Refactor the crkbd/via keymap and fix OLED bugs (#10354)

* Refactor the crkbd/via keymap and fix OLED bugs

* Revert "Refactor the crkbd/via keymap and fix OLED bugs"

This reverts commit dc9db029fc6b077fc7600b49e920b755c522d100.

* Fix OLED display bugs

* Remove unused functions

* Remove uncessary the key logger

* Add new lines at end of file

* Remove unnecesary extern for is_master

* Remove extern is_master from rev1.h

* Remove ssd1306 from common dir because its the legacy lib

* Update default keymap based the via keymap

* Remove foostan keymap because it will be legacy

* Revert Remove unnecesary extern for is_master

* Remove unnecessary backslashes.
This commit is contained in:
Kosuke Adachi 2020-11-17 14:18:45 +09:00 committed by GitHub
parent 88c09aa892
commit 503b762538
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
15 changed files with 129 additions and 881 deletions

View File

@ -28,8 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define MASTER_RIGHT
// #define EE_HANDS
#define SSD1306OLED
#define USE_SERIAL_PD2
#define TAPPING_FORCE_HOLD
@ -44,3 +42,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
#endif
#define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c"

View File

@ -18,218 +18,157 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include QMK_KEYBOARD_H
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 3
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
BACKLIT,
RGBRST
};
enum macro_keycodes {
KC_SAMPLEMACRO,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_split_3x6_3( \
[0] = LAYOUT_split_3x6_3(
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,\
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,\
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ESC,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \
KC_LGUI, MO(1), KC_SPC, KC_ENT, MO(2), KC_RALT
//`--------------------------' `--------------------------'
),
[_LOWER] = LAYOUT_split_3x6_3( \
[1] = LAYOUT_split_3x6_3(
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,\
KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, XXXXXXX, XXXXXXX,\
KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, XXXXXXX, XXXXXXX,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \
//`--------------------------' `--------------------------'
),
[_RAISE] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,\
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV,\
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD,\
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \
KC_LGUI, _______, KC_SPC, KC_ENT, MO(3), KC_RALT
//`--------------------------' `--------------------------'
),
[_ADJUST] = LAYOUT_split_3x6_3( \
[2] = LAYOUT_split_3x6_3(
//,-----------------------------------------------------. ,-----------------------------------------------------.
RESET, RGBRST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
KC_TAB, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_TILD,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \
KC_LGUI, MO(3), KC_SPC, KC_ENT, _______, KC_RALT
//`--------------------------' `--------------------------'
),
[3] = LAYOUT_split_3x6_3(
//,-----------------------------------------------------. ,-----------------------------------------------------.
RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT
//`--------------------------' `--------------------------'
)
};
int RGB_current_mode;
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
#ifdef OLED_DRIVER_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!is_master) {
return OLED_ROTATION_180; // flips the display 180 degrees if offhand
}
return rotation;
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
#define L_BASE 0
#define L_LOWER 2
#define L_RAISE 4
#define L_ADJUST 8
void oled_render_layer_state(void) {
oled_write_P(PSTR("Layer: "), false);
switch (layer_state) {
case L_BASE:
oled_write_ln_P(PSTR("Default"), false);
break;
case L_LOWER:
oled_write_ln_P(PSTR("Lower"), false);
break;
case L_RAISE:
oled_write_ln_P(PSTR("Raise"), false);
break;
case L_ADJUST:
case L_ADJUST|L_LOWER:
case L_ADJUST|L_RAISE:
case L_ADJUST|L_LOWER|L_RAISE:
oled_write_ln_P(PSTR("Adjust"), false);
break;
}
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
char keylog_str[24] = {};
// const char *read_mode_icon(bool swap);
// const char *read_host_led_state(void);
// void set_timelog(void);
// const char *read_timelog(void);
const char code_to_name[60] = {
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
'1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
'#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
void matrix_scan_user(void) {
iota_gfx_task();
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
//matrix_write_ln(matrix, read_keylogs());
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
//matrix_write_ln(matrix, read_host_led_state());
//matrix_write_ln(matrix, read_timelog());
} else {
matrix_write(matrix, read_logo());
void set_keylog(uint16_t keycode, keyrecord_t *record) {
char name = ' ';
if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) ||
(keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; }
if (keycode < 60) {
name = code_to_name[keycode];
}
// update keylog
snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
record->event.key.row, record->event.key.col,
keycode, name);
}
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
void oled_render_keylog(void) {
oled_write(keylog_str, false);
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_render_user(&matrix);
matrix_update(&display, &matrix);
void render_bootmagic_status(bool status) {
/* Show Ctrl-Gui Swap options */
static const char PROGMEM logo[][2][3] = {
{{0x97, 0x98, 0}, {0xb7, 0xb8, 0}},
{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}},
};
if (status) {
oled_write_ln_P(logo[0][0], false);
oled_write_ln_P(logo[0][1], false);
} else {
oled_write_ln_P(logo[1][0], false);
oled_write_ln_P(logo[1][1], false);
}
}
void oled_render_logo(void) {
static const char PROGMEM crkbd_logo[] = {
0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
0};
oled_write_P(crkbd_logo, false);
}
void oled_task_user(void) {
if (is_master) {
oled_render_layer_state();
oled_render_keylog();
} else {
oled_render_logo();
}
}
#endif//SSD1306OLED
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
#ifdef SSD1306OLED
set_keylog(keycode, record);
#endif
// set_timelog();
}
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
case RGB_MOD:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
#endif
return false;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
break;
}
return true;
}
#endif // OLED_DRIVER_ENABLE

View File

@ -1,10 +1 @@
# If you want to change the display of OLED, you need to change here
SRC += ./lib/glcdfont.c \
./lib/rgb_state_reader.c \
./lib/layer_state_reader.c \
./lib/logo_reader.c \
./lib/keylogger.c \
# ./lib/mode_icon_reader.c \
# ./lib/host_led_state_reader.c \
# ./lib/timelogger.c \
OLED_DRIVER_ENABLE = yes

View File

@ -1,44 +0,0 @@
/*
This is the c configuration file for the keymap
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#define SSD1306OLED
#define USE_SERIAL_PD2
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 100
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 27
#define RGBLIGHT_LIMIT_VAL 120
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17

View File

@ -1,241 +0,0 @@
#include QMK_KEYBOARD_H
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 3
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
BACKLIT,
RGBRST
};
enum macro_keycodes {
KC_SAMPLEMACRO,
};
#define KC______ KC_TRNS
#define KC_XXXXX KC_NO
#define KC_LOWER LOWER
#define KC_RAISE RAISE
#define KC_RST RESET
#define KC_LRST RGBRST
#define KC_LTOG RGB_TOG
#define KC_LHUI RGB_HUI
#define KC_LHUD RGB_HUD
#define KC_LSAI RGB_SAI
#define KC_LSAD RGB_SAD
#define KC_LVAI RGB_VAI
#define KC_LVAD RGB_VAD
#define KC_LMOD RGB_MOD
#define KC_GUIEI GUI_T(KC_LANG2)
#define KC_ALTKN ALT_T(KC_LANG1)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ESC,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LCTL, F1, F2, F3, F4, F5, LEFT, DOWN, UP, RIGHT, XXXXX, XXXXX,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LSFT, F6, F7, F8, F9, F10, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
TAB, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LCTL, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, GRV,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, UNDS, PLUS, LBRC, RBRC, BSLS, TILD,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
//`--------------------' `--------------------'
)
};
int RGB_current_mode;
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
// const char *read_mode_icon(bool swap);
// const char *read_host_led_state(void);
// void set_timelog(void);
// const char *read_timelog(void);
void matrix_scan_user(void) {
iota_gfx_task();
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
//matrix_write_ln(matrix, read_host_led_state());
//matrix_write_ln(matrix, read_timelog());
} else {
matrix_write(matrix, read_logo());
}
}
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_render_user(&matrix);
matrix_update(&display, &matrix);
}
#endif//SSD1306OLED
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
#ifdef SSD1306OLED
set_keylog(keycode, record);
#endif
// set_timelog();
}
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
case RGB_MOD:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
#endif
return false;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
break;
}
return true;
}

View File

@ -1,10 +0,0 @@
# If you want to change the display of OLED, you need to change here
SRC += ./lib/glcdfont.c \
./lib/rgb_state_reader.c \
./lib/layer_state_reader.c \
./lib/logo_reader.c \
./lib/keylogger.c \
# ./lib/mode_icon_reader.c \
# ./lib/host_led_state_reader.c \
# ./lib/timelogger.c \

View File

@ -17,5 +17,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "common.h"
uint8_t is_master;

View File

@ -21,4 +21,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "rev1.h"
#define has_usb() is_keyboard_master()
extern uint8_t is_master;
#define is_master is_keyboard_master()

View File

@ -19,7 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_split_3x6_3( \
[0] = LAYOUT_split_3x6_3(
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[1] = LAYOUT_split_3x6_3( \
[1] = LAYOUT_split_3x6_3(
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@ -40,11 +40,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT\
KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT
//`--------------------------' `--------------------------'
),
[2] = LAYOUT_split_3x6_3( \
[2] = LAYOUT_split_3x6_3(
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_TAB, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@ -56,15 +56,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`--------------------------' `--------------------------'
),
[3] = LAYOUT_split_3x6_3( \
[3] = LAYOUT_split_3x6_3(
//,-----------------------------------------------------. ,-----------------------------------------------------.
RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT\
KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT
//`--------------------------' `--------------------------'
)
};
@ -83,30 +83,28 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) {
#define L_ADJUST 8
void oled_render_layer_state(void) {
oled_write_P("Layer: ", false);
oled_write_P(PSTR("Layer: "), false);
switch (layer_state) {
case L_BASE:
oled_write_ln_P("Default", false);
oled_write_ln_P(PSTR("Default"), false);
break;
case L_LOWER:
oled_write_ln_P("Lower", false);
oled_write_ln_P(PSTR("Lower"), false);
break;
case L_RAISE:
oled_write_ln_P("Raise", false);
oled_write_ln_P(PSTR("Raise"), false);
break;
case L_ADJUST:
case L_ADJUST|L_LOWER:
case L_ADJUST|L_RAISE:
case L_ADJUST|L_LOWER|L_RAISE:
oled_write_ln_P("Adjust", false);
oled_write_ln_P(PSTR("Adjust"), false);
break;
}
}
char keylog_str[24] = {};
char keylogs_str[21] = {};
int keylogs_str_idx = 0;
const char code_to_name[60] = {
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
@ -128,25 +126,11 @@ void set_keylog(uint16_t keycode, keyrecord_t *record) {
snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
record->event.key.row, record->event.key.col,
keycode, name);
// update keylogs
if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
keylogs_str_idx = 0;
for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
keylogs_str[i] = ' ';
}
}
keylogs_str[keylogs_str_idx] = name;
keylogs_str_idx++;
}
void oled_render_keylog(void) {
oled_write(keylog_str, false);
}
void oled_render_keylogs(void) {
oled_write(keylogs_str, false);
}
void render_bootmagic_status(bool status) {
/* Show Ctrl-Gui Swap options */
@ -176,8 +160,6 @@ void oled_task_user(void) {
if (is_master) {
oled_render_layer_state();
oled_render_keylog();
// oled_render_keylogs();
// oled_renger_bootmagic_icon(keymap_config.swap_lalt_lgui);
} else {
oled_render_logo();
}
@ -186,7 +168,6 @@ void oled_task_user(void) {
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
set_keylog(keycode, record);
// set_timelog();
}
return true;
}

View File

@ -1,360 +0,0 @@
#ifdef SSD1306OLED
#include "ssd1306.h"
#include "i2c_master.h"
#include <string.h>
#include "print.h"
#ifdef ADAFRUIT_BLE_ENABLE
#include "adafruit_ble.h"
#endif
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#endif
#include "sendchar.h"
#include "timer.h"
struct CharacterMatrix display;
extern const unsigned char font[] PROGMEM;
#ifndef OLED_BLANK_CHAR
#define OLED_BLANK_CHAR ' '
#endif
#ifndef OLED_BITS_FILTER
#define OLED_BITS_FILTER
#endif
// Set this to 1 to help diagnose early startup problems
// when testing power-on with ble. Turn it off otherwise,
// as the latency of printing most of the debug info messes
// with the matrix scan, causing keys to drop.
#define DEBUG_TO_SCREEN 0
//static uint16_t last_battery_update;
//static uint32_t vbat;
//#define BatteryUpdateInterval 10000 /* milliseconds */
// 'last_flush' is declared as uint16_t,
// so this must be less than 65535
#ifndef ScreenOffInterval
#define ScreenOffInterval 60000 /* milliseconds */
#endif
#if DEBUG_TO_SCREEN
static uint8_t displaying;
#endif
static uint16_t last_flush;
static bool force_dirty = true;
// Write command sequence.
// Returns true on success.
static inline bool _send_cmd1(uint8_t cmd) {
bool res = false;
if (i2c_start(SSD1306_ADDRESS, 100)) {
xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
goto done;
}
if (i2c_write(0x0 /* command byte follows */, 100)) {
print("failed to write control byte\n");
goto done;
}
if (i2c_write(cmd, 100)) {
xprintf("failed to write command %d\n", cmd);
goto done;
}
res = true;
done:
i2c_stop();
return res;
}
#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
#define send_cmds(c) if (!_send_cmds(c,sizeof(c))) {goto done;}
#define cmd1(X) X
#define cmd2(X,Y) X,Y
#define cmd3(X,Y,Z) X,Y,Z
static bool _send_cmds(const uint8_t* p,uint8_t sz) {
for(uint8_t i=sz;i;i--) {
send_cmd1( pgm_read_byte(p++) );
}
return true;
done:
return false;
}
#define SEND_CMDS(...) {static const uint8_t _cmds[] PROGMEM = { __VA_ARGS__,0 };send_cmds(_cmds);}
static void clear_display(void) {
matrix_clear(&display);
// Clear all of the display bits (there can be random noise
// in the RAM on startup)
SEND_CMDS(
cmd3(PageAddr, 0, (DisplayHeight / 8) - 1),
cmd3(ColumnAddr, 0, DisplayWidth - 1)
);
if (i2c_start(SSD1306_ADDRESS, 100)) {
goto done;
}
if (i2c_write(0x40, 100)) {
// Data mode
goto done;
}
for (uint8_t row = MatrixRows;row; row--) {
for (uint8_t col = DisplayWidth; col; col--) {
i2c_write(0, 100);
}
}
display.dirty = false;
done:
i2c_stop();
}
#if DEBUG_TO_SCREEN
#undef sendchar
static int8_t capture_sendchar(uint8_t c) {
sendchar(c);
iota_gfx_write_char(c);
if (!displaying) {
iota_gfx_flush();
}
return 0;
}
#endif
bool iota_gfx_init(bool rotate) {
bool success = false;
i2c_init();
SEND_CMDS(
cmd1(DisplayOff),
cmd2(SetDisplayClockDiv, 0x80),
cmd2(SetMultiPlex, DisplayHeight - 1),
cmd2(SetDisplayOffset, 0),
cmd1(SetStartLine | 0x0),
cmd2(SetChargePump, 0x14 /* Enable */),
cmd2(SetMemoryMode, 0 /* horizontal addressing */)
);
if(rotate){
// the following Flip the display orientation 180 degrees
SEND_CMDS(
cmd1(SegRemap),
cmd1(ComScanInc)
);
}else{
// Flips the display orientation 0 degrees
SEND_CMDS(
cmd1(SegRemap | 0x1),
cmd1(ComScanDec)
);
}
SEND_CMDS(
#ifdef SSD1306_128X64
cmd2(SetComPins, 0x12),
#else
cmd2(SetComPins, 0x2),
#endif
cmd2(SetContrast, 0x8f),
cmd2(SetPreCharge, 0xf1),
cmd2(SetVComDetect, 0x40),
cmd1(DisplayAllOnResume),
cmd1(NormalDisplay),
cmd1(DeActivateScroll),
cmd1(DisplayOn),
cmd2(SetContrast, 0) // Dim
);
clear_display();
success = true;
iota_gfx_flush();
#if DEBUG_TO_SCREEN
print_set_sendchar(capture_sendchar);
#endif
done:
return success;
}
bool iota_gfx_off(void) {
bool success = false;
send_cmd1(DisplayOff);
success = true;
done:
return success;
}
bool iota_gfx_on(void) {
bool success = false;
send_cmd1(DisplayOn);
success = true;
done:
return success;
}
void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
*matrix->cursor = c;
++matrix->cursor;
if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
// We went off the end; scroll the display upwards by one line
memmove(&matrix->display[0], &matrix->display[1],
MatrixCols * (MatrixRows - 1));
matrix->cursor = &matrix->display[MatrixRows - 1][0];
memset(matrix->cursor, OLED_BLANK_CHAR, MatrixCols);
}
}
void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
matrix->dirty = true;
if (c == '\n') {
// Clear to end of line from the cursor and then move to the
// start of the next line
uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
while (cursor_col++ < MatrixCols) {
matrix_write_char_inner(matrix, OLED_BLANK_CHAR);
}
return;
}
matrix_write_char_inner(matrix, c);
}
void iota_gfx_write_char(uint8_t c) {
matrix_write_char(&display, c);
}
void matrix_write(struct CharacterMatrix *matrix, const char *data) {
while (*data) {
matrix_write_char(matrix, *data);
++data;
}
}
void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) {
matrix_write(matrix, data);
matrix_write(matrix, "\n");
}
void iota_gfx_write(const char *data) {
matrix_write(&display, data);
}
void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
while (true) {
uint8_t c = pgm_read_byte(data);
if (c == 0) {
return;
}
matrix_write_char(matrix, c);
++data;
}
}
void iota_gfx_write_P(const char *data) {
matrix_write_P(&display, data);
}
void matrix_clear(struct CharacterMatrix *matrix) {
memset(matrix->display, OLED_BLANK_CHAR, sizeof(matrix->display));
matrix->cursor = &matrix->display[0][0];
matrix->dirty = true;
}
void iota_gfx_clear_screen(void) {
matrix_clear(&display);
}
void matrix_render(struct CharacterMatrix *matrix) {
last_flush = timer_read();
iota_gfx_on();
#if DEBUG_TO_SCREEN
++displaying;
#endif
// Move to the home position
SEND_CMDS(
cmd3(PageAddr, 0, MatrixRows - 1),
cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1)
);
if (i2c_write(SSD1306_ADDRESS, 100)) {
goto done;
}
if (i2c_write(0x40, 100)) {
// Data mode
goto done;
}
for (uint8_t row = 0; row < MatrixRows; ++row) {
for (uint8_t col = 0; col < MatrixCols; ++col) {
const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
uint8_t colBits = pgm_read_byte(glyph + glyphCol);
i2c_write(colBits OLED_BITS_FILTER, 100);
}
// 1 column of space between chars (it's not included in the glyph)
//i2c_master_write(0);
}
}
matrix->dirty = false;
done:
i2c_stop();
#if DEBUG_TO_SCREEN
--displaying;
#endif
}
void iota_gfx_flush(void) {
matrix_render(&display);
}
__attribute__ ((weak))
void iota_gfx_task_user(void) {
}
void iota_gfx_task(void) {
iota_gfx_task_user();
if (display.dirty|| force_dirty) {
iota_gfx_flush();
force_dirty = false;
}
if (ScreenOffInterval !=0 && timer_elapsed(last_flush) > ScreenOffInterval) {
iota_gfx_off();
}
}
bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
force_dirty = true;
return true;
}
#endif

View File

@ -19,3 +19,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#include "rev1.h"
extern uint8_t is_master;

View File

@ -87,10 +87,6 @@ led_config_t g_led_config = { {
void matrix_init_kb(void) {
#ifdef KEYBOARD_crkbd_rev1_common
is_master = (uint8_t)is_keyboard_master();
#endif
#ifdef RGB_MATRIX_ENABLE
if (!isLeftHand) {
g_led_config = (led_config_t){ {

View File

@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
extern uint8_t is_master;
#include "crkbd.h"
#if defined(KEYBOARD_crkbd_rev1_legacy)
# include "legacy.h"

View File

@ -16,8 +16,6 @@
#include "drashna.h"
extern uint8_t is_master;
#ifdef RGBLIGHT_ENABLE
// Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;