Add STM32G431 and STM32G474 board definitions. (#11793)
* Add STM32G431 and STM32G474 board definitions. * Add docs.
This commit is contained in:
parent
c1b2e87e89
commit
620a946d01
|
@ -25,7 +25,7 @@
|
|||
},
|
||||
"processor": {
|
||||
"type": "string",
|
||||
"enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"]
|
||||
"enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "STM32G431", "STM32G474", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"]
|
||||
},
|
||||
"board": {
|
||||
"type": "string",
|
||||
|
|
|
@ -26,6 +26,10 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s
|
|||
* [STM32F0x2](https://www.st.com/en/microcontrollers-microprocessors/stm32f0x2.html)
|
||||
* [STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html)
|
||||
* [STM32F303](https://www.st.com/en/microcontrollers-microprocessors/stm32f303.html)
|
||||
* [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html)
|
||||
* [STM32F411](https://www.st.com/en/microcontrollers-microprocessors/stm32f411.html)
|
||||
* [STM32G431](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x1.html)
|
||||
* [STM32G474](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x4.html)
|
||||
|
||||
### NXP (Kinetis)
|
||||
|
||||
|
|
|
@ -31,6 +31,10 @@ QMK は十分な容量のフラッシュメモリを備えた USB 対応 AVR ま
|
|||
* [STM32F0x2](https://www.st.com/en/microcontrollers-microprocessors/stm32f0x2.html)
|
||||
* [STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html)
|
||||
* [STM32F303](https://www.st.com/en/microcontrollers-microprocessors/stm32f303.html)
|
||||
* [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html)
|
||||
* [STM32F411](https://www.st.com/en/microcontrollers-microprocessors/stm32f411.html)
|
||||
* [STM32G431](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x1.html)
|
||||
* [STM32G474](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x4.html)
|
||||
|
||||
### NXP (Kinetis)
|
||||
|
||||
|
|
|
@ -10,7 +10,7 @@ QMK_FIRMWARE = Path.cwd()
|
|||
MAX_KEYBOARD_SUBFOLDERS = 5
|
||||
|
||||
# Supported processor types
|
||||
CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411'
|
||||
CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411', 'STM32G431', 'STM32G474'
|
||||
LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None
|
||||
VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85'
|
||||
|
||||
|
|
|
@ -0,0 +1,9 @@
|
|||
# List of all the board related files.
|
||||
BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G431RB/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G431RB
|
||||
|
||||
# Shared variables
|
||||
ALLCSRC += $(BOARDSRC)
|
||||
ALLINC += $(BOARDINC)
|
|
@ -0,0 +1,23 @@
|
|||
/* Copyright 2018-2020 Nick Brassel (@tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here (page 175):
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
|
|
@ -0,0 +1,307 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32G4xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#ifndef MCUCONF_H
|
||||
#define MCUCONF_H
|
||||
|
||||
#define STM32G4xx_MCUCONF
|
||||
#define STM32G431_MCUCONF
|
||||
#define STM32G441_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_VOS STM32_VOS_RANGE1
|
||||
#define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0)
|
||||
#define STM32_PWR_CR3 (PWR_CR3_EIWF)
|
||||
#define STM32_PWR_CR4 (0U)
|
||||
#define STM32_HSI16_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLLRCLK
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI16
|
||||
#define STM32_PLLM_VALUE 4
|
||||
#define STM32_PLLN_VALUE 80
|
||||
#define STM32_PLLPDIV_VALUE 0
|
||||
#define STM32_PLLP_VALUE 7
|
||||
#define STM32_PLLQ_VALUE 8
|
||||
#define STM32_PLLR_VALUE 2
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV1
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV1
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_MCOPRE STM32_MCOPRE_DIV1
|
||||
#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK
|
||||
|
||||
/*
|
||||
* Peripherals clock sources.
|
||||
*/
|
||||
#define STM32_USART1SEL STM32_USART1SEL_SYSCLK
|
||||
#define STM32_USART2SEL STM32_USART2SEL_SYSCLK
|
||||
#define STM32_USART3SEL STM32_USART3SEL_SYSCLK
|
||||
#define STM32_UART4SEL STM32_UART4SEL_SYSCLK
|
||||
#define STM32_LPUART1SEL STM32_LPUART1SEL_PCLK1
|
||||
#define STM32_I2C1SEL STM32_I2C1SEL_PCLK1
|
||||
#define STM32_I2C2SEL STM32_I2C2SEL_PCLK1
|
||||
#define STM32_I2C3SEL STM32_I2C3SEL_PCLK1
|
||||
#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1
|
||||
#define STM32_SAI1SEL STM32_SAI1SEL_SYSCLK
|
||||
#define STM32_I2S23SEL STM32_I2S23SEL_SYSCLK
|
||||
#define STM32_FDCANSEL STM32_FDCANSEL_PCLK1
|
||||
#define STM32_CLK48SEL STM32_CLK48SEL_HSI48
|
||||
#define STM32_ADC12SEL STM32_ADC12SEL_PLLPCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK
|
||||
|
||||
/*
|
||||
* IRQ system settings.
|
||||
*/
|
||||
#define STM32_IRQ_EXTI0_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI1_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI2_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI3_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI4_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI5_9_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI10_15_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI164041_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI17_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI18_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI19_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI20_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI212229_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI30_32_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI33_PRIORITY 6
|
||||
|
||||
#define STM32_IRQ_FDCAN1_PRIORITY 10
|
||||
|
||||
#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_CC_PRIORITY 7
|
||||
#define STM32_IRQ_TIM2_PRIORITY 7
|
||||
#define STM32_IRQ_TIM3_PRIORITY 7
|
||||
#define STM32_IRQ_TIM4_PRIORITY 7
|
||||
#define STM32_IRQ_TIM6_PRIORITY 7
|
||||
#define STM32_IRQ_TIM7_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_UP_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_CC_PRIORITY 7
|
||||
|
||||
#define STM32_IRQ_USART1_PRIORITY 12
|
||||
#define STM32_IRQ_USART2_PRIORITY 12
|
||||
#define STM32_IRQ_USART3_PRIORITY 12
|
||||
#define STM32_IRQ_UART4_PRIORITY 12
|
||||
#define STM32_IRQ_LPUART1_PRIORITY 12
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_DUAL_MODE FALSE
|
||||
#define STM32_ADC_COMPACT_SAMPLES FALSE
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_USE_ADC2 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC2_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4
|
||||
#define STM32_ADC_ADC12_PRESC ADC_CCR_PRESC_DIV2
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#define STM32_CAN_USE_FDCAN1 FALSE
|
||||
|
||||
/*
|
||||
* DAC driver system settings.
|
||||
*/
|
||||
#define STM32_DAC_DUAL_MODE FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH2 FALSE
|
||||
#define STM32_DAC_USE_DAC3_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC3_CH2 FALSE
|
||||
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC3_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC3_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC3_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC3_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC3_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC3_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM6 FALSE
|
||||
#define STM32_GPT_USE_TIM7 FALSE
|
||||
#define STM32_GPT_USE_TIM8 FALSE
|
||||
#define STM32_GPT_USE_TIM15 FALSE
|
||||
#define STM32_GPT_USE_TIM16 FALSE
|
||||
#define STM32_GPT_USE_TIM17 FALSE
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_USE_I2C3 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C3_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C3_DMA_PRIORITY 3
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM8 FALSE
|
||||
#define STM32_ICU_USE_TIM15 FALSE
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_USE_TIM15 FALSE
|
||||
#define STM32_PWM_USE_TIM16 FALSE
|
||||
#define STM32_PWM_USE_TIM17 FALSE
|
||||
|
||||
/*
|
||||
* RTC driver system settings.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SDC driver system settings.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#define STM32_SERIAL_USE_LPUART1 FALSE
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* TRNG driver system settings.
|
||||
*/
|
||||
#define STM32_TRNG_USE_RNG1 FALSE
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USE_UART4 FALSE
|
||||
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_UART4_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 5
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 6
|
||||
|
||||
/*
|
||||
* WDG driver system settings.
|
||||
*/
|
||||
#define STM32_WDG_USE_IWDG FALSE
|
||||
|
||||
#endif /* MCUCONF_H */
|
|
@ -0,0 +1,9 @@
|
|||
# List of all the board related files.
|
||||
BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G474RE/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G474RE
|
||||
|
||||
# Shared variables
|
||||
ALLCSRC += $(BOARDSRC)
|
||||
ALLINC += $(BOARDINC)
|
|
@ -0,0 +1,30 @@
|
|||
/* Copyright 2020 Nick Brassel (tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef STM32_BOOTLOADER_DUAL_BANK
|
||||
# define STM32_BOOTLOADER_DUAL_BANK FALSE
|
||||
#endif
|
||||
|
||||
// To Enter bootloader from `RESET` keycode, you'll need to dedicate a GPIO to
|
||||
// charge an RC network on the BOOT0 pin.
|
||||
// See the QMK Discord's #hardware channel pins for an example circuit.
|
||||
// Insert these two lines into your keyboard's `config.h` file.
|
||||
// In the case below, PB7 is selected to charge.
|
||||
#if 0
|
||||
#define STM32_BOOTLOADER_DUAL_BANK TRUE
|
||||
#define STM32_BOOTLOADER_DUAL_BANK_GPIO B7
|
||||
#endif
|
|
@ -0,0 +1,372 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32G4xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#ifndef MCUCONF_H
|
||||
#define MCUCONF_H
|
||||
|
||||
#define STM32G4xx_MCUCONF
|
||||
#define STM32G473_MCUCONF
|
||||
#define STM32G483_MCUCONF
|
||||
#define STM32G474_MCUCONF
|
||||
#define STM32G484_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_VOS STM32_VOS_RANGE1
|
||||
#define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0)
|
||||
#define STM32_PWR_CR3 (PWR_CR3_EIWF)
|
||||
#define STM32_PWR_CR4 (0U)
|
||||
#define STM32_HSI16_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED FALSE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLLRCLK
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI16
|
||||
#define STM32_PLLM_VALUE 2
|
||||
#define STM32_PLLN_VALUE 40
|
||||
#define STM32_PLLPDIV_VALUE 0
|
||||
#define STM32_PLLP_VALUE 7
|
||||
#define STM32_PLLQ_VALUE 2
|
||||
#define STM32_PLLR_VALUE 2
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV1
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV1
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_MCOPRE STM32_MCOPRE_DIV1
|
||||
#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK
|
||||
|
||||
/*
|
||||
* Peripherals clock sources.
|
||||
*/
|
||||
#define STM32_USART1SEL STM32_USART1SEL_SYSCLK
|
||||
#define STM32_USART2SEL STM32_USART2SEL_SYSCLK
|
||||
#define STM32_USART3SEL STM32_USART3SEL_SYSCLK
|
||||
#define STM32_UART4SEL STM32_UART4SEL_SYSCLK
|
||||
#define STM32_UART5SEL STM32_UART5SEL_SYSCLK
|
||||
#define STM32_LPUART1SEL STM32_LPUART1SEL_PCLK1
|
||||
#define STM32_I2C1SEL STM32_I2C1SEL_PCLK1
|
||||
#define STM32_I2C2SEL STM32_I2C2SEL_PCLK1
|
||||
#define STM32_I2C3SEL STM32_I2C3SEL_PCLK1
|
||||
#define STM32_I2C4SEL STM32_I2C4SEL_PCLK1
|
||||
#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1
|
||||
#define STM32_SAI1SEL STM32_SAI1SEL_SYSCLK
|
||||
#define STM32_I2S23SEL STM32_I2S23SEL_SYSCLK
|
||||
#define STM32_FDCANSEL STM32_FDCANSEL_HSE
|
||||
#define STM32_CLK48SEL STM32_CLK48SEL_HSI48
|
||||
#define STM32_ADC12SEL STM32_ADC12SEL_PLLPCLK
|
||||
#define STM32_ADC345SEL STM32_ADC345SEL_PLLPCLK
|
||||
#define STM32_QSPISEL STM32_QSPISEL_SYSCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK
|
||||
|
||||
/*
|
||||
* IRQ system settings.
|
||||
*/
|
||||
#define STM32_IRQ_EXTI0_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI1_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI2_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI3_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI4_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI5_9_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI10_15_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI164041_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI17_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI18_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI19_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI20_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI212229_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI30_32_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI33_PRIORITY 6
|
||||
|
||||
#define STM32_IRQ_FDCAN1_PRIORITY 10
|
||||
#define STM32_IRQ_FDCAN2_PRIORITY 10
|
||||
#define STM32_IRQ_FDCAN3_PRIORITY 10
|
||||
|
||||
#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_CC_PRIORITY 7
|
||||
#define STM32_IRQ_TIM2_PRIORITY 7
|
||||
#define STM32_IRQ_TIM3_PRIORITY 7
|
||||
#define STM32_IRQ_TIM4_PRIORITY 7
|
||||
#define STM32_IRQ_TIM5_PRIORITY 7
|
||||
#define STM32_IRQ_TIM6_PRIORITY 7
|
||||
#define STM32_IRQ_TIM7_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_UP_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_CC_PRIORITY 7
|
||||
#define STM32_IRQ_TIM20_UP_PRIORITY 7
|
||||
#define STM32_IRQ_TIM20_CC_PRIORITY 7
|
||||
|
||||
#define STM32_IRQ_USART1_PRIORITY 12
|
||||
#define STM32_IRQ_USART2_PRIORITY 12
|
||||
#define STM32_IRQ_USART3_PRIORITY 12
|
||||
#define STM32_IRQ_UART4_PRIORITY 12
|
||||
#define STM32_IRQ_UART5_PRIORITY 12
|
||||
#define STM32_IRQ_LPUART1_PRIORITY 12
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_DUAL_MODE FALSE
|
||||
#define STM32_ADC_COMPACT_SAMPLES FALSE
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_USE_ADC2 FALSE
|
||||
#define STM32_ADC_USE_ADC3 FALSE
|
||||
#define STM32_ADC_USE_ADC4 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC2_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC3_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC4_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC3_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC4_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4
|
||||
#define STM32_ADC_ADC345_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4
|
||||
#define STM32_ADC_ADC12_PRESC ADC_CCR_PRESC_DIV2
|
||||
#define STM32_ADC_ADC345_PRESC ADC_CCR_PRESC_DIV2
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#define STM32_CAN_USE_FDCAN1 FALSE
|
||||
#define STM32_CAN_USE_FDCAN2 FALSE
|
||||
#define STM32_CAN_USE_FDCAN3 FALSE
|
||||
|
||||
/*
|
||||
* DAC driver system settings.
|
||||
*/
|
||||
#define STM32_DAC_DUAL_MODE FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH2 FALSE
|
||||
#define STM32_DAC_USE_DAC2_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC3_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC3_CH2 FALSE
|
||||
#define STM32_DAC_USE_DAC4_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC4_CH2 FALSE
|
||||
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC2_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC3_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC3_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC4_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC4_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC2_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC3_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC3_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC4_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC4_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC2_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC3_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC3_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC4_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC4_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM5 FALSE
|
||||
#define STM32_GPT_USE_TIM6 FALSE
|
||||
#define STM32_GPT_USE_TIM7 FALSE
|
||||
#define STM32_GPT_USE_TIM8 FALSE
|
||||
#define STM32_GPT_USE_TIM15 FALSE
|
||||
#define STM32_GPT_USE_TIM16 FALSE
|
||||
#define STM32_GPT_USE_TIM17 FALSE
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_USE_I2C3 FALSE
|
||||
#define STM32_I2C_USE_I2C4 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C3_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C4_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C3_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C4_DMA_PRIORITY 3
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM5 FALSE
|
||||
#define STM32_ICU_USE_TIM8 FALSE
|
||||
#define STM32_ICU_USE_TIM15 FALSE
|
||||
#define STM32_ICU_USE_TIM16 FALSE
|
||||
#define STM32_ICU_USE_TIM17 FALSE
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM5 FALSE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_USE_TIM15 FALSE
|
||||
#define STM32_PWM_USE_TIM16 FALSE
|
||||
#define STM32_PWM_USE_TIM17 FALSE
|
||||
#define STM32_PWM_USE_TIM20 FALSE
|
||||
|
||||
/*
|
||||
* RTC driver system settings.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SDC driver system settings.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#define STM32_SERIAL_USE_UART5 FALSE
|
||||
#define STM32_SERIAL_USE_LPUART1 FALSE
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_USE_SPI4 FALSE
|
||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI4_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI4_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* TRNG driver system settings.
|
||||
*/
|
||||
#define STM32_TRNG_USE_RNG1 FALSE
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USE_UART4 FALSE
|
||||
#define STM32_UART_USE_UART5 FALSE
|
||||
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_UART4_DMA_PRIORITY 0
|
||||
#define STM32_UART_UART5_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 5
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 5
|
||||
|
||||
/*
|
||||
* WDG driver system settings.
|
||||
*/
|
||||
#define STM32_WDG_USE_IWDG FALSE
|
||||
|
||||
/*
|
||||
* WSPI driver system settings.
|
||||
*/
|
||||
#define STM32_WSPI_USE_QUADSPI1 FALSE
|
||||
#define STM32_WSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
|
||||
|
||||
#endif /* MCUCONF_H */
|
|
@ -279,6 +279,72 @@ ifneq ($(findstring STM32F411, $(MCU)),)
|
|||
DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
|
||||
endif
|
||||
|
||||
ifneq ($(findstring STM32G431, $(MCU)),)
|
||||
# Cortex version
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32G4xx
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <keyboard_dir>/ld/
|
||||
MCU_LDSCRIPT ?= STM32G431xB
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP ?= stm32g4xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/,
|
||||
# <keyboard_dir>/boards/, or drivers/boards/
|
||||
BOARD ?= GENERIC_STM32_G431XB
|
||||
|
||||
USE_FPU ?= yes
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
|
||||
endif
|
||||
|
||||
ifneq ($(findstring STM32G474, $(MCU)),)
|
||||
# Cortex version
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32G4xx
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <keyboard_dir>/ld/
|
||||
MCU_LDSCRIPT ?= STM32G474xE
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP ?= stm32g4xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/,
|
||||
# <keyboard_dir>/boards/, or drivers/boards/
|
||||
BOARD ?= GENERIC_STM32_G474XE
|
||||
|
||||
USE_FPU ?= yes
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
|
||||
endif
|
||||
|
||||
ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287))
|
||||
PROTOCOL = LUFA
|
||||
|
||||
|
|
Loading…
Reference in New Issue