGET_MAP
+# define OLED_TARGET_MAP \
+ { 24, 16, 8, 0 }
+# endif
+
+#elif defined(OLED_DISPLAY_64X48)
+# ifndef OLED_DISPLAY_WIDTH
+# define OLED_DISPLAY_WIDTH 64
+# endif
+# ifndef OLED_DISPLAY_HEIGHT
+# define OLED_DISPLAY_HEIGHT 48
+# endif
+# ifndef OLED_COLUMN_OFFSET
+# define OLED_COLUMN_OFFSET 32
+# endif
+# ifndef OLED_MATRIX_SIZE
+# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)
+# endif
+# ifndef OLED_BLOCK_TYPE
+# define OLED_BLOCK_TYPE uint32_t
+# endif
+# ifndef OLED_BLOCK_COUNT
+# define OLED_BLOCK_COUNT 24
+# endif
+# ifndef OLED_BLOCK_SIZE
+# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
+# endif
+# ifndef OLED_COM_PINS
+# define OLED_COM_PINS COM_PINS_ALT
+# endif
+
+# ifndef OLED_SOURCE_MAP
+# define OLED_SOURCE_MAP \
+ { 0, 8 }
+# endif
+# ifndef OLED_TARGET_MAP
+# define OLED_TARGET_MAP \
+ { 8, 0 }
+# endif
+
+#elif defined(OLED_DISPLAY_64X128)
+# ifndef OLED_DISPLAY_WIDTH
+# define OLED_DISPLAY_WIDTH 64
+# endif
+# ifndef OLED_DISPLAY_HEIGHT
+# define OLED_DISPLAY_HEIGHT 128
+# endif
+# ifndef OLED_IC
+# define OLED_IC OLED_IC_SH1107
+# endif
+# ifndef OLED_COM_PIN_OFFSET
+# define OLED_COM_PIN_OFFSET 32
+# endif
+# ifndef OLED_MATRIX_SIZE
+# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)
+# endif
+# ifndef OLED_BLOCK_TYPE
+# define OLED_BLOCK_TYPE uint16_t
+# endif
+# ifndef OLED_BLOCK_COUNT
+# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)
+# endif
+# ifndef OLED_BLOCK_SIZE
+# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
+# endif
+# ifndef OLED_COM_PINS
+# define OLED_COM_PINS COM_PINS_ALT
+# endif
+
+# ifndef OLED_SOURCE_MAP
+# define OLED_SOURCE_MAP \
+ { 0, 8, 16, 24, 32, 40, 48, 56 }
+# endif
+# ifndef OLED_TARGET_MAP
+# define OLED_TARGET_MAP \
+ { 56, 48, 40, 32, 24, 16, 8, 0 }
+# endif
+
+#elif defined(OLED_DISPLAY_128X128)
+// Quad height 128x128
+# ifndef OLED_DISPLAY_WIDTH
+# define OLED_DISPLAY_WIDTH 128
+# endif
+# ifndef OLED_DISPLAY_HEIGHT
+# define OLED_DISPLAY_HEIGHT 128
+# endif
+# ifndef OLED_IC
+# define OLED_IC OLED_IC_SH1107
+# endif
+# ifndef OLED_MATRIX_SIZE
+# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 2048 (compile time mathed)
+# endif
+# ifndef OLED_BLOCK_TYPE
+# define OLED_BLOCK_TYPE uint32_t
+# endif
+# ifndef OLED_BLOCK_COUNT
+# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 32 (compile time mathed)
+# endif
+# ifndef OLED_BLOCK_SIZE
+# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 64 (compile time mathed)
+# endif
+# ifndef OLED_COM_PINS
+# define OLED_COM_PINS COM_PINS_ALT
+# endif
+
+// For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
+// The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
+# ifndef OLED_SOURCE_MAP
+# define OLED_SOURCE_MAP \
+ { 0, 8, 16, 24, 32, 40, 48, 56 }
+# endif
+# ifndef OLED_TARGET_MAP
+# define OLED_TARGET_MAP \
+ { 56, 48, 40, 32, 24, 16, 8, 0 }
+# endif
#else // defined(OLED_DISPLAY_128X64)
// Default 128x32
# ifndef OLED_DISPLAY_WIDTH
@@ -191,6 +338,12 @@ typedef enum {
// Returns true if the OLED was initialized successfully
bool oled_init(oled_rotation_t rotation);
+// Send commands and data to screen
+bool oled_send_cmd(const uint8_t *data, uint16_t size);
+bool oled_send_cmd_P(const uint8_t *data, uint16_t size);
+bool oled_send_data(const uint8_t *data, uint16_t size);
+void oled_driver_init(void);
+
// Called at the start of oled_init, weak function overridable by the user
// rotation - the value passed into oled_init
// Return new oled_rotation_t if you want to override default rotation
diff --git a/keyboards/adafruit/macropad/lib/oled_driver_spi.h b/keyboards/adafruit/macropad/lib/oled_driver_spi.h
deleted file mode 100644
index c8a2cd7d9a..0000000000
--- a/keyboards/adafruit/macropad/lib/oled_driver_spi.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* Copyright 2022 Jose Pablo Ramirez
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see .
- */
-#pragma once
-
-#ifndef OLED_DC_PIN
-# error "The OLED driver in SPI needs a D/C pin defined"
-#endif
-#ifndef OLED_CS_PIN
-# error "The OLED driver in SPI needs a CS pin defined"
-#endif
-#ifndef OLED_SPI_MODE
-# define OLED_SPI_MODE 3
-#endif
-#ifndef OLED_SPI_DIVISOR
-# define OLED_SPI_DIVISOR 2
-#endif
diff --git a/keyboards/adafruit/macropad/lib/ssd1306_sh1106.c b/keyboards/adafruit/macropad/lib/ssd1306_sh1106.c
deleted file mode 100644
index 1b05809640..0000000000
--- a/keyboards/adafruit/macropad/lib/ssd1306_sh1106.c
+++ /dev/null
@@ -1,825 +0,0 @@
-/*
-Copyright 2019 Ryan Caltabiano
-Copyright 2022 Jose Pablo Ramirez
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-#include "oled_driver.h"
-#include "oled_driver_spi.h"
-
-#include "spi_master.h"
-
-#include
-#include OLED_FONT_H
-#include "timer.h"
-#include "print.h"
-
-#include
-
-#include "progmem.h"
-
-#include "keyboard.h"
-
-// Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
-// for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf
-
-// Fundamental Commands
-#define CONTRAST 0x81
-#define DISPLAY_ALL_ON 0xA5
-#define DISPLAY_ALL_ON_RESUME 0xA4
-#define NORMAL_DISPLAY 0xA6
-#define INVERT_DISPLAY 0xA7
-#define DISPLAY_ON 0xAF
-#define DISPLAY_OFF 0xAE
-#define NOP 0xE3
-
-// Scrolling Commands
-#define ACTIVATE_SCROLL 0x2F
-#define DEACTIVATE_SCROLL 0x2E
-#define SCROLL_RIGHT 0x26
-#define SCROLL_LEFT 0x27
-#define SCROLL_RIGHT_UP 0x29
-#define SCROLL_LEFT_UP 0x2A
-
-// Addressing Setting Commands
-#define MEMORY_MODE 0x20
-#define COLUMN_ADDR 0x21
-#define PAGE_ADDR 0x22
-#define PAM_SETCOLUMN_LSB 0x00
-#define PAM_SETCOLUMN_MSB 0x10
-#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7
-
-// Hardware Configuration Commands
-#define DISPLAY_START_LINE 0x40
-#define SEGMENT_REMAP 0xA0
-#define SEGMENT_REMAP_INV 0xA1
-#define MULTIPLEX_RATIO 0xA8
-#define COM_SCAN_INC 0xC0
-#define COM_SCAN_DEC 0xC8
-#define DISPLAY_OFFSET 0xD3
-#define COM_PINS 0xDA
-#define COM_PINS_SEQ 0x02
-#define COM_PINS_ALT 0x12
-#define COM_PINS_SEQ_LR 0x22
-#define COM_PINS_ALT_LR 0x32
-
-// Timing & Driving Commands
-#define DISPLAY_CLOCK 0xD5
-#define PRE_CHARGE_PERIOD 0xD9
-#define VCOM_DETECT 0xDB
-
-// Advance Graphic Commands
-#define FADE_BLINK 0x23
-#define ENABLE_FADE 0x20
-#define ENABLE_BLINK 0x30
-
-// Charge Pump Commands
-#define CHARGE_PUMP 0x8D
-
-// Misc defines
-#ifndef OLED_BLOCK_COUNT
-# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)
-#endif
-#ifndef OLED_BLOCK_SIZE
-# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
-#endif
-
-#define OLED_ALL_BLOCKS_MASK (((((OLED_BLOCK_TYPE)1 << (OLED_BLOCK_COUNT - 1)) - 1) << 1) | 1)
-
-// spi defines
-#define OLED_STATUS_SUCCESS SPI_STATUS_SUCCESS
-
-void oled_spi_init(void) {
- spi_init();
-
- setPinOutput(OLED_CS_PIN);
- writePinHigh(OLED_CS_PIN);
-
- setPinOutput(OLED_DC_PIN);
- writePinLow(OLED_DC_PIN);
-}
-
-void oled_spi_start(void) {
- spi_start(OLED_CS_PIN, false, OLED_SPI_MODE, OLED_SPI_DIVISOR);
-}
-
-void oled_spi_stop(void) {
- spi_stop();
-}
-
-// Transmit/Write Funcs.
-bool oled_cmd(const uint8_t *data, uint16_t size) {
- oled_spi_start();
- // Command Mode
- writePinLow(OLED_DC_PIN);
- // Send the commands
- if(spi_transmit(data, size) != OLED_STATUS_SUCCESS){
- oled_spi_stop();
- return false;
- }
- oled_spi_stop();
- return true;
-}
-
-bool oled_cmd_p(const uint8_t *data, uint16_t size) {
- return oled_cmd(data, size);
-}
-
-bool oled_write_reg(const uint8_t *data, uint16_t size)
-{
- oled_spi_start();
- // Command Mode
- writePinHigh(OLED_DC_PIN);
- // Send the commands
- if(spi_transmit(data, size) != OLED_STATUS_SUCCESS){
- oled_spi_stop();
- return false;
- }
- oled_spi_stop();
- return true;
-}
-
-#define HAS_FLAGS(bits, flags) ((bits & flags) == flags)
-
-// Display buffer's is the same as the OLED memory layout
-// this is so we don't end up with rounding errors with
-// parts of the display unusable or don't get cleared correctly
-// and also allows for drawing & inverting
-uint8_t oled_buffer[OLED_MATRIX_SIZE];
-uint8_t * oled_cursor;
-OLED_BLOCK_TYPE oled_dirty = 0;
-bool oled_initialized = false;
-bool oled_active = false;
-bool oled_scrolling = false;
-bool oled_inverted = false;
-uint8_t oled_brightness = OLED_BRIGHTNESS;
-oled_rotation_t oled_rotation = 0;
-uint8_t oled_rotation_width = 0;
-uint8_t oled_scroll_speed = 0; // this holds the speed after being remapped to ssd1306 internal values
-uint8_t oled_scroll_start = 0;
-uint8_t oled_scroll_end = 7;
-#if OLED_TIMEOUT > 0
-uint32_t oled_timeout;
-#endif
-#if OLED_SCROLL_TIMEOUT > 0
-uint32_t oled_scroll_timeout;
-#endif
-#if OLED_UPDATE_INTERVAL > 0
-uint16_t oled_update_timeout;
-#endif
-
-// Flips the rendering bits for a character at the current cursor position
-static void InvertCharacter(uint8_t *cursor) {
- const uint8_t *end = cursor + OLED_FONT_WIDTH;
- while (cursor < end) {
- *cursor = ~(*cursor);
- cursor++;
- }
-}
-
-bool oled_init(oled_rotation_t rotation) {
- oled_rotation = oled_init_user(oled_init_kb(rotation));
- if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
- oled_rotation_width = OLED_DISPLAY_WIDTH;
- } else {
- oled_rotation_width = OLED_DISPLAY_HEIGHT;
- }
-
- oled_spi_init();
-
-#ifdef OLED_RST_PIN
- /* Reset device */
- setPinOutput(OLED_RST_PIN);
- writePinLow(OLED_RST_PIN);
- wait_ms(20);
- writePinHigh(OLED_RST_PIN);
- wait_ms(20);
-#endif
-
- static const uint8_t PROGMEM display_setup1[] = {
- DISPLAY_OFF,
- DISPLAY_CLOCK,
- 0x80,
- MULTIPLEX_RATIO,
- OLED_DISPLAY_HEIGHT - 1,
- DISPLAY_OFFSET,
- 0x00,
- DISPLAY_START_LINE | 0x00,
- CHARGE_PUMP,
- 0x14,
-#if (OLED_IC != OLED_IC_SH1106)
- // MEMORY_MODE is unsupported on SH1106 (Page Addressing only)
- MEMORY_MODE,
- 0x00, // Horizontal addressing mode
-#endif
- };
-
- if (!oled_cmd_p(display_setup1, ARRAY_SIZE(display_setup1))) {
- print("oled_init cmd set 1 failed\n");
- return false;
- }
-
- if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) {
- static const uint8_t PROGMEM display_normal[] = {SEGMENT_REMAP_INV, COM_SCAN_DEC};
- if (!oled_cmd_p(display_normal, ARRAY_SIZE(display_normal))) {
- print("oled_init cmd normal rotation failed\n");
- return false;
- }
- } else {
- static const uint8_t PROGMEM display_flipped[] = {SEGMENT_REMAP, COM_SCAN_INC};
- if (!oled_cmd_p(display_flipped, ARRAY_SIZE(display_flipped))) {
- print("display_flipped failed\n");
- return false;
- }
- }
-
- static const uint8_t PROGMEM display_setup2[] = {COM_PINS, OLED_COM_PINS, CONTRAST, OLED_BRIGHTNESS, PRE_CHARGE_PERIOD, 0xF1, VCOM_DETECT, 0x20, DISPLAY_ALL_ON_RESUME, NORMAL_DISPLAY, DEACTIVATE_SCROLL, DISPLAY_ON};
- if (!oled_cmd_p(display_setup2, ARRAY_SIZE(display_setup2))) {
- print("display_setup2 failed\n");
- return false;
- }
-
-#if OLED_TIMEOUT > 0
- oled_timeout = timer_read32() + OLED_TIMEOUT;
-#endif
-#if OLED_SCROLL_TIMEOUT > 0
- oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT;
-#endif
-
- oled_clear();
- oled_initialized = true;
- oled_active = true;
- oled_scrolling = false;
- return true;
-}
-
-__attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
- return rotation;
-}
-__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) {
- return rotation;
-}
-
-void oled_clear(void) {
- memset(oled_buffer, 0, sizeof(oled_buffer));
- oled_cursor = &oled_buffer[0];
- oled_dirty = OLED_ALL_BLOCKS_MASK;
-}
-
-static void calc_bounds(uint8_t update_start, uint8_t *cmd_array) {
- // Calculate commands to set memory addressing bounds.
- uint8_t start_page = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH;
- uint8_t start_column = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH;
-#if (OLED_IC == OLED_IC_SH1106)
- // Commands for Page Addressing Mode. Sets starting page and column; has no end bound.
- // Column value must be split into high and low nybble and sent as two commands.
- cmd_array[0] = PAM_PAGE_ADDR | start_page;
- cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f);
- cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f);
- cmd_array[3] = NOP;
- cmd_array[4] = NOP;
- cmd_array[5] = NOP;
-#else
- // Commands for use in Horizontal Addressing mode.
- cmd_array[1] = start_column;
- cmd_array[4] = start_page;
- cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1];
- cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1;
-#endif
-}
-
-static void calc_bounds_90(uint8_t update_start, uint8_t *cmd_array) {
- cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8;
- cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT;
- cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1];
- ;
- cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8;
-}
-
-uint8_t crot(uint8_t a, int8_t n) {
- const uint8_t mask = 0x7;
- n &= mask;
- return a << n | a >> (-n & mask);
-}
-
-static void rotate_90(const uint8_t *src, uint8_t *dest) {
- for (uint8_t i = 0, shift = 7; i < 8; ++i, --shift) {
- uint8_t selector = (1 << i);
- for (uint8_t j = 0; j < 8; ++j) {
- dest[i] |= crot(src[j] & selector, shift - (int8_t)j);
- }
- }
-}
-
-void oled_render(void) {
- if (!oled_initialized) {
- return;
- }
-
- // Do we have work to do?
- oled_dirty &= OLED_ALL_BLOCKS_MASK;
- if (!oled_dirty || oled_scrolling) {
- return;
- }
-
- // Find first dirty block
- uint8_t update_start = 0;
- while (!(oled_dirty & ((OLED_BLOCK_TYPE)1 << update_start))) {
- ++update_start;
- }
-
- // Set column & page position
- static uint8_t display_start[] = {COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1, PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1};
- if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
- calc_bounds(update_start, display_start);
- } else {
- calc_bounds_90(update_start, display_start);
- }
-
- // Send column & page position
- if (!oled_cmd(display_start, ARRAY_SIZE(display_start))) {
- print("oled_render offset command failed\n");
- return;
- }
-
- if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
- // Send render data chunk as is
- if (!oled_write_reg(&oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE)) {
- print("oled_render data failed\n");
- return;
- }
- } else {
- // Rotate the render chunks
- const static uint8_t source_map[] = OLED_SOURCE_MAP;
- const static uint8_t target_map[] = OLED_TARGET_MAP;
-
- static uint8_t temp_buffer[OLED_BLOCK_SIZE];
- memset(temp_buffer, 0, sizeof(temp_buffer));
- for (uint8_t i = 0; i < sizeof(source_map); ++i) {
- rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]);
- }
-
- // Send render data chunk after rotating
- if (!oled_write_reg(temp_buffer, OLED_BLOCK_SIZE)) {
- print("oled_render90 data failed\n");
- return;
- }
- }
-
- // Turn on display if it is off
- oled_on();
-
- // Clear dirty flag
- oled_dirty &= ~((OLED_BLOCK_TYPE)1 << update_start);
-}
-
-void oled_set_cursor(uint8_t col, uint8_t line) {
- uint16_t index = line * oled_rotation_width + col * OLED_FONT_WIDTH;
-
- // Out of bounds?
- if (index >= OLED_MATRIX_SIZE) {
- index = 0;
- }
-
- oled_cursor = &oled_buffer[index];
-}
-
-void oled_advance_page(bool clearPageRemainder) {
- uint16_t index = oled_cursor - &oled_buffer[0];
- uint8_t remaining = oled_rotation_width - (index % oled_rotation_width);
-
- if (clearPageRemainder) {
- // Remaining Char count
- remaining = remaining / OLED_FONT_WIDTH;
-
- // Write empty character until next line
- while (remaining--)
- oled_write_char(' ', false);
- } else {
- // Next page index out of bounds?
- if (index + remaining >= OLED_MATRIX_SIZE) {
- index = 0;
- remaining = 0;
- }
-
- oled_cursor = &oled_buffer[index + remaining];
- }
-}
-
-void oled_advance_char(void) {
- uint16_t nextIndex = oled_cursor - &oled_buffer[0] + OLED_FONT_WIDTH;
- uint8_t remainingSpace = oled_rotation_width - (nextIndex % oled_rotation_width);
-
- // Do we have enough space on the current line for the next character
- if (remainingSpace < OLED_FONT_WIDTH) {
- nextIndex += remainingSpace;
- }
-
- // Did we go out of bounds
- if (nextIndex >= OLED_MATRIX_SIZE) {
- nextIndex = 0;
- }
-
- // Update cursor position
- oled_cursor = &oled_buffer[nextIndex];
-}
-
-// Main handler that writes character data to the display buffer
-void oled_write_char(const char data, bool invert) {
- // Advance to the next line if newline
- if (data == '\n') {
- // Old source wrote ' ' until end of line...
- oled_advance_page(true);
- return;
- }
-
- if (data == '\r') {
- oled_advance_page(false);
- return;
- }
-
- // copy the current render buffer to check for dirty after
- static uint8_t oled_temp_buffer[OLED_FONT_WIDTH];
- memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH);
-
- _Static_assert(sizeof(font) >= ((OLED_FONT_END + 1 - OLED_FONT_START) * OLED_FONT_WIDTH), "OLED_FONT_END references outside array");
-
- // set the reder buffer data
- uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index
- if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) {
- memset(oled_cursor, 0x00, OLED_FONT_WIDTH);
- } else {
- const uint8_t *glyph = &font[(cast_data - OLED_FONT_START) * OLED_FONT_WIDTH];
- memcpy_P(oled_cursor, glyph, OLED_FONT_WIDTH);
- }
-
- // Invert if needed
- if (invert) {
- InvertCharacter(oled_cursor);
- }
-
- // Dirty check
- if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) {
- uint16_t index = oled_cursor - &oled_buffer[0];
- oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
- // Edgecase check if the written data spans the 2 chunks
- oled_dirty |= ((OLED_BLOCK_TYPE)1 << ((index + OLED_FONT_WIDTH - 1) / OLED_BLOCK_SIZE));
- }
-
- // Finally move to the next char
- oled_advance_char();
-}
-
-void oled_write(const char *data, bool invert) {
- const char *end = data + strlen(data);
- while (data < end) {
- oled_write_char(*data, invert);
- data++;
- }
-}
-
-void oled_write_ln(const char *data, bool invert) {
- oled_write(data, invert);
- oled_advance_page(true);
-}
-
-void oled_pan(bool left) {
- uint16_t i = 0;
- for (uint16_t y = 0; y < OLED_DISPLAY_HEIGHT / 8; y++) {
- if (left) {
- for (uint16_t x = 0; x < OLED_DISPLAY_WIDTH - 1; x++) {
- i = y * OLED_DISPLAY_WIDTH + x;
- oled_buffer[i] = oled_buffer[i + 1];
- }
- } else {
- for (uint16_t x = OLED_DISPLAY_WIDTH - 1; x > 0; x--) {
- i = y * OLED_DISPLAY_WIDTH + x;
- oled_buffer[i] = oled_buffer[i - 1];
- }
- }
- }
- oled_dirty = OLED_ALL_BLOCKS_MASK;
-}
-
-oled_buffer_reader_t oled_read_raw(uint16_t start_index) {
- if (start_index > OLED_MATRIX_SIZE) start_index = OLED_MATRIX_SIZE;
- oled_buffer_reader_t ret_reader;
- ret_reader.current_element = &oled_buffer[start_index];
- ret_reader.remaining_element_count = OLED_MATRIX_SIZE - start_index;
- return ret_reader;
-}
-
-void oled_write_raw_byte(const char data, uint16_t index) {
- if (index > OLED_MATRIX_SIZE) index = OLED_MATRIX_SIZE;
- if (oled_buffer[index] == data) return;
- oled_buffer[index] = data;
- oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
-}
-
-void oled_write_raw(const char *data, uint16_t size) {
- uint16_t cursor_start_index = oled_cursor - &oled_buffer[0];
- if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index;
- for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) {
- uint8_t c = *data++;
- if (oled_buffer[i] == c) continue;
- oled_buffer[i] = c;
- oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
- }
-}
-
-void oled_write_pixel(uint8_t x, uint8_t y, bool on) {
- if (x >= oled_rotation_width) {
- return;
- }
- uint16_t index = x + (y / 8) * oled_rotation_width;
- if (index >= OLED_MATRIX_SIZE) {
- return;
- }
- uint8_t data = oled_buffer[index];
- if (on) {
- data |= (1 << (y % 8));
- } else {
- data &= ~(1 << (y % 8));
- }
- if (oled_buffer[index] != data) {
- oled_buffer[index] = data;
- oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
- }
-}
-
-#if defined(__AVR__)
-void oled_write_P(const char *data, bool invert) {
- uint8_t c = pgm_read_byte(data);
- while (c != 0) {
- oled_write_char(c, invert);
- c = pgm_read_byte(++data);
- }
-}
-
-void oled_write_ln_P(const char *data, bool invert) {
- oled_write_P(data, invert);
- oled_advance_page(true);
-}
-
-void oled_write_raw_P(const char *data, uint16_t size) {
- uint16_t cursor_start_index = oled_cursor - &oled_buffer[0];
- if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index;
- for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) {
- uint8_t c = pgm_read_byte(data++);
- if (oled_buffer[i] == c) continue;
- oled_buffer[i] = c;
- oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
- }
-}
-#endif // defined(__AVR__)
-
-bool oled_on(void) {
- if (!oled_initialized) {
- return oled_active;
- }
-
-#if OLED_TIMEOUT > 0
- oled_timeout = timer_read32() + OLED_TIMEOUT;
-#endif
-
- static const uint8_t PROGMEM display_on[] =
-#ifdef OLED_FADE_OUT
- {FADE_BLINK, 0x00};
-#else
- {DISPLAY_ON};
-#endif
-
- if (!oled_active) {
- if (!oled_cmd_p(display_on, ARRAY_SIZE(display_on))) {
- print("oled_on cmd failed\n");
- return oled_active;
- }
- oled_active = true;
- }
- return oled_active;
-}
-
-bool oled_off(void) {
- if (!oled_initialized) {
- return !oled_active;
- }
-
- static const uint8_t PROGMEM display_off[] =
-#ifdef OLED_FADE_OUT
- {FADE_BLINK, ENABLE_FADE | OLED_FADE_OUT_INTERVAL};
-#else
- {DISPLAY_OFF};
-#endif
-
- if (oled_active) {
- if (!oled_cmd_p(display_off, ARRAY_SIZE(display_off))) {
- print("oled_off cmd failed\n");
- return oled_active;
- }
- oled_active = false;
- }
- return !oled_active;
-}
-
-bool is_oled_on(void) {
- return oled_active;
-}
-
-uint8_t oled_set_brightness(uint8_t level) {
- if (!oled_initialized) {
- return oled_brightness;
- }
-
- uint8_t set_contrast[] = { CONTRAST, level};
- if (oled_brightness != level) {
- if (!oled_cmd(set_contrast, ARRAY_SIZE(set_contrast))) {
- print("set_brightness cmd failed\n");
- return oled_brightness;
- }
- oled_brightness = level;
- }
- return oled_brightness;
-}
-
-uint8_t oled_get_brightness(void) {
- return oled_brightness;
-}
-
-// Set the specific 8 lines rows of the screen to scroll.
-// 0 is the default for start, and 7 for end, which is the entire
-// height of the screen. For 128x32 screens, rows 4-7 are not used.
-void oled_scroll_set_area(uint8_t start_line, uint8_t end_line) {
- oled_scroll_start = start_line;
- oled_scroll_end = end_line;
-}
-
-void oled_scroll_set_speed(uint8_t speed) {
- // Sets the speed for scrolling... does not take effect
- // until scrolling is either started or restarted
- // the ssd1306 supports 8 speeds
- // FrameRate2 speed = 7
- // FrameRate3 speed = 4
- // FrameRate4 speed = 5
- // FrameRate5 speed = 0
- // FrameRate25 speed = 6
- // FrameRate64 speed = 1
- // FrameRate128 speed = 2
- // FrameRate256 speed = 3
- // for ease of use these are remaped here to be in order
- static const uint8_t scroll_remap[8] = {7, 4, 5, 0, 6, 1, 2, 3};
- oled_scroll_speed = scroll_remap[speed];
-}
-
-bool oled_scroll_right(void) {
- if (!oled_initialized) {
- return oled_scrolling;
- }
-
- // Dont enable scrolling if we need to update the display
- // This prevents scrolling of bad data from starting the scroll too early after init
- if (!oled_dirty && !oled_scrolling) {
- uint8_t display_scroll_right[] = {SCROLL_RIGHT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL};
- if (!oled_cmd(display_scroll_right, ARRAY_SIZE(display_scroll_right))) {
- print("oled_scroll_right cmd failed\n");
- return oled_scrolling;
- }
- oled_scrolling = true;
- }
- return oled_scrolling;
-}
-
-bool oled_scroll_left(void) {
- if (!oled_initialized) {
- return oled_scrolling;
- }
-
- // Dont enable scrolling if we need to update the display
- // This prevents scrolling of bad data from starting the scroll too early after init
- if (!oled_dirty && !oled_scrolling) {
- uint8_t display_scroll_left[] = {SCROLL_LEFT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL};
- if (!oled_cmd(display_scroll_left, ARRAY_SIZE(display_scroll_left))) {
- print("oled_scroll_left cmd failed\n");
- return oled_scrolling;
- }
- oled_scrolling = true;
- }
- return oled_scrolling;
-}
-
-bool oled_scroll_off(void) {
- if (!oled_initialized) {
- return !oled_scrolling;
- }
-
- if (oled_scrolling) {
- static const uint8_t PROGMEM display_scroll_off[] = {DEACTIVATE_SCROLL};
- if (!oled_cmd_p(display_scroll_off, ARRAY_SIZE(display_scroll_off))) {
- print("oled_scroll_off cmd failed\n");
- return oled_scrolling;
- }
- oled_scrolling = false;
- oled_dirty = OLED_ALL_BLOCKS_MASK;
- }
- return !oled_scrolling;
-}
-
-bool is_oled_scrolling(void) {
- return oled_scrolling;
-}
-
-bool oled_invert(bool invert) {
- if (!oled_initialized) {
- return oled_inverted;
- }
-
- if (invert && !oled_inverted) {
- static const uint8_t PROGMEM display_inverted[] = {INVERT_DISPLAY};
- if (!oled_cmd_p(display_inverted, ARRAY_SIZE(display_inverted))) {
- print("oled_invert cmd failed\n");
- return oled_inverted;
- }
- oled_inverted = true;
- } else if (!invert && oled_inverted) {
- static const uint8_t PROGMEM display_normal[] = {NORMAL_DISPLAY};
- if (!oled_cmd_p(display_normal, ARRAY_SIZE(display_normal))) {
- print("oled_invert cmd failed\n");
- return oled_inverted;
- }
- oled_inverted = false;
- }
-
- return oled_inverted;
-}
-
-uint8_t oled_max_chars(void) {
- if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
- return OLED_DISPLAY_WIDTH / OLED_FONT_WIDTH;
- }
- return OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH;
-}
-
-uint8_t oled_max_lines(void) {
- if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
- return OLED_DISPLAY_HEIGHT / OLED_FONT_HEIGHT;
- }
- return OLED_DISPLAY_WIDTH / OLED_FONT_HEIGHT;
-}
-
-void oled_task(void) {
- if (!oled_initialized) {
- return;
- }
-
-#if OLED_UPDATE_INTERVAL > 0
- if (timer_elapsed(oled_update_timeout) >= OLED_UPDATE_INTERVAL) {
- oled_update_timeout = timer_read();
- oled_set_cursor(0, 0);
- oled_task_kb();
- }
-#else
- oled_set_cursor(0, 0);
- oled_task_kb();
-#endif
-
-#if OLED_SCROLL_TIMEOUT > 0
- if (oled_dirty && oled_scrolling) {
- oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT;
- oled_scroll_off();
- }
-#endif
-
- // Smart render system, no need to check for dirty
- oled_render();
-
- // Display timeout check
-#if OLED_TIMEOUT > 0
- if (oled_active && timer_expired32(timer_read32(), oled_timeout)) {
- oled_off();
- }
-#endif
-
-#if OLED_SCROLL_TIMEOUT > 0
- if (!oled_scrolling && timer_expired32(timer_read32(), oled_scroll_timeout)) {
-# ifdef OLED_SCROLL_TIMEOUT_RIGHT
- oled_scroll_right();
-# else
- oled_scroll_left();
-# endif
- }
-#endif
-}
-
-__attribute__((weak)) bool oled_task_kb(void) {
- return oled_task_user();
-}
-__attribute__((weak)) bool oled_task_user(void) {
- return true;
-}
diff --git a/keyboards/adafruit/macropad/rules.mk b/keyboards/adafruit/macropad/rules.mk
index 23b15d77fc..a84e29da3d 100644
--- a/keyboards/adafruit/macropad/rules.mk
+++ b/keyboards/adafruit/macropad/rules.mk
@@ -14,7 +14,4 @@ AUDIO_DRIVER = pwm_hardware
ENCODER_ENABLE = yes
RGB_MATRIX_ENABLE = yes
OLED_ENABLE = yes
-OLED_DRIVER = custom
-# Project specific files
-SRC += lib/ssd1306_sh1106.c
-QUANTUM_LIB_SRC += spi_master.c
+OLED_TRANSPORT = spi