masq
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[keyboard] bastardkb: restructure folder hierarchy (#16778) 

* bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus

Upcoming support for the following (adapter, mcu) pairs will be
submitted in follow-up PRs:

- `v2/elitec`
- `v2/stemcell`
- `blackpill`

This PR contains the following changes:

- Move previous implementation to an inner `v1/elitec` folder
- Move keyboard USB IDs and strings to data driven
- Update headers to update maintainers list
- Run `qmk format-c`

* bastardkb/charybdis: remove broken acceleration implementation

* bastardkb/charybdis: fix debug output

* bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair

* bastardkb: add Blackpill support

* bastardkb/charybdis/3x5: add `bstiq` keymap

* bastardkb/charybdis: add fake LEDs to the configuration

For the Charybdis 3x5 (respectively 4x6), the LED config now simulates
36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to
prevent confusion when testing LEDs during assembly when handedness is
not set correctly.  Those fake LEDs are bound to the physical
bottom-left corner.

* bastardkbk/charybdis/readme.md: update build commands

Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield.

* bastardkb/charybdis: fix Via keymap with blackpill

* bastardkb/charybdis: add 3x6 configuration

* bastardkb/charybdis: remove unnecessary files

* bastardkb/charybdis: remove obsolete code

* bastardkb/charybdis/3x6: add Via keymap

* bastardkb: add support for Splinky (RP2040) board

* bastardkb: initial configuration for the Splinky (SPI not working yet)

* bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball

* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins

* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins

* bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball

* bastardkb/charybdis/3x6: add splinky config

* bastardkb/*/v2/splinky: update drivers to `vendor`

* bastardkb/dilemma: add new board

* bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps

* bastardkb/dilemma: add `bstiq` keymap

* bastardkb: specify blackpill boards

* bastardkb/charybdis: fix blackpill-specific define syntax

* bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options

* bastardkb: fix `QK_BOOT` keycodes

* bastardkb/dilemma: fix mouse direction on X axis

* bastardkb/charybdis/3x6: adjust CS

* bastardkb/dilemma: adjust trackpad configuration

* charybdis: fix `PWM33XX_CS_PIN` defines

This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613.

* bastardkb: remove Vial mentions from `bstiq` keymaps

* Cleanup unnecessary comments

Co-authored-by: Nathan <nathan.cooke@compass.com>
Co-authored-by: Charly Delay <0xcharly@codesink.dev>
This commit is contained in:
Charly Delay 2022-07-25 18:11:28 +09:00 committed by GitHub
parent 336df3297e
commit 50a12c06b9
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
156 changed files with 5260 additions and 643 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
keyboards/bastardkb/charybdis/3x5/3x5.c
View File

@ -33,6 +33,10 @@
* ╰────────────────────╯ ╰────────────────────╯
* 15 16 17 33 34 XX
* ╰────────────╯ ╰────────────╯
*
* Note: the LED config simulates 36 LEDs instead of the actual 35 to prevent
* confusion when testing LEDs during assembly when handedness is not set
* correctly. Those fake LEDs are bound to the physical top-left corner.
*/
led_config_t g_led_config = { {
/* Key Matrix to LED index. */
@ -61,7 +65,7 @@ led_config_t g_led_config = { {
/* index=24 */ { 188, 42 }, { 188, 21 }, { 188, 0 },
/* index=27 */ { 170, 0 }, { 170, 21 }, { 170, 42 },
/* index=30 */ { 152, 0 }, { 152, 21 }, { 152, 42 },
/* index=33 */ { 152, 64 }, { 134, 64 },
/* index=33 */ { 134, 64 }, { 152, 64 }, { 0, 0 },
}, {
/* LED index to flag. */
// Left split.
@ -77,7 +81,7 @@ led_config_t g_led_config = { {
/* index=24 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=27 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=30 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=33 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // Thumb cluster
/* index=33 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // Thumb cluster
} };
#endif
// clang-format on

62
keyboards/bastardkb/charybdis/3x5/blackpill/config.h Normal file
View File

@ -0,0 +1,62 @@
/*
* Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna)
* Copyright 2021 Stefan Kerkmann (@KarlK90)
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Publicw License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ A2, B8, A8, B9 }
#define MATRIX_COL_PINS \
{ B1, B10, B3, B4, B5 }
/* Handedness. */
#define SPLIT_HAND_PIN A3 // High -> left, Low -> right.
/* RGB settings. */
#define RGB_DI_PIN A1
#define WS2812_PWM_DRIVER PWMD2
#define WS2812_PWM_CHANNEL 2
#define WS2812_PWM_PAL_MODE 1
#define WS2812_EXTERNAL_PULLUP
#define WS2812_DMA_STREAM STM32_DMA1_STREAM1
#define WS2812_DMA_CHANNEL 3
#define WS2812_PWM_TARGET_PERIOD 800000
/* Serial configuration for split keyboard. */
#define SERIAL_USART_TX_PIN A9
/* CRC. */
#define CRC8_USE_TABLE
#define CRC8_OPTIMIZE_SPEED
/* SPI config for EEPROM and pmw3360 sensor. */
#define SPI_DRIVER SPID1
#define SPI_SCK_PIN A5
#define SPI_SCK_PAL_MODE 5
#define SPI_MOSI_PIN A7
#define SPI_MOSI_PAL_MODE 5
#define SPI_MISO_PIN A6
#define SPI_MISO_PAL_MODE 5
/* EEPROM config. */
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
/* PMW3360 settings. */
#define PMW33XX_CS_PIN B14
#define PMW33XX_CS_DIVISOR 64

29
keyboards/bastardkb/charybdis/3x5/blackpill/halconf.h Normal file
View File

@ -0,0 +1,29 @@
/*
* Copyright 2020 Nick Brassel (tzarc)
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define HAL_USE_PWM TRUE
#define HAL_USE_SERIAL TRUE
//#define HAL_USE_I2C TRUE
#define HAL_USE_SPI TRUE
#define SPI_USE_WAIT TRUE
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
//#define HAL_USE_GPT TRUE
#include_next "halconf.h"

6
keyboards/bastardkb/charybdis/3x5/blackpill/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis Nano (3x5) Blackpill",
"usb": {
"device_version": "1.0.0",
},
}

61
keyboards/bastardkb/charybdis/3x5/blackpill/mcuconf.h Normal file
View File

@ -0,0 +1,61 @@
/*
* Copyright 2020 Nick Brassel (tzarc)
* Copyright 2021 Stefan Kerkmann (@KarlK90)
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include_next "mcuconf.h"
#undef STM32_I2C_USE_I2C1
#define STM32_I2C_USE_I2C1 TRUE
#undef STM32_I2C_I2C1_RX_DMA_STREAM
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
#undef STM32_I2C_I2C1_TX_DMA_STREAM
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#undef STM32_PWM_USE_TIM2
#define STM32_PWM_USE_TIM2 TRUE
#undef STM32_PWM_USE_TIM3
#define STM32_PWM_USE_TIM3 TRUE
#undef STM32_SPI_USE_SPI1
#define STM32_SPI_USE_SPI1 TRUE
#undef STM32_SPI_SPI1_RX_DMA_STREAM
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
#undef STM32_SPI_SPI1_TX_DMA_STREAM
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
#undef STM32_SERIAL_USE_USART1
#define STM32_SERIAL_USE_USART1 TRUE
// #undef STM32_SERIAL_USE_USART2
// #define STM32_SERIAL_USE_USART2 TRUE
// #undef STM32_UART_USART2_RX_DMA_STREAM
// #define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
// #undef STM32_UART_USART2_TX_DMA_STREAM
// #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#undef STM32_GPT_USE_TIM4
#define STM32_GPT_USE_TIM4 TRUE
#undef STM32_ST_USE_TIMER
#define STM32_ST_USE_TIMER 5

3
keyboards/bastardkb/charybdis/3x5/blackpill/readme.md Normal file
View File

@ -0,0 +1,3 @@
# Charybdis Nano (3x5) BlackPill
An ergonomic keyboard with integrated trackball, with BlackPill (STM32F411) mod.

41
keyboards/bastardkb/charybdis/3x5/blackpill/rules.mk Normal file
View File

@ -0,0 +1,41 @@
# MCU name
MCU = STM32F411
BOARD = BLACKPILL_STM32_F411
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
AUDIO_SUPPORTED = no # Audio is not supported
RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default
RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
# Charybdis nano is a split 3x5 keyboard with a maximum of 3 thumb keys (2 on
# the trackball side).
SPLIT_KEYBOARD = yes
LAYOUTS = split_3x5_3 # Support community layout, in particular Manna-Harbour's Miryoku layout
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
KEYBOARD_SHARED_EP = yes
EEPROM_DRIVER = spi
WS2812_DRIVER = pwm
SERIAL_DRIVER = usart
DEBOUNCE_TYPE = asym_eager_defer_pk

44
keyboards/bastardkb/charybdis/3x5/config.h
View File

@ -18,58 +18,24 @@
#pragma once
#define VENDOR_ID 0xA8F8
#define PRODUCT_ID 0x1832
#define DEVICE_VER 0x0001
#define MANUFACTURER Bastard Keyboards
#define PRODUCT Charybdis Nano
#include "config_common.h"
/* Key matrix configuration. */
// Rows are doubled-up.
#define MATRIX_ROWS 8
#define MATRIX_ROWS 8 // Rows are doubled-up.
#define MATRIX_COLS 5
// Wiring configuration for each half.
#define MATRIX_ROW_PINS \
{ B7, C6, D4, B5 }
#define MATRIX_COL_PINS \
{ C7, F0, D7, E6, B4 }
#define MATRIX_ROW_PINS_RIGHT \
{ F0, C6, D4, B5 }
#define MATRIX_COL_PINS_RIGHT \
{ C7, B7, D7, E6, B4 }
#define DIODE_DIRECTION ROW2COL
/* Handedness. */
#define MASTER_RIGHT
/* Bootmagic Lite configuration. */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
#define BOOTMAGIC_LITE_ROW_RIGHT 4
#define BOOTMAGIC_LITE_COLUMN_RIGHT 0
/* serial.c configuration (for split keyboard) */
#define SOFT_SERIAL_PIN D2
/* Set 0 if debouncing isn't needed. */
#define DEBOUNCE 5
/* PMW33XX settings. */
#define PMW33XX_CS_PIN B0
// Trackball angle adjustment.
/* Trackball angle adjustment. */
#define ROTATIONAL_TRANSFORM_ANGLE -25
/* RGB settings. */
#define RGB_DI_PIN D3
#define RGBLED_NUM 35
#define RGBLED_NUM 36
#define RGBLED_SPLIT \
{ 18, 17 }
{ 18, 18 }
/* RGB matrix support. */
#ifdef RGB_MATRIX_ENABLE

7
keyboards/bastardkb/charybdis/3x5/info.json
View File

@ -1,7 +1,8 @@
{
"keyboard_name": "Charybdis Nano",
"url": "https://www.bastardkb.com",
"maintainer": "Quentin Lebastard",
"url": "https://bastardkb.com/charybdis-nano",
"usb": {
"pid": "0x1832",
},
"layouts": {
"LAYOUT_charybdis_3x5": {
"layout": [

3
keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/README.md Normal file
View File

@ -0,0 +1,3 @@
# Charybdis (3x5) @bstiq keymap
Inspired from Miryoku, using home-rows.

166
keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/config.h Normal file
View File

@ -0,0 +1,166 @@
/**
* Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#ifdef VIA_ENABLE
/* Via configuration. */
# define DYNAMIC_KEYMAP_LAYER_COUNT 8
#endif // VIA_ENABLE
#ifndef __arm__
/* Disable unused features. */
# define NO_ACTION_ONESHOT
#endif // __arm__
/**
* Configure the global tapping term (default: 200ms).
* If you have a lot of accidental mod activations, crank up the tapping term.
*
* See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
*/
#ifndef TAPPING_TERM
# define TAPPING_TERM 160
#endif // TAPPING_TERM
/**
* Enable rapid switch from tap to hold. Disable auto-repeat when pressing key
* twice, except for one-shot keys.
*
* See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold
*/
#define TAPPING_FORCE_HOLD
/*
* Tap-or-Hold decision modes.
*
* Note that the following flags behave differently when combined (ie. when 2 or
* more are enabled).
*
* See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold
* decision modes.
*/
/**
* Faster tap-hold trigger.
*
* Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
* Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae
* With `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
* Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e
*
* See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold
*/
#define PERMISSIVE_HOLD
/**
* Prevent normal rollover on alphas from accidentally triggering mods.
*
* Ignores key presses that interrupt a mod-tap. Must-have for Home Row mod.
*
* Without `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
* Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ Mod+e
* With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
* Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ ae
*
* See docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt
*/
#define IGNORE_MOD_TAP_INTERRUPT
/** Charybdis-specific features. */
#ifdef POINTING_DEVICE_ENABLE
// Automatically enable the pointer layer when moving the trackball. See also:
// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS`
// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD`
// #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
// Flip horizontal direction for drag-scroll.
# define CHARYBDIS_DRAGSCROLL_REVERSE_X
// #define CHARYBDIS_DRAGSCROLL_REVERSE_Y
#endif // POINTING_DEVICE_ENABLE
/** RGB Matrix. */
#ifdef RGB_MATRIX_ENABLE
# ifdef __arm__
// Enable all animations on ARM boards since they have plenty of memory
// available for it.
# define ENABLE_RGB_MATRIX_ALPHAS_MODS
# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_BREATHING
# define ENABLE_RGB_MATRIX_BAND_SAT
# define ENABLE_RGB_MATRIX_BAND_VAL
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
# define ENABLE_RGB_MATRIX_CYCLE_ALL
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
# define ENABLE_RGB_MATRIX_DUAL_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
# define ENABLE_RGB_MATRIX_RAINDROPS
# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# define ENABLE_RGB_MATRIX_HUE_BREATHING
# define ENABLE_RGB_MATRIX_HUE_PENDULUM
# define ENABLE_RGB_MATRIX_HUE_WAVE
# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define ENABLE_RGB_MATRIX_SPLASH
# define ENABLE_RGB_MATRIX_MULTISPLASH
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# else
// Disable control of RGB matrix by keycodes (must use firmware implementation
// to control the feature).
# define RGB_MATRIX_DISABLE_KEYCODES
# endif
// Limit maximum brightness to keep power consumption reasonable, and avoid
// disconnects.
# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
// Rainbow swirl as startup mode.
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
// Slow swirl at startup.
# define RGB_MATRIX_STARTUP_SPD 32
// Startup values.
# define RGB_MATRIX_STARTUP_HUE 0
# define RGB_MATRIX_STARTUP_SAT 255
# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
#endif // RGB_MATRIX_ENABLE

224
keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/keymap.c Normal file
View File

@ -0,0 +1,224 @@
/**
* Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum charybdis_keymap_bstiq_layers {
LAYER_BASE = 0,
LAYER_MBO,
LAYER_MEDIA,
LAYER_NAV,
LAYER_MOUSE,
LAYER_SYM,
LAYER_NUM,
LAYER_FUN,
};
// Automatically enable sniping when the mouse layer is on.
#define CHARYBDIS_AUTO_SNIPING_ON_LAYER LAYER_MOUSE
#define BSP_NAV LT(LAYER_NAV, KC_BSPC)
#define ENT_MBO LT(LAYER_MBO, KC_ENT)
#define TAB_MED LT(LAYER_MEDIA, KC_TAB)
#define ESC_SYM LT(LAYER_SYM, KC_ESC)
#define SPC_NUM LT(LAYER_NUM, KC_SPC)
#define MOUSE(KC) LT(LAYER_MOUSE, KC)
#define USR_RDO KC_AGAIN
#define USR_PST S(KC_INS)
#define USR_CPY C(KC_INS)
#define USR_CUT S(KC_DEL)
#define USR_UND KC_UNDO
#define MS_L KC_MS_LEFT
#define MS_R KC_MS_RIGHT
#define MS_D KC_MS_DOWN
#define MS_U KC_MS_UP
#define WH_L KC_MS_WH_LEFT
#define WH_R KC_MS_WH_RIGHT
#define WH_D KC_MS_WH_DOWN
#define WH_U KC_MS_WH_UP
// clang-format off
/** Convenience macro. */
#define _KC_LAYOUT_wrapper( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \
...) \
KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, \
KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, \
KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, \
__VA_ARGS__
#define KC_LAYOUT_wrapper(...) _KC_LAYOUT_wrapper(__VA_ARGS__)
/** Base layer with BÉPO layout. */
#define LAYOUT_LAYER_BASE_BEPO KC_LAYOUT_wrapper( \
B, Z, P, O, QUOT, DOT, V, D, L, J, \
A, U, I, E, COMM, C, T, S, R, N, \
W, Y, X, SLSH, K, M, Q, G, H, F, \
BSP_NAV, ENT_MBO, TAB_MED, ESC_SYM, SPC_NUM)
/** Convenience key shorthands. */
#define U_NA KC_NO // Present but not available for use.
#define U_NU KC_NO // Available but not used.
/** Convenience row shorthands. */
#define __________________RESET_L__________________ QK_BOOT, U_NA, U_NA, U_NA, U_NA
#define __________________RESET_R__________________ U_NA, U_NA, U_NA, U_NA, QK_BOOT
#define ______________HOME_ROW_GASC_L______________ KC_LGUI, KC_LALT, KC_LSFT, KC_LCTL, U_NA
#define ______________HOME_ROW_ALGR_L______________ U_NA, KC_ALGR, U_NA, U_NA, U_NA
#define ______________HOME_ROW_GASC_R______________ U_NA, KC_LCTL, KC_LSFT, KC_LALT, KC_LGUI
#define ______________HOME_ROW_ALGR_R______________ U_NA, U_NA, U_NA, KC_ALGR, U_NA
/** Layers. */
// Buttons.
#define LAYOUT_LAYER_MBO \
__________________RESET_L__________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
______________HOME_ROW_GASC_L______________, KC_CAPS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, \
KC_BTN3, KC_ALGR, KC_BTN2, KC_BTN1, U_NA, KC_INS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, \
U_NA, U_NA, U_NA, KC_ENT, KC_DEL
// Media.
#define LAYOUT_LAYER_MEDIA \
__________________RESET_L__________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
______________HOME_ROW_GASC_L______________, U_NU, MS_L, MS_D, MS_U, MS_R, \
______________HOME_ROW_ALGR_L______________, U_NU, WH_L, WH_D, WH_U, WH_R, \
U_NA, U_NA, U_NA, KC_BTN1, KC_BTN3
// Navigation.
#define LAYOUT_LAYER_NAV \
__________________RESET_L__________________, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, \
______________HOME_ROW_GASC_L______________, U_NU, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, \
______________HOME_ROW_ALGR_L______________, U_NU, U_NU, U_NU, U_NU, U_NU, \
U_NA, U_NA, U_NA, KC_MSTP, KC_MPLY
// Mouse.
#define LAYOUT_LAYER_MOUSE \
S_D_MOD, USR_PST, USR_CPY, USR_CUT, USR_UND, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
DPI_MOD, DRGSCRL, KC_LSFT, KC_LCTL, _______, U_NU, MS_L, MS_D, MS_U, MS_R, \
USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, U_NU, WH_L, WH_D, WH_U, WH_R, \
KC_BTN2, KC_BTN1, KC_BTN3, KC_BTN1, KC_BTN3
// Symbols.
#define LAYOUT_LAYER_SYM \
KC_LCBR, KC_AMPR, KC_ASTR, KC_LPRN, KC_RCBR, __________________RESET_R__________________, \
KC_COLN, KC_DLR, KC_PERC, KC_CIRC, KC_PLUS, ______________HOME_ROW_GASC_R______________, \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_PIPE, ______________HOME_ROW_ALGR_R______________, \
KC_LPRN, KC_RPRN, KC_UNDS, U_NA, U_NA
// Numerals.
#define LAYOUT_LAYER_NUM \
KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, __________________RESET_R__________________, \
KC_SCLN, KC_4, KC_5, KC_6, KC_EQL, ______________HOME_ROW_GASC_R______________, \
KC_GRV, KC_1, KC_2, KC_3, KC_BSLS, ______________HOME_ROW_ALGR_R______________, \
KC_DOT, KC_0, KC_MINS, U_NA, U_NA
// Function keys.
#define LAYOUT_LAYER_FUN \
KC_F12, KC_F7, KC_F8, KC_F9, KC_PSCR, __________________RESET_R__________________, \
KC_F11, KC_F4, KC_F5, KC_F6, KC_SLCK, ______________HOME_ROW_GASC_R______________, \
KC_F10, KC_F1, KC_F2, KC_F3, KC_PAUS, ______________HOME_ROW_ALGR_R______________,\
KC_APP, KC_SPC, KC_TAB, U_NA, U_NA
/**
* Add Home Row mod to a layout.
*
* Expects a 10-key per row layout. Adds support for GASC (Gui, Alt, Shift, Ctl)
* home row. The layout passed in parameter must contain at least 20 keycodes.
*
* This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.:
*
* HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO)
*/
#define _HOME_ROW_MOD_GASC( \
L00, L01, L02, L03, L04, R05, R06, R07, R08, R09, \
L10, L11, L12, L13, L14, R15, R16, R17, R18, R19, \
...) \
L00, L01, L02, L03, L04, \
R05, R06, R07, R08, R09, \
LGUI_T(L10), LALT_T(L11), LSFT_T(L12), LCTL_T(L13), L14, \
R15, RCTL_T(R16), RSFT_T(R17), LALT_T(R18), RGUI_T(R19), \
__VA_ARGS__
#define HOME_ROW_MOD_GASC(...) _HOME_ROW_MOD_GASC(__VA_ARGS__)
/**
* Add mouse layer keys to a layout.
*
* Expects a 10-key per row layout. The layout passed in parameter must contain
* at least 30 keycodes.
*
* This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.:
*
* MOUSE_MOD(LAYOUT_LAYER_BASE_BEPO)
*/
#define _MOUSE_MOD( \
L00, L01, L02, L03, L04, R05, R06, R07, R08, R09, \
L10, L11, L12, L13, L14, R15, R16, R17, R18, R19, \
L20, L21, L22, L23, L24, R25, R26, R27, R28, R29, \
...) \
L00, L01, L02, L03, L04, \
R05, R06, R07, R08, R09, \
L10, L11, L12, L13, L14, \
R15, R16, R17, R18, R19, \
MOUSE(L20), L21, L22, L23, L24, \
R25, R26, R27, R28, MOUSE(R29), \
__VA_ARGS__
#define MOUSE_MOD(...) _MOUSE_MOD(__VA_ARGS__)
#define LAYOUT_wrapper(...) LAYOUT_charybdis_3x5(__VA_ARGS__)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[LAYER_BASE] = LAYOUT_wrapper(
MOUSE_MOD(HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO))
),
[LAYER_MBO] = LAYOUT_wrapper(LAYOUT_LAYER_MBO),
[LAYER_MEDIA] = LAYOUT_wrapper(LAYOUT_LAYER_MEDIA),
[LAYER_NAV] = LAYOUT_wrapper(LAYOUT_LAYER_NAV),
[LAYER_MOUSE] = LAYOUT_wrapper(LAYOUT_LAYER_MOUSE),
[LAYER_SYM] = LAYOUT_wrapper(LAYOUT_LAYER_SYM),
[LAYER_NUM] = LAYOUT_wrapper(LAYOUT_LAYER_NUM),
[LAYER_FUN] = LAYOUT_wrapper(LAYOUT_LAYER_FUN),
};
// clang-format on
#if defined(POINTING_DEVICE_ENABLE) && defined(CHARYBDIS_AUTO_SNIPING_ON_LAYER)
layer_state_t layer_state_set_kb(layer_state_t state) {
state = layer_state_set_user(state);
charybdis_set_pointer_sniping_enabled(layer_state_cmp(state, CHARYBDIS_AUTO_SNIPING_ON_LAYER));
return state;
}
#endif // POINTING_DEVICE_ENABLE && CHARYBDIS_AUTO_SNIPING_ON_LAYER
#ifdef RGB_MATRIX_ENABLE
// Forward-declare this helper function since it is defined in rgb_matrix.c.
void rgb_matrix_update_pwm_buffers(void);
#endif
void shutdown_user(void) {
#ifdef RGBLIGHT_ENABLE
rgblight_enable_noeeprom();
rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
rgblight_setrgb_red();
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
rgb_matrix_set_color_all(RGB_RED);
rgb_matrix_update_pwm_buffers();
#endif // RGB_MATRIX_ENABLE
}

10
keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/rules.mk Normal file
View File

@ -0,0 +1,10 @@
ifeq ($(MCU),atmega32u4)
# Space saving settings.
TAP_DANCE_ENABLE = no
COMBO_ENABLE = no
QMK_SETTINGS = no
else ifeq ($(MCU),STM32F411)
EEPROM_DRIVER = vendor
endif
VIA_ENABLE = yes

4
keyboards/bastardkb/charybdis/3x5/keymaps/default/keymap.c
View File

@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX, KC_PPLS, KC_4, KC_5, KC_6, KC_PMNS,
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, KC_PAST, KC_1, KC_2, KC_3, KC_PSLS,
XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, KC_PAST, KC_1, KC_2, KC_3, KC_PSLS,
// ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
XXXXXXX, XXXXXXX, _______, XXXXXXX, _______
// ╰───────────────────────────╯ ╰──────────────────╯
@ -61,7 +61,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_RSFT, KC_RCTL, KC_RALT, KC_RGUI,
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
KC_HOME, KC_PGUP, KC_PGDN, KC_END, XXXXXXX, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX,
KC_HOME, KC_PGUP, KC_PGDN, KC_END, XXXXXXX, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX,
// ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
_______, _______, XXXXXXX, _______, XXXXXXX
// ╰───────────────────────────╯ ╰──────────────────╯

13
keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h
View File

@ -19,7 +19,7 @@
#ifdef VIA_ENABLE
/* VIA configuration. */
# define DYNAMIC_KEYMAP_LAYER_COUNT 7
#endif // VIA_ENABLE
#endif // VIA_ENABLE
/* Disable unused features. */
#define NO_ACTION_ONESHOT
@ -33,7 +33,7 @@
* See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
*/
# define TAPPING_TERM 200
#endif // TAPPING_TERM
#endif // TAPPING_TERM
/**
* \brief Enable rapid switch from tap to hold.
@ -84,16 +84,11 @@
/* Charybdis-specific features. */
#ifdef POINTING_DEVICE_ENABLE
// Enable pointer acceleration, which increases the speed by ~2x for large
// displacement, while maintaining 1x speed for slow movements. See also:
// - `CHARYBDIS_POINTER_ACCELERATION_FACTOR`
# define CHARYBDIS_POINTER_ACCELERATION_ENABLE
// Automatically enable the pointer layer when moving the trackball. See also:
// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS`
// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD`
// #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
#endif // POINTING_DEVICE_ENABLE
#endif // POINTING_DEVICE_ENABLE
/* RGB Matrix. */
@ -115,4 +110,4 @@
# define RGB_MATRIX_STARTUP_SAT 255
# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
#endif // RGB_MATRIX_ENABLE
#endif // RGB_MATRIX_ENABLE

42
keyboards/bastardkb/charybdis/3x5/keymaps/via/keymap.c
View File

@ -18,7 +18,7 @@
#ifdef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
# include "timer.h"
#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
enum charybdis_keymap_layers {
LAYER_BASE = 0,
@ -38,12 +38,12 @@ static uint16_t auto_pointer_layer_timer = 0;
# ifndef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
# define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS 1000
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
# ifndef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
# define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD 8
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
#define ESC_MED LT(LAYER_MEDIA, KC_ESC)
#define SPC_NAV LT(LAYER_NAVIGATION, KC_SPC)
@ -52,6 +52,13 @@ static uint16_t auto_pointer_layer_timer = 0;
#define BSP_NUM LT(LAYER_NUMERAL, KC_BSPC)
#define _L_PTR(KC) LT(LAYER_POINTER, KC)
#ifndef POINTING_DEVICE_ENABLE
# define DRGSCRL KC_NO
# define DPI_MOD KC_NO
# define S_D_MOD KC_NO
# define SNIPING KC_NO
#endif // !POINTING_DEVICE_ENABLE
// clang-format off
/** \brief QWERTY layout (3 rows, 10 columns). */
#define LAYOUT_LAYER_BASE \
@ -98,14 +105,14 @@ static uint16_t auto_pointer_layer_timer = 0;
#define LAYOUT_LAYER_MEDIA \
XXXXXXX,RGB_RMOD, RGB_TOG, RGB_MOD, XXXXXXX, XXXXXXX,RGB_RMOD, RGB_TOG, RGB_MOD, XXXXXXX, \
KC_MPRV, KC_VOLD, KC_MUTE, KC_VOLU, KC_MNXT, KC_MPRV, KC_VOLD, KC_MUTE, KC_VOLU, KC_MNXT, \
XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX, \
XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX, \
_______, KC_MPLY, KC_MSTP, KC_MSTP, KC_MPLY
/** \brief Mouse emulation and pointer functions. */
#define LAYOUT_LAYER_POINTER \
XXXXXXX, XXXXXXX, XXXXXXX, DPI_MOD, S_D_MOD, S_D_MOD, DPI_MOD, XXXXXXX, XXXXXXX, XXXXXXX, \
______________HOME_ROW_GACS_L______________, ______________HOME_ROW_GACS_R______________, \
_______, DRGSCRL, SNIPING, EEP_RST, QK_BOOT, QK_BOOT, EEP_RST, SNIPING, DRGSCRL, _______, \
_______, DRGSCRL, SNIPING, EEP_RST, QK_BOOT, QK_BOOT, EEP_RST, SNIPING, DRGSCRL, _______, \
KC_BTN2, KC_BTN1, KC_BTN3, KC_BTN3, KC_BTN1
/**
@ -217,36 +224,35 @@ report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) {
# ifdef RGB_MATRIX_ENABLE
rgb_matrix_mode_noeeprom(RGB_MATRIX_NONE);
rgb_matrix_sethsv_noeeprom(HSV_GREEN);
# endif // RGB_MATRIX_ENABLE
# endif // RGB_MATRIX_ENABLE
}
auto_pointer_layer_timer = timer_read();
}
return mouse_report;
}
void matrix_scan_kb(void) {
void matrix_scan_user(void) {
if (auto_pointer_layer_timer != 0 && TIMER_DIFF_16(timer_read(), auto_pointer_layer_timer) >= CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS) {
auto_pointer_layer_timer = 0;
layer_off(LAYER_POINTER);
# ifdef RGB_MATRIX_ENABLE
rgb_matrix_mode_noeeprom(RGB_MATRIX_STARTUP_MODE);
# endif // RGB_MATRIX_ENABLE
# endif // RGB_MATRIX_ENABLE
}
matrix_scan_user();
}
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
# ifdef CHARYBDIS_AUTO_SNIPING_ON_LAYER
layer_state_t layer_state_set_kb(layer_state_t state) {
state = layer_state_set_user(state);
layer_state_t layer_state_set_user(layer_state_t state) {
charybdis_set_pointer_sniping_enabled(layer_state_cmp(state, CHARYBDIS_AUTO_SNIPING_ON_LAYER));
return state;
}
# endif // CHARYBDIS_AUTO_SNIPING_ON_LAYER
#endif // POINTING_DEVICE_ENABLE
# endif // CHARYBDIS_AUTO_SNIPING_ON_LAYER
#endif // POINTING_DEVICE_ENABLE
#ifdef RGB_MATRIX_ENABLE
// Forward-declare this helper function since it is defined in rgb_matrix.c.
// Forward-declare this helper function since it is defined in
// rgb_matrix.c.
void rgb_matrix_update_pwm_buffers(void);
#endif
@ -255,9 +261,9 @@ void shutdown_user(void) {
rgblight_enable_noeeprom();
rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
rgblight_setrgb_red();
#endif // RGBLIGHT_ENABLE
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
rgb_matrix_set_color_all(RGB_RED);
rgb_matrix_update_pwm_buffers();
#endif // RGB_MATRIX_ENABLE
#endif // RGB_MATRIX_ENABLE
}

42
keyboards/bastardkb/charybdis/3x5/v1/elitec/config.h Normal file
View File

@ -0,0 +1,42 @@
/*
* Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna)
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ B7, C6, D4, B5 }
#define MATRIX_COL_PINS \
{ C7, F0, D7, E6, B4 }
#define MATRIX_ROW_PINS_RIGHT \
{ F0, C6, D4, B5 }
#define MATRIX_COL_PINS_RIGHT \
{ C7, B7, D7, E6, B4 }
/* Handedness. */
#define MASTER_RIGHT
/* serial.c configuration (for split keyboard). */
#define SOFT_SERIAL_PIN D2
/* RGB settings. */
#define RGB_DI_PIN D3
/* PMW3360 settings. */
#define PMW33XX_CS_PIN B0

6
keyboards/bastardkb/charybdis/3x5/v1/elitec/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis Nano (3x5) Elite-C",
"usb": {
"device_version": "1.0.0",
},
}

9
keyboards/bastardkb/charybdis/3x5/rules.mk → keyboards/bastardkb/charybdis/3x5/v1/elitec/rules.mk
View File

@ -23,10 +23,6 @@ RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by def
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
# Enable link-time optimization by default. The Charybdis packs a lot of
# features (RGB, Via, trackball) in a small atmega32u4 package.
LTO_ENABLE = yes
# Charybdis nano is a split 3x5 keyboard with a maximum of 3 thumb keys (2 on
# the trackball side).
SPLIT_KEYBOARD = yes
@ -34,5 +30,8 @@ LAYOUTS = split_3x5_3 # Support community layout, in particular Manna-Harbour's
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
# https://qmk.fm/changes/2018-11-16-use-a-single-endpoint-for-hid-reports
MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
# Enable link-time optimization by default. The Charybdis packs a lot of
# features (RGB, Via, trackball) in a small atmega32u4 package.
LTO_ENABLE = yes

36
keyboards/bastardkb/charybdis/3x5/v2/elitec/config.h Normal file
View File

@ -0,0 +1,36 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ F7, C6, D4, B5 }
#define MATRIX_COL_PINS \
{ F5, B6, D7, E6, B4 }
/* Handedness. */
#define MASTER_RIGHT
/* serial.c configuration (for split keyboard). */
#define SOFT_SERIAL_PIN D2
/* RGB settings. */
#define RGB_DI_PIN D3
/* PMW3360 settings. */
#define PMW33XX_CS_PIN F0

6
keyboards/bastardkb/charybdis/3x5/v2/elitec/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis Nano (3x5) Elite-C",
"usb": {
"device_version": "2.0.0",
},
}

37
keyboards/bastardkb/charybdis/3x5/v2/elitec/rules.mk Normal file
View File

@ -0,0 +1,37 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
AUDIO_SUPPORTED = no # Audio is not supported
RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default
RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
# Charybdis nano is a split 3x5 keyboard with a maximum of 3 thumb keys (2 on
# the trackball side).
SPLIT_KEYBOARD = yes
LAYOUTS = split_3x5_3 # Support community layout, in particular Manna-Harbour's Miryoku layout
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
# Enable link-time optimization by default. The Charybdis packs a lot of
# features (RGB, Via, trackball) in a small atmega32u4 package.
LTO_ENABLE = yes

50
keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h Normal file
View File

@ -0,0 +1,50 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ GP26, GP5, GP4, GP9 }
#define MATRIX_COL_PINS \
{ GP28, GP15, GP6, GP7, GP8 }
/* Handedness. */
#define MASTER_RIGHT
// To use the handedness pin, resistors need to be installed on the adapter PCB.
// If so, uncomment the following code, and undefine MASTER_RIGHT above.
// #define SPLIT_HAND_PIN GP13
// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
/* serial.c configuration (for split keyboard). */
#define SOFT_SERIAL_PIN GP1
/* RGB settings. */
#define RGB_DI_PIN GP0
/* SPI & PMW3360 settings. */
#define SPI_DRIVER SPID0
#define SPI_SCK_PIN GP18
#define SPI_MOSI_PIN GP19
#define SPI_MISO_PIN GP20
#define PMW33XX_CS_PIN GP14
/* Reset. */
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

6
keyboards/bastardkb/charybdis/3x5/v2/splinky/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis Nano (3x5) Splinky",
"usb": {
"device_version": "2.0.0",
},
}

23
keyboards/bastardkb/charybdis/3x5/v2/splinky/mcuconf.h Normal file
View File

@ -0,0 +1,23 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include_next "mcuconf.h"
#undef RP_SPI_USE_SPI0
#define RP_SPI_USE_SPI0 TRUE

37
keyboards/bastardkb/charybdis/3x5/v2/splinky/rules.mk Normal file
View File

@ -0,0 +1,37 @@
# MCU name
MCU = RP2040
# Bootloader selection
BOOTLOADER = rp2040
# RP2040-specific options
ALLOW_WARNINGS = yes
PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
AUDIO_SUPPORTED = no # Audio is not supported
RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default
RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
SPLIT_KEYBOARD = yes
LAYOUTS = split_3x5_3
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
SERIAL_DRIVER = vendor
WS2812_DRIVER = vendor

91
keyboards/bastardkb/charybdis/3x6/3x6.c Normal file
View File

@ -0,0 +1,91 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Publicw License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "3x6.h"
// clang-format off
#ifdef RGB_MATRIX_ENABLE
/**
* \brief LEDs index.
*
# 0,0 14 28 42 56 70 84 98 126 140 154 168 182 196 210 224,0
# 0,0 15 30 45 60 75 90 105 119 134 149 164 179 194 209 224,0
* ╭────────────────────────╮ ╭────────────────────────╮
* 0 5 6 11 12 15 36 33 32 27 26 21
* ├────────────────────────┤ ├────────────────────────┤
* 1 4 7 10 13 16 37 34 31 28 25 22
* ├────────────────────────┤ ├────────────────────────┤
* 2 3 8 9 14 17 38 35 30 29 24 23
* ╰────────────────────────╯ ╰────────────────────────╯
* 18 19 20 39 40 XX
* ╰────────────╯ ╰────────────╯
*
* Note: the LED config simulates 42 LEDs instead of the actual 41 to prevent
* confusion when testing LEDs during assembly when handedness is not set
* correctly. Those fake LEDs are bound to the physical top-left corner.
*/
led_config_t g_led_config = { {
/* Key Matrix to LED index. */
// Left split.
{ 0, 5, 6, 11, 12, 15 }, // Top row
{ 1, 4, 7, 10, 13, 16 }, // Middle row
{ 2, 3, 8, 9, 14, 17 }, // Bottom row
{ NO_LED, 20, NO_LED, 18, 19, NO_LED }, // Thumb cluster
// Right split.
{ 21, 26, 27, 32, 33, 36 }, // Top row
{ 22, 25, 28, 31, 34, 37 }, // Middle row
{ 23, 24, 29, 30, 35, 38 }, // Bottom row
{ NO_LED, 41, NO_LED, 39, 40, NO_LED }, // Thumb cluster
}, {
/* LED index to physical position. */
// Left split.
/* index=0 */ { 0, 0 }, { 0, 21 }, { 0, 42 }, // col 1 (left most)
/* index=3 */ { 15, 42 }, { 15, 21 }, { 15, 0 }, // col 2
/* index=6 */ { 30, 0 }, { 30, 21 }, { 30, 42 },
/* index=9 */ { 45, 42 }, { 45, 21 }, { 45, 0 },
/* index=12 */ { 60, 0 }, { 60, 21 }, { 60, 42 },
/* index=15 */ { 75, 0 }, { 75, 21 }, { 75, 42 },
/* index=18 */ { 75, 64 }, { 90, 64 }, { 105, 64 }, // Thumb cluster
// Right split.
/* index=21 */ { 224, 0 }, { 224, 21 }, { 224, 42 }, // col 12 (right most)
/* index=24 */ { 209, 42 }, { 209, 21 }, { 209, 0 }, // col 10
/* index=27 */ { 194, 0 }, { 194, 21 }, { 194, 42 },
/* index=30 */ { 179, 42 }, { 179, 21 }, { 179, 0 },
/* index=33 */ { 164, 0 }, { 164, 21 }, { 164, 42 },
/* index=36 */ { 149, 0 }, { 149, 21 }, { 149, 42 },
/* index=39 */ { 119, 64 }, { 134, 64 }, { 0, 0 }, // Thumb cluster
}, {
/* LED index to flag. */
// Left split.
/* index=0 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // col 1
/* index=3 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // col 2
/* index=6 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=9 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=12 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=15 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=18 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // Thumb cluster
// Right split.
/* index=21 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // col 10
/* index=24 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // col 9
/* index=27 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=30 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=33 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=36 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=39 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // Thumb cluster
} };
#endif
// clang-format on

62
keyboards/bastardkb/charybdis/3x6/3x6.h Normal file
View File

@ -0,0 +1,62 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "charybdis.h"
// clang-format off
#define LAYOUT_charybdis_3x6( \
k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \
k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \
k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \
k33, k34, k31, k71, k73 \
) \
{ \
{ k00, k01, k02, k03, k04, k05 }, \
{ k10, k11, k12, k13, k14, k15 }, \
{ k20, k21, k22, k23, k24, k25 }, \
{ KC_NO, k31, KC_NO, k33, k34, KC_NO }, \
{ k40, k41, k42, k43, k44, k45 }, \
{ k50, k51, k52, k53, k54, k55 }, \
{ k60, k61, k62, k63, k64, k65 }, \
{ KC_NO, k71, KC_NO, k73, KC_NO, KC_NO }, \
}
/**
* \brief Compatibility layout with the split_3x5_6 community layout.
*
* This effectively renders the Charbdis Nano compatible with existing layout
* implementations relying on the `split_3x6_3` layout.
*/
#define LAYOUT_split_3x6_3( \
k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \
k10, k11, k12, k13, k14, k15, k55, k54, k53, k52, k51, k50, \
k20, k21, k22, k23, k24, k25, k65, k64, k63, k62, k61, k60, \
k33, k34, k31, k71, k73, ___ \
) \
{ \
{ k00, k01, k02, k03, k04, k05 }, \
{ k10, k11, k12, k13, k14, k15 }, \
{ k20, k21, k22, k23, k24, k25 }, \
{ KC_NO, k31, KC_NO, k33, k34, KC_NO }, \
{ k40, k41, k42, k43, k44, k45 }, \
{ k50, k51, k52, k53, k54, k55 }, \
{ k60, k61, k62, k63, k64, k65 }, \
{ KC_NO, k71, KC_NO, k73, KC_NO, KC_NO }, \
}
// clang-format on

60
keyboards/bastardkb/charybdis/3x6/blackpill/config.h Normal file
View File

@ -0,0 +1,60 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Publicw License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ A2, B8, A8, B9 }
#define MATRIX_COL_PINS \
{ B0, B1, B10, B3, B4, B5 }
/* Handedness. */
#define SPLIT_HAND_PIN A3 // High -> left, Low -> right.
/* RGB settings. */
#define RGB_DI_PIN A1
#define WS2812_PWM_DRIVER PWMD2
#define WS2812_PWM_CHANNEL 2
#define WS2812_PWM_PAL_MODE 1
#define WS2812_EXTERNAL_PULLUP
#define WS2812_DMA_STREAM STM32_DMA1_STREAM1
#define WS2812_DMA_CHANNEL 3
#define WS2812_PWM_TARGET_PERIOD 800000
/* Serial configuration for split keyboard. */
#define SERIAL_USART_TX_PIN A9
/* CRC. */
#define CRC8_USE_TABLE
#define CRC8_OPTIMIZE_SPEED
/* SPI config for EEPROM and pmw3360 sensor. */
#define SPI_DRIVER SPID1
#define SPI_SCK_PIN A5
#define SPI_SCK_PAL_MODE 5
#define SPI_MOSI_PIN A7
#define SPI_MOSI_PAL_MODE 5
#define SPI_MISO_PIN A6
#define SPI_MISO_PAL_MODE 5
/* EEPROM config. */
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
/* PMW3360 settings. */
#define PMW33XX_CS_PIN B14
#define PMW33XX_CS_DIVISOR 64

26
keyboards/bastardkb/charybdis/3x6/blackpill/halconf.h Normal file
View File

@ -0,0 +1,26 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define HAL_USE_PWM TRUE
#define HAL_USE_SERIAL TRUE
#define HAL_USE_SPI TRUE
#define SPI_USE_WAIT TRUE
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
#include_next "halconf.h"

6
keyboards/bastardkb/charybdis/3x6/blackpill/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis Mini (3x6) Blackpill",
"usb": {
"device_version": "1.0.0",
},
}

43
keyboards/bastardkb/charybdis/3x6/blackpill/mcuconf.h Normal file
View File

@ -0,0 +1,43 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include_next "mcuconf.h"
#undef STM32_PWM_USE_TIM2
#define STM32_PWM_USE_TIM2 TRUE
#undef STM32_PWM_USE_TIM3
#define STM32_PWM_USE_TIM3 TRUE
#undef STM32_SPI_USE_SPI1
#define STM32_SPI_USE_SPI1 TRUE
#undef STM32_SPI_SPI1_RX_DMA_STREAM
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
#undef STM32_SPI_SPI1_TX_DMA_STREAM
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
#undef STM32_SERIAL_USE_USART1
#define STM32_SERIAL_USE_USART1 TRUE
#undef STM32_GPT_USE_TIM4
#define STM32_GPT_USE_TIM4 TRUE
#undef STM32_ST_USE_TIMER
#define STM32_ST_USE_TIMER 5

3
keyboards/bastardkb/charybdis/3x6/blackpill/readme.md Normal file
View File

@ -0,0 +1,3 @@
# Charybdis Mini (3x6) BlackPill
An ergonomic keyboard with integrated trackball, with BlackPill (STM32F411) mod.

39
keyboards/bastardkb/charybdis/3x6/blackpill/rules.mk Normal file
View File

@ -0,0 +1,39 @@
# MCU name
MCU = STM32F411
BOARD = BLACKPILL_STM32_F411
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
AUDIO_SUPPORTED = no # Audio is not supported
RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default
RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
SPLIT_KEYBOARD = yes
LAYOUTS = split_3x6_3
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
KEYBOARD_SHARED_EP = yes
EEPROM_DRIVER = spi
WS2812_DRIVER = pwm
SERIAL_DRIVER = usart
DEBOUNCE_TYPE = asym_eager_defer_pk

49
keyboards/bastardkb/charybdis/3x6/config.h Normal file
View File

@ -0,0 +1,49 @@
/*
* Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* Key matrix configuration. */
#define MATRIX_ROWS 8 // Rows are doubled-up.
#define MATRIX_COLS 6
#define DIODE_DIRECTION ROW2COL
/* Set 0 if debouncing isn't needed. */
#define DEBOUNCE 5
/* Trackball angle adjustment. */
#define ROTATIONAL_TRANSFORM_ANGLE -25
/* RGB settings. */
#define RGBLED_NUM 42
#define RGBLED_SPLIT \
{ 21, 21 }
/* RGB matrix support. */
#ifdef RGB_MATRIX_ENABLE
# define SPLIT_TRANSPORT_MIRROR
# define DRIVER_LED_TOTAL RGBLED_NUM
# define RGB_MATRIX_SPLIT RGBLED_SPLIT
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_DISABLE_WHEN_USB_SUSPENDED
# define RGB_MATRIX_KEYPRESSES
#endif

99
keyboards/bastardkb/charybdis/3x6/info.json Normal file
View File

@ -0,0 +1,99 @@
{
"url": "https://bastardkb.com",
"usb": {
"pid": "0x1834",
},
"layouts": {
"LAYOUT_charybdis_3x6": {
"layout": [
{"label":"L00", "x":0, "y":0},
{"label":"L01", "x":1, "y":0},
{"label":"L02", "x":2, "y":0},
{"label":"L03", "x":3, "y":0},
{"label":"L04", "x":4, "y":0},
{"label":"L05", "x":5, "y":0},
{"label":"R00", "x":11, "y":0},
{"label":"R01", "x":12, "y":0},
{"label":"R02", "x":13, "y":0},
{"label":"R03", "x":14, "y":0},
{"label":"R04", "x":15, "y":0},
{"label":"R05", "x":16, "y":0},
{"label":"L10", "x":0, "y":1},
{"label":"L11", "x":1, "y":1},
{"label":"L12", "x":2, "y":1},
{"label":"L13", "x":3, "y":1},
{"label":"L14", "x":4, "y":1},
{"label":"L15", "x":5, "y":1},
{"label":"R10", "x":11, "y":1},
{"label":"R11", "x":12, "y":1},
{"label":"R12", "x":13, "y":1},
{"label":"R13", "x":14, "y":1},
{"label":"R14", "x":15, "y":1},
{"label":"R15", "x":16, "y":1},
{"label":"L20", "x":0, "y":2},
{"label":"L21", "x":1, "y":2},
{"label":"L22", "x":2, "y":2},
{"label":"L23", "x":3, "y":2},
{"label":"L24", "x":4, "y":2},
{"label":"L25", "x":5, "y":2},
{"label":"R20", "x":11, "y":2},
{"label":"R21", "x":12, "y":2},
{"label":"R22", "x":13, "y":2},
{"label":"R23", "x":14, "y":2},
{"label":"R24", "x":15, "y":2},
{"label":"R25", "x":16, "y":2},
{"label":"L33", "x":5, "y":3},
{"label":"L34", "x":6, "y":3},
{"label":"L31", "x":7, "y":3},
{"label":"R31", "x":9, "y":3},
{"label":"R33", "x":10, "y":3}
]
},
"LAYOUT_split_3x6_3": {
"layout": [
{"label":"L00", "x":0, "y":0},
{"label":"L01", "x":1, "y":0},
{"label":"L02", "x":2, "y":0},
{"label":"L03", "x":3, "y":0},
{"label":"L04", "x":4, "y":0},
{"label":"L05", "x":5, "y":0},
{"label":"R00", "x":11, "y":0},
{"label":"R01", "x":12, "y":0},
{"label":"R02", "x":13, "y":0},
{"label":"R03", "x":14, "y":0},
{"label":"R04", "x":15, "y":0},
{"label":"R05", "x":16, "y":0},
{"label":"L10", "x":0, "y":1},
{"label":"L11", "x":1, "y":1},
{"label":"L12", "x":2, "y":1},
{"label":"L13", "x":3, "y":1},
{"label":"L14", "x":4, "y":1},
{"label":"L15", "x":5, "y":1},
{"label":"R10", "x":11, "y":1},
{"label":"R11", "x":12, "y":1},
{"label":"R12", "x":13, "y":1},
{"label":"R13", "x":14, "y":1},
{"label":"R14", "x":15, "y":1},
{"label":"R15", "x":16, "y":1},
{"label":"L20", "x":0, "y":2},
{"label":"L21", "x":1, "y":2},
{"label":"L22", "x":2, "y":2},
{"label":"L23", "x":3, "y":2},
{"label":"L24", "x":4, "y":2},
{"label":"L25", "x":5, "y":2},
{"label":"R20", "x":11, "y":2},
{"label":"R21", "x":12, "y":2},
{"label":"R22", "x":13, "y":2},
{"label":"R23", "x":14, "y":2},
{"label":"R24", "x":15, "y":2},
{"label":"R25", "x":16, "y":2},
{"label":"L33", "x":5, "y":3},
{"label":"L34", "x":6, "y":3},
{"label":"L31", "x":7, "y":3},
{"label":"R33", "x":9, "y":3},
{"label":"R34", "x":10, "y":3},
{"label":"R31", "x":11, "y":3}
]
}
}
}

54
keyboards/bastardkb/charybdis/3x6/keymaps/default/config.h Normal file
View File

@ -0,0 +1,54 @@
/**
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#ifndef TAPPING_TERM
/**
* \brief Configure the global tapping term (default: 200ms).
*
* If you have a lot of accidental mod activations, crank up the tapping term.
*
* See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
*/
# define TAPPING_TERM 200
#endif // TAPPING_TERM
/* RGB Matrix. */
#ifdef RGB_MATRIX_ENABLE
// Disable control of RGB matrix by keycodes (must use firmware implementation
// to control the feature).
# define RGB_MATRIX_DISABLE_KEYCODES
// Limit maximum brightness to keep power consumption reasonable, and avoid
// disconnects.
# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
// Rainbow swirl as startup mode.
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
// Slow swirl at startup.
# define RGB_MATRIX_STARTUP_SPD 32
// Startup values.
# define RGB_MATRIX_STARTUP_HUE 0
# define RGB_MATRIX_STARTUP_SAT 255
# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
#endif // RGB_MATRIX_ENABLE

66
keyboards/bastardkb/charybdis/3x6/keymaps/default/keymap.c Normal file
View File

@ -0,0 +1,66 @@
/**
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum charybdis_keymap_layers {
LAYER_BASE = 0,
LAYER_LOWER,
LAYER_RAISE,
};
#define LOWER MO(LAYER_LOWER)
#define RAISE MO(LAYER_RAISE)
// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[LAYER_BASE] = LAYOUT_charybdis_3x6(
// ╭──────────────────────────────────────────────────────╮ ╭──────────────────────────────────────────────────────╮
KC_LGUI, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RGUI,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_RCTL,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
// ╰──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────╯
KC_BSPC, KC_SPC, LOWER, RAISE, KC_ENT
// ╰───────────────────────────╯ ╰──────────────────╯
),
[LAYER_LOWER] = LAYOUT_charybdis_3x6(
// ╭──────────────────────────────────────────────────────╮ ╭──────────────────────────────────────────────────────╮
XXXXXXX, RGB_TOG, KC_MNXT, KC_MPLY, KC_MPRV, XXXXXXX, KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, XXXXXXX,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX, KC_PPLS, KC_4, KC_5, KC_6, KC_PMNS, XXXXXXX,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, KC_PAST, KC_1, KC_2, KC_3, KC_PSLS, XXXXXXX,
// ╰──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────╯
XXXXXXX, XXXXXXX, _______, XXXXXXX, _______
// ╰───────────────────────────╯ ╰──────────────────╯
),
[LAYER_RAISE] = LAYOUT_charybdis_3x6(
// ╭──────────────────────────────────────────────────────╮ ╭──────────────────────────────────────────────────────╮
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU, KC_MUTE, KC_VOLD, XXXXXXX, XXXXXXX,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_RSFT, KC_RCTL, KC_RALT, KC_RGUI, XXXXXXX,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, KC_HOME, KC_PGUP, KC_PGDN, KC_END, XXXXXXX, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
// ╰──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────╯
_______, _______, XXXXXXX, _______, XXXXXXX
// ╰───────────────────────────╯ ╰──────────────────╯
),
};
// clang-format on

7
keyboards/bastardkb/charybdis/3x6/keymaps/default/readme.md Normal file
View File

@ -0,0 +1,7 @@
# Charybdis Mini (3x6) default keymap
> :bulb: Have a look at the [`via` keymap](../via) for a more feature-rich layout.
The Charydbis Mini (3x6) default keymap is inspired from the original [Dactyl Manuform](../../../../../handwired/dactyl_manuform) default keymap.
This layout supports RGB matrix. However, due to space constraints on the MCU, only a limited number of effect can be enabled at once. Look at the `config.h` file and enable your favorite effect.

71
keyboards/bastardkb/charybdis/3x6/keymaps/via/config.h Normal file
View File

@ -0,0 +1,71 @@
/**
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#ifdef VIA_ENABLE
/* VIA configuration. */
# define DYNAMIC_KEYMAP_LAYER_COUNT 4
#endif // VIA_ENABLE
/* Disable unused features. */
#define NO_ACTION_ONESHOT
#ifndef TAPPING_TERM
/**
* \brief Configure the global tapping term (default: 200ms).
*
* If you have a lot of accidental mod activations, crank up the tapping term.
*
* See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
*/
# define TAPPING_TERM 200
#endif // TAPPING_TERM
/* Charybdis-specific features. */
#ifdef POINTING_DEVICE_ENABLE
// Automatically enable the pointer layer when moving the trackball. See also:
// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS`
// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD`
// #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
#endif // POINTING_DEVICE_ENABLE
/* RGB Matrix. */
#ifdef RGB_MATRIX_ENABLE
// Disable control of RGB matrix by keycodes (must use firmware implementation
// to control the feature).
# define RGB_MATRIX_DISABLE_KEYCODES
// Limit maximum brightness to keep power consumption reasonable, and avoid
// disconnects.
# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
// Rainbow swirl as startup mode.
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
// Slow swirl at startup.
# define RGB_MATRIX_STARTUP_SPD 32
// Startup values.
# define RGB_MATRIX_STARTUP_HUE 0
# define RGB_MATRIX_STARTUP_SAT 255
# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
#endif // RGB_MATRIX_ENABLE

148
keyboards/bastardkb/charybdis/3x6/keymaps/via/keymap.c Normal file
View File

@ -0,0 +1,148 @@
/**
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum charybdis_keymap_layers {
LAYER_BASE = 0,
LAYER_LOWER,
LAYER_RAISE,
LAYER_POINTER,
};
/** \brief Automatically enable sniping-mode on the pointer layer. */
#define CHARYBDIS_AUTO_SNIPING_ON_LAYER LAYER_POINTER
#ifdef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
static uint16_t auto_pointer_layer_timer = 0;
# ifndef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
# define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS 1000
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
# ifndef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
# define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD 8
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
#define LOWER MO(LAYER_LOWER)
#define RAISE MO(LAYER_RAISE)
#define PT_Z LT(LAYER_POINTER, KC_Z)
#define PT_SLSH LT(LAYER_POINTER, KC_SLSH)
// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[LAYER_BASE] = LAYOUT_charybdis_3x6(
// ╭──────────────────────────────────────────────────────╮ ╭──────────────────────────────────────────────────────╮
KC_LGUI, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RGUI,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_RCTL,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
// ╰──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────╯
KC_BSPC, KC_SPC, LOWER, RAISE, KC_ENT
// ╰───────────────────────────╯ ╰──────────────────╯
),
[LAYER_LOWER] = LAYOUT_charybdis_3x6(
// ╭──────────────────────────────────────────────────────╮ ╭──────────────────────────────────────────────────────╮
XXXXXXX, RGB_TOG, KC_MNXT, KC_MPLY, KC_MPRV, XXXXXXX, KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, XXXXXXX,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX, KC_PPLS, KC_4, KC_5, KC_6, KC_PMNS, XXXXXXX,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, KC_PAST, KC_1, KC_2, KC_3, KC_PSLS, XXXXXXX,
// ╰──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────╯
XXXXXXX, XXXXXXX, _______, XXXXXXX, _______
// ╰───────────────────────────╯ ╰──────────────────╯
),
[LAYER_RAISE] = LAYOUT_charybdis_3x6(
// ╭──────────────────────────────────────────────────────╮ ╭──────────────────────────────────────────────────────╮
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU, KC_MUTE, KC_VOLD, XXXXXXX, XXXXXXX,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_RSFT, KC_RCTL, KC_RALT, KC_RGUI, XXXXXXX,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, KC_HOME, KC_PGUP, KC_PGDN, KC_END, XXXXXXX, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
// ╰──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────╯
_______, _______, XXXXXXX, _______, XXXXXXX
// ╰───────────────────────────╯ ╰──────────────────╯
),
[LAYER_POINTER] = LAYOUT_charybdis_3x6(
// ╭──────────────────────────────────────────────────────╮ ╭──────────────────────────────────────────────────────╮
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, DPI_MOD, S_D_MOD, S_D_MOD, DPI_MOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX, XXXXXXX, KC_RSFT, KC_RCTL, KC_RALT, KC_RGUI, XXXXXXX,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, _______, DRGSCRL, SNIPING, EEP_RST, QK_BOOT, QK_BOOT, EEP_RST, SNIPING, DRGSCRL, _______, XXXXXXX,
// ╰──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────╯
KC_BTN2, KC_BTN1, KC_BTN3, KC_BTN3, KC_BTN1
// ╰───────────────────────────╯ ╰──────────────────╯
),
};
// clang-format on
#ifdef POINTING_DEVICE_ENABLE
# ifdef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) {
if (abs(mouse_report.x) > CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD || abs(mouse_report.y) > CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD) {
if (auto_pointer_layer_timer == 0) {
layer_on(LAYER_POINTER);
# ifdef RGB_MATRIX_ENABLE
rgb_matrix_mode_noeeprom(RGB_MATRIX_NONE);
rgb_matrix_sethsv_noeeprom(HSV_GREEN);
# endif // RGB_MATRIX_ENABLE
}
auto_pointer_layer_timer = timer_read();
}
return mouse_report;
}
void matrix_scan_user(void) {
if (auto_pointer_layer_timer != 0 && TIMER_DIFF_16(timer_read(), auto_pointer_layer_timer) >= CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS) {
auto_pointer_layer_timer = 0;
layer_off(LAYER_POINTER);
# ifdef RGB_MATRIX_ENABLE
rgb_matrix_mode_noeeprom(RGB_MATRIX_STARTUP_MODE);
# endif // RGB_MATRIX_ENABLE
}
}
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
# ifdef CHARYBDIS_AUTO_SNIPING_ON_LAYER
layer_state_t layer_state_set_user(layer_state_t state) {
charybdis_set_pointer_sniping_enabled(layer_state_cmp(state, CHARYBDIS_AUTO_SNIPING_ON_LAYER));
return state;
}
# endif // CHARYBDIS_AUTO_SNIPING_ON_LAYER
#endif // POINTING_DEVICE_ENABLE
#ifdef RGB_MATRIX_ENABLE
// Forward-declare this helper function since it is defined in rgb_matrix.c.
void rgb_matrix_update_pwm_buffers(void);
#endif
void shutdown_user(void) {
#ifdef RGBLIGHT_ENABLE
rgblight_enable_noeeprom();
rgblight_mode_noeeprom(1);
rgblight_setrgb_red();
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
rgb_matrix_set_color_all(RGB_RED);
rgb_matrix_update_pwm_buffers();
#endif // RGB_MATRIX_ENABLE
}

57
keyboards/bastardkb/charybdis/3x6/keymaps/via/readme.md Normal file
View File

@ -0,0 +1,57 @@
# Charybdis Mini (3x6) `via` keymap
The Charydbis Mini (3x6) `via` keymap is inspired from the original [Dactyl Manuform](../../../../../handwired/dactyl_manuform) default keymap, with some features and changes specific to the Charybdis.
This layout supports RGB matrix. However, due to space constraints on the MCU, only a limited number of effect can be enabled at once. Look at the `config.h` file and enable your favorite effect.
## Customizing the keymap
### Dynamic DPI scaling
Use the following keycodes to change the default DPI:
- `POINTER_DEFAULT_DPI_FORWARD`: increases the DPI; decreases when shifted;
- `POINTER_DEFAULT_DPI_REVERSE`: decreases the DPI; increases when shifted.
There's a maximum of 16 possible values for the sniping mode DPI. See the [Charybdis documentation](../../README.md) for more information.
Use the following keycodes to change the sniping mode DPI:
- `POINTER_SNIPING_DPI_FORWARD`: increases the DPI; decreases when shifted;
- `POINTER_SNIPING_DPI_REVERSE`: decreases the DPI; increases when shifted.
There's a maximum of 4 possible values for the sniping mode DPI. See the [Charybdis documentation](../../README.md) for more information.
### Drag-scroll
Use the `DRAGSCROLL_MODE` keycode to enable drag-scroll on hold. Use the `DRAGSCROLL_TOGGLE` keycode to enable/disable drag-scroll on key press.
### Sniping
Use the `SNIPING_MODE` keycode to enable sniping mode on hold. Use the `SNIPING_TOGGLE` keycode to enable/disable sniping mode on key press.
Change the value of `CHARYBDIS_AUTO_SNIPING_ON_LAYER` to automatically enable sniping mode on layer change. By default, sniping mode is enabled on the pointer layer:
```c
#define CHARYBDIS_AUTO_SNIPING_ON_LAYER LAYER_POINTER
```
### Auto pointer layer
The pointer layer can be automatically enabled when moving the trackball. To enable or disable this behavior, add or remove the following define:
```c
#define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
```
By default, the layer is turned off 1 second after the last registered trackball movement:
```c
#define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS 1000
```
The trigger sensibility can also be tuned. The lower the value, the more sensible the trigger:
```c
#define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD 8
```

1
keyboards/bastardkb/charybdis/3x6/keymaps/via/rules.mk Normal file
View File

@ -0,0 +1 @@
VIA_ENABLE = yes

15
keyboards/bastardkb/charybdis/3x6/readme.md Normal file
View File

@ -0,0 +1,15 @@
# Charybdis Nano (3x6)
An ergonomic keyboard with integrated trackball.
The Charybdis is available in 4x6, 3x6 and 3x5 form factor at [bastardkb.com](https://bastardkb.com).
## Keymaps
### [`default`](keymaps/default)
A simple QWERTY layout with 4 layers.
### [`via`](keymaps/via)
A [Miryoku-inspired](https://github.com/manna-harbour/miryoku), feature-rich, keymap with VIA support.

41
keyboards/bastardkb/charybdis/3x6/v1/elitec/config.h Normal file
View File

@ -0,0 +1,41 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ B7, C6, D4, B5 }
#define MATRIX_COL_PINS \
{ D5, C7, F0, D7, E6, B4 }
#define MATRIX_ROW_PINS_RIGHT \
{ F0, C6, D4, B5 }
#define MATRIX_COL_PINS_RIGHT \
{ F1, C7, B7, D7, E6, B4 }
/* Handedness. */
#define MASTER_RIGHT
/* serial.c configuration (for split keyboard). */
#define SOFT_SERIAL_PIN D2
/* RGB settings. */
#define RGB_DI_PIN D3
/* PMW3360 settings. */
#define PMW33XX_CS_PIN B0

6
keyboards/bastardkb/charybdis/3x6/v1/elitec/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis Mini (3x6) Elite-C",
"usb": {
"device_version": "1.0.0",
},
}

35
keyboards/bastardkb/charybdis/3x6/v1/elitec/rules.mk Normal file
View File

@ -0,0 +1,35 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
AUDIO_SUPPORTED = no # Audio is not supported
RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default
RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
SPLIT_KEYBOARD = yes
LAYOUTS = split_3x6_3
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
# Enable link-time optimization by default. The Charybdis packs a lot of
# features (RGB, Via, trackball) in a small atmega32u4 package.
LTO_ENABLE = yes

36
keyboards/bastardkb/charybdis/3x6/v2/elitec/config.h Normal file
View File

@ -0,0 +1,36 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ F7, C6, D4, B5 }
#define MATRIX_COL_PINS \
{ F6, F5, B6, D7, E6, B4 }
/* Handedness. */
#define MASTER_RIGHT
/* serial.c configuration (for split keyboard). */
#define SOFT_SERIAL_PIN D2
/* RGB settings. */
#define RGB_DI_PIN D3
/* PMW3360 settings. */
#define PMW33XX_CS_PIN F0

6
keyboards/bastardkb/charybdis/3x6/v2/elitec/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis Mini (3x6) Elite-C",
"usb": {
"device_version": "2.0.0",
},
}

35
keyboards/bastardkb/charybdis/3x6/v2/elitec/rules.mk Normal file
View File

@ -0,0 +1,35 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
AUDIO_SUPPORTED = no # Audio is not supported
RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default
RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
SPLIT_KEYBOARD = yes
LAYOUTS = split_3x6_3
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
# Enable link-time optimization by default. The Charybdis packs a lot of
# features (RGB, Via, trackball) in a small atmega32u4 package.
LTO_ENABLE = yes

50
keyboards/bastardkb/charybdis/3x6/v2/splinky/config.h Normal file
View File

@ -0,0 +1,50 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ GP26, GP5, GP4, GP9 }
#define MATRIX_COL_PINS \
{ GP27, GP28, GP15, GP6, GP7, GP8 }
/* Handedness. */
#define MASTER_RIGHT
// To use the handedness pin, resistors need to be installed on the adapter PCB.
// If so, uncomment the following code, and undefine MASTER_RIGHT above.
// #define SPLIT_HAND_PIN GP13
// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
/* serial.c configuration (for split keyboard). */
#define SOFT_SERIAL_PIN GP1
/* RGB settings. */
#define RGB_DI_PIN GP0
/* SPI & PMW3360 settings. */
#define SPI_DRIVER SPID0
#define SPI_SCK_PIN GP18
#define SPI_MOSI_PIN GP19
#define SPI_MISO_PIN GP20
#define PMW33XX_CS_PIN GP14
/* Reset. */
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

6
keyboards/bastardkb/charybdis/3x6/v2/splinky/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis Mini (3x6) Splinky",
"usb": {
"device_version": "2.0.0",
},
}

23
keyboards/bastardkb/charybdis/3x6/v2/splinky/mcuconf.h Normal file
View File

@ -0,0 +1,23 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include_next "mcuconf.h"
#undef RP_SPI_USE_SPI0
#define RP_SPI_USE_SPI0 TRUE

37
keyboards/bastardkb/charybdis/3x6/v2/splinky/rules.mk Normal file
View File

@ -0,0 +1,37 @@
# MCU name
MCU = RP2040
# Bootloader selection
BOOTLOADER = rp2040
# RP2040-specific options
ALLOW_WARNINGS = yes
PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
AUDIO_SUPPORTED = no # Audio is not supported
RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default
RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
SPLIT_KEYBOARD = yes
LAYOUTS = split_3x6_3
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
SERIAL_DRIVER = vendor
WS2812_DRIVER = vendor

6
keyboards/bastardkb/charybdis/4x6/4x6.c
View File

@ -36,6 +36,10 @@
* 26 27 28 53 54 XX
* 25 24 55 XX
* ╰────────────╯ ╰────────────╯
*
* Note: the LED config simulates 58 LEDs instead of the actual 56 to prevent
* confusion when testing LEDs during assembly when handedness is not set
* correctly. Those fake LEDs are bound to the physical bottom-left corner.
*/
led_config_t g_led_config = { {
/* Key Matrix to LED index. */
@ -70,6 +74,7 @@ led_config_t g_led_config = { {
/* index=45 */ { 160, 0 }, { 160, 12 }, { 160, 24 }, { 160, 36 },
/* index=49 */ { 144, 0 }, { 144, 12 }, { 144, 24 }, { 144, 36 },
/* index=53 */ { 112, 52 }, { 128, 64 }, { 112, 64 },
/* index=56 */ { 0, 0 }, { 0, 0 },
}, {
/* LED index to flag. */
// Left split.
@ -89,6 +94,7 @@ led_config_t g_led_config = { {
/* index=45 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=49 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,
/* index=53 */ LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, // Thumb cluster
/* index=55 */ LED_FLAG_MODIFIER, LED_FLAG_MODIFIER, // Thumb cluster fakes
} };
#endif
// clang-format on

62
keyboards/bastardkb/charybdis/4x6/blackpill/config.h Normal file
View File

@ -0,0 +1,62 @@
/*
* Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna)
* Copyright 2021 Stefan Kerkmann (@KarlK90)
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Publicw License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ B15, A2, B8, A8, B9 }
#define MATRIX_COL_PINS \
{ B0, B1, B10, B3, B4, B5 }
/* Handedness. */
#define SPLIT_HAND_PIN A3 // High -> left, Low -> right.
/* RGB settings. */
#define RGB_DI_PIN A1
#define WS2812_PWM_DRIVER PWMD2
#define WS2812_PWM_CHANNEL 2
#define WS2812_PWM_PAL_MODE 1
#define WS2812_EXTERNAL_PULLUP
#define WS2812_DMA_STREAM STM32_DMA1_STREAM1
#define WS2812_DMA_CHANNEL 3
#define WS2812_PWM_TARGET_PERIOD 800000
/* Serial configuration for split keyboard. */
#define SERIAL_USART_TX_PIN A9
/* CRC. */
#define CRC8_USE_TABLE
#define CRC8_OPTIMIZE_SPEED
/* SPI config for EEPROM and pmw3360 sensor. */
#define SPI_DRIVER SPID1
#define SPI_SCK_PIN A5
#define SPI_SCK_PAL_MODE 5
#define SPI_MOSI_PIN A7
#define SPI_MOSI_PAL_MODE 5
#define SPI_MISO_PIN A6
#define SPI_MISO_PAL_MODE 5
/* EEPROM config. */
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
/* PMW3360 settings. */
#define PMW33XX_CS_PIN B14
#define PMW33XX_CS_DIVISOR 64

29
keyboards/bastardkb/charybdis/4x6/blackpill/halconf.h Normal file
View File

@ -0,0 +1,29 @@
/*
* Copyright 2020 Nick Brassel (tzarc)
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define HAL_USE_PWM TRUE
#define HAL_USE_SERIAL TRUE
//#define HAL_USE_I2C TRUE
#define HAL_USE_SPI TRUE
#define SPI_USE_WAIT TRUE
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
//#define HAL_USE_GPT TRUE
#include_next "halconf.h"

6
keyboards/bastardkb/charybdis/4x6/blackpill/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis (4x6) Blackpill",
"usb": {
"device_version": "1.0.0",
},
}

61
keyboards/bastardkb/charybdis/4x6/blackpill/mcuconf.h Normal file
View File

@ -0,0 +1,61 @@
/*
* Copyright 2020 Nick Brassel (tzarc)
* Copyright 2021 Stefan Kerkmann (@KarlK90)
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include_next "mcuconf.h"
#undef STM32_I2C_USE_I2C1
#define STM32_I2C_USE_I2C1 TRUE
#undef STM32_I2C_I2C1_RX_DMA_STREAM
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
#undef STM32_I2C_I2C1_TX_DMA_STREAM
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#undef STM32_PWM_USE_TIM2
#define STM32_PWM_USE_TIM2 TRUE
#undef STM32_PWM_USE_TIM3
#define STM32_PWM_USE_TIM3 TRUE
#undef STM32_SPI_USE_SPI1
#define STM32_SPI_USE_SPI1 TRUE
#undef STM32_SPI_SPI1_RX_DMA_STREAM
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
#undef STM32_SPI_SPI1_TX_DMA_STREAM
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
#undef STM32_SERIAL_USE_USART1
#define STM32_SERIAL_USE_USART1 TRUE
// #undef STM32_SERIAL_USE_USART2
// #define STM32_SERIAL_USE_USART2 TRUE
// #undef STM32_UART_USART2_RX_DMA_STREAM
// #define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
// #undef STM32_UART_USART2_TX_DMA_STREAM
// #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#undef STM32_GPT_USE_TIM4
#define STM32_GPT_USE_TIM4 TRUE
#undef STM32_ST_USE_TIMER
#define STM32_ST_USE_TIMER 5

3
keyboards/bastardkb/charybdis/4x6/blackpill/readme.md Normal file
View File

@ -0,0 +1,3 @@
# Charybdis (4x6) BlackPill
An ergonomic keyboard with integrated trackball, with BlackPill (STM32F411) mod.

40
keyboards/bastardkb/charybdis/4x6/blackpill/rules.mk Normal file
View File

@ -0,0 +1,40 @@
# MCU name
MCU = STM32F411
BOARD = BLACKPILL_STM32_F411
# Bootloader selection
BOOTLOADER = stm32-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
AUDIO_SUPPORTED = no # Audio is not supported.
RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default.
RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default.
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
# Charybdis is a split 4x6 keyboard with a maximum of 5 thumb keys (3 on the
# trackball side).
SPLIT_KEYBOARD = yes
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
KEYBOARD_SHARED_EP = yes
EEPROM_DRIVER = spi
WS2812_DRIVER = pwm
SERIAL_DRIVER = usart
DEBOUNCE_TYPE = asym_eager_defer_pk

47
keyboards/bastardkb/charybdis/4x6/config.h
View File

@ -18,55 +18,24 @@
#pragma once
#define VENDOR_ID 0xA8F8
#define PRODUCT_ID 0x1833
#define DEVICE_VER 0x0001
#define MANUFACTURER Bastard Keyboards
#define PRODUCT Charybdis
#include "config_common.h"
/* Key matrix configuration. */
// Rows are doubled-up.
#define MATRIX_ROWS 10
#define MATRIX_ROWS 10 // Rows are doubled-up.
#define MATRIX_COLS 6
// Wiring configuration for each half.
#define MATRIX_ROW_PINS \
{ F1, B7, C6, D4, B5 }
#define MATRIX_COL_PINS \
{ D5, C7, F0, D7, E6, B4 }
#define MATRIX_ROW_PINS_RIGHT \
{ D5, F0, C6, D4, B5 }
#define MATRIX_COL_PINS_RIGHT \
{ F1, C7, B7, D7, E6, B4 }
#define DIODE_DIRECTION ROW2COL
#define ROTATIONAL_TRANSFORM_ANGLE -25
/* Handedness. */
#define MASTER_RIGHT
/* Bootmagic Lite configuration. */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
#define BOOTMAGIC_LITE_ROW_RIGHT 5
#define BOOTMAGIC_LITE_COLUMN_RIGHT 0
/* serial.c configuration (for split keyboard) */
#define SOFT_SERIAL_PIN D2
/* Set 0 if debouncing isn't needed */
/* Set 0 if debouncing isn't needed. */
#define DEBOUNCE 5
/* PMW33XX settings. */
#define PMW33XX_CS_PIN B0
/* Trackball angle adjustment. */
#define ROTATIONAL_TRANSFORM_ANGLE -25
#define RGB_DI_PIN D3
#define RGBLED_NUM 56
/* RGB settings. */
#define RGBLED_NUM 58
#define RGBLED_SPLIT \
{ 29, 27 }
{ 29, 29 }
/* RGB matrix support. */
#ifdef RGB_MATRIX_ENABLE

7
keyboards/bastardkb/charybdis/4x6/info.json
View File

@ -1,7 +1,8 @@
{
"keyboard_name": "Charybdis",
"url": "https://www.bastardkb.com",
"maintainer": "Quentin Lebastard",
"url": "https://bastardkb.com/charybdis",
"usb": {
"pid": "0x1833",
},
"layouts": {
"LAYOUT_charybdis_4x6": {
"layout": [

4
keyboards/bastardkb/charybdis/4x6/keymaps/default/keymap.c
View File

@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
RGB_TOG, KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX, KC_PPLS, KC_P4, KC_P5, KC_P6, KC_PMNS, KC_PEQL,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, KC_PAST, KC_P1, KC_P2, KC_P3, KC_PSLS, KC_PDOT,
RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, EEP_RST, QK_BOOT, KC_PAST, KC_P1, KC_P2, KC_P3, KC_PSLS, KC_PDOT,
// ╰──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────╯
XXXXXXX, XXXXXXX, _______, XXXXXXX, _______,
XXXXXXX, XXXXXXX, KC_P0
@ -65,7 +65,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
KC_MPLY, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_RSFT, KC_RCTL, KC_RALT, KC_RGUI, KC_MUTE,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
KC_MPRV, KC_HOME, KC_PGUP, KC_PGDN, KC_END, XXXXXXX, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
KC_MPRV, KC_HOME, KC_PGUP, KC_PGDN, KC_END, XXXXXXX, QK_BOOT, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
// ╰──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────╯
_______, _______, XXXXXXX, _______, XXXXXXX,
_______, _______, XXXXXXX

13
keyboards/bastardkb/charybdis/4x6/keymaps/via/config.h
View File

@ -19,7 +19,7 @@
#ifdef VIA_ENABLE
/* VIA configuration. */
# define DYNAMIC_KEYMAP_LAYER_COUNT 4
#endif // VIA_ENABLE
#endif // VIA_ENABLE
/* Disable unused features. */
#define NO_ACTION_ONESHOT
@ -33,21 +33,16 @@
* See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
*/
# define TAPPING_TERM 200
#endif // TAPPING_TERM
#endif // TAPPING_TERM
/* Charybdis-specific features. */
#ifdef POINTING_DEVICE_ENABLE
// Enable pointer acceleration, which increases the speed by ~2x for large
// displacement, while maintaining 1x speed for slow movements.
// - `CHARYBDIS_POINTER_ACCELERATION_FACTOR`
# define CHARYBDIS_POINTER_ACCELERATION_ENABLE
// Automatically enable the pointer layer when moving the trackball. See also:
// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS`
// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD`
// #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
#endif // POINTING_DEVICE_ENABLE
#endif // POINTING_DEVICE_ENABLE
/* RGB Matrix. */
@ -69,4 +64,4 @@
# define RGB_MATRIX_STARTUP_SAT 255
# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
#endif // RGB_MATRIX_ENABLE
#endif // RGB_MATRIX_ENABLE

37
keyboards/bastardkb/charybdis/4x6/keymaps/via/keymap.c
View File

@ -18,7 +18,7 @@
#ifdef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
# include "timer.h"
#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
enum charybdis_keymap_layers {
LAYER_BASE = 0,
@ -35,18 +35,25 @@ static uint16_t auto_pointer_layer_timer = 0;
# ifndef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
# define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS 1000
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS
# ifndef CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
# define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD 8
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD
#endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
#define LOWER MO(LAYER_LOWER)
#define RAISE MO(LAYER_RAISE)
#define PT_Z LT(LAYER_POINTER, KC_Z)
#define PT_SLSH LT(LAYER_POINTER, KC_SLSH)
#ifndef POINTING_DEVICE_ENABLE
# define DRGSCRL KC_NO
# define DPI_MOD KC_NO
# define S_D_MOD KC_NO
# define SNIPING KC_NO
#endif // !POINTING_DEVICE_ENABLE
// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[LAYER_BASE] = LAYOUT_charybdis_4x6(
@ -102,7 +109,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX, XXXXXXX, KC_RSFT, KC_RCTL, KC_RALT, KC_RGUI, XXXXXXX,
// ├──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────┤
XXXXXXX, _______, DRGSCRL, SNIPING, EEP_RST, QK_BOOT, QK_BOOT, EEP_RST, SNIPING, DRGSCRL, _______, XXXXXXX,
XXXXXXX, _______, DRGSCRL, SNIPING, EEP_RST, QK_BOOT, QK_BOOT, EEP_RST, SNIPING, DRGSCRL, _______, XXXXXXX,
// ╰──────────────────────────────────────────────────────┤ ├──────────────────────────────────────────────────────╯
KC_BTN2, KC_BTN1, KC_BTN3, KC_BTN3, KC_BTN1,
XXXXXXX, KC_BTN2, KC_BTN2
@ -120,33 +127,31 @@ report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) {
# ifdef RGB_MATRIX_ENABLE
rgb_matrix_mode_noeeprom(RGB_MATRIX_NONE);
rgb_matrix_sethsv_noeeprom(HSV_GREEN);
# endif // RGB_MATRIX_ENABLE
# endif // RGB_MATRIX_ENABLE
}
auto_pointer_layer_timer = timer_read();
}
return mouse_report;
}
void matrix_scan_kb(void) {
void matrix_scan_user(void) {
if (auto_pointer_layer_timer != 0 && TIMER_DIFF_16(timer_read(), auto_pointer_layer_timer) >= CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS) {
auto_pointer_layer_timer = 0;
layer_off(LAYER_POINTER);
# ifdef RGB_MATRIX_ENABLE
rgb_matrix_mode_noeeprom(RGB_MATRIX_STARTUP_MODE);
# endif // RGB_MATRIX_ENABLE
# endif // RGB_MATRIX_ENABLE
}
matrix_scan_user();
}
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
# endif // CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
# ifdef CHARYBDIS_AUTO_SNIPING_ON_LAYER
layer_state_t layer_state_set_kb(layer_state_t state) {
state = layer_state_set_user(state);
layer_state_t layer_state_set_user(layer_state_t state) {
charybdis_set_pointer_sniping_enabled(layer_state_cmp(state, CHARYBDIS_AUTO_SNIPING_ON_LAYER));
return state;
}
# endif // CHARYBDIS_AUTO_SNIPING_ON_LAYER
#endif // POINTING_DEVICE_ENABLE
# endif // CHARYBDIS_AUTO_SNIPING_ON_LAYER
#endif // POINTING_DEVICE_ENABLE
#ifdef RGB_MATRIX_ENABLE
// Forward-declare this helper function since it is defined in rgb_matrix.c.
@ -158,9 +163,9 @@ void shutdown_user(void) {
rgblight_enable_noeeprom();
rgblight_mode_noeeprom(1);
rgblight_setrgb_red();
#endif // RGBLIGHT_ENABLE
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
rgb_matrix_set_color_all(RGB_RED);
rgb_matrix_update_pwm_buffers();
#endif // RGB_MATRIX_ENABLE
#endif // RGB_MATRIX_ENABLE
}

42
keyboards/bastardkb/charybdis/4x6/v1/elitec/config.h Normal file
View File

@ -0,0 +1,42 @@
/*
* Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna)
* Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ F1, B7, C6, D4, B5 }
#define MATRIX_COL_PINS \
{ D5, C7, F0, D7, E6, B4 }
#define MATRIX_ROW_PINS_RIGHT \
{ D5, F0, C6, D4, B5 }
#define MATRIX_COL_PINS_RIGHT \
{ F1, C7, B7, D7, E6, B4 }
/* Handedness. */
#define MASTER_RIGHT
/* serial.c configuration (for split keyboard). */
#define SOFT_SERIAL_PIN D2
/* RGB settings. */
#define RGB_DI_PIN D3
/* PMW3360 settings. */
#define PMW33XX_CS_PIN B0

6
keyboards/bastardkb/charybdis/4x6/v1/elitec/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis (4x6) Elite-C",
"usb": {
"device_version": "1.0.0",
},
}

9
keyboards/bastardkb/charybdis/4x6/rules.mk → keyboards/bastardkb/charybdis/4x6/v1/elitec/rules.mk
View File

@ -23,15 +23,14 @@ RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by def
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
# Enable link-time optimization by default. The Charybdis packs a lot of
# features (RGB, Via, trackball) in a small atmega32u4 package.
LTO_ENABLE = yes
# Charybdis is a split 4x6 keyboard with a maximum of 5 thumb keys (3 on the
# trackball side).
SPLIT_KEYBOARD = yes
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
# https://qmk.fm/changes/2018-11-16-use-a-single-endpoint-for-hid-reports
MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
# Enable link-time optimization by default. The Charybdis packs a lot of
# features (RGB, Via, trackball) in a small atmega32u4 package.
LTO_ENABLE = yes

36
keyboards/bastardkb/charybdis/4x6/v2/elitec/config.h Normal file
View File

@ -0,0 +1,36 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ F4, F7, C6, D4, B5 }
#define MATRIX_COL_PINS \
{ F6, F5, B6, D7, E6, B4 }
/* Handedness. */
#define MASTER_RIGHT
/* serial.c configuration (for split keyboard). */
#define SOFT_SERIAL_PIN D2
/* RGB settings. */
#define RGB_DI_PIN D3
/* PMW3360 settings. */
#define PMW33XX_CS_PIN F0

6
keyboards/bastardkb/charybdis/4x6/v2/elitec/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis (4x6) Elite-C",
"usb": {
"device_version": "2.0.0",
},
}

36
keyboards/bastardkb/charybdis/4x6/v2/elitec/rules.mk Normal file
View File

@ -0,0 +1,36 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
AUDIO_SUPPORTED = no # Audio is not supported.
RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default.
RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default.
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
# Charybdis is a split 4x6 keyboard with a maximum of 5 thumb keys (3 on the
# trackball side).
SPLIT_KEYBOARD = yes
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
MOUSE_SHARED_EP = no # Unify multiple HID interfaces into a single Endpoint
# Enable link-time optimization by default. The Charybdis packs a lot of
# features (RGB, Via, trackball) in a small atmega32u4 package.
LTO_ENABLE = yes

50
keyboards/bastardkb/charybdis/4x6/v2/splinky/config.h Normal file
View File

@ -0,0 +1,50 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ GP29, GP26, GP5, GP4, GP9 }
#define MATRIX_COL_PINS \
{ GP27, GP28, GP15, GP6, GP7, GP8 }
/* Handedness. */
#define MASTER_RIGHT
// To use the handedness pin, resistors need to be installed on the adapter PCB.
// If so, uncomment the following code, and undefine MASTER_RIGHT above.
// #define SPLIT_HAND_PIN GP13
// #define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
/* serial.c configuration (for split keyboard). */
#define SOFT_SERIAL_PIN GP1
/* RGB settings. */
#define RGB_DI_PIN GP0
/* SPI & PMW3360 settings. */
#define SPI_DRIVER SPID0
#define SPI_SCK_PIN GP18
#define SPI_MOSI_PIN GP19
#define SPI_MISO_PIN GP20
#define PMW33XX_CS_PIN GP14
/* Reset. */
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

6
keyboards/bastardkb/charybdis/4x6/v2/splinky/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Charybdis (4x6) Splinky",
"usb": {
"device_version": "2.0.0",
},
}

23
keyboards/bastardkb/charybdis/4x6/v2/splinky/mcuconf.h Normal file
View File

@ -0,0 +1,23 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include_next "mcuconf.h"
#undef RP_SPI_USE_SPI0
#define RP_SPI_USE_SPI0 TRUE

36
keyboards/bastardkb/charybdis/4x6/v2/splinky/rules.mk Normal file
View File

@ -0,0 +1,36 @@
# MCU name
MCU = RP2040
# Bootloader selection
BOOTLOADER = rp2040
# RP2040-specific options
ALLOW_WARNINGS = yes
PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
AUDIO_SUPPORTED = no # Audio is not supported
RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default
RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
RGB_MATRIX_DRIVER = WS2812
SPLIT_KEYBOARD = yes
POINTING_DEVICE_ENABLE = yes # Enable trackball
POINTING_DEVICE_DRIVER = pmw3360
SERIAL_DRIVER = vendor
WS2812_DRIVER = vendor

134
keyboards/bastardkb/charybdis/charybdis.c
View File

@ -23,43 +23,39 @@
#ifdef CONSOLE_ENABLE
# include "print.h"
#endif // CONSOLE_ENABLE
#endif // CONSOLE_ENABLE
#ifdef POINTING_DEVICE_ENABLE
# ifndef CHARYBDIS_MINIMUM_DEFAULT_DPI
# define CHARYBDIS_MINIMUM_DEFAULT_DPI 400
# endif // CHARYBDIS_MINIMUM_DEFAULT_DPI
# endif // CHARYBDIS_MINIMUM_DEFAULT_DPI
# ifndef CHARYBDIS_DEFAULT_DPI_CONFIG_STEP
# define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 200
# endif // CHARYBDIS_DEFAULT_DPI_CONFIG_STEP
# endif // CHARYBDIS_DEFAULT_DPI_CONFIG_STEP
# ifndef CHARYBDIS_MINIMUM_SNIPING_DPI
# define CHARYBDIS_MINIMUM_SNIPING_DPI 200
# endif // CHARYBDIS_MINIMUM_SNIPER_MODE_DPI
# endif // CHARYBDIS_MINIMUM_SNIPER_MODE_DPI
# ifndef CHARYBDIS_SNIPING_DPI_CONFIG_STEP
# define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100
# endif // CHARYBDIS_SNIPING_DPI_CONFIG_STEP
# endif // CHARYBDIS_SNIPING_DPI_CONFIG_STEP
// Fixed DPI for drag-scroll.
# ifndef CHARYBDIS_DRAGSCROLL_DPI
# define CHARYBDIS_DRAGSCROLL_DPI 100
# endif // CHARYBDIS_DRAGSCROLL_DPI
# endif // CHARYBDIS_DRAGSCROLL_DPI
# ifndef CHARYBDIS_DRAGSCROLL_BUFFER_SIZE
# define CHARYBDIS_DRAGSCROLL_BUFFER_SIZE 6
# endif // !CHARYBDIS_DRAGSCROLL_BUFFER_SIZE
# ifndef CHARYBDIS_POINTER_ACCELERATION_FACTOR
# define CHARYBDIS_POINTER_ACCELERATION_FACTOR 24
# endif // !CHARYBDIS_POINTER_ACCELERATION_FACTOR
# endif // !CHARYBDIS_DRAGSCROLL_BUFFER_SIZE
typedef union {
uint8_t raw;
struct {
uint8_t pointer_default_dpi : 4; // 16 steps available.
uint8_t pointer_sniping_dpi : 2; // 4 steps available.
uint8_t pointer_default_dpi : 4; // 16 steps available.
uint8_t pointer_sniping_dpi : 2; // 4 steps available.
bool is_dragscroll_enabled : 1;
bool is_sniping_enabled : 1;
} __attribute__((packed));
@ -89,13 +85,19 @@ static void read_charybdis_config_from_eeprom(charybdis_config_t* config) {
* resets these 2 values to `false` since it does not make sense to persist
* these across reboots of the board.
*/
static void write_charybdis_config_to_eeprom(charybdis_config_t* config) { eeconfig_update_kb(config->raw); }
static void write_charybdis_config_to_eeprom(charybdis_config_t* config) {
eeconfig_update_kb(config->raw);
}
/** \brief Return the current value of the pointer's default DPI. */
static uint16_t get_pointer_default_dpi(charybdis_config_t* config) { return (uint16_t)config->pointer_default_dpi * CHARYBDIS_DEFAULT_DPI_CONFIG_STEP + CHARYBDIS_MINIMUM_DEFAULT_DPI; }
static uint16_t get_pointer_default_dpi(charybdis_config_t* config) {
return (uint16_t)config->pointer_default_dpi * CHARYBDIS_DEFAULT_DPI_CONFIG_STEP + CHARYBDIS_MINIMUM_DEFAULT_DPI;
}
/** \brief Return the current value of the pointer's sniper-mode DPI. */
static uint16_t get_pointer_sniping_dpi(charybdis_config_t* config) { return (uint16_t)config->pointer_sniping_dpi * CHARYBDIS_SNIPING_DPI_CONFIG_STEP + CHARYBDIS_MINIMUM_SNIPING_DPI; }
static uint16_t get_pointer_sniping_dpi(charybdis_config_t* config) {
return (uint16_t)config->pointer_sniping_dpi * CHARYBDIS_SNIPING_DPI_CONFIG_STEP + CHARYBDIS_MINIMUM_SNIPING_DPI;
}
/** \brief Set the appropriate DPI for the input config. */
static void maybe_update_pointing_device_cpi(charybdis_config_t* config) {
@ -130,64 +132,54 @@ static void step_pointer_sniping_dpi(charybdis_config_t* config, bool forward) {
maybe_update_pointing_device_cpi(config);
}
uint16_t charybdis_get_pointer_default_dpi(void) { return get_pointer_default_dpi(&g_charybdis_config); }
uint16_t charybdis_get_pointer_default_dpi(void) {
return get_pointer_default_dpi(&g_charybdis_config);
}
uint16_t charybdis_get_pointer_sniping_dpi(void) { return get_pointer_sniping_dpi(&g_charybdis_config); }
uint16_t charybdis_get_pointer_sniping_dpi(void) {
return get_pointer_sniping_dpi(&g_charybdis_config);
}
void charybdis_cycle_pointer_default_dpi_noeeprom(bool forward) { step_pointer_default_dpi(&g_charybdis_config, forward); }
void charybdis_cycle_pointer_default_dpi_noeeprom(bool forward) {
step_pointer_default_dpi(&g_charybdis_config, forward);
}
void charybdis_cycle_pointer_default_dpi(bool forward) {
step_pointer_default_dpi(&g_charybdis_config, forward);
write_charybdis_config_to_eeprom(&g_charybdis_config);
}
void charybdis_cycle_pointer_sniping_dpi_noeeprom(bool forward) { step_pointer_sniping_dpi(&g_charybdis_config, forward); }
void charybdis_cycle_pointer_sniping_dpi_noeeprom(bool forward) {
step_pointer_sniping_dpi(&g_charybdis_config, forward);
}
void charybdis_cycle_pointer_sniping_dpi(bool forward) {
step_pointer_sniping_dpi(&g_charybdis_config, forward);
write_charybdis_config_to_eeprom(&g_charybdis_config);
}
bool charybdis_get_pointer_sniping_enabled(void) { return g_charybdis_config.is_sniping_enabled; }
bool charybdis_get_pointer_sniping_enabled(void) {
return g_charybdis_config.is_sniping_enabled;
}
void charybdis_set_pointer_sniping_enabled(bool enable) {
g_charybdis_config.is_sniping_enabled = enable;
maybe_update_pointing_device_cpi(&g_charybdis_config);
}
bool charybdis_get_pointer_dragscroll_enabled(void) { return g_charybdis_config.is_dragscroll_enabled; }
bool charybdis_get_pointer_dragscroll_enabled(void) {
return g_charybdis_config.is_dragscroll_enabled;
}
void charybdis_set_pointer_dragscroll_enabled(bool enable) {
g_charybdis_config.is_dragscroll_enabled = enable;
maybe_update_pointing_device_cpi(&g_charybdis_config);
}
# ifndef CONSTRAIN_HID
# define CONSTRAIN_HID(value) ((value) < XY_REPORT_MIN ? XY_REPORT_MIN : ((value) > XY_REPORT_MAX ? XY_REPORT_MAX : (value)))
# endif // !CONSTRAIN_HID
/**
* \brief Add optional acceleration effect.
*
* If `CHARYBDIS_ENABLE_POINTER_ACCELERATION` is defined, add a simple and naive
* acceleration effect to the provided value. Return the value unchanged
* otherwise.
*/
# ifndef DISPLACEMENT_WITH_ACCELERATION
# ifdef CHARYBDIS_POINTER_ACCELERATION_ENABLE
# define DISPLACEMENT_WITH_ACCELERATION(d) (CONSTRAIN_HID(d > 0 ? d * d / CHARYBDIS_POINTER_ACCELERATION_FACTOR + d : -d * d / CHARYBDIS_POINTER_ACCELERATION_FACTOR + d))
# else // !CHARYBDIS_POINTER_ACCELERATION_ENABLE
# define DISPLACEMENT_WITH_ACCELERATION(d) (d)
# endif // CHARYBDIS_POINTER_ACCELERATION_ENABLE
# endif // !DISPLACEMENT_WITH_ACCELERATION
/**
* \brief Augment the pointing device behavior.
*
* Implement the Charybdis-specific features for pointing devices:
* - Drag-scroll
* - Sniping
* - Acceleration
* Implement drag-scroll.
*/
static void pointing_device_task_charybdis(report_mouse_t* mouse_report) {
static int16_t scroll_buffer_x = 0;
@ -197,12 +189,12 @@ static void pointing_device_task_charybdis(report_mouse_t* mouse_report) {
scroll_buffer_x -= mouse_report->x;
# else
scroll_buffer_x += mouse_report->x;
# endif // CHARYBDIS_DRAGSCROLL_REVERSE_X
# endif // CHARYBDIS_DRAGSCROLL_REVERSE_X
# ifdef CHARYBDIS_DRAGSCROLL_REVERSE_Y
scroll_buffer_y -= mouse_report->y;
# else
scroll_buffer_y += mouse_report->y;
# endif // CHARYBDIS_DRAGSCROLL_REVERSE_Y
# endif // CHARYBDIS_DRAGSCROLL_REVERSE_Y
mouse_report->x = 0;
mouse_report->y = 0;
if (abs(scroll_buffer_x) > CHARYBDIS_DRAGSCROLL_BUFFER_SIZE) {
@ -213,9 +205,6 @@ static void pointing_device_task_charybdis(report_mouse_t* mouse_report) {
mouse_report->v = scroll_buffer_y > 0 ? 1 : -1;
scroll_buffer_y = 0;
}
} else if (!g_charybdis_config.is_sniping_enabled) {
mouse_report->x = DISPLACEMENT_WITH_ACCELERATION(mouse_report->x);
mouse_report->y = DISPLACEMENT_WITH_ACCELERATION(mouse_report->y);
}
}
@ -234,9 +223,9 @@ static bool has_shift_mod(void) {
return mod_config(get_mods()) & MOD_MASK_SHIFT;
# else
return mod_config(get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT;
# endif // NO_ACTION_ONESHOT
# endif // NO_ACTION_ONESHOT
}
# endif // POINTING_DEVICE_ENABLE && !NO_CHARYBDIS_KEYCODES
# endif // POINTING_DEVICE_ENABLE && !NO_CHARYBDIS_KEYCODES
/**
* \brief Outputs the Charybdis configuration to console.
@ -252,16 +241,16 @@ static bool has_shift_mod(void) {
static void debug_charybdis_config_to_console(charybdis_config_t* config) {
# ifdef CONSOLE_ENABLE
dprintf("(charybdis) process_record_kb: config = {\n"
"\traw = 0x%04X,\n"
"\traw = 0x%X,\n"
"\t{\n"
"\t\tis_dragscroll_enabled=%b\n"
"\t\tis_sniping_enabled=%b\n"
"\t\tdefault_dpi=0x%02X (%ld)\n"
"\t\tsniping_dpi=0x%01X (%ld)\n"
"\t\tdefault_dpi=0x%X (%ld)\n"
"\t\tsniping_dpi=0x%X (%ld)\n"
"\t}\n"
"}\n",
config->raw, config->is_dragscroll_enabled, config->is_sniping_enabled, config->pointer_default_dpi, get_pointer_default_dpi(config), config->pointer_sniping_dpi, get_pointer_sniping_dpi(config));
# endif // CONSOLE_ENABLE
# endif // CONSOLE_ENABLE
}
bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
@ -313,7 +302,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
}
break;
}
# endif // !NO_CHARYBDIS_KEYCODES
# endif // !NO_CHARYBDIS_KEYCODES
# ifndef MOUSEKEY_ENABLE
// Simulate mouse keys if full support is not enabled (reduces firmware size
// while maintaining support for mouse keys).
@ -323,8 +312,8 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
pointing_device_set_report(mouse_report);
pointing_device_send();
}
# endif // !MOUSEKEY_ENABLE
# endif // POINTING_DEVICE_ENABLE
# endif // !MOUSEKEY_ENABLE
# endif // POINTING_DEVICE_ENABLE
debug_charybdis_config_to_console(&g_charybdis_config);
return true;
}
@ -360,29 +349,44 @@ void keyboard_post_init_kb(void) {
# ifdef CHARYBDIS_CONFIG_SYNC
void housekeeping_task_kb(void) {
if (is_keyboard_master()) {
// Keep track of the last state, so that we can tell if we need to propagate to slave
// Keep track of the last state, so that we can tell if we need to propagate to slave.
static charybdis_config_t last_charybdis_config = {0};
static uint32_t last_sync = 0;
bool needs_sync = false;
// Check if the state values are different
// Check if the state values are different.
if (memcmp(&g_charybdis_config, &last_charybdis_config, sizeof(g_charybdis_config))) {
needs_sync = true;
memcpy(&last_charybdis_config, &g_charybdis_config, sizeof(g_charybdis_config));
}
// Send to slave every 500ms regardless of state change
// Send to slave every 500ms regardless of state change.
if (timer_elapsed32(last_sync) > 500) {
needs_sync = true;
}
// Perform the sync if requested
// Perform the sync if requested.
if (needs_sync) {
if (transaction_rpc_send(RPC_ID_KB_CONFIG_SYNC, sizeof(g_charybdis_config), &g_charybdis_config)) {
last_sync = timer_read32();
}
}
}
// no need for user function, is called already
// No need to invoke the user-specific callback, as it's been called
// already.
}
# endif // CHARYBDIS_CONFIG_SYNC
#endif // POINTING_DEVICE_ENABLE
#endif // POINTING_DEVICE_ENABLE
#if defined(KEYBOARD_bastardkb_charybdis_3x5_blackpill) || defined(KEYBOARD_bastardkb_charybdis_4x6_blackpill)
void keyboard_pre_init_kb(void) {
setPinInputHigh(A0);
keyboard_pre_init_user();
}
void matrix_scan_kb(void) {
if (!readPin(A0)) {
reset_keyboard();
}
matrix_scan_user();
}
#endif // KEYBOARD_bastardkb_charybdis_3x5_blackpill || KEYBOARD_bastardkb_charybdis_4x6_blackpill

8
keyboards/bastardkb/charybdis/charybdis.h
View File

@ -21,6 +21,8 @@
// clang-format off
#if defined(KEYBOARD_bastardkb_charybdis_3x5)
# include "3x5.h"
#elif defined(KEYBOARD_bastardkb_charybdis_3x6)
# include "3x6.h"
#elif defined(KEYBOARD_bastardkb_charybdis_4x6)
# include "4x6.h"
#else
@ -37,7 +39,7 @@ enum charybdis_keycodes {
POINTER_DEFAULT_DPI_FORWARD = USER00,
# else
POINTER_DEFAULT_DPI_FORWARD = SAFE_RANGE,
# endif // VIA_ENABLE
# endif // VIA_ENABLE
POINTER_DEFAULT_DPI_REVERSE,
POINTER_SNIPING_DPI_FORWARD,
POINTER_SNIPING_DPI_REVERSE,
@ -56,7 +58,7 @@ enum charybdis_keycodes {
# define SNP_TOG SNIPING_MODE_TOGGLE
# define DRGSCRL DRAGSCROLL_MODE
# define DRG_TOG DRAGSCROLL_MODE_TOGGLE
# endif // !NO_CHARYBDIS_KEYCODES
# endif // !NO_CHARYBDIS_KEYCODES
/** \brief Return the current DPI value for the pointer's default mode. */
uint16_t charybdis_get_pointer_default_dpi(void);
@ -123,4 +125,4 @@ bool charybdis_get_pointer_dragscroll_enabled(void);
* are translated into horizontal and vertical scroll movements.
*/
void charybdis_set_pointer_dragscroll_enabled(bool enable);
#endif // POINTING_DEVICE_ENABLE
#endif // POINTING_DEVICE_ENABLE

48
keyboards/bastardkb/charybdis/post_config.h
View File

@ -30,85 +30,85 @@
#ifndef MOUSEKEY_MOVE_DELTA
# ifndef MK_KINETIC_SPEED
# define MOUSEKEY_MOVE_DELTA 5
# else // MK_KINETIC_SPEED
# else // MK_KINETIC_SPEED
# define MOUSEKEY_MOVE_DELTA 25
# endif // !MK_KINETIC_SPEED
#endif // !MOUSEKEY_MOVE_DELTA
# endif // !MK_KINETIC_SPEED
#endif // !MOUSEKEY_MOVE_DELTA
#ifndef MOUSEKEY_DELAY
# ifndef MK_KINETIC_SPEED
# define MOUSEKEY_DELAY 300
# else // MK_KINETIC_SPEED
# else // MK_KINETIC_SPEED
# define MOUSEKEY_DELAY 8
# endif // !MK_KINETIC_SPEED
#endif // !MOUSEKEY_DELAY
# endif // !MK_KINETIC_SPEED
#endif // !MOUSEKEY_DELAY
#ifndef MOUSEKEY_INTERVAL
# ifndef MK_KINETIC_SPEED
# define MOUSEKEY_INTERVAL 50
# else // MK_KINETIC_SPEED
# else // MK_KINETIC_SPEED
# define MOUSEKEY_INTERVAL 20
# endif // !MK_KINETIC_SPEED
#endif // !MOUSEKEY_INTERNAL
# endif // !MK_KINETIC_SPEED
#endif // !MOUSEKEY_INTERNAL
#ifndef MOUSEKEY_MAX_SPEED
# define MOUSEKEY_MAX_SPEED 7
#endif // !MOUSEKEY_MAX_SPEED
#endif // !MOUSEKEY_MAX_SPEED
#ifndef MOUSEKEY_TIME_TO_MAX
# define MOUSEKEY_TIME_TO_MAX 60
#endif // !MOUSEKEY_TIME_TO_MAX
#endif // !MOUSEKEY_TIME_TO_MAX
#ifndef MOUSEKEY_INITIAL_SPEED
# define MOUSEKEY_INITIAL_SPEED 100
#endif // !MOUSEKEY_INITIAL_SPEED
#endif // !MOUSEKEY_INITIAL_SPEED
#ifndef MOUSEKEY_BASE_SPEED
# define MOUSEKEY_BASE_SPEED 1000
#endif // !MOUSEKEY_BASE_SPEED
#endif // !MOUSEKEY_BASE_SPEED
#ifndef MOUSEKEY_DECELERATED_SPEED
# define MOUSEKEY_DECELERATED_SPEED 400
#endif // !MOUSEKEY_DECELERATED_SPEED
#endif // !MOUSEKEY_DECELERATED_SPEED
#ifndef MOUSEKEY_ACCELERATED_SPEED
# define MOUSEKEY_ACCELERATED_SPEED 3000
#endif // !MOUSEKEY_ACCELERATED_SPEED
#endif // !MOUSEKEY_ACCELERATED_SPEED
/* Mouse scroll config. */
#ifndef MOUSEKEY_WHEEL_DELAY
# define MOUSEKEY_WHEEL_DELAY 15
#endif // !MOUSEKEY_WHEEL_DELAY
#endif // !MOUSEKEY_WHEEL_DELAY
#ifndef MOUSEKEY_WHEEL_DELTA
# define MOUSEKEY_WHEEL_DELTA 1
#endif // !MOUSEKEY_WHEEL_DELTA
#endif // !MOUSEKEY_WHEEL_DELTA
#ifndef MOUSEKEY_WHEEL_INTERVAL
# define MOUSEKEY_WHEEL_INTERVAL 50
#endif // !MOUSEKEY_WHEEL_INTERVAL
#endif // !MOUSEKEY_WHEEL_INTERVAL
#ifndef MOUSEKEY_WHEEL_MAX_SPEED
# define MOUSEKEY_WHEEL_MAX_SPEED 8
#endif // !MOUSEKEY_WHEEL_MAX_SPEED
#endif // !MOUSEKEY_WHEEL_MAX_SPEED
#ifndef MOUSEKEY_WHEEL_TIME_TO_MAX
# define MOUSEKEY_WHEEL_TIME_TO_MAX 80
#endif // !MOUSEKEY_WHEEL_TIME_TO_MAX
#endif // !MOUSEKEY_WHEEL_TIME_TO_MAX
#ifndef MOUSEKEY_WHEEL_INITIAL_MOVEMENTS
# define MOUSEKEY_WHEEL_INITIAL_MOVEMENTS 8
#endif // !MOUSEKEY_WHEEL_INITIAL_MOVEMENTS
#endif // !MOUSEKEY_WHEEL_INITIAL_MOVEMENTS
#ifndef MOUSEKEY_WHEEL_BASE_MOVEMENTS
# define MOUSEKEY_WHEEL_BASE_MOVEMENTS 48
#endif // !MOUSEKEY_WHEEL_BASE_MOVEMENTS
#endif // !MOUSEKEY_WHEEL_BASE_MOVEMENTS
#ifndef MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS
# define MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS 48
#endif // !MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS
#endif // !MOUSEKEY_WHEEL_ACCELERATED_MOVEMENTS
#ifndef MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS
# define MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS 8
#endif // !MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS
#endif // !MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS

53
keyboards/bastardkb/charybdis/readme.md
View File

@ -18,33 +18,32 @@ Check out the [keyboard build guides](https://docs.bastardkb.com) for the Charyb
## Building the firmware
### Charybdis (4x6)
**You must specify the shield version when compiling/flashing the firmware.**
The template is:
```shell
qmk compile -kb bastardkb/charybdis/{LAYOUT}/{VERSION}/elitec -km {KEYMAP}
```
See below for populated commands per layout
The `default` keymap is inspired from the original [Dactyl Manuform](../../handwired/dactyl_manuform) layout.
```shell
qmk compile -kb bastardkb/charybdis/4x6 -km default
```
Check out the `via` layout if you're looking for VIA support.
Check out the `via` layout if you're looking for VIA support:
### Charybdis (4x6)
```shell
qmk compile -kb bastardkb/charybdis/4x6 -km via
```
| Shield Version | default | via |
|----------------|-----------------------------------------------------------------|-----------------------------------------------------------------|
| v1 | `qmk compile -kb bastardkb/charybdis/4x6/v1/elitec -km default` | `qmk compile -kb bastardkb/charybdis/4x6/v1/elitec -km via` |
| v2 | `qmk compile -kb bastardkb/charybdis/4x6/v2/elitec -km default` | `qmk compile -kb bastardkb/charybdis/4x6/v2/elitec -km via` |
### Charybdis (3x5)
The `default` keymap is inspired from the original [Dactyl Manuform](../../handwired/dactyl_manuform) layout.
```shell
qmk compile -kb bastardkb/charybdis/3x5 -km default
```
Check out the `via` layout if you're looking for VIA support:
```shell
qmk compile -kb bastardkb/charybdis/3x5 -km via
```
| Shield Version | default | via |
|----------------|-----------------------------------------------------------------|-----------------------------------------------------------------|
| v1 | `qmk compile -kb bastardkb/charybdis/3x5/v1/elitec -km default` | `qmk compile -kb bastardkb/charybdis/3x5/v1/elitec -km via` |
| v2 | `qmk compile -kb bastardkb/charybdis/3x5/v2/elitec -km default` | `qmk compile -kb bastardkb/charybdis/3x5/v2/elitec -km via` |
## Customizing the firmware
@ -73,7 +72,7 @@ Drag-scroll enables scrolling with the trackball. When drag-scroll is enabled, t
Call `charybdis_set_pointer_dragscroll_enabled(bool enable)` to enable/disable drag-scroll.
`charybdis_get_pointer_dragscroll_enabled()` returns whether sniping mode is currently enabled.
`charybdis_get_pointer_dragscroll_enabled()` returns whether drag-scroll mode is currently enabled.
To invert the horizontal scrolling direction, define `CHARYBDIS_DRAGSCROLL_REVERSE_X`:
@ -114,20 +113,6 @@ This behavior can be further customized with the following defines:
#define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100
```
### Acceleration
By default, the pointer's movements are linear. To enable acceleration, add the following define:
```c
#define CHARYBDIS_POINTER_ACCELERATION_ENABLE
```
The acceleration factor can be further tune _via_ the `CHARYBDIS_POINTER_ACCELERATION_FACTOR`:
```c
#define CHARYBDIS_POINTER_ACCELERATION_FACTOR 24
```
### Custom keycodes
The Charybdis firmware defines a number of keycodes to leverage its features, namely:

49
keyboards/bastardkb/dilemma/config.h Normal file
View File

@ -0,0 +1,49 @@
/*
* Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* Key matrix configuration. */
#define MATRIX_ROWS 8 // Rows are doubled-up.
#define MATRIX_COLS 5
#define DIODE_DIRECTION ROW2COL
// Set 0 if debouncing isn't needed.
#define DEBOUNCE 5
/* Pointing device configuration. */
// Enable use of pointing device on slave split.
#define SPLIT_POINTING_ENABLE
// Pointing device is on the right split.
#define POINTING_DEVICE_RIGHT
// Limits the frequency that the sensor is polled for motion.
#define POINTING_DEVICE_TASK_THROTTLE_MS 10
// Adjust trackpad rotation.
#define POINTING_DEVICE_ROTATION_90
// Configure for the Cirque model used on the Dilemma.
#define CIRQUE_PINNACLE_DIAMETER_MM 35
#define CIRQUE_PINNACLE_CURVED_OVERLAY

326
keyboards/bastardkb/dilemma/dilemma.c Normal file
View File

@ -0,0 +1,326 @@
/*
* Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna)
* Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Publicw License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "dilemma.h"
#ifdef CONSOLE_ENABLE
# include "print.h"
#endif // CONSOLE_ENABLE
#ifdef POINTING_DEVICE_ENABLE
# ifndef DILEMMA_MINIMUM_DEFAULT_DPI
# define DILEMMA_MINIMUM_DEFAULT_DPI 400
# endif // DILEMMA_MINIMUM_DEFAULT_DPI
# ifndef DILEMMA_DEFAULT_DPI_CONFIG_STEP
# define DILEMMA_DEFAULT_DPI_CONFIG_STEP 200
# endif // DILEMMA_DEFAULT_DPI_CONFIG_STEP
# ifndef DILEMMA_MINIMUM_SNIPING_DPI
# define DILEMMA_MINIMUM_SNIPING_DPI 200
# endif // DILEMMA_MINIMUM_SNIPING_DPI
# ifndef DILEMMA_SNIPING_DPI_CONFIG_STEP
# define DILEMMA_SNIPING_DPI_CONFIG_STEP 100
# endif // DILEMMA_SNIPING_DPI_CONFIG_STEP
// Fixed DPI for drag-scroll.
# ifndef DILEMMA_DRAGSCROLL_DPI
# define DILEMMA_DRAGSCROLL_DPI 100
# endif // DILEMMA_DRAGSCROLL_DPI
# ifndef DILEMMA_DRAGSCROLL_BUFFER_SIZE
# define DILEMMA_DRAGSCROLL_BUFFER_SIZE 6
# endif // !DILEMMA_DRAGSCROLL_BUFFER_SIZE
typedef union {
uint8_t raw;
struct {
uint8_t pointer_default_dpi : 4; // 16 steps available.
uint8_t pointer_sniping_dpi : 2; // 4 steps available.
bool is_dragscroll_enabled : 1;
bool is_sniping_enabled : 1;
} __attribute__((packed));
} dilemma_config_t;
static dilemma_config_t g_dilemma_config = {0};
/**
* \brief Set the value of `config` from EEPROM.
*
* Note that `is_dragscroll_enabled` and `is_sniping_enabled` are purposefully
* ignored since we do not want to persist this state to memory. In practice,
* this state is always written to maximize write-performances. Therefore, we
* explicitly set them to `false` in this function.
*/
static void read_dilemma_config_from_eeprom(dilemma_config_t* config) {
config->raw = eeconfig_read_kb() & 0xff;
config->is_dragscroll_enabled = false;
config->is_sniping_enabled = false;
}
/**
* \brief Save the value of `config` to eeprom.
*
* Note that all values are written verbatim, including whether drag-scroll
* and/or sniper mode are enabled. `read_dilemma_config_from_eeprom(…)`
* resets these 2 values to `false` since it does not make sense to persist
* these across reboots of the board.
*/
static void write_dilemma_config_to_eeprom(dilemma_config_t* config) {
eeconfig_update_kb(config->raw);
}
/** \brief Return the current value of the pointer's default DPI. */
static uint16_t get_pointer_default_dpi(dilemma_config_t* config) {
return (uint16_t)config->pointer_default_dpi * DILEMMA_DEFAULT_DPI_CONFIG_STEP + DILEMMA_MINIMUM_DEFAULT_DPI;
}
/** \brief Return the current value of the pointer's sniper-mode DPI. */
static uint16_t get_pointer_sniping_dpi(dilemma_config_t* config) {
return (uint16_t)config->pointer_sniping_dpi * DILEMMA_SNIPING_DPI_CONFIG_STEP + DILEMMA_MINIMUM_SNIPING_DPI;
}
/** \brief Set the appropriate DPI for the input config. */
static void maybe_update_pointing_device_cpi(dilemma_config_t* config) {
if (config->is_dragscroll_enabled) {
pointing_device_set_cpi(DILEMMA_DRAGSCROLL_DPI);
} else if (config->is_sniping_enabled) {
pointing_device_set_cpi(get_pointer_sniping_dpi(config));
} else {
pointing_device_set_cpi(get_pointer_default_dpi(config));
}
}
/**
* \brief Update the pointer's default DPI to the next or previous step.
*
* Increases the DPI value if `forward` is `true`, decreases it otherwise.
* The increment/decrement steps are equal to DILEMMA_DEFAULT_DPI_CONFIG_STEP.
*/
static void step_pointer_default_dpi(dilemma_config_t* config, bool forward) {
config->pointer_default_dpi += forward ? 1 : -1;
maybe_update_pointing_device_cpi(config);
}
/**
* \brief Update the pointer's sniper-mode DPI to the next or previous step.
*
* Increases the DPI value if `forward` is `true`, decreases it otherwise.
* The increment/decrement steps are equal to DILEMMA_SNIPING_DPI_CONFIG_STEP.
*/
static void step_pointer_sniping_dpi(dilemma_config_t* config, bool forward) {
config->pointer_sniping_dpi += forward ? 1 : -1;
maybe_update_pointing_device_cpi(config);
}
uint16_t dilemma_get_pointer_default_dpi(void) {
return get_pointer_default_dpi(&g_dilemma_config);
}
uint16_t dilemma_get_pointer_sniping_dpi(void) {
return get_pointer_sniping_dpi(&g_dilemma_config);
}
void dilemma_cycle_pointer_default_dpi_noeeprom(bool forward) {
step_pointer_default_dpi(&g_dilemma_config, forward);
}
void dilemma_cycle_pointer_default_dpi(bool forward) {
step_pointer_default_dpi(&g_dilemma_config, forward);
write_dilemma_config_to_eeprom(&g_dilemma_config);
}
void dilemma_cycle_pointer_sniping_dpi_noeeprom(bool forward) {
step_pointer_sniping_dpi(&g_dilemma_config, forward);
}
void dilemma_cycle_pointer_sniping_dpi(bool forward) {
step_pointer_sniping_dpi(&g_dilemma_config, forward);
write_dilemma_config_to_eeprom(&g_dilemma_config);
}
bool dilemma_get_pointer_sniping_enabled(void) {
return g_dilemma_config.is_sniping_enabled;
}
void dilemma_set_pointer_sniping_enabled(bool enable) {
g_dilemma_config.is_sniping_enabled = enable;
maybe_update_pointing_device_cpi(&g_dilemma_config);
}
bool dilemma_get_pointer_dragscroll_enabled(void) {
return g_dilemma_config.is_dragscroll_enabled;
}
void dilemma_set_pointer_dragscroll_enabled(bool enable) {
g_dilemma_config.is_dragscroll_enabled = enable;
maybe_update_pointing_device_cpi(&g_dilemma_config);
}
void pointing_device_init_kb(void) {
maybe_update_pointing_device_cpi(&g_dilemma_config);
pointing_device_init_user();
}
/**
* \brief Augment the pointing device behavior.
*
* Implement drag-scroll.
*/
static void pointing_device_task_dilemma(report_mouse_t* mouse_report) {
static int16_t scroll_buffer_x = 0;
static int16_t scroll_buffer_y = 0;
if (g_dilemma_config.is_dragscroll_enabled) {
# ifdef DILEMMA_DRAGSCROLL_REVERSE_X
scroll_buffer_x -= mouse_report->x;
# else
scroll_buffer_x += mouse_report->x;
# endif // DILEMMA_DRAGSCROLL_REVERSE_X
# ifdef DILEMMA_DRAGSCROLL_REVERSE_Y
scroll_buffer_y -= mouse_report->y;
# else
scroll_buffer_y += mouse_report->y;
# endif // DILEMMA_DRAGSCROLL_REVERSE_Y
mouse_report->x = 0;
mouse_report->y = 0;
if (abs(scroll_buffer_x) > DILEMMA_DRAGSCROLL_BUFFER_SIZE) {
mouse_report->h = scroll_buffer_x > 0 ? 1 : -1;
scroll_buffer_x = 0;
}
if (abs(scroll_buffer_y) > DILEMMA_DRAGSCROLL_BUFFER_SIZE) {
mouse_report->v = scroll_buffer_y > 0 ? 1 : -1;
scroll_buffer_y = 0;
}
}
}
report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) {
if (is_keyboard_master()) {
pointing_device_task_dilemma(&mouse_report);
mouse_report = pointing_device_task_user(mouse_report);
}
return mouse_report;
}
# if defined(POINTING_DEVICE_ENABLE) && !defined(NO_DILEMMA_KEYCODES)
/** \brief Whether SHIFT mod is enabled. */
static bool has_shift_mod(void) {
# ifdef NO_ACTION_ONESHOT
return mod_config(get_mods()) & MOD_MASK_SHIFT;
# else
return mod_config(get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT;
# endif // NO_ACTION_ONESHOT
}
# endif // POINTING_DEVICE_ENABLE && !NO_DILEMMA_KEYCODES
/**
* \brief Outputs the Dilemma configuration to console.
*
* Prints the in-memory configuration structure to console, for debugging.
* Includes:
* - raw value
* - drag-scroll: on/off
* - sniping: on/off
* - default DPI: internal table index/actual DPI
* - sniping DPI: internal table index/actual DPI
*/
static void debug_dilemma_config_to_console(dilemma_config_t* config) {
# ifdef CONSOLE_ENABLE
dprintf("(dilemma) process_record_kb: config = {\n"
"\traw = 0x%X,\n"
"\t{\n"
"\t\tis_dragscroll_enabled=%b\n"
"\t\tis_sniping_enabled=%b\n"
"\t\tdefault_dpi=0x%X (%ld)\n"
"\t\tsniping_dpi=0x%X (%ld)\n"
"\t}\n"
"}\n",
config->raw, config->is_dragscroll_enabled, config->is_sniping_enabled, config->pointer_default_dpi, get_pointer_default_dpi(config), config->pointer_sniping_dpi, get_pointer_sniping_dpi(config));
# endif // CONSOLE_ENABLE
}
bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
if (!process_record_user(keycode, record)) {
debug_dilemma_config_to_console(&g_dilemma_config);
return false;
}
# ifdef POINTING_DEVICE_ENABLE
# ifndef NO_DILEMMA_KEYCODES
switch (keycode) {
case POINTER_DEFAULT_DPI_FORWARD:
if (record->event.pressed) {
// Step backward if shifted, forward otherwise.
dilemma_cycle_pointer_default_dpi(/* forward= */ !has_shift_mod());
}
break;
case POINTER_DEFAULT_DPI_REVERSE:
if (record->event.pressed) {
// Step forward if shifted, backward otherwise.
dilemma_cycle_pointer_default_dpi(/* forward= */ has_shift_mod());
}
break;
case POINTER_SNIPING_DPI_FORWARD:
if (record->event.pressed) {
// Step backward if shifted, forward otherwise.
dilemma_cycle_pointer_sniping_dpi(/* forward= */ !has_shift_mod());
}
break;
case POINTER_SNIPING_DPI_REVERSE:
if (record->event.pressed) {
// Step forward if shifted, backward otherwise.
dilemma_cycle_pointer_sniping_dpi(/* forward= */ has_shift_mod());
}
break;
case SNIPING_MODE:
dilemma_set_pointer_sniping_enabled(record->event.pressed);
break;
case SNIPING_MODE_TOGGLE:
if (record->event.pressed) {
dilemma_set_pointer_sniping_enabled(!dilemma_get_pointer_sniping_enabled());
}
break;
case DRAGSCROLL_MODE:
dilemma_set_pointer_dragscroll_enabled(record->event.pressed);
break;
case DRAGSCROLL_MODE_TOGGLE:
if (record->event.pressed) {
dilemma_set_pointer_dragscroll_enabled(!dilemma_get_pointer_dragscroll_enabled());
}
break;
}
# endif // !NO_DILEMMA_KEYCODES
# endif // POINTING_DEVICE_ENABLE
debug_dilemma_config_to_console(&g_dilemma_config);
return true;
}
void eeconfig_init_kb(void) {
g_dilemma_config.raw = 0;
g_dilemma_config.pointer_default_dpi = 4;
write_dilemma_config_to_eeprom(&g_dilemma_config);
maybe_update_pointing_device_cpi(&g_dilemma_config);
eeconfig_init_user();
}
void matrix_init_kb(void) {
read_dilemma_config_from_eeprom(&g_dilemma_config);
matrix_init_user();
}
#endif // POINTING_DEVICE_ENABLE

134
keyboards/bastardkb/dilemma/dilemma.h Normal file
View File

@ -0,0 +1,134 @@
/**
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
// clang-format off
#define LAYOUT_split_3x5_2( \
k00, k01, k02, k03, k04, k44, k43, k42, k41, k40, \
k10, k11, k12, k13, k14, k54, k53, k52, k51, k50, \
k20, k21, k22, k23, k24, k64, k63, k62, k61, k60, \
k30, k32, k72, k70 \
) \
{ \
{ k00, k01, k02, k03, k04 }, \
{ k10, k11, k12, k13, k14 }, \
{ k20, k21, k22, k23, k24 }, \
{ k30, KC_NO, k32, KC_NO, KC_NO }, \
{ k40, k41, k42, k43, k44 }, \
{ k50, k51, k52, k53, k54 }, \
{ k60, k61, k62, k63, k64 }, \
{ k70, KC_NO, k72, KC_NO, KC_NO }, \
}
// clang-format on
#ifdef POINTING_DEVICE_ENABLE
# ifndef NO_DILEMMA_KEYCODES
enum dilemma_keycodes {
# ifdef VIA_ENABLE
POINTER_DEFAULT_DPI_FORWARD = USER00,
# else
POINTER_DEFAULT_DPI_FORWARD = SAFE_RANGE,
# endif // VIA_ENABLE
POINTER_DEFAULT_DPI_REVERSE,
POINTER_SNIPING_DPI_FORWARD,
POINTER_SNIPING_DPI_REVERSE,
SNIPING_MODE,
SNIPING_MODE_TOGGLE,
DRAGSCROLL_MODE,
DRAGSCROLL_MODE_TOGGLE,
DILEMMA_SAFE_RANGE,
};
# define DPI_MOD POINTER_DEFAULT_DPI_FORWARD
# define DPI_RMOD POINTER_DEFAULT_DPI_REVERSE
# define S_D_MOD POINTER_SNIPING_DPI_FORWARD
# define S_D_RMOD POINTER_SNIPING_DPI_REVERSE
# define SNIPING SNIPING_MODE
# define SNP_TOG SNIPING_MODE_TOGGLE
# define DRGSCRL DRAGSCROLL_MODE
# define DRG_TOG DRAGSCROLL_MODE_TOGGLE
# endif // !NO_DILEMMA_KEYCODES
/** \brief Return the current DPI value for the pointer's default mode. */
uint16_t dilemma_get_pointer_default_dpi(void);
/**
* \brief Update the pointer's default DPI to the next or previous step.
*
* Increases the DPI value if `forward` is `true`, decreases it otherwise.
* The increment/decrement steps are equal to DILEMMA_DEFAULT_DPI_CONFIG_STEP.
*
* The new value is persisted in EEPROM.
*/
void dilemma_cycle_pointer_default_dpi(bool forward);
/**
* \brief Same as `dilemma_cycle_pointer_default_dpi`, but do not write to
* EEPROM.
*
* This means that reseting the board will revert the value to the last
* persisted one.
*/
void dilemma_cycle_pointer_default_dpi_noeeprom(bool forward);
/** \brief Return the current DPI value for the pointer's sniper-mode. */
uint16_t dilemma_get_pointer_sniping_dpi(void);
/**
* \brief Update the pointer's sniper-mode DPI to the next or previous step.
*
* Increases the DPI value if `forward` is `true`, decreases it otherwise.
* The increment/decrement steps are equal to DILEMMA_SNIPING_DPI_CONFIG_STEP.
*
* The new value is persisted in EEPROM.
*/
void dilemma_cycle_pointer_sniping_dpi(bool forward);
/**
* \brief Same as `dilemma_cycle_pointer_sniping_dpi`, but do not write to
* EEPROM.
*
* This means that reseting the board will revert the value to the last
* persisted one.
*/
void dilemma_cycle_pointer_sniping_dpi_noeeprom(bool forward);
/** \brief Whether sniper-mode is enabled. */
bool dilemma_get_pointer_sniping_enabled(void);
/**
* \brief Enable/disable sniper mode.
*
* When sniper mode is enabled the dpi is reduced to slow down the pointer for
* more accurate movements.
*/
void dilemma_set_pointer_sniping_enabled(bool enable);
/** \brief Whether drag-scroll is enabled. */
bool dilemma_get_pointer_dragscroll_enabled(void);
/**
* \brief Enable/disable drag-scroll mode.
*
* When drag-scroll mode is enabled, horizontal and vertical pointer movements
* are translated into horizontal and vertical scroll movements.
*/
void dilemma_set_pointer_dragscroll_enabled(bool enable);
#endif // POINTING_DEVICE_ENABLE

37
keyboards/bastardkb/dilemma/elitec/config.h Normal file
View File

@ -0,0 +1,37 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ D4, C6, F5, F7 }
#define MATRIX_COL_PINS \
{ B4, B5, E6, D7, F6 }
/* Handedness. */
#define MASTER_RIGHT
// To use the handedness pin, resistors need to be installed on the PCB.
// If so, uncomment the following code, and undefine MASTER_RIGHT above.
//#define SPLIT_HAND_PIN F4
// If you've soldered the handedness pull-up on the upper side instead of the
// left one, uncomment the following line.
//#define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
/* serial.c configuration (for split keyboard). */
#define SOFT_SERIAL_PIN D2

6
keyboards/bastardkb/dilemma/elitec/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Dilemma Elite-C",
"usb": {
"device_version": "1.0.0",
},
}

5
keyboards/bastardkb/dilemma/elitec/rules.mk Normal file
View File

@ -0,0 +1,5 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu

46
keyboards/bastardkb/dilemma/info.json Normal file
View File

@ -0,0 +1,46 @@
{
"url": "https://bastardkb.com/dilemma",
"usb": {
"pid": "0x1835",
},
"layouts": {
"LAYOUT_split_3x5_2": {
"layout": [
{"label":"L00", "x":0, "y":0},
{"label":"L01", "x":1, "y":0},
{"label":"L02", "x":2, "y":0},
{"label":"L03", "x":3, "y":0},
{"label":"L04", "x":4, "y":0},
{"label":"R00", "x":11, "y":0},
{"label":"R01", "x":12, "y":0},
{"label":"R02", "x":13, "y":0},
{"label":"R03", "x":14, "y":0},
{"label":"R04", "x":15, "y":0},
{"label":"L10", "x":0, "y":1},
{"label":"L11", "x":1, "y":1},
{"label":"L12", "x":2, "y":1},
{"label":"L13", "x":3, "y":1},
{"label":"L14", "x":4, "y":1},
{"label":"R10", "x":11, "y":1},
{"label":"R11", "x":12, "y":1},
{"label":"R12", "x":13, "y":1},
{"label":"R13", "x":14, "y":1},
{"label":"R14", "x":15, "y":1},
{"label":"L20", "x":0, "y":2},
{"label":"L21", "x":1, "y":2},
{"label":"L22", "x":2, "y":2},
{"label":"L23", "x":3, "y":2},
{"label":"L24", "x":4, "y":2},
{"label":"R20", "x":11, "y":2},
{"label":"R21", "x":12, "y":2},
{"label":"R22", "x":13, "y":2},
{"label":"R23", "x":14, "y":2},
{"label":"R24", "x":15, "y":2},
{"label":"L30", "x":4, "y":3},
{"label":"L32", "x":5, "y":3},
{"label":"R32", "x":10, "y":3},
{"label":"R30", "x":11, "y":3}
]
}
}
}

3
keyboards/bastardkb/dilemma/keymaps/bstiq/README.md Normal file
View File

@ -0,0 +1,3 @@
# Dilemma @bstiq keymap
Inspired from Miryoku, using home-rows.

153
keyboards/bastardkb/dilemma/keymaps/bstiq/config.h Normal file
View File

@ -0,0 +1,153 @@
/**
* Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#ifdef VIA_ENABLE
/* Via configuration. */
# define DYNAMIC_KEYMAP_LAYER_COUNT 8
#endif // VIA_ENABLE
/**
* Configure the global tapping term (default: 200ms).
* If you have a lot of accidental mod activations, crank up the tapping term.
*
* See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
*/
#ifndef TAPPING_TERM
# define TAPPING_TERM 160
#endif // TAPPING_TERM
// disable trackpad taps
// #define CIRQUE_PINNACLE_TAPPING_TERM 0
/**
* Enable rapid switch from tap to hold. Disable auto-repeat when pressing key
* twice, except for one-shot keys.
*
* See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold
*/
#define TAPPING_FORCE_HOLD
/*
* Tap-or-Hold decision modes.
*
* Note that the following flags behave differently when combined (ie. when 2 or
* more are enabled).
*
* See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold
* decision modes.
*/
/**
* Faster tap-hold trigger.
*
* Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
* Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae
* With `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
* Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e
*
* See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold
*/
#define PERMISSIVE_HOLD
/**
* Prevent normal rollover on alphas from accidentally triggering mods.
*
* Ignores key presses that interrupt a mod-tap. Must-have for Home Row mod.
*
* Without `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
* Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ Mod+e
* With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
* Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ ae
*
* See docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt
*/
#define IGNORE_MOD_TAP_INTERRUPT
/** Dilemma-specific features. */
#ifdef POINTING_DEVICE_ENABLE
// Flip horizontal direction for drag-scroll.
# define DILEMMA_DRAGSCROLL_REVERSE_X
// #define DILEMMA_DRAGSCROLL_REVERSE_Y
#endif // POINTING_DEVICE_ENABLE
/** RGB Matrix. */
#ifdef RGB_MATRIX_ENABLE
// Enable all animations on ARM boards since they have plenty of memory
// available for it.
# define ENABLE_RGB_MATRIX_ALPHAS_MODS
# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_BREATHING
# define ENABLE_RGB_MATRIX_BAND_SAT
# define ENABLE_RGB_MATRIX_BAND_VAL
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
# define ENABLE_RGB_MATRIX_CYCLE_ALL
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
# define ENABLE_RGB_MATRIX_DUAL_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
# define ENABLE_RGB_MATRIX_RAINDROPS
# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# define ENABLE_RGB_MATRIX_HUE_BREATHING
# define ENABLE_RGB_MATRIX_HUE_PENDULUM
# define ENABLE_RGB_MATRIX_HUE_WAVE
# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define ENABLE_RGB_MATRIX_SPLASH
# define ENABLE_RGB_MATRIX_MULTISPLASH
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
// Limit maximum brightness to keep power consumption reasonable, and avoid
// disconnects.
# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
// Rainbow swirl as startup mode.
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
// Slow swirl at startup.
# define RGB_MATRIX_STARTUP_SPD 32
// Startup values.
# define RGB_MATRIX_STARTUP_HUE 0
# define RGB_MATRIX_STARTUP_SAT 255
# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
#endif // RGB_MATRIX_ENABLE

224
keyboards/bastardkb/dilemma/keymaps/bstiq/keymap.c Normal file
View File

@ -0,0 +1,224 @@
/**
* Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com>
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum bstiq_layers {
LAYER_BASE = 0,
LAYER_MBO,
LAYER_MEDIA,
LAYER_NAV,
LAYER_MOUSE,
LAYER_SYM,
LAYER_NUM,
LAYER_FUN,
};
// Automatically enable sniping when the mouse layer is on.
#define DILEMMA_AUTO_SNIPING_ON_LAYER LAYER_MOUSE
#define BSP_NAV LT(LAYER_NAV, KC_BSPC)
#define ENT_MBO LT(LAYER_MBO, KC_ENT)
#define TAB_MED LT(LAYER_MEDIA, KC_TAB)
#define ESC_SYM LT(LAYER_SYM, KC_ESC)
#define SPC_NUM LT(LAYER_NUM, KC_SPC)
#define SPC_MBO LT(LAYER_MBO, KC_SPC)
#define MOUSE(KC) LT(LAYER_MOUSE, KC)
#define USR_RDO KC_AGAIN
#define USR_PST S(KC_INS)
#define USR_CPY C(KC_INS)
#define USR_CUT S(KC_DEL)
#define USR_UND KC_UNDO
#define MS_L KC_MS_LEFT
#define MS_R KC_MS_RIGHT
#define MS_D KC_MS_DOWN
#define MS_U KC_MS_UP
#define WH_L KC_MS_WH_LEFT
#define WH_R KC_MS_WH_RIGHT
#define WH_D KC_MS_WH_DOWN
#define WH_U KC_MS_WH_UP
// clang-format off
/** Convenience macro. */
#define _KC_LAYOUT_wrapper( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \
...) \
KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, \
KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, \
KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, \
__VA_ARGS__
#define KC_LAYOUT_wrapper(...) _KC_LAYOUT_wrapper(__VA_ARGS__)
/** Base layer with BÉPO layout. */
#define LAYOUT_LAYER_BASE_BEPO KC_LAYOUT_wrapper( \
B, W, P, O, QUOT, DOT, V, D, L, J, \
A, U, I, E, COMM, C, T, S, R, N, \
Z, Y, X, SLSH, K, M, Q, G, H, F, \
SPC_MBO, TAB_MED, ESC_SYM, SPC_NUM)
/** Convenience key shorthands. */
#define U_NA KC_NO // Present but not available for use.
#define U_NU KC_NO // Available but not used.
/** Convenience row shorthands. */
#define ________________HOME_ROW_NA________________ U_NA, U_NA, U_NA, U_NA, U_NA
#define ______________HOME_ROW_GASC_L______________ KC_LGUI, KC_LALT, KC_LSFT, KC_LCTL, U_NA
#define ______________HOME_ROW_ALGR_L______________ U_NA, KC_ALGR, U_NA, U_NA, U_NA
#define ______________HOME_ROW_GASC_R______________ U_NA, KC_LCTL, KC_LSFT, KC_LALT, KC_LGUI
#define ______________HOME_ROW_ALGR_R______________ U_NA, U_NA, U_NA, KC_ALGR, U_NA
/** Layers. */
// Buttons.
#define LAYOUT_LAYER_MBO \
________________HOME_ROW_NA________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
______________HOME_ROW_GASC_L______________, KC_BSPC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, \
KC_BTN3, KC_ALGR, KC_BTN2, KC_BTN1, U_NA, KC_DEL, KC_HOME, KC_PGDN, KC_PGUP, KC_END, \
U_NA, U_NA, KC_ENT, KC_ENT
// Media.
#define LAYOUT_LAYER_MEDIA \
________________HOME_ROW_NA________________, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
______________HOME_ROW_GASC_L______________, U_NU, MS_L, MS_D, MS_U, MS_R, \
______________HOME_ROW_ALGR_L______________, U_NU, WH_L, WH_D, WH_U, WH_R, \
U_NA, U_NA, KC_BTN1, KC_BTN3
// Navigation.
#define LAYOUT_LAYER_NAV \
________________HOME_ROW_NA________________, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, \
______________HOME_ROW_GASC_L______________, U_NU, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, \
______________HOME_ROW_ALGR_L______________, U_NU, U_NU, U_NU, U_NU, U_NU, \
U_NA, U_NA, KC_MSTP, KC_MPLY
// Mouse.
#define LAYOUT_LAYER_MOUSE \
S_D_MOD, USR_PST, USR_CPY, USR_CUT, USR_UND, USR_RDO, USR_PST, USR_CPY, USR_CUT, USR_UND, \
DPI_MOD, DRGSCRL, KC_LSFT, DRGSCRL, _______, U_NU, MS_L, MS_D, MS_U, MS_R, \
USR_RDO, USR_PST, USR_CPY, KC_BTN3, USR_UND, U_NU, WH_L, WH_D, WH_U, WH_R, \
KC_BTN1, KC_BTN2, KC_BTN1, KC_BTN3
// Symbols.
#define LAYOUT_LAYER_SYM \
KC_LCBR, KC_AMPR, KC_ASTR, KC_LPRN, KC_RCBR, ________________HOME_ROW_NA________________, \
KC_COLN, KC_DLR, KC_PERC, KC_CIRC, KC_PLUS, ______________HOME_ROW_GASC_R______________, \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_MINS, ______________HOME_ROW_ALGR_R______________, \
KC_RPRN, KC_LPRN, U_NA, U_NA
// Numerals.
#define LAYOUT_LAYER_NUM \
KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, ________________HOME_ROW_NA________________, \
KC_SCLN, KC_4, KC_5, KC_6, KC_EQL, ______________HOME_ROW_GASC_R______________, \
KC_GRV, KC_1, KC_2, KC_3, KC_UNDS, ______________HOME_ROW_ALGR_R______________, \
KC_0, KC_MINS, U_NA, U_NA
// Function keys.
#define LAYOUT_LAYER_FUN \
KC_F12, KC_F7, KC_F8, KC_F9, KC_PSCR, ________________HOME_ROW_NA________________, \
KC_F11, KC_F4, KC_F5, KC_F6, KC_SLCK, ______________HOME_ROW_GASC_R______________, \
KC_F10, KC_F1, KC_F2, KC_F3, KC_PAUS, ______________HOME_ROW_ALGR_R______________,\
KC_APP, KC_TAB, U_NA, U_NA
/**
* Add Home Row mod to a layout.
*
* Expects a 10-key per row layout. Adds support for GASC (Gui, Alt, Shift, Ctl)
* home row. The layout passed in parameter must contain at least 20 keycodes.
*
* This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.:
*
* HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO)
*/
#define _HOME_ROW_MOD_GASC( \
L00, L01, L02, L03, L04, R05, R06, R07, R08, R09, \
L10, L11, L12, L13, L14, R15, R16, R17, R18, R19, \
...) \
L00, L01, L02, L03, L04, \
R05, R06, R07, R08, R09, \
LGUI_T(L10), LALT_T(L11), LSFT_T(L12), LCTL_T(L13), L14, \
R15, RCTL_T(R16), RSFT_T(R17), LALT_T(R18), RGUI_T(R19), \
__VA_ARGS__
#define HOME_ROW_MOD_GASC(...) _HOME_ROW_MOD_GASC(__VA_ARGS__)
/**
* Add mouse layer keys to a layout.
*
* Expects a 10-key per row layout. The layout passed in parameter must contain
* at least 30 keycodes.
*
* This is meant to be used with `LAYOUT_LAYER_BASE_BEPO` defined above, eg.:
*
* MOUSE_MOD(LAYOUT_LAYER_BASE_BEPO)
*/
#define _MOUSE_MOD( \
L00, L01, L02, L03, L04, R05, R06, R07, R08, R09, \
L10, L11, L12, L13, L14, R15, R16, R17, R18, R19, \
L20, L21, L22, L23, L24, R25, R26, R27, R28, R29, \
...) \
L00, L01, L02, L03, L04, \
R05, R06, R07, R08, R09, \
L10, L11, L12, L13, L14, \
R15, R16, R17, R18, R19, \
L20, MOUSE(L21), L22, L23, L24, \
R25, R26, R27, R28, MOUSE(R29), \
__VA_ARGS__
#define MOUSE_MOD(...) _MOUSE_MOD(__VA_ARGS__)
#define LAYOUT_wrapper(...) LAYOUT_split_3x5_2(__VA_ARGS__)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[LAYER_BASE] = LAYOUT_wrapper(
MOUSE_MOD(HOME_ROW_MOD_GASC(LAYOUT_LAYER_BASE_BEPO))
),
[LAYER_MBO] = LAYOUT_wrapper(LAYOUT_LAYER_MBO),
[LAYER_MEDIA] = LAYOUT_wrapper(LAYOUT_LAYER_MEDIA),
[LAYER_NAV] = LAYOUT_wrapper(LAYOUT_LAYER_NAV),
[LAYER_MOUSE] = LAYOUT_wrapper(LAYOUT_LAYER_MOUSE),
[LAYER_SYM] = LAYOUT_wrapper(LAYOUT_LAYER_SYM),
[LAYER_NUM] = LAYOUT_wrapper(LAYOUT_LAYER_NUM),
[LAYER_FUN] = LAYOUT_wrapper(LAYOUT_LAYER_FUN),
};
// clang-format on
#if defined(POINTING_DEVICE_ENABLE) && defined(DILEMMA_AUTO_SNIPING_ON_LAYER)
layer_state_t layer_state_set_kb(layer_state_t state) {
state = layer_state_set_user(state);
dilemma_set_pointer_sniping_enabled(layer_state_cmp(state, DILEMMA_AUTO_SNIPING_ON_LAYER));
return state;
}
#endif // POINTING_DEVICE_ENABLE && DILEMMA_AUTO_SNIPING_ON_LAYER
#ifdef RGB_MATRIX_ENABLE
// Forward-declare this helper function since it is defined in rgb_matrix.c.
void rgb_matrix_update_pwm_buffers(void);
#endif
void shutdown_user(void) {
#ifdef RGBLIGHT_ENABLE
rgblight_enable_noeeprom();
rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT);
rgblight_setrgb_red();
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
rgb_matrix_set_color_all(RGB_RED);
rgb_matrix_update_pwm_buffers();
#endif // RGB_MATRIX_ENABLE
}

84
keyboards/bastardkb/dilemma/keymaps/default/keymap.c Normal file
View File

@ -0,0 +1,84 @@
/**
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum charybdis_keymap_layers {
LAYER_BASE = 0,
LAYER_NAV,
LAYER_SYM,
LAYER_NUM,
};
#define NAV MO(LAYER_NAV)
#define SYM MO(LAYER_SYM)
// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[LAYER_BASE] = LAYOUT_split_3x5_2(
// ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
// ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
NAV, CAPSWRD, KC_SPC, SYM
// ╰──────────────────╯ ╰──────────────────╯
),
[LAYER_NAV] = LAYOUT_split_3x5_2(
// ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
KC_TAB, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU, XXXXXXX, KC_HOME, KC_UP, KC_END, KC_DEL,
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
KC_LSFT, KC_LCTL, KC_LALT, KC_RGUI, KC_VOLD, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_BSPC,
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
QK_BOOT, EEP_RST, KC_MPRV, KC_MNXT, KC_MPLY, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, KC_ENT,
// ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
_______, KC_LSFT, KC_SPC, _______
// ╰──────────────────╯ ╰──────────────────╯
),
[LAYER_SYM] = LAYOUT_split_3x5_2(
// ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
KC_ESC, KC_LBRC, KC_LCBR, KC_LPRN, KC_TILD, KC_CIRC, KC_RPRN, KC_RCBR, KC_RBRC, KC_GRV,
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
KC_MINS, KC_ASTR, KC_EQL, KC_UNDS, KC_DLR, KC_HASH, KC_RGUI, KC_RALT, KC_RCTL, KC_RSFT,
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
KC_PLUS, KC_PIPE, KC_AT, KC_SLSH, KC_PERC, _______, KC_BSLS, KC_AMPR, KC_QUES, KC_EXLM,
// ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
_______, KC_LSFT, KC_SPC, _______
// ╰──────────────────╯ ╰──────────────────╯
),
[LAYER_NUM] = LAYOUT_split_3x5_2(
// ╭─────────────────────────────────────────────╮ ╭─────────────────────────────────────────────╮
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, KC_F11, KC_F12, KC_RGUI, KC_RALT, KC_RCTL, KC_RSFT,
// ├─────────────────────────────────────────────┤ ├─────────────────────────────────────────────┤
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
// ╰─────────────────────────────────────────────┤ ├─────────────────────────────────────────────╯
_______, KC_LSFT, KC_SPC, _______
// ╰──────────────────╯ ╰──────────────────╯
),
};
// clang-format on
layer_state_t layer_state_set_user(layer_state_t state) {
return update_tri_layer_state(state, LAYER_NAV, LAYER_SYM, LAYER_NUM);
}

14
keyboards/bastardkb/dilemma/readme.md Normal file
View File

@ -0,0 +1,14 @@
# Dilemma
A very small keyboard made for ergonomic enthusiasts.
- Keyboard Maintainer: [Bastard Keyboards](https://github.com/Bastardkb/)
- Hardware Supported: elite-C V4, Splinky
- Hardware Availability: [Bastardkb.com](https://bastardkb.com/)
Make example for this keyboard (after setting up your build environment):
make bastardkb/dilemma/elitec:default
make bastardkb/dilemma/splinky:default
See the [keyboard build instructions](http://docs.bastardkb.com/)

23
keyboards/bastardkb/dilemma/rules.mk Normal file
View File

@ -0,0 +1,23 @@
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
AUDIO_SUPPORTED = no # Audio is not supported
RGB_MATRIX_SUPPORTED = no # RGB matrix is supported and enabled by default
RGBLIGHT_SUPPORTED = no # RGB underglow is supported, but not enabled by default
RGB_MATRIX_ENABLE = no # Enable keyboard RGB matrix functionality
POINTING_DEVICE_ENABLE = yes
POINTING_DEVICE_DRIVER = cirque_pinnacle_i2c
SPLIT_KEYBOARD = yes
LAYOUTS = split_3x5_2

46
keyboards/bastardkb/dilemma/splinky/config.h Normal file
View File

@ -0,0 +1,46 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Key matrix configuration. */
#define MATRIX_ROW_PINS \
{ GP4, GP5, GP28, GP26 }
#define MATRIX_COL_PINS \
{ GP8, GP9, GP7, GP6, GP27 }
/* Handedness. */
#define MASTER_RIGHT
// To use the handedness pin, resistors need to be installed on the PCB.
// If so, uncomment the following code, and undefine MASTER_RIGHT above.
//#define SPLIT_HAND_PIN GP29
// If you've soldered the handedness pull-up on the upper side instead of the
// left one, uncomment the following line.
//#define SPLIT_HAND_PIN_LOW_IS_LEFT // High -> right, Low -> left.
/* serial.c configuration (for split keyboard). */
#define SOFT_SERIAL_PIN GP1
/* CRC. */
#define CRC8_USE_TABLE
#define CRC8_OPTIMIZE_SPEED
/* Reset. */
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

21
keyboards/bastardkb/dilemma/splinky/halconf.h Normal file
View File

@ -0,0 +1,21 @@
/* Copyright 2022 QMK
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define HAL_USE_I2C TRUE
#include_next "halconf.h"

6
keyboards/bastardkb/dilemma/splinky/info.json Normal file
View File

@ -0,0 +1,6 @@
{
"keyboard_name": "Dilemma Splinky",
"usb": {
"device_version": "1.0.0",
},
}

23
keyboards/bastardkb/dilemma/splinky/mcuconf.h Normal file
View File

@ -0,0 +1,23 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include_next "mcuconf.h"
#undef RP_I2C_USE_I2C1
#define RP_I2C_USE_I2C1 TRUE

9
keyboards/bastardkb/dilemma/splinky/rules.mk Normal file
View File

@ -0,0 +1,9 @@
# MCU name
MCU = RP2040
# Bootloader selection
BOOTLOADER = rp2040
# RP2040-specific options
PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
SERIAL_DRIVER = vendor

32
keyboards/bastardkb/dilemma/splinky/splinky.c Normal file
View File

@ -0,0 +1,32 @@
/*
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "quantum.h"
// Forward declare RP2040 SDK declaration.
void gpio_init(uint gpio);
void keyboard_pre_init_user(void) {
// Ensures that GP26 through GP29 are initialized as digital inputs (as
// opposed to analog inputs). These GPIOs are shared with A0 through A3,
// respectively. On RP2040-B2 and later, the digital inputs are disabled by
// default (see RP2040-E6).
gpio_init(GP26);
gpio_init(GP27);
gpio_init(GP28);
gpio_init(GP29);
}

8
keyboards/bastardkb/info.json Normal file
View File

@ -0,0 +1,8 @@
{
"url": "https://bastardkb.com",
"manufacturer": "Bastard Keyboards",
"maintainer": "Quentin Lebastard",
"usb": {
"vid": "0xA8F8",
},
}

Some files were not shown because too many files have changed in this diff Show More