(develop)AP2: Enable support for WL EEPROM Driver (#17506)

keyboards/annepro2/c15/config.h

@@ -49,3 +49,21 @@
 
 // Obins stock firmware has something similar to this already enabled, but disabled by default in QMK
 #define PERMISSIVE_HOLD
+
+// SPI configuration
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN A0
+#define SPI_MOSI_PIN A1
+#define SPI_MISO_PIN A2
+
+// Flash configuration
+#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B6
+#define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 16
+#define EXTERNAL_FLASH_PAGE_SIZE 256
+#define EXTERNAL_FLASH_SECTOR_SIZE 4096
+#define EXTERNAL_FLASH_BLOCK_SIZE 4096
+#define EXTERNAL_FLASH_SIZE (256 * 1024) // 2M-bit flash size
+
+// Wear-leveling driver configuration
+#define WEAR_LEVELING_LOGICAL_SIZE 1024
+#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2)

keyboards/annepro2/c15/rules.mk

@@ -26,6 +26,10 @@ BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
 
+# Wear-levelling driver
+EEPROM_DRIVER = wear_leveling
+WEAR_LEVELING_DRIVER = spi_flash
+
 # Custom RGB matrix handling
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = custom

keyboards/annepro2/c18/config.h

@@ -47,3 +47,21 @@
 
 // Obins stock firmware has something similar to this already enabled, but disabled by default in QMK
 #define PERMISSIVE_HOLD
+
+// SPI configuration
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN A0
+#define SPI_MOSI_PIN A1
+#define SPI_MISO_PIN A2
+
+// Flash configuration
+#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN A3
+#define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 16
+#define EXTERNAL_FLASH_PAGE_SIZE 256
+#define EXTERNAL_FLASH_SECTOR_SIZE 4096
+#define EXTERNAL_FLASH_BLOCK_SIZE 4096
+#define EXTERNAL_FLASH_SIZE (256 * 1024) // 2M-bit flash size
+
+// Wear-leveling driver configuration
+#define WEAR_LEVELING_LOGICAL_SIZE 1024
+#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2)

keyboards/annepro2/c18/rules.mk

@@ -26,6 +26,10 @@ BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
 
+# Wear-levelling driver
+EEPROM_DRIVER = wear_leveling
+WEAR_LEVELING_DRIVER = spi_flash
+
 # Custom RGB matrix handling
 RGB_MATRIX_ENABLE = yes
 RGB_MATRIX_DRIVER = custom

keyboards/annepro2/halconf.h

@@ -25,4 +25,8 @@
 
 #define SERIAL_USB_BUFFERS_SIZE 256
 
+#define HAL_USE_SPI TRUE
+#define SPI_USE_WAIT TRUE
+#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+
 #include_next <halconf.h>

keyboards/annepro2/mcuconf.h

@@ -60,3 +60,11 @@
 
 #define HT32_USB_USE_USB0 TRUE
 #define HT32_USB_USB0_IRQ_PRIORITY 5
+
+/*
+ * SPI driver setting
+ */
+
+#define HT32_SPI_USE_SPI1 TRUE
+#define HT32_SPI1_IRQ_PRIORITY 9
+