From e508b5e04eaac5f56698333bdd2a9c2ffa89ab75 Mon Sep 17 00:00:00 2001 From: = <=> Date: Sun, 2 Apr 2017 18:27:24 +0900 Subject: [PATCH 01/28] Adds tong92's keymap to tv44 --- keyboards/tv44/keymaps/tong92/Makefile | 21 ++++ keyboards/tv44/keymaps/tong92/config.h | 12 +++ keyboards/tv44/keymaps/tong92/keymap.c | 138 ++++++++++++++++++++++++ keyboards/tv44/keymaps/tong92/readme.md | 52 +++++++++ 4 files changed, 223 insertions(+) create mode 100644 keyboards/tv44/keymaps/tong92/Makefile create mode 100644 keyboards/tv44/keymaps/tong92/config.h create mode 100644 keyboards/tv44/keymaps/tong92/keymap.c create mode 100644 keyboards/tv44/keymaps/tong92/readme.md diff --git a/keyboards/tv44/keymaps/tong92/Makefile b/keyboards/tv44/keymaps/tong92/Makefile new file mode 100644 index 0000000000..e60e3c5c5a --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/tv44/keymaps/tong92/config.h b/keyboards/tv44/keymaps/tong92/config.h new file mode 100644 index 0000000000..be959a823c --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/config.h @@ -0,0 +1,12 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here +#ifdef BACKLIGHT_ENABLE + #define BACKLIGHT_PIN B2 + #define BACKLIGHT_LEVELS 7 +#endif + +#endif diff --git a/keyboards/tv44/keymaps/tong92/keymap.c b/keyboards/tv44/keymaps/tong92/keymap.c new file mode 100644 index 0000000000..4a16b3554f --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/keymap.c @@ -0,0 +1,138 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. +//Author: tong92 + +#include "tv44.h" +#include "action_layer.h" +#include "eeconfig.h" +#ifdef BACKLIGHT_ENABLE + #include "backlight.h" +#endif + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define LOWER F(1) +#define RAISE F(2) +#define FTN MO(4) +#define MOUSE M(10) +#define GO_DEFT M(99) +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,--------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | Enter| + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | Shift | Z | X | C | V | B | N | M | , | . | / |Shift| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | Ftn1 | GUI | Alt | Space/LOWER | Space/RAISE | ' | [ | ] | Alt | + * `--------------------------------------------------------------------------' + */ +[0] = { +{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, +{KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_ENT}, +{KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH,KC_RSFT }, +{FTN ,KC_LGUI,KC_LALT,LOWER,XXXXXXX,XXXXXXX,XXXXXXX,RAISE,KC_QUOT,KC_LBRC,KC_RBRC,KC_RALT} +}, +/* LOWER + * ,--------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | - | + | [ | ] | \ | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | | | | | END | LEFT| Down|RIGHT| + * `--------------------------------------------------------------------------' + */ +[1] = { +{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______}, +{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS }, +{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN }, +{XXXXXXX,_______,_______,_______,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT} +}, +/* RAISE + * ,--------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | | | | | END | LEFT| Down|RIGHT| + * `--------------------------------------------------------------------------' + */ +[2] ={ +{KC_TILD,KC_EXLM,KC_AT, KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,_______ }, +{_______,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS,KC_EQL, KC_LCBR,KC_RCBR,KC_PIPE }, +{_______,KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_HOME,KC_PGUP,KC_UP ,KC_PGDN }, +{XXXXXXX,_______,_______,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,_______,KC_END, KC_LEFT,KC_DOWN,KC_RIGHT} +}, +/* FTN + * ,--------------------------------------------------------------------------. + * | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DELET | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | Ctrl| + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | DeskL | DeskR| Task Manager| DeskX | MOUSE| | | LED | + * `--------------------------------------------------------------------------' + */ +[4] = { +{KC_ESC ,LALT(KC_F4) ,LGUI(KC_UP) ,XXXXXXX ,XXXXXXX ,S(KC_CAPS) ,XXXXXXX,KC_PGUP,KC_UP,KC_PGDN,KC_PSCR,KC_DELT}, +{_______,LGUI(KC_LEFT) ,LGUI(KC_DOWN) ,LGUI(KC_RIGHT) ,XXXXXXX ,LALT(KC_CAPS),KC_CAPS,KC_LEFT,KC_DOWN,KC_RIGHT,XXXXXXX,XXXXXXX}, +{_______,LGUI(LSFT(KC_LEFT)),LGUI(LSFT(KC_RIGHT)),XXXXXXX ,XXXXXXX ,LCTL(KC_CAPS),KC_SLCK,KC_HOME,XXXXXXX,KC_END,XXXXXXX,KC_RCTL}, +{_______,LGUI(LCTL(KC_LEFT)),LGUI(LCTL(KC_RIGHT)),LCTL(LALT(KC_DELT)),XXXXXXX,XXXXXXX,XXXXXXX,LGUI(LCTL(KC_F4)),MOUSE,XXXXXXX,XXXXXXX,M(0)} +}, +/* MOUSE + * ,--------------------------------------------------------------------------. + * | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| | RESET | + * |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + * | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | | + * |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + * | | | | | | | |M_AC0|M_AC1|M_AC2| | | + * |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + * | | | | GO_DEFAULT | GO_DEFAULT | | | | | + * `--------------------------------------------------------------------------' + */ +[10] ={ +{XXXXXXX,XXXXXXX,XXXXXXX,KC_MS_U,XXXXXXX,XXXXXXX,XXXXXXX,KC_WH_L,KC_WH_U,KC_WH_R,XXXXXXX,RESET}, +{XXXXXXX,XXXXXXX,KC_MS_L,KC_MS_D,KC_MS_R,XXXXXXX,XXXXXXX,KC_BTN1,KC_WH_D,KC_BTN2,XXXXXXX,XXXXXXX}, +{XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_ACL0,KC_ACL1,KC_ACL2,XXXXXXX,XXXXXXX}, +{XXXXXXX,XXXXXXX,XXXXXXX,GO_DEFT,XXXXXXX,XXXXXXX,XXXXXXX,GO_DEFT,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX} +} +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_KEY(1, KC_SPC), + [2] = ACTION_LAYER_TAP_KEY(2, KC_SPC) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + if (record->event.pressed) { + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } + break; + case 10: + if (record->event.pressed) { + layer_on(10); + } + break; + case 99: + if (record->event.pressed) { + layer_off(10); + layer_off(4); + } + break; + } + return MACRO_NONE; +}; \ No newline at end of file diff --git a/keyboards/tv44/keymaps/tong92/readme.md b/keyboards/tv44/keymaps/tong92/readme.md new file mode 100644 index 0000000000..8208572568 --- /dev/null +++ b/keyboards/tv44/keymaps/tong92/readme.md @@ -0,0 +1,52 @@ +# The tong92's keymap for tv44 + +- Arrow Layout (45key) +- my keymap for Window User +- Mouse Layer : space -> Default Layer + +## Qwerty + ,--------------------------------------------------------------------------. + | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | Ctrl | A | S | D | F | G | H | J | K | L | ; | Enter| + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | Shift | Z | X | C | V | B | N | M | , | . | / |Shift| + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | Ftn1 | GUI | Alt | Space/LOWER | Space/RAISE | ' | [ | ] | Alt | + `--------------------------------------------------------------------------' + + +## RAISE + ,--------------------------------------------------------------------------. + | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | | F1 | F2 | F3 | F4 | F5 | F6 | _ | = | { | } | | | + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | | F7 | F8 | F9 | F10 | F11 | F12 | | HOME| PgUp| UP | PgDo| + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | | | | | | END | LEFT| Down|RIGHT| + `--------------------------------------------------------------------------' + + +## FTN + ,--------------------------------------------------------------------------. + | ESC |WinOf|WinUp| | |Sh+Ca| | PgUp| UP | PgDo|PrtSc| DELET | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | |WinLe|WinDo|WinRi| |Al+Ca|CapsL| LEFT| DOWN|RIGHT| | | + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | |WinLW|WinRW| | |Ct+Ca|ScroL| HOME| | END | | Ctrl| + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | | DeskL | DeskR| Task Manager| DeskX | MOUSE| | | LED | + `--------------------------------------------------------------------------' + + +## MOUSE + ,--------------------------------------------------------------------------. + | | | |Mo_Up| | | |M_WhL|M_WhU|M_WhR| | RESET | + |------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-------| + | | |Mo_Le|Mo_Do|Mo_Ri| | |M_Bt1|M_WhD|M_Bt2| | | + |-------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`------| + | | | | | | | |M_AC0|M_AC1|M_AC2| | | + |--------`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----`-----| + | | | | GO_DEFAULT | GO_DEFAULT | | | | | + `--------------------------------------------------------------------------' From f8ed4ed573c798bd40a1063072fd619732a2d49a Mon Sep 17 00:00:00 2001 From: Nurahmadie Date: Tue, 21 Feb 2017 09:39:51 +0700 Subject: [PATCH 02/28] Initial work for my kbod support in qmk_firmware - Wiring layout done No actual keymap yet --- keyboards/handwired/kbod/Makefile | 3 + keyboards/handwired/kbod/config.h | 162 ++++++++++++++++++ keyboards/handwired/kbod/kbod.c | 28 +++ keyboards/handwired/kbod/kbod.h | 25 +++ .../handwired/kbod/keymaps/default/Makefile | 21 +++ .../handwired/kbod/keymaps/default/config.h | 8 + .../handwired/kbod/keymaps/default/keymap.c | 44 +++++ .../handwired/kbod/keymaps/default/readme.md | 1 + keyboards/handwired/kbod/readme.md | 28 +++ keyboards/handwired/kbod/rules.mk | 68 ++++++++ 10 files changed, 388 insertions(+) create mode 100644 keyboards/handwired/kbod/Makefile create mode 100644 keyboards/handwired/kbod/config.h create mode 100644 keyboards/handwired/kbod/kbod.c create mode 100644 keyboards/handwired/kbod/kbod.h create mode 100644 keyboards/handwired/kbod/keymaps/default/Makefile create mode 100644 keyboards/handwired/kbod/keymaps/default/config.h create mode 100644 keyboards/handwired/kbod/keymaps/default/keymap.c create mode 100644 keyboards/handwired/kbod/keymaps/default/readme.md create mode 100644 keyboards/handwired/kbod/readme.md create mode 100644 keyboards/handwired/kbod/rules.mk diff --git a/keyboards/handwired/kbod/Makefile b/keyboards/handwired/kbod/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/handwired/kbod/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h new file mode 100644 index 0000000000..e73b7d0865 --- /dev/null +++ b/keyboards/handwired/kbod/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER fudanchii +#define PRODUCT kbod +#define DESCRIPTION Keyboard of Disapproval + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7, D6 } +#define MATRIX_COL_PINS { D0, D1, F0, F1, F4, F5, F6, F7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/kbod/kbod.c b/keyboards/handwired/kbod/kbod.c new file mode 100644 index 0000000000..9a12cae0d2 --- /dev/null +++ b/keyboards/handwired/kbod/kbod.c @@ -0,0 +1,28 @@ +#include "kbod.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/handwired/kbod/kbod.h b/keyboards/handwired/kbod/kbod.h new file mode 100644 index 0000000000..629fb3eac8 --- /dev/null +++ b/keyboards/handwired/kbod/kbod.h @@ -0,0 +1,25 @@ +#ifndef KBOD_H +#define KBOD_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, K2C, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, \ + k40, k41, k42, k43, k44, k45, k46, k47 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, { k08, k09, k0A, k0B, k0C, k0D, KC_NO, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16, k17 }, { k18, k19, k1A, k1B, k1C, k1D, KC_NO, k3B }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, { k28, k29, k2A, k2B, k2C, k38, k39, k3A }, \ + { k30, k31, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47 }, \ +} + +#endif diff --git a/keyboards/handwired/kbod/keymaps/default/Makefile b/keyboards/handwired/kbod/keymaps/default/Makefile new file mode 100644 index 0000000000..0d9def930c --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/config.h b/keyboards/handwired/kbod/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c new file mode 100644 index 0000000000..9245270eb3 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +#include "kbod.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( /* Base */ + KC_A, KC_1, KC_H, \ + KC_TAB, KC_SPC \ +), +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} \ No newline at end of file diff --git a/keyboards/handwired/kbod/keymaps/default/readme.md b/keyboards/handwired/kbod/keymaps/default/readme.md new file mode 100644 index 0000000000..3fe84c6194 --- /dev/null +++ b/keyboards/handwired/kbod/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for kbod \ No newline at end of file diff --git a/keyboards/handwired/kbod/readme.md b/keyboards/handwired/kbod/readme.md new file mode 100644 index 0000000000..179ab1d792 --- /dev/null +++ b/keyboards/handwired/kbod/readme.md @@ -0,0 +1,28 @@ +kbod keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/kbod folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|] +``` + +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk new file mode 100644 index 0000000000..4fcd147a9a --- /dev/null +++ b/keyboards/handwired/kbod/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 +FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches From 8b206e1e75f487a473b8a58223c857363ce0a6e4 Mon Sep 17 00:00:00 2001 From: Nurahmadie Date: Wed, 22 Feb 2017 06:40:48 +0700 Subject: [PATCH 03/28] Add initial keymap *crossfingers* --- keyboards/handwired/kbod/kbod.h | 4 - .../handwired/kbod/keymaps/default/keymap.c | 105 +++++++++++++----- 2 files changed, 77 insertions(+), 32 deletions(-) diff --git a/keyboards/handwired/kbod/kbod.h b/keyboards/handwired/kbod/kbod.h index 629fb3eac8..04ecdd3921 100644 --- a/keyboards/handwired/kbod/kbod.h +++ b/keyboards/handwired/kbod/kbod.h @@ -3,10 +3,6 @@ #include "quantum.h" -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array #define KEYMAP( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c index 9245270eb3..137ddf3878 100644 --- a/keyboards/handwired/kbod/keymaps/default/keymap.c +++ b/keyboards/handwired/kbod/keymaps/default/keymap.c @@ -1,44 +1,93 @@ #include "kbod.h" +#define _____ KC_TRNS + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = KEYMAP( /* Base */ - KC_A, KC_1, KC_H, \ - KC_TAB, KC_SPC \ -), + KEYMAP( /* Base */ + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQUAL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOT, KC_ENTER, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSPO, + LT(1, KC_LEAD), KC_LCTL, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ), + KEYMAP( /* Cursor layer */ + KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT, + _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, KC_END, _____, + _____, _____, _____, _____, _____, _____, _____, _____, KC_PGUP, KC_PGDN, KC_UP, _____, + _____, _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT, _____ + ), + KEYMAP( /* Multimedia layer */ + _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_UP, _____, + LT(3, KC_LEAD), _____, _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3 + ), + KEYMAP( /* Multimedia layer */ + _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_WH_UP, _____, + _____, _____, _____, _____, _____, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3 + ), }; const uint16_t PROGMEM fn_actions[] = { - + [0] = ACTION_FUNCTION(0), }; +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case 0: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} + + +LEADER_EXTERNS(); + +void matrix_scan_user(void) { + LEADER_DICTIONARY() { + leading = false; + leader_end(); + + SEQ_ONE_KEY(KC_B) { + layer_switch(0); + } + SEQ_ONE_KEY(KC_C) { + layer_switch(1); + } + SEQ_ONE_KEY(KC_M) { + layer_switch(2); + } + } +} + const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - // MACRODOWN only works in this function - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - } return MACRO_NONE; }; - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - void led_set_user(uint8_t usb_led) { } \ No newline at end of file From 7614c6b7a75c93b248d36f039f919ab925afde32 Mon Sep 17 00:00:00 2001 From: Nurahmadie Date: Fri, 24 Feb 2017 12:06:10 +0700 Subject: [PATCH 04/28] Remove lead keys, fix some typos, rearrange layers --- keyboards/handwired/kbod/kbod.h | 2 +- .../handwired/kbod/keymaps/default/keymap.c | 37 +++++-------------- 2 files changed, 10 insertions(+), 29 deletions(-) diff --git a/keyboards/handwired/kbod/kbod.h b/keyboards/handwired/kbod/kbod.h index 04ecdd3921..3560636242 100644 --- a/keyboards/handwired/kbod/kbod.h +++ b/keyboards/handwired/kbod/kbod.h @@ -6,7 +6,7 @@ #define KEYMAP( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, K2C, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, \ k40, k41, k42, k43, k44, k45, k46, k47 \ ) \ diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c index 137ddf3878..463b1fc8be 100644 --- a/keyboards/handwired/kbod/keymaps/default/keymap.c +++ b/keyboards/handwired/kbod/keymaps/default/keymap.c @@ -7,29 +7,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQUAL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOT, KC_ENTER, - KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSPO, - LT(1, KC_LEAD), KC_LCTL, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSPC, + MO(1), KC_LCTL, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_APP, KC_RCTL ), KEYMAP( /* Cursor layer */ KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT, - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, KC_END, _____, + TO(3), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT, + TO(2), _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, KC_END, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PGUP, KC_PGDN, KC_UP, _____, - _____, _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT, _____ + _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT, _____ ), KEYMAP( /* Multimedia layer */ _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_UP, _____, - LT(3, KC_LEAD), _____, _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3 + TO(0), _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3 ), KEYMAP( /* Multimedia layer */ _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_WH_UP, _____, - _____, _____, _____, _____, _____, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3 + TO(0), _____, _____, _____, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3 ), }; @@ -37,6 +37,7 @@ const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_FUNCTION(0), }; +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { static uint8_t shift_esc_shift_mask; switch (id) { @@ -63,31 +64,11 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { } } - -LEADER_EXTERNS(); - -void matrix_scan_user(void) { - LEADER_DICTIONARY() { - leading = false; - leader_end(); - - SEQ_ONE_KEY(KC_B) { - layer_switch(0); - } - SEQ_ONE_KEY(KC_C) { - layer_switch(1); - } - SEQ_ONE_KEY(KC_M) { - layer_switch(2); - } - } -} - const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { return MACRO_NONE; }; void led_set_user(uint8_t usb_led) { - + } \ No newline at end of file From af7430b896bdc15dd007b2227ed0b6f2feb0634a Mon Sep 17 00:00:00 2001 From: Nurahmadie Date: Sat, 25 Feb 2017 12:36:53 +0700 Subject: [PATCH 05/28] Add capslock led, and audio buttons - Also change layer switch to momentary --- .../handwired/kbod/keymaps/default/keymap.c | 42 ++++++++++++------- 1 file changed, 26 insertions(+), 16 deletions(-) diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c index 463b1fc8be..3514ffb98a 100644 --- a/keyboards/handwired/kbod/keymaps/default/keymap.c +++ b/keyboards/handwired/kbod/keymaps/default/keymap.c @@ -2,34 +2,36 @@ #define _____ KC_TRNS +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KEYMAP( /* Base */ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQUAL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOT, KC_ENTER, - KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSPC, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSFT, MO(1), KC_LCTL, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_APP, KC_RCTL ), KEYMAP( /* Cursor layer */ KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - TO(3), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT, - TO(2), _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, KC_END, _____, - _____, _____, _____, _____, _____, _____, _____, _____, KC_PGUP, KC_PGDN, KC_UP, _____, - _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT, _____ + MO(3), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT, + MO(2), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, _____, + _____, _____, _____, _____, _____, _____, _____, _____, KC_PGUP, KC_PGDN, KC_END, KC_UP, + _____, _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT ), KEYMAP( /* Multimedia layer */ - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + TO(0), _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, _____, + _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PSCR, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, - _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_UP, _____, - TO(0), _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3 + _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, + _____, _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3 ), KEYMAP( /* Multimedia layer */ - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + TO(0), _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, _____, + _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PSCR, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, - _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_WH_UP, _____, - TO(0), _____, _____, _____, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3 + _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_WH_UP, KC_MS_BTN2, + _____, _____, _____, _____, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3 ), }; @@ -37,7 +39,7 @@ const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_FUNCTION(0), }; -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { static uint8_t shift_esc_shift_mask; switch (id) { @@ -66,9 +68,17 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - return MACRO_NONE; + return MACRO_NONE; }; void led_set_user(uint8_t usb_led) { - + if (usb_led & _BV(USB_LED_CAPS_LOCK)) { + PORTB |= _BV(PB0); + } else { + PORTB &= ~_BV(PB0); + } +} + +void matrix_init_user(void) { + DDRB |= _BV(PB0); } \ No newline at end of file From c9dd11d5abec11aa046031c12b1aa5edc5efae77 Mon Sep 17 00:00:00 2001 From: Nurahmadie Date: Sat, 25 Feb 2017 13:30:18 +0700 Subject: [PATCH 06/28] Enable alt-F4 without [Fn] - Add led indicator when keymap not on base layer \o/ --- .../handwired/kbod/keymaps/default/keymap.c | 62 ++++++++++++------- 1 file changed, 41 insertions(+), 21 deletions(-) diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c index 3514ffb98a..6f2805d9dc 100644 --- a/keyboards/handwired/kbod/keymaps/default/keymap.c +++ b/keyboards/handwired/kbod/keymaps/default/keymap.c @@ -2,11 +2,31 @@ #define _____ KC_TRNS -#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) +#define MODS_PRESSED(btn) (get_mods() & (MOD_BIT(KC_L##btn)|MOD_BIT(KC_R##btn))) + +#define SET_WHETHER(mask, btn1, btn2) \ +if (record->event.pressed) { \ + if (mask) { \ + add_key(btn2); \ + send_keyboard_report(); \ + } else { \ + add_key(btn1); \ + send_keyboard_report(); \ + } \ +} else { \ + if (mask) { \ + del_key(btn2); \ + send_keyboard_report(); \ + } else { \ + del_key(btn1); \ + send_keyboard_report(); \ + } \ +} \ + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KEYMAP( /* Base */ - F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQUAL, KC_BSPC, + F(0), KC_1, KC_2, KC_3, F(1), KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQUAL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOT, KC_ENTER, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSFT, @@ -37,31 +57,21 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_FUNCTION(0), + [1] = ACTION_FUNCTION(1), }; void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { - static uint8_t shift_esc_shift_mask; + static uint8_t shift_esc_mask; + static uint8_t alt_mask; switch (id) { case 0: - shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; - if (record->event.pressed) { - if (shift_esc_shift_mask) { - add_key(KC_GRV); - send_keyboard_report(); - } else { - add_key(KC_ESC); - send_keyboard_report(); - } - } else { - if (shift_esc_shift_mask) { - del_key(KC_GRV); - send_keyboard_report(); - } else { - del_key(KC_ESC); - send_keyboard_report(); - } - } + shift_esc_mask = MODS_PRESSED(SHIFT); + SET_WHETHER(shift_esc_mask, KC_ESC, KC_GRAVE) + break; + case 1: + alt_mask = MODS_PRESSED(ALT); + SET_WHETHER(alt_mask, KC_4, KC_F4); break; } } @@ -81,4 +91,14 @@ void led_set_user(uint8_t usb_led) { void matrix_init_user(void) { DDRB |= _BV(PB0); + DDRC |= _BV(PC7); +} + +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + if (layer) { + PORTC |= _BV(PC7); + } else { + PORTC &= ~_BV(PC7); + } } \ No newline at end of file From 10105f645a7fdcf0d636e0eb2c768754521602a3 Mon Sep 17 00:00:00 2001 From: Nurahmadie Date: Sun, 26 Feb 2017 11:41:03 +0700 Subject: [PATCH 07/28] Add README --- .../handwired/kbod/keymaps/default/readme.md | 6 ++++- keyboards/handwired/kbod/readme.md | 25 ++++++------------- 2 files changed, 13 insertions(+), 18 deletions(-) diff --git a/keyboards/handwired/kbod/keymaps/default/readme.md b/keyboards/handwired/kbod/keymaps/default/readme.md index 3fe84c6194..35c22ec007 100644 --- a/keyboards/handwired/kbod/keymaps/default/readme.md +++ b/keyboards/handwired/kbod/keymaps/default/readme.md @@ -1 +1,5 @@ -# The default keymap for kbod \ No newline at end of file +# The default keymap for kbod + +This is the default keymap for kbod, + +it consists of a base layer with QWERTY layout, a momentary cursor-layer, and mouse-keys and multimedia layers. \ No newline at end of file diff --git a/keyboards/handwired/kbod/readme.md b/keyboards/handwired/kbod/readme.md index 179ab1d792..bd58fdd384 100644 --- a/keyboards/handwired/kbod/readme.md +++ b/keyboards/handwired/kbod/readme.md @@ -1,28 +1,19 @@ -kbod keyboard firmware +KBOD keyboard firmware ====================== +KBOD is a 60% Keyboard kit, hand-wired, with Arduino Micro as its controller. It's utilize 8x8 matrix and has layout similar to GH-60 + ## Quantum MK Firmware For the full Quantum feature list, see [the parent readme](/). ## Building -Download or clone the whole firmware and navigate to the keyboards/kbod folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. +Download or clone the whole firmware and use ```make handwired-kbod-default``` to generate the .hex file. You may flash it with avrdude -Depending on which keymap you would like to use, you will have to compile slightly differently. - -### Default - -To build with the default keymap, simply run `make default`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with a keymap like this: +## Flashing +Something along this line: ``` -$ make [default|jack|] -``` - -Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. +avrdude -p m32u4 -c avr109 -P -C -e -u flash:w:handwired_kbod_default.hex +``` \ No newline at end of file From f5d78c739d48bad32409b3819c8d624d5e78c017 Mon Sep 17 00:00:00 2001 From: Nurahmadie Date: Sun, 26 Feb 2017 11:44:21 +0700 Subject: [PATCH 08/28] Forgot semicolon, and add reference link --- keyboards/handwired/kbod/keymaps/default/keymap.c | 2 +- keyboards/handwired/kbod/readme.md | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c index 6f2805d9dc..a6c09dd530 100644 --- a/keyboards/handwired/kbod/keymaps/default/keymap.c +++ b/keyboards/handwired/kbod/keymaps/default/keymap.c @@ -67,7 +67,7 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { switch (id) { case 0: shift_esc_mask = MODS_PRESSED(SHIFT); - SET_WHETHER(shift_esc_mask, KC_ESC, KC_GRAVE) + SET_WHETHER(shift_esc_mask, KC_ESC, KC_GRAVE); break; case 1: alt_mask = MODS_PRESSED(ALT); diff --git a/keyboards/handwired/kbod/readme.md b/keyboards/handwired/kbod/readme.md index bd58fdd384..67bf711bee 100644 --- a/keyboards/handwired/kbod/readme.md +++ b/keyboards/handwired/kbod/readme.md @@ -16,4 +16,6 @@ Something along this line: ``` avrdude -p m32u4 -c avr109 -P -C -e -u flash:w:handwired_kbod_default.hex -``` \ No newline at end of file +``` + +[More info](https://github.com/fudanchii/keyboard_of_disapproval) \ No newline at end of file From 15ddaa7f1929aa301a325b03c57e267524d56ea8 Mon Sep 17 00:00:00 2001 From: Nurahmadie Date: Sat, 11 Mar 2017 20:52:52 +0700 Subject: [PATCH 09/28] Fix layer stuck, and add numpad support --- keyboards/handwired/kbod/config.h | 5 +++++ .../handwired/kbod/keymaps/default/keymap.c | 20 +++++++++---------- 2 files changed, 15 insertions(+), 10 deletions(-) diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h index e73b7d0865..f3d0c8bf2d 100644 --- a/keyboards/handwired/kbod/config.h +++ b/keyboards/handwired/kbod/config.h @@ -159,4 +159,9 @@ along with this program. If not, see . //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION +#define PREVENT_STUCK_MODIFIERS + +#undef TAPPING_TOGGLE +#define TAPPING_TOGGLE 2 + #endif diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c index a6c09dd530..65c5f552c8 100644 --- a/keyboards/handwired/kbod/keymaps/default/keymap.c +++ b/keyboards/handwired/kbod/keymaps/default/keymap.c @@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOT, KC_ENTER, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSFT, - MO(1), KC_LCTL, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + TT(1), KC_LCTL, KC_LALT, KC_SPACE, KC_RALT, KC_RGUI, KC_APP, KC_RCTL ), KEYMAP( /* Cursor layer */ KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, @@ -39,19 +39,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _____, _____, _____, _____, _____, _____, _____, _____, KC_PGUP, KC_PGDN, KC_END, KC_UP, _____, _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT ), - KEYMAP( /* Multimedia layer */ - TO(0), _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, _____, - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PSCR, - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, - _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, + KEYMAP( /* Keypad layer */ + TO(0), _____, _____, _____, _____, _____, _____, KC_P7, KC_P8, KC_P9, _____, KC_PMNS, KC_PPLS, _____, + _____, _____, _____, _____, _____, _____, _____, KC_P4, KC_P5, KC_P6, _____, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, KC_P1, KC_P2, KC_P3, _____, _____, _____, + _____, _____, _____, _____, _____, _____, _____, KC_P0, _____, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, _____, _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3 ), KEYMAP( /* Multimedia layer */ TO(0), _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP, _____, - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PSCR, - _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, - _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_WH_UP, KC_MS_BTN2, - _____, _____, _____, _____, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3 + _____, _____, KC_WAKE, _____, _____, _____, _____, _____, _____, _____, KC_MSTP, KC_MPRV, KC_MNXT, _____, + _____, _____, KC_SLEP, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, + _____, _____, KC_PWR, _____, _____, _____, _____, _____, _____, KC_MS_BTN1, KC_MS_WH_UP, KC_MS_BTN2, + _____, _____, _____, KC_MPLY, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, KC_MS_BTN3 ), }; From 649d08742a7aec4001193bb5a7a35ca7935a9753 Mon Sep 17 00:00:00 2001 From: Nurahmadie Date: Tue, 28 Mar 2017 16:17:10 +0700 Subject: [PATCH 10/28] Use tap-toggle to move between layers. - Add PDOT key --- keyboards/handwired/kbod/keymaps/default/keymap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/keyboards/handwired/kbod/keymaps/default/keymap.c b/keyboards/handwired/kbod/keymaps/default/keymap.c index 65c5f552c8..1386b742f5 100644 --- a/keyboards/handwired/kbod/keymaps/default/keymap.c +++ b/keyboards/handwired/kbod/keymaps/default/keymap.c @@ -34,16 +34,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), KEYMAP( /* Cursor layer */ KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - MO(3), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT, - MO(2), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, _____, + TT(3), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_INSERT, + TT(2), _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_HOME, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_PGUP, KC_PGDN, KC_END, KC_UP, _____, _____, _____, _____, _____, KC_LEFT, KC_DOWN, KC_RIGHT ), KEYMAP( /* Keypad layer */ - TO(0), _____, _____, _____, _____, _____, _____, KC_P7, KC_P8, KC_P9, _____, KC_PMNS, KC_PPLS, _____, + TO(0), KC_1, KC_2, KC_3, F(1), KC_5, KC_6, KC_P7, KC_P8, KC_P9, KC_P0, KC_PMNS, KC_PPLS, KC_BSPC, _____, _____, _____, _____, _____, _____, _____, KC_P4, KC_P5, KC_P6, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, KC_P1, KC_P2, KC_P3, _____, _____, _____, - _____, _____, _____, _____, _____, _____, _____, KC_P0, _____, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, + _____, _____, _____, _____, _____, _____, _____, KC_P0, KC_PDOT, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, _____, _____, _____, _____, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN3 ), KEYMAP( /* Multimedia layer */ From 9e72b7e7e97f9ae92c7eb1de66aa03cad047baf6 Mon Sep 17 00:00:00 2001 From: dbroqua Date: Sun, 2 Apr 2017 23:25:26 +0200 Subject: [PATCH 11/28] - Added MX HHKB like for gh60 with 7u space bar --- keyboards/gh60/keymaps/dbroqua_7U/Makefile | 111 +++++++++++++++++++++ keyboards/gh60/keymaps/dbroqua_7U/keymap.c | 88 ++++++++++++++++ 2 files changed, 199 insertions(+) create mode 100644 keyboards/gh60/keymaps/dbroqua_7U/Makefile create mode 100644 keyboards/gh60/keymaps/dbroqua_7U/keymap.c diff --git a/keyboards/gh60/keymaps/dbroqua_7U/Makefile b/keyboards/gh60/keymaps/dbroqua_7U/Makefile new file mode 100644 index 0000000000..da0f07d7d0 --- /dev/null +++ b/keyboards/gh60/keymaps/dbroqua_7U/Makefile @@ -0,0 +1,111 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality +# MIDI_ENABLE ?= YES # MIDI controls +# UNICODE_ENABLE ?= YES # Unicode +# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable RGB Underglow + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/gh60/keymaps/dbroqua_7U/keymap.c b/keyboards/gh60/keymaps/dbroqua_7U/keymap.c new file mode 100644 index 0000000000..bebfe5af5d --- /dev/null +++ b/keyboards/gh60/keymaps/dbroqua_7U/keymap.c @@ -0,0 +1,88 @@ +#include "gh60.h" +#include "action_layer.h" + +#define _DEFAULT 0 +#define _FN 1 + +int esc_led = 0; + +// Fillers to make layering more clear +#define ______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty gui/alt/space/alt/gui + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | + * |-----------------------------------------------------------------------------------------+ + * |LGUI | LAlt | Space | RAlt |RGUI | + * `-----------------------------------------------------------------' + */ + [_DEFAULT] = KEYMAP_HHKB( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), \ + ______, KC_LGUI, KC_LALT, KC_SPC, ______, KC_RALT, KC_RGUI, ______ \ + ), + +/* FN Layer + * ,-----------------------------------------------------------------------------------------. + * | Led | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------+ + * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | | + * |-----------------------------------------------------------------------------------------+ + * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | + * |-----------------------------------------------------------------------------------------+ + * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | + * |-----------------------------------------------------------------------------------------+ + * | | | | Stop | | + * `-----------------------------------------------------------------' + */ + [_FN] = KEYMAP_HHKB( /* Layer 1 */ + F(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ + ______, KC_VOLD, KC_VOLU, KC_MUTE, ______, ______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,______, \ + ______, KC_MPRV, KC_MPLY, KC_MNXT, ______, ______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, ______, ______, \ + ______, ______, ______, ______, ______, KC_MSTP, ______, ______ \ + ) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + return MACRO_NONE; +}; + +enum function_id { + LED_TOGGLE +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(LED_TOGGLE) +}; + +void esc_led_toggle(void) { + if (esc_led == 0){ + esc_led = 1; + gh60_esc_led_on(); + } else { + esc_led = 0; + gh60_esc_led_off(); + } +} + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + switch (id) { + case LED_TOGGLE: + if (record->event.pressed) { + esc_led_toggle(); + } + break; + } +} \ No newline at end of file From 570b4605b2bdc7e2c9b83ab4991d4582148efb12 Mon Sep 17 00:00:00 2001 From: Alexander Schaefer Date: Sun, 2 Apr 2017 18:44:15 -0600 Subject: [PATCH 12/28] Update readme.md There's no readme specifically for the Ergodox EZ now, so link to the Ergodox readme. --- readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/readme.md b/readme.md index b2dfc5f759..f7bf14b6ab 100644 --- a/readme.md +++ b/readme.md @@ -32,7 +32,7 @@ The OLKB product firmwares are maintained by [Jack Humbert](https://github.com/j This is not a tiny project. While this is the main readme, there are many other files you might want to consult. Here are some points of interest: * [**The Wiki**](https://github.com/qmk/qmk_firmware/wiki) - the entirety of the readme has been moved here -* The readme for your own keyboard: This is found under `keyboards//`. So for the ErgoDox EZ, it's [here](keyboards/ergodox/ez/); for the Planck, it's [here](keyboards/planck/) and so on. +* The readme for your own keyboard: This is found under `keyboards//`. So for the ErgoDox, it's [here](keyboards/ergodox/); for the Planck, it's [here](keyboards/planck/) and so on. * The list of possible keycodes you can use in your keymap is actually spread out in a few different places: * [doc/keycode.txt](doc/keycode.txt) - an explanation of those same keycodes. * [quantum/quantum_keycodes.h](quantum/quantum_keycodes.h) - this is where the QMK-specific aliases are all set up. Things like the Hyper and Meh key, the Leader key, and all of the other QMK innovations. These are also explained and documented below, but `quantum_keycodes.h` is where they're actually defined. From 344ebbac43ef510b29cdcdff2688186ee3ffead7 Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Mon, 3 Apr 2017 11:32:54 -0400 Subject: [PATCH 13/28] Revert removal of avrdude make option --- keyboards/lets_split/rules.mk | 14 +++++++++++++- keyboards/lets_split/split_util.c | 2 +- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index ff159e0f06..79860ea35d 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -1,7 +1,7 @@ SRC += matrix.c \ i2c.c \ split_util.c \ - serial.c\ + serial.c \ ssd1306.c # MCU name @@ -74,3 +74,15 @@ USE_I2C ?= yes SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/lets_split/split_util.c b/keyboards/lets_split/split_util.c index 46586fbc00..39639c3b4b 100644 --- a/keyboards/lets_split/split_util.c +++ b/keyboards/lets_split/split_util.c @@ -21,7 +21,7 @@ static void setup_handedness(void) { #ifdef EE_HANDS isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); #else - // I2c_MASTER_RIGHT ish deprecate use MASTER_RIGHT instead since this works for both serial and i2c: + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) isLeftHand = !has_usb(); #else From 48f4c5997bd0e041379f592f3e1e0c306e5a5e4d Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Mon, 3 Apr 2017 12:06:28 -0400 Subject: [PATCH 14/28] Move defines for RGB to after the config.h include --- keyboards/lets_split/keymaps/hexwire/config.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/keyboards/lets_split/keymaps/hexwire/config.h b/keyboards/lets_split/keymaps/hexwire/config.h index 9c8c6d7f40..e5a779f633 100644 --- a/keyboards/lets_split/keymaps/hexwire/config.h +++ b/keyboards/lets_split/keymaps/hexwire/config.h @@ -20,13 +20,6 @@ along with this program. If not, see . #define TAPPING_TERM 150 -#undef RGBLED_NUM -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - #ifdef SUBPROJECT_rev1 #include "../../rev1/config.h" #define COMPACT_KEYMAP( \ @@ -68,3 +61,10 @@ along with this program. If not, see . #ifdef SUBPROJECT_rev2fliphalf #include "../../rev2fliphalf/config.h" #endif + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 From de52bd5d8970a9b195d85c5367d4ecd125458976 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Mon, 3 Apr 2017 12:42:58 -0400 Subject: [PATCH 15/28] quick fix for space cadet shift --- quantum/quantum.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/quantum/quantum.c b/quantum/quantum.c index 62d9ef9232..4f4cee4e9b 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -135,7 +135,7 @@ void reset_keyboard(void) { #endif static bool shift_interrupted[2] = {0, 0}; -static uint16_t scs_timer = 0; +static uint16_t scs_timer[2] = {0, 0}; bool process_record_quantum(keyrecord_t *record) { @@ -395,7 +395,7 @@ bool process_record_quantum(keyrecord_t *record) { case KC_LSPO: { if (record->event.pressed) { shift_interrupted[0] = false; - scs_timer = timer_read (); + scs_timer[0] = timer_read (); register_mods(MOD_BIT(KC_LSFT)); } else { @@ -405,7 +405,7 @@ bool process_record_quantum(keyrecord_t *record) { shift_interrupted[1] = true; } #endif - if (!shift_interrupted[0] && timer_elapsed(scs_timer) < TAPPING_TERM) { + if (!shift_interrupted[0] && timer_elapsed(scs_timer[0]) < TAPPING_TERM) { register_code(LSPO_KEY); unregister_code(LSPO_KEY); } @@ -418,7 +418,7 @@ bool process_record_quantum(keyrecord_t *record) { case KC_RSPC: { if (record->event.pressed) { shift_interrupted[1] = false; - scs_timer = timer_read (); + scs_timer[1] = timer_read (); register_mods(MOD_BIT(KC_RSFT)); } else { @@ -428,7 +428,7 @@ bool process_record_quantum(keyrecord_t *record) { shift_interrupted[1] = true; } #endif - if (!shift_interrupted[1] && timer_elapsed(scs_timer) < TAPPING_TERM) { + if (!shift_interrupted[1] && timer_elapsed(scs_timer[1]) < TAPPING_TERM) { register_code(RSPC_KEY); unregister_code(RSPC_KEY); } From 4e51c1e3ca75c9abe45673866d026cc0f810a410 Mon Sep 17 00:00:00 2001 From: ishtob Date: Mon, 3 Apr 2017 13:17:41 -0400 Subject: [PATCH 16/28] Update ssd1306.c --- keyboards/lets_split/ssd1306.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/keyboards/lets_split/ssd1306.c b/keyboards/lets_split/ssd1306.c index 3c7816bb32..4bf3a87437 100644 --- a/keyboards/lets_split/ssd1306.c +++ b/keyboards/lets_split/ssd1306.c @@ -1,3 +1,4 @@ +#ifdef SSD1306OLED #include "config.h" #include "i2c.h" #include @@ -466,3 +467,4 @@ void iota_gfx_task(void) { iota_gfx_off(); } } +#endif From d0cfaba6d2f4ddf6aee7f05408971a0d4712bd60 Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Mon, 3 Apr 2017 12:15:14 -0400 Subject: [PATCH 17/28] Revise KEYMAP macro to make left and right halves more clear --- keyboards/lets_split/rev1/rev1.h | 24 +++++----- keyboards/lets_split/rev2/rev2.h | 80 ++++++++++++++++---------------- 2 files changed, 52 insertions(+), 52 deletions(-) diff --git a/keyboards/lets_split/rev1/rev1.h b/keyboards/lets_split/rev1/rev1.h index 4667c9fb09..6bf9f0f038 100644 --- a/keyboards/lets_split/rev1/rev1.h +++ b/keyboards/lets_split/rev1/rev1.h @@ -9,20 +9,20 @@ //void promicro_bootloader_jmp(bool program); #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 }, \ - { k40, k41, k42, k43, k44, k45 }, \ - { k50, k51, k52, k53, k54, k55 }, \ - { k60, k61, k62, k63, k64, k65 }, \ - { k70, k71, k72, k73, k74, k75 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 } \ } #endif \ No newline at end of file diff --git a/keyboards/lets_split/rev2/rev2.h b/keyboards/lets_split/rev2/rev2.h index 054731366e..0603827e08 100644 --- a/keyboards/lets_split/rev2/rev2.h +++ b/keyboards/lets_split/rev2/rev2.h @@ -10,62 +10,62 @@ #ifdef USE_I2C #include #ifdef __AVR__ -#include -#include + #include + #include #endif #ifdef SSD1306OLED -extern bool iota_gfx_init(void); -extern void iota_gfx_task(void); -extern bool iota_gfx_off(void); -extern bool iota_gfx_on(void); -extern void iota_gfx_flush(void); -extern void iota_gfx_write_char(uint8_t c); -extern void iota_gfx_write(const char *data); -extern void iota_gfx_write_P(const char *data); -extern void iota_gfx_clear_screen(void); + extern bool iota_gfx_init(void); + extern void iota_gfx_task(void); + extern bool iota_gfx_off(void); + extern bool iota_gfx_on(void); + extern void iota_gfx_flush(void); + extern void iota_gfx_write_char(uint8_t c); + extern void iota_gfx_write(const char *data); + extern void iota_gfx_write_P(const char *data); + extern void iota_gfx_clear_screen(void); #endif #endif //void promicro_bootloader_jmp(bool program); #ifndef FLIP_HALF -//Standard Keymap +// Standard Keymap +// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left) #define KEYMAP( \ - k40, k41, k42, k43, k44, k45, k05, k04, k03, k02, k01, k00, \ - k50, k51, k52, k53, k54, k55, k15, k14, k13, k12, k11, k10, \ - k60, k61, k62, k63, k64, k65, k25, k24, k23, k22, k21, k20, \ - k70, k71, k72, k73, k74, k75, k35, k34, k33, k32, k31, k30 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k45, k44, k43, k42, k41, k40 }, \ - { k55, k54, k53, k52, k51, k50 }, \ - { k65, k64, k63, k62, k61, k60 }, \ - { k75, k74, k73, k72, k71, k70 }, \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { R35, R34, R33, R32, R31, R30 } \ } - #else -// Keymap with one side flipped +// Keymap with right side flipped +// (TRRS jack on both halves are to the right) #define KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ ) \ { \ - { k00, k01, k02, k03, k04, k05 }, \ - { k10, k11, k12, k13, k14, k15 }, \ - { k20, k21, k22, k23, k24, k25 }, \ - { k30, k31, k32, k33, k34, k35 }, \ - { k45, k44, k43, k42, k41, k40 }, \ - { k55, k54, k53, k52, k51, k50 }, \ - { k65, k64, k63, k62, k61, k60 }, \ - { k75, k74, k73, k72, k71, k70 } \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { R30, R31, R32, R33, R34, R35 } \ } #endif - -#endif \ No newline at end of file +#endif From 563961328be1605a7f3942f042572a0160ac2959 Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Mon, 3 Apr 2017 12:31:38 -0400 Subject: [PATCH 18/28] Rename COMPACT_KEYMAP to KC_KEYMAP and move to lets_split.h --- keyboards/lets_split/keymaps/hexwire/config.h | 36 +------------------ keyboards/lets_split/keymaps/hexwire/keymap.c | 12 +++---- keyboards/lets_split/lets_split.h | 14 ++++++++ 3 files changed, 21 insertions(+), 41 deletions(-) diff --git a/keyboards/lets_split/keymaps/hexwire/config.h b/keyboards/lets_split/keymaps/hexwire/config.h index e5a779f633..27c24fe4be 100644 --- a/keyboards/lets_split/keymaps/hexwire/config.h +++ b/keyboards/lets_split/keymaps/hexwire/config.h @@ -19,47 +19,13 @@ along with this program. If not, see . #define USE_SERIAL #define TAPPING_TERM 150 +#define FLIP_HALF #ifdef SUBPROJECT_rev1 #include "../../rev1/config.h" - #define COMPACT_KEYMAP( \ - k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ - k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ - k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ - k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ - ) \ - { \ - { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \ - { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \ - { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \ - { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \ - { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \ - { KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \ - { KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \ - { KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \ - } #endif #ifdef SUBPROJECT_rev2 #include "../../rev2/config.h" - #define COMPACT_KEYMAP( \ - k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \ - k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \ - k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \ - k30, k31, k32, k33, k34, k35, k75, k74, k73, k72, k71, k70 \ - ) \ - { \ - { KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05 }, \ - { KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15 }, \ - { KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25 }, \ - { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35 }, \ - { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45 }, \ - { KC_##k50, KC_##k51, KC_##k52, KC_##k53, KC_##k54, KC_##k55 }, \ - { KC_##k60, KC_##k61, KC_##k62, KC_##k63, KC_##k64, KC_##k65 }, \ - { KC_##k70, KC_##k71, KC_##k72, KC_##k73, KC_##k74, KC_##k75 } \ - } -#endif -#ifdef SUBPROJECT_rev2fliphalf - #include "../../rev2fliphalf/config.h" #endif #undef RGBLED_NUM diff --git a/keyboards/lets_split/keymaps/hexwire/keymap.c b/keyboards/lets_split/keymaps/hexwire/keymap.c index f8370490d6..fcf3cde758 100644 --- a/keyboards/lets_split/keymaps/hexwire/keymap.c +++ b/keyboards/lets_split/keymaps/hexwire/keymap.c @@ -39,7 +39,7 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = COMPACT_KEYMAP( + [_QWERTY] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -51,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_COLEMAK] = COMPACT_KEYMAP( + [_COLEMAK] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -63,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_DVORAK] = COMPACT_KEYMAP( + [_DVORAK] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS, //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_LOWER] = COMPACT_KEYMAP( + [_LOWER] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -87,7 +87,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_RAISE] = COMPACT_KEYMAP( + [_RAISE] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, , //|----+----+----+----+----+----| |----+----+----+----+----+----| @@ -99,7 +99,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //`----+----+----+----+----+----' `----+----+----+----+----+----' ), - [_FN3] = COMPACT_KEYMAP( + [_FN3] = KC_KEYMAP( //,----+----+----+----+----+----. ,----+----+----+----+----+----. F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 , //|----+----+----+----+----+----| |----+----+----+----+----+----| diff --git a/keyboards/lets_split/lets_split.h b/keyboards/lets_split/lets_split.h index 0de308c7a9..1892bf2cbd 100644 --- a/keyboards/lets_split/lets_split.h +++ b/keyboards/lets_split/lets_split.h @@ -11,6 +11,20 @@ #include "rev2fliphalf.h" #endif +// Used to create a keymap using only KC_ prefixed keys +#define KC_KEYMAP( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ + ) \ + KEYMAP( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ + ) + #include "quantum.h" #endif \ No newline at end of file From d90ac762958eb77222a5277d64474f2aa3349176 Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Mon, 3 Apr 2017 12:51:31 -0400 Subject: [PATCH 19/28] Move defines for RGB to after the config.h include --- .../lets_split/keymaps/OLED_sample/config.h | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/keyboards/lets_split/keymaps/OLED_sample/config.h b/keyboards/lets_split/keymaps/OLED_sample/config.h index 353ea368c6..8389ba111d 100644 --- a/keyboards/lets_split/keymaps/OLED_sample/config.h +++ b/keyboards/lets_split/keymaps/OLED_sample/config.h @@ -27,19 +27,16 @@ along with this program. If not, see . #define TAPPING_FORCE_HOLD #define TAPPING_TERM 100 +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif + #undef RGBLED_NUM #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 6 #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 #define RGBLIGHT_VAL_STEP 17 - - - - -#ifdef SUBPROJECT_rev1 - #include "../../rev1/config.h" -#endif -#ifdef SUBPROJECT_rev2 - #include "../../rev2/config.h" -#endif \ No newline at end of file From e3aeab356afd52299bf6cf05b5c99995ce167275 Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Mon, 3 Apr 2017 13:04:34 -0400 Subject: [PATCH 20/28] Move SSD1306 function declarations to header file --- .../lets_split/keymaps/OLED_sample/keymap.c | 3 +++ keyboards/lets_split/rev2/rev2.c | 1 - keyboards/lets_split/rev2/rev2.h | 11 ----------- keyboards/lets_split/ssd1306.c | 3 +-- keyboards/lets_split/ssd1306.h | 17 +++++++++++++++++ 5 files changed, 21 insertions(+), 14 deletions(-) create mode 100644 keyboards/lets_split/ssd1306.h diff --git a/keyboards/lets_split/keymaps/OLED_sample/keymap.c b/keyboards/lets_split/keymaps/OLED_sample/keymap.c index 072b825abe..493ebcd3f2 100644 --- a/keyboards/lets_split/keymaps/OLED_sample/keymap.c +++ b/keyboards/lets_split/keymaps/OLED_sample/keymap.c @@ -6,6 +6,9 @@ #ifdef AUDIO_ENABLE #include "audio.h" #endif +#ifdef SSD1306OLED + #include "ssd1306.h" +#endif extern keymap_config_t keymap_config; diff --git a/keyboards/lets_split/rev2/rev2.c b/keyboards/lets_split/rev2/rev2.c index 8bfa171d01..20a4c6be1e 100644 --- a/keyboards/lets_split/rev2/rev2.c +++ b/keyboards/lets_split/rev2/rev2.c @@ -37,4 +37,3 @@ void shutdown_user(void) { stop_all_notes(); #endif } - diff --git a/keyboards/lets_split/rev2/rev2.h b/keyboards/lets_split/rev2/rev2.h index 0603827e08..0c4e8e7de1 100644 --- a/keyboards/lets_split/rev2/rev2.h +++ b/keyboards/lets_split/rev2/rev2.h @@ -13,17 +13,6 @@ #include #include #endif -#ifdef SSD1306OLED - extern bool iota_gfx_init(void); - extern void iota_gfx_task(void); - extern bool iota_gfx_off(void); - extern bool iota_gfx_on(void); - extern void iota_gfx_flush(void); - extern void iota_gfx_write_char(uint8_t c); - extern void iota_gfx_write(const char *data); - extern void iota_gfx_write_P(const char *data); - extern void iota_gfx_clear_screen(void); -#endif #endif //void promicro_bootloader_jmp(bool program); diff --git a/keyboards/lets_split/ssd1306.c b/keyboards/lets_split/ssd1306.c index 3c7816bb32..76348ab7f2 100644 --- a/keyboards/lets_split/ssd1306.c +++ b/keyboards/lets_split/ssd1306.c @@ -1,8 +1,7 @@ +#include "ssd1306.h" #include "config.h" #include "i2c.h" -#include #include -#include #include "print.h" #include "lets_split.h" #include "common/glcdfont.c" diff --git a/keyboards/lets_split/ssd1306.h b/keyboards/lets_split/ssd1306.h new file mode 100644 index 0000000000..b0c74f987e --- /dev/null +++ b/keyboards/lets_split/ssd1306.h @@ -0,0 +1,17 @@ +#ifndef SSD1306_H +#define SSD1306_H + +#include +#include + +bool iota_gfx_init(void); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +#endif From 133ed52466f1a6d29974f1efc1deddcdafe773a8 Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Mon, 3 Apr 2017 13:23:23 -0400 Subject: [PATCH 21/28] =?UTF-8?q?Update=20Let=E2=80=99s=20Split=20readme?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- keyboards/lets_split/readme.md | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md index ecce3f4152..a8525a2e9d 100644 --- a/keyboards/lets_split/readme.md +++ b/keyboards/lets_split/readme.md @@ -7,6 +7,12 @@ Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 based boards. +## Build Guide + +A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide) + +There is additional information there about flashing and adding RGB underglow. + ## First Time Setup Download or clone the whole firmware and navigate to the keyboards/lets_split directory. Once your dev env is setup, you'll be able to generate the default .hex using: @@ -62,8 +68,8 @@ Apart from diodes and key switches for the keyboard matrix in each half, you will need: * 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each. -* 2 TRS sockets -* 1 TRS cable. +* 2 TRRS sockets +* 1 TRRS cable. Alternatively, you can use any sort of cable and socket that has at least 3 wires. If you want to use I2C to communicate between halves, you will need a @@ -77,7 +83,7 @@ A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and t Wiring ------ -The 3 wires of the TRS cable need to connect GND, VCC, and digital pin 3 (i.e. +The 3 wires of the TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. PD0 on the ATmega32u4) between the two Pro Micros. Then wire your key matrix to any of the remaining 17 IO pins of the pro micro From ed9c18e86650496627e3a94c29c370e76a6e8313 Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Mon, 3 Apr 2017 14:00:33 -0400 Subject: [PATCH 22/28] Remove flip-half from keymap --- keyboards/lets_split/keymaps/hexwire/config.h | 1 - 1 file changed, 1 deletion(-) diff --git a/keyboards/lets_split/keymaps/hexwire/config.h b/keyboards/lets_split/keymaps/hexwire/config.h index 27c24fe4be..e315d8c0c3 100644 --- a/keyboards/lets_split/keymaps/hexwire/config.h +++ b/keyboards/lets_split/keymaps/hexwire/config.h @@ -19,7 +19,6 @@ along with this program. If not, see . #define USE_SERIAL #define TAPPING_TERM 150 -#define FLIP_HALF #ifdef SUBPROJECT_rev1 #include "../../rev1/config.h" From 13c882a1fbd3fe3d4f703628df46f18fc69e09ea Mon Sep 17 00:00:00 2001 From: Erez Zukerman Date: Mon, 3 Apr 2017 15:11:42 -0400 Subject: [PATCH 23/28] disables space cadet rollover --- keyboards/ergodox/ez/config.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h index e4f95c302c..a3347de45e 100644 --- a/keyboards/ergodox/ez/config.h +++ b/keyboards/ergodox/ez/config.h @@ -49,6 +49,9 @@ along with this program. If not, see . #define RGBLIGHT_SAT_STEP 255 #define RGBLIGHT_VAL_STEP 12 +/* fix space cadet rollover issue */ +#define DISABLE_SPACE_CADET_ROLLOVER + // #define RGB_MIDI #define RGBW_BB_TWI From fbd9d04559962cb0db3a584d397f49371a4d7fb6 Mon Sep 17 00:00:00 2001 From: Danny Nguyen Date: Mon, 3 Apr 2017 16:16:46 -0400 Subject: [PATCH 24/28] Include use of either TRS or TRRS --- keyboards/lets_split/readme.md | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md index a8525a2e9d..7e5a546022 100644 --- a/keyboards/lets_split/readme.md +++ b/keyboards/lets_split/readme.md @@ -68,8 +68,7 @@ Apart from diodes and key switches for the keyboard matrix in each half, you will need: * 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each. -* 2 TRRS sockets -* 1 TRRS cable. +* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable Alternatively, you can use any sort of cable and socket that has at least 3 wires. If you want to use I2C to communicate between halves, you will need a @@ -83,7 +82,7 @@ A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and t Wiring ------ -The 3 wires of the TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. +The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. PD0 on the ATmega32u4) between the two Pro Micros. Then wire your key matrix to any of the remaining 17 IO pins of the pro micro From 1454d466e7180dd8f55a635a13153fc04a32d8bb Mon Sep 17 00:00:00 2001 From: Dan Saunders Date: Mon, 3 Apr 2017 15:14:45 -0600 Subject: [PATCH 25/28] Create twolayer.c fixed issue where Default.c "function key" does not work (actually it's changing my LED steps). Changed layout to be more user friendly for people that use the standard spacebar milled top plate. --- keyboards/atomic/keymaps/twolayer.c | 72 +++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 keyboards/atomic/keymaps/twolayer.c diff --git a/keyboards/atomic/keymaps/twolayer.c b/keyboards/atomic/keymaps/twolayer.c new file mode 100644 index 0000000000..8ea045d806 --- /dev/null +++ b/keyboards/atomic/keymaps/twolayer.c @@ -0,0 +1,72 @@ +#include "atomic.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* QWERTY - MIT ENHANCED / GRID COMPATIBLE + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | XXXXXX . BACKSP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | DEL | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | LCTRL1 | A | S | D | F | G | H | J | K | L | ; | ' | XXXXXX . ENTER | PG UP | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | LSHIFT | Z | X | C | V | B | N | M | , | . | / | XXXXXX . RSHIFT | UP | PG DN | + * |--------+--------+--------+--------+--------+- 6.25u ---------+--------+--------+--------+--------+-----------------+--------+--------| + * | BRITE | LALT | FN | XXXXXX . SPACE | RCTRL | RALT | FN | LEFT | DOWN | RIGHT | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [0] = { /* QWERTY */ + { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC }, + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL }, + { KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP }, + { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_PGDN }, + { M(0), KC_ALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RCTL, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT }, + }, + + +/* FUNCTION + * .---------------------------------------------------------------------------------------------------------------------- 2u ------------. + * | GRV | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | XXXXXX . | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------| + * | SCR LK | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | F21 | F22 | F23 | F24 | PAUSE | PR SCR | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------| + * | CAP LK | MS BT5 | MS BT4 | MS BT3 | MS BT2 | SLOW M | FAST M | NEXT | VOL+ | VOL- | PLAY | | XXXXXX . | WHEEL+ | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------| + * | NUM LK | | | | | | | | INSERT | END1 | HOME | XXXXXX . | MOUS U | WHEEL- | + * |--------+--------+--------+--------+--------+- 6.25 ------------+--------+--------+------+--------+-----------------+--------+--------| + * | | | FN | XXXXXX . MS BT1 | | | FN | MOUS L | MOUS D | MOUS R | + * '--------------------------------------------------------------------------------------------------------------------------------------' + */ + + [1] = { /* FUNCTION LAYER*/ + { KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, ___T___, ___T___ }, + { KC_SLCK, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_PAUS, KC_PSCR }, + { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U }, + { KC_NLCK, _______, _______, _______, _______, _______, _______, _______, KC_INSERT, KC_END, KC_HOME, ___T___, ___T___, KC_MS_U, KC_WH_D }, + { _______, _______, MO(1), _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, MO(1), KC_MS_L, KC_MS_D, KC_MS_R }, + }, +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), + [2] = ACTION_LAYER_MOMENTARY(1), +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; From e18768aa77985e3695f34b71f0e84547293e8104 Mon Sep 17 00:00:00 2001 From: Adam YH Lee Date: Mon, 21 Nov 2016 08:22:14 -0800 Subject: [PATCH 26/28] Add B1gtuna Miuni32 Miuni32 is a 30% ortholinear board. Please visit www.bigtuna.io for more information. --- keyboards/miuni32/Makefile | 3 + keyboards/miuni32/config.h | 170 ++++++++++++++++++++ keyboards/miuni32/keymaps/default/Makefile | 21 +++ keyboards/miuni32/keymaps/default/config.h | 8 + keyboards/miuni32/keymaps/default/keymap.c | 49 ++++++ keyboards/miuni32/keymaps/default/readme.md | 1 + keyboards/miuni32/miuni32.c | 28 ++++ keyboards/miuni32/miuni32.h | 15 ++ keyboards/miuni32/readme.md | 28 ++++ keyboards/miuni32/rules.mk | 67 ++++++++ 10 files changed, 390 insertions(+) create mode 100644 keyboards/miuni32/Makefile create mode 100644 keyboards/miuni32/config.h create mode 100644 keyboards/miuni32/keymaps/default/Makefile create mode 100644 keyboards/miuni32/keymaps/default/config.h create mode 100644 keyboards/miuni32/keymaps/default/keymap.c create mode 100644 keyboards/miuni32/keymaps/default/readme.md create mode 100644 keyboards/miuni32/miuni32.c create mode 100644 keyboards/miuni32/miuni32.h create mode 100644 keyboards/miuni32/readme.md create mode 100644 keyboards/miuni32/rules.mk diff --git a/keyboards/miuni32/Makefile b/keyboards/miuni32/Makefile new file mode 100644 index 0000000000..57b2ef62e5 --- /dev/null +++ b/keyboards/miuni32/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/miuni32/config.h b/keyboards/miuni32/config.h new file mode 100644 index 0000000000..4f9b685518 --- /dev/null +++ b/keyboards/miuni32/config.h @@ -0,0 +1,170 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Bigtuna.io +#define PRODUCT Miuni32 +#define DESCRIPTION A custom keyboard for writers + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 11 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F0, F4, D7} +#define MATRIX_COL_PINS { C6, C7, F7, F6, F1, E6, B7, B3, B2, B1, B0} +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#define RGBLIGHT_TIMER +#define RGB_DI_PIN D0 // The pin your RGB strip is wired to +#define RGBLIGHT_TIMER // Require for fancier stuff (not compatible with audio) +#define RGBLED_NUM 7 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#endif diff --git a/keyboards/miuni32/keymaps/default/Makefile b/keyboards/miuni32/keymaps/default/Makefile new file mode 100644 index 0000000000..88a3aea741 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/miuni32/keymaps/default/config.h b/keyboards/miuni32/keymaps/default/config.h new file mode 100644 index 0000000000..df06a26206 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif \ No newline at end of file diff --git a/keyboards/miuni32/keymaps/default/keymap.c b/keyboards/miuni32/keymaps/default/keymap.c new file mode 100644 index 0000000000..15e2fa45c0 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/keymap.c @@ -0,0 +1,49 @@ +#include "miuni32.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] ={ + {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_RSFT, KC_ENT}, + {KC_Z, KC_X, KC_C, KC_V, KC_V, KC_SPC, KC_B, KC_N, KC_M , MO(1), KC_RCTL} + }, +[1] ={ + {KC_PGUP, KC_UP, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL}, + {KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_END, KC_TRNS}, + {RGB_TOG, RGB_HUI, RGB_HUD, RGB_SAI, KC_TRNS, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, RGB_MOD}, + } +}; +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/miuni32/keymaps/default/readme.md b/keyboards/miuni32/keymaps/default/readme.md new file mode 100644 index 0000000000..4cff8ef5a3 --- /dev/null +++ b/keyboards/miuni32/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for miuni32 \ No newline at end of file diff --git a/keyboards/miuni32/miuni32.c b/keyboards/miuni32/miuni32.c new file mode 100644 index 0000000000..1c1983a564 --- /dev/null +++ b/keyboards/miuni32/miuni32.c @@ -0,0 +1,28 @@ +#include "miuni32.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/miuni32/miuni32.h b/keyboards/miuni32/miuni32.h new file mode 100644 index 0000000000..eecb17f81f --- /dev/null +++ b/keyboards/miuni32/miuni32.h @@ -0,0 +1,15 @@ +#ifndef MIUNI32_H +#define MIUNI32_H + +#include "quantum.h" + +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A ) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A } \ +} + +#endif diff --git a/keyboards/miuni32/readme.md b/keyboards/miuni32/readme.md new file mode 100644 index 0000000000..36696ddbcb --- /dev/null +++ b/keyboards/miuni32/readme.md @@ -0,0 +1,28 @@ +miuni32 keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/miuni32 folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|] +``` + +Keymaps follow the format **__\.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/miuni32/rules.mk b/keyboards/miuni32/rules.mk new file mode 100644 index 0000000000..55898147dd --- /dev/null +++ b/keyboards/miuni32/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 From 8e7be3adda577ab58ed942d83e0d2ebd4ab07f88 Mon Sep 17 00:00:00 2001 From: Adam Lee Date: Tue, 4 Apr 2017 10:21:32 -0700 Subject: [PATCH 27/28] Set Bootloader Size to 4K Use Atmel's default bootloader size, rather than Teensy 2.0's [1]. [1] https://github.com/qmk/qmk_firmware/pull/1207#discussion_r109712786 --- keyboards/miuni32/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/miuni32/rules.mk b/keyboards/miuni32/rules.mk index 55898147dd..ef8daf3caa 100644 --- a/keyboards/miuni32/rules.mk +++ b/keyboards/miuni32/rules.mk @@ -45,7 +45,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT # Atmel DFU loader 4096 # LUFA bootloader 4096 # USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=512 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options From 154305ce1be16b2c8abce5e5d4dee421f295d6b3 Mon Sep 17 00:00:00 2001 From: Gabe Y Date: Tue, 4 Apr 2017 22:39:28 -0700 Subject: [PATCH 28/28] Fix formatting in BUILD_GUIDE.md (#1208) --- doc/BUILD_GUIDE.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/doc/BUILD_GUIDE.md b/doc/BUILD_GUIDE.md index 1750191836..78cf00b917 100644 --- a/doc/BUILD_GUIDE.md +++ b/doc/BUILD_GUIDE.md @@ -96,7 +96,7 @@ The keyboard `config.h` is included only if the keymap one doesn't exist. The fo ``` #undef MY_SETTING #define MY_SETTING 4 -```c +``` For a value of `4` for this imaginary setting. So we `undef` it first, then `define` it.