Format code according to conventions (#16322)

drivers/bluetooth/bluefruit_le.cpp

@@ -312,7 +312,9 @@ static bool ble_init(void) {
     return state.initialized;
 }
 
-static inline uint8_t min(uint8_t a, uint8_t b) { return a < b ? a : b; }
+static inline uint8_t min(uint8_t a, uint8_t b) {
+    return a < b ? a : b;
+}
 
 static bool read_response(char *resp, uint16_t resplen, bool verbose) {
     char *dest = resp;
@@ -424,7 +426,9 @@ bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) {
     return at_command(cmdbuf, resp, resplen, verbose);
 }
 
-bool bluefruit_le_is_connected(void) { return state.is_connected; }
+bool bluefruit_le_is_connected(void) {
+    return state.is_connected;
+}
 
 bool bluefruit_le_enable_keyboard(void) {
     char resbuf[128];
@@ -671,7 +675,9 @@ void bluefruit_le_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan,
 }
 #endif
 
-uint32_t bluefruit_le_read_battery_voltage(void) { return state.vbat; }
+uint32_t bluefruit_le_read_battery_voltage(void) {
+    return state.vbat;
+}
 
 bool bluefruit_le_set_mode_leds(bool on) {
     if (!state.configured) {

drivers/bluetooth/rn42.c

@@ -61,7 +61,9 @@ static inline uint16_t rn42_consumer_usage_to_bitmap(uint16_t usage) {
     }
 }
 
-void rn42_init(void) { uart_init(RN42_BAUD_RATE); }
+void rn42_init(void) {
+    uart_init(RN42_BAUD_RATE);
+}
 
 void rn42_send_keyboard(report_keyboard_t *report) {
     uart_write(0xFD);

drivers/eeprom/eeprom_driver.c

@@ -37,11 +37,17 @@ uint32_t eeprom_read_dword(const uint32_t *addr) {
     return ret;
 }
 
-void eeprom_write_byte(uint8_t *addr, uint8_t value) { eeprom_write_block(&value, addr, 1); }
+void eeprom_write_byte(uint8_t *addr, uint8_t value) {
+    eeprom_write_block(&value, addr, 1);
+}
 
-void eeprom_write_word(uint16_t *addr, uint16_t value) { eeprom_write_block(&value, addr, 2); }
+void eeprom_write_word(uint16_t *addr, uint16_t value) {
+    eeprom_write_block(&value, addr, 2);
+}
 
-void eeprom_write_dword(uint32_t *addr, uint32_t value) { eeprom_write_block(&value, addr, 4); }
+void eeprom_write_dword(uint32_t *addr, uint32_t value) {
+    eeprom_write_block(&value, addr, 4);
+}
 
 void eeprom_update_block(const void *buf, void *addr, size_t len) {
     uint8_t read_buf[len];

drivers/eeprom/eeprom_spi.c

@@ -52,7 +52,9 @@
 #    define EXTERNAL_EEPROM_SPI_TIMEOUT 100
 #endif
 
-static bool spi_eeprom_start(void) { return spi_start(EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN, EXTERNAL_EEPROM_SPI_LSBFIRST, EXTERNAL_EEPROM_SPI_MODE, EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR); }
+static bool spi_eeprom_start(void) {
+    return spi_start(EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN, EXTERNAL_EEPROM_SPI_LSBFIRST, EXTERNAL_EEPROM_SPI_MODE, EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR);
+}
 
 static spi_status_t spi_eeprom_wait_while_busy(int timeout) {
     uint32_t     deadline = timer_read32() + timeout;
@@ -80,7 +82,9 @@ static void spi_eeprom_transmit_address(uintptr_t addr) {
 
 //----------------------------------------------------------------------------------------------------------------------
 
-void eeprom_driver_init(void) { spi_init(); }
+void eeprom_driver_init(void) {
+    spi_init();
+}
 
 void eeprom_driver_erase(void) {
 #if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)

drivers/eeprom/eeprom_transient.c

@@ -30,9 +30,13 @@ size_t clamp_length(intptr_t offset, size_t len) {
     return len;
 }
 
-void eeprom_driver_init(void) { eeprom_driver_erase(); }
+void eeprom_driver_init(void) {
+    eeprom_driver_erase();
+}
 
-void eeprom_driver_erase(void) { memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE); }
+void eeprom_driver_erase(void) {
+    memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE);
+}
 
 void eeprom_read_block(void *buf, const void *addr, size_t len) {
     intptr_t offset = (intptr_t)addr;

drivers/flash/flash_spi.c

@@ -65,7 +65,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // #define DEBUG_FLASH_SPI_OUTPUT
 
-static bool spi_flash_start(void) { return spi_start(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN, EXTERNAL_FLASH_SPI_LSBFIRST, EXTERNAL_FLASH_SPI_MODE, EXTERNAL_FLASH_SPI_CLOCK_DIVISOR); }
+static bool spi_flash_start(void) {
+    return spi_start(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN, EXTERNAL_FLASH_SPI_LSBFIRST, EXTERNAL_FLASH_SPI_MODE, EXTERNAL_FLASH_SPI_CLOCK_DIVISOR);
+}
 
 static flash_status_t spi_flash_wait_while_busy(void) {
     uint32_t       deadline = timer_read32() + EXTERNAL_FLASH_SPI_TIMEOUT;
@@ -160,7 +162,9 @@ static flash_status_t spi_flash_transaction(uint8_t cmd, uint32_t addr, uint8_t
     return response;
 }
 
-void flash_init(void) { spi_init(); }
+void flash_init(void) {
+    spi_init();
+}
 
 flash_status_t flash_erase_chip(void) {
     flash_status_t response = FLASH_STATUS_SUCCESS;

drivers/haptic/DRV2605L.c

@@ -111,7 +111,9 @@ void DRV_rtp_init(void) {
     DRV_write(DRV_GO, 0x01);
 }
 
-void DRV_amplitude(uint8_t amplitude) { DRV_write(DRV_RTP_INPUT, amplitude); }
+void DRV_amplitude(uint8_t amplitude) {
+    DRV_write(DRV_RTP_INPUT, amplitude);
+}
 
 void DRV_pulse(uint8_t sequence) {
     DRV_write(DRV_GO, 0x00);

drivers/haptic/solenoid.c

@@ -28,13 +28,21 @@ uint8_t  solenoid_dwell   = SOLENOID_DEFAULT_DWELL;
 
 extern haptic_config_t haptic_config;
 
-void solenoid_buzz_on(void) { haptic_set_buzz(1); }
+void solenoid_buzz_on(void) {
+    haptic_set_buzz(1);
+}
 
-void solenoid_buzz_off(void) { haptic_set_buzz(0); }
+void solenoid_buzz_off(void) {
+    haptic_set_buzz(0);
+}
 
-void solenoid_set_buzz(int buzz) { haptic_set_buzz(buzz); }
+void solenoid_set_buzz(int buzz) {
+    haptic_set_buzz(buzz);
+}
 
-void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; }
+void solenoid_set_dwell(uint8_t dwell) {
+    solenoid_dwell = dwell;
+}
 
 void solenoid_stop(void) {
     SOLENOID_PIN_WRITE_INACTIVE();
@@ -89,4 +97,6 @@ void solenoid_setup(void) {
     }
 }
 
-void solenoid_shutdown(void) { SOLENOID_PIN_WRITE_INACTIVE(); }
+void solenoid_shutdown(void) {
+    SOLENOID_PIN_WRITE_INACTIVE();
+}

drivers/lcd/st7565.c

@@ -138,7 +138,9 @@ bool st7565_init(display_rotation_t rotation) {
     return true;
 }
 
-__attribute__((weak)) display_rotation_t st7565_init_user(display_rotation_t rotation) { return rotation; }
+__attribute__((weak)) display_rotation_t st7565_init_user(display_rotation_t rotation) {
+    return rotation;
+}
 
 void st7565_clear(void) {
     memset(st7565_buffer, 0, sizeof(st7565_buffer));
@@ -212,7 +214,8 @@ void st7565_advance_page(bool clearPageRemainder) {
         remaining = remaining / ST7565_FONT_WIDTH;
 
         // Write empty character until next line
-        while (remaining--) st7565_write_char(' ', false);
+        while (remaining--)
+            st7565_write_char(' ', false);
     } else {
         // Next page index out of bounds?
         if (index + remaining >= ST7565_MATRIX_SIZE) {
@@ -429,7 +432,9 @@ bool st7565_off(void) {
 
 __attribute__((weak)) void st7565_off_user(void) {}
 
-bool st7565_is_on(void) { return st7565_active; }
+bool st7565_is_on(void) {
+    return st7565_active;
+}
 
 bool st7565_invert(bool invert) {
     if (!st7565_initialized) {
@@ -445,9 +450,13 @@ bool st7565_invert(bool invert) {
     return st7565_inverted;
 }
 
-uint8_t st7565_max_chars(void) { return ST7565_DISPLAY_WIDTH / ST7565_FONT_WIDTH; }
+uint8_t st7565_max_chars(void) {
+    return ST7565_DISPLAY_WIDTH / ST7565_FONT_WIDTH;
+}
 
-uint8_t st7565_max_lines(void) { return ST7565_DISPLAY_HEIGHT / ST7565_FONT_HEIGHT; }
+uint8_t st7565_max_lines(void) {
+    return ST7565_DISPLAY_HEIGHT / ST7565_FONT_HEIGHT;
+}
 
 void st7565_task(void) {
     if (!st7565_initialized) {

drivers/led/apa102.c

@@ -72,7 +72,9 @@ void apa102_setleds(LED_TYPE *start_led, uint16_t num_leds) {
 }
 
 // Overwrite the default rgblight_call_driver to use apa102 driver
-void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) { apa102_setleds(start_led, num_leds); }
+void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) {
+    apa102_setleds(start_led, num_leds);
+}
 
 void static apa102_init(void) {
     setPinOutput(RGB_DI_PIN);

drivers/oled/ssd1306_sh1106.c

@@ -232,8 +232,12 @@ bool oled_init(oled_rotation_t rotation) {
     return true;
 }
 
-__attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return rotation; }
+__attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
-__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; }
+    return rotation;
+}
+__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return rotation;
+}
 
 void oled_clear(void) {
     memset(oled_buffer, 0, sizeof(oled_buffer));
@@ -368,7 +372,8 @@ void oled_advance_page(bool clearPageRemainder) {
         remaining = remaining / OLED_FONT_WIDTH;
 
         // Write empty character until next line
-        while (remaining--) oled_write_char(' ', false);
+        while (remaining--)
+            oled_write_char(' ', false);
     } else {
         // Next page index out of bounds?
         if (index + remaining >= OLED_MATRIX_SIZE) {
@@ -595,7 +600,9 @@ bool oled_off(void) {
     return !oled_active;
 }
 
-bool is_oled_on(void) { return oled_active; }
+bool is_oled_on(void) {
+    return oled_active;
+}
 
 uint8_t oled_set_brightness(uint8_t level) {
     if (!oled_initialized) {
@@ -613,7 +620,9 @@ uint8_t oled_set_brightness(uint8_t level) {
     return oled_brightness;
 }
 
-uint8_t oled_get_brightness(void) { return oled_brightness; }
+uint8_t oled_get_brightness(void) {
+    return oled_brightness;
+}
 
 // Set the specific 8 lines rows of the screen to scroll.
 // 0 is the default for start, and 7 for end, which is the entire
@@ -693,7 +702,9 @@ bool oled_scroll_off(void) {
     return !oled_scrolling;
 }
 
-bool is_oled_scrolling(void) { return oled_scrolling; }
+bool is_oled_scrolling(void) {
+    return oled_scrolling;
+}
 
 bool oled_invert(bool invert) {
     if (!oled_initialized) {
@@ -777,5 +788,9 @@ void oled_task(void) {
 #endif
 }
 
-__attribute__((weak)) bool oled_task_kb(void) { return oled_task_user(); }
+__attribute__((weak)) bool oled_task_kb(void) {
-__attribute__((weak)) bool oled_task_user(void) { return true; }
+    return oled_task_user();
+}
+__attribute__((weak)) bool oled_task_user(void) {
+    return true;
+}

drivers/ps2/ps2_interrupt.c

@@ -71,7 +71,9 @@ static inline void    pbuf_clear(void);
 
 #if defined(PROTOCOL_CHIBIOS)
 void ps2_interrupt_service_routine(void);
-void palCallback(void *arg) { ps2_interrupt_service_routine(); }
+void palCallback(void *arg) {
+    ps2_interrupt_service_routine();
+}
 
 #    define PS2_INT_INIT()                                 \
         { palSetLineMode(PS2_CLOCK_PIN, PAL_MODE_INPUT); } \
@@ -244,7 +246,9 @@ RETURN:
 }
 
 #if defined(__AVR__)
-ISR(PS2_INT_VECT) { ps2_interrupt_service_routine(); }
+ISR(PS2_INT_VECT) {
+    ps2_interrupt_service_routine();
+}
 #endif
 
 /* send LED state to keyboard */

drivers/ps2/ps2_mouse.c

@@ -113,9 +113,13 @@ void ps2_mouse_task(void) {
     ps2_mouse_clear_report(&mouse_report);
 }
 
-void ps2_mouse_disable_data_reporting(void) { PS2_MOUSE_SEND(PS2_MOUSE_DISABLE_DATA_REPORTING, "ps2 mouse disable data reporting"); }
+void ps2_mouse_disable_data_reporting(void) {
+    PS2_MOUSE_SEND(PS2_MOUSE_DISABLE_DATA_REPORTING, "ps2 mouse disable data reporting");
+}
 
-void ps2_mouse_enable_data_reporting(void) { PS2_MOUSE_SEND(PS2_MOUSE_ENABLE_DATA_REPORTING, "ps2 mouse enable data reporting"); }
+void ps2_mouse_enable_data_reporting(void) {
+    PS2_MOUSE_SEND(PS2_MOUSE_ENABLE_DATA_REPORTING, "ps2 mouse enable data reporting");
+}
 
 void ps2_mouse_set_remote_mode(void) {
     PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_REMOTE_MODE, "ps2 mouse set remote mode");
@@ -127,13 +131,21 @@ void ps2_mouse_set_stream_mode(void) {
     ps2_mouse_mode = PS2_MOUSE_STREAM_MODE;
 }
 
-void ps2_mouse_set_scaling_2_1(void) { PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_2_1, "ps2 mouse set scaling 2:1"); }
+void ps2_mouse_set_scaling_2_1(void) {
+    PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_2_1, "ps2 mouse set scaling 2:1");
+}
 
-void ps2_mouse_set_scaling_1_1(void) { PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_1_1, "ps2 mouse set scaling 1:1"); }
+void ps2_mouse_set_scaling_1_1(void) {
+    PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_1_1, "ps2 mouse set scaling 1:1");
+}
 
-void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution) { PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_RESOLUTION, resolution, "ps2 mouse set resolution"); }
+void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution) {
+    PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_RESOLUTION, resolution, "ps2 mouse set resolution");
+}
 
-void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate) { PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_SAMPLE_RATE, sample_rate, "ps2 mouse set sample rate"); }
+void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate) {
+    PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_SAMPLE_RATE, sample_rate, "ps2 mouse set sample rate");
+}
 
 /* ============================= HELPERS ============================ */
 

drivers/sensors/adns5050.c

@@ -74,9 +74,13 @@ void adns5050_sync(void) {
     writePinHigh(ADNS5050_CS_PIN);
 }
 
-void adns5050_cs_select(void) { writePinLow(ADNS5050_CS_PIN); }
+void adns5050_cs_select(void) {
+    writePinLow(ADNS5050_CS_PIN);
+}
 
-void adns5050_cs_deselect(void) { writePinHigh(ADNS5050_CS_PIN); }
+void adns5050_cs_deselect(void) {
+    writePinHigh(ADNS5050_CS_PIN);
+}
 
 uint8_t adns5050_serial_read(void) {
     setPinInput(ADNS5050_SDIO_PIN);

drivers/sensors/adns9800.c

@@ -77,7 +77,9 @@
 #define MSB1              0x80
 // clang-format on
 
-void adns9800_spi_start(void) { spi_start(ADNS9800_CS_PIN, false, ADNS9800_SPI_MODE, ADNS9800_SPI_DIVISOR); }
+void adns9800_spi_start(void) {
+    spi_start(ADNS9800_CS_PIN, false, ADNS9800_SPI_MODE, ADNS9800_SPI_DIVISOR);
+}
 
 void adns9800_write(uint8_t reg_addr, uint8_t data) {
     adns9800_spi_start();

drivers/sensors/cirque_pinnacle.c

@@ -54,7 +54,9 @@ void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count);
 void RAP_Write(uint8_t address, uint8_t data);
 
 #ifdef CONSOLE_ENABLE
-void print_byte(uint8_t byte) { xprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); }
+void print_byte(uint8_t byte) {
+    xprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0'));
+}
 #endif
 
 /*  Logical Scaling Functions */
@@ -73,8 +75,12 @@ void ClipCoordinates(pinnacle_data_t* coordinates) {
     }
 }
 
-uint16_t cirque_pinnacle_get_scale(void) { return scale_data; }
+uint16_t cirque_pinnacle_get_scale(void) {
-void     cirque_pinnacle_set_scale(uint16_t scale) { scale_data = scale; }
+    return scale_data;
+}
+void cirque_pinnacle_set_scale(uint16_t scale) {
+    scale_data = scale;
+}
 
 // Scales data to desired X & Y resolution
 void cirque_pinnacle_scale_data(pinnacle_data_t* coordinates, uint16_t xResolution, uint16_t yResolution) {

drivers/sensors/pimoroni_trackball.c

@@ -33,7 +33,9 @@
 
 static uint16_t precision = 128;
 
-uint16_t pimoroni_trackball_get_cpi(void) { return (precision * 125); }
+uint16_t pimoroni_trackball_get_cpi(void) {
+    return (precision * 125);
+}
 /**
  * @brief Sets the scaling value for pimoroni trackball
  *

drivers/sensors/pmw3360.c

@@ -86,7 +86,9 @@
 bool _inBurst = false;
 
 #ifdef CONSOLE_ENABLE
-void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); }
+void print_byte(uint8_t byte) {
+    dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0'));
+}
 #endif
 #define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt)))
 

drivers/sensors/pmw3389.c

@@ -90,7 +90,9 @@
 bool _inBurst = false;
 
 #ifdef CONSOLE_ENABLE
-void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); }
+void print_byte(uint8_t byte) {
+    dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0'));
+}
 #endif
 #define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt)))
 

platforms/arm_atsam/eeprom_samd.c

@@ -155,7 +155,9 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
     }
 }
 
-void eeprom_update_byte(uint8_t *addr, uint8_t value) { eeprom_write_byte(addr, value); }
+void eeprom_update_byte(uint8_t *addr, uint8_t value) {
+    eeprom_write_byte(addr, value);
+}
 
 void eeprom_update_word(uint16_t *addr, uint16_t value) {
     uint8_t *p = (uint8_t *)addr;

platforms/arm_atsam/timer.c

@@ -2,18 +2,34 @@
 #include "timer.h"
 #include "tmk_core/protocol/arm_atsam/clks.h"
 
-void set_time(uint64_t tset) { ms_clk = tset; }
+void set_time(uint64_t tset) {
+    ms_clk = tset;
+}
 
-void timer_init(void) { timer_clear(); }
+void timer_init(void) {
+    timer_clear();
+}
 
-uint16_t timer_read(void) { return (uint16_t)ms_clk; }
+uint16_t timer_read(void) {
+    return (uint16_t)ms_clk;
+}
 
-uint32_t timer_read32(void) { return (uint32_t)ms_clk; }
+uint32_t timer_read32(void) {
+    return (uint32_t)ms_clk;
+}
 
-uint64_t timer_read64(void) { return ms_clk; }
+uint64_t timer_read64(void) {
+    return ms_clk;
+}
 
-uint16_t timer_elapsed(uint16_t tlast) { return TIMER_DIFF_16(timer_read(), tlast); }
+uint16_t timer_elapsed(uint16_t tlast) {
+    return TIMER_DIFF_16(timer_read(), tlast);
+}
 
-uint32_t timer_elapsed32(uint32_t tlast) { return TIMER_DIFF_32(timer_read32(), tlast); }
+uint32_t timer_elapsed32(uint32_t tlast) {
+    return TIMER_DIFF_32(timer_read32(), tlast);
+}
 
-void timer_clear(void) { set_time(0); }
+void timer_clear(void) {
+    set_time(0);
+}

platforms/avr/drivers/analog.c

@@ -21,9 +21,13 @@
 
 static uint8_t aref = ADC_REF_POWER;
 
-void analogReference(uint8_t mode) { aref = mode & (_BV(REFS1) | _BV(REFS0)); }
+void analogReference(uint8_t mode) {
+    aref = mode & (_BV(REFS1) | _BV(REFS0));
+}
 
-int16_t analogReadPin(pin_t pin) { return adc_read(pinToMux(pin)); }
+int16_t analogReadPin(pin_t pin) {
+    return adc_read(pinToMux(pin));
+}
 
 uint8_t pinToMux(pin_t pin) {
     switch (pin) {

platforms/avr/drivers/audio_pwm_hardware.c

@@ -202,7 +202,9 @@ void         channel_2_set_frequency(float freq) {
     AUDIO2_OCRxy = (uint16_t)((((float)F_CPU) / (freq * CPU_PRESCALER)) * note_timbre / 100);
 }
 
-float channel_2_get_frequency(void) { return channel_2_frequency; }
+float channel_2_get_frequency(void) {
+    return channel_2_frequency;
+}
 
 void channel_2_start(void) {
     AUDIO2_TIMSKx |= _BV(AUDIO2_OCIExy);

platforms/avr/drivers/hd44780.c

@@ -362,17 +362,23 @@ void lcd_gotoxy(uint8_t x, uint8_t y) {
 
 /*************************************************************************
 *************************************************************************/
-int lcd_getxy(void) { return lcd_waitbusy(); }
+int lcd_getxy(void) {
+    return lcd_waitbusy();
+}
 
 /*************************************************************************
 Clear display and set cursor to home position
 *************************************************************************/
-void lcd_clrscr(void) { lcd_command(1 << LCD_CLR); }
+void lcd_clrscr(void) {
+    lcd_command(1 << LCD_CLR);
+}
 
 /*************************************************************************
 Set cursor to home position
 *************************************************************************/
-void lcd_home(void) { lcd_command(1 << LCD_HOME); }
+void lcd_home(void) {
+    lcd_command(1 << LCD_HOME);
+}
 
 /*************************************************************************
 Display character at current cursor position

platforms/avr/drivers/ps2/ps2_io.c

@@ -23,7 +23,9 @@ void clock_lo(void) {
     setPinOutput(PS2_CLOCK_PIN);
 }
 
-void clock_hi(void) { setPinInputHigh(PS2_CLOCK_PIN); }
+void clock_hi(void) {
+    setPinInputHigh(PS2_CLOCK_PIN);
+}
 
 bool clock_in(void) {
     setPinInputHigh(PS2_CLOCK_PIN);
@@ -42,7 +44,9 @@ void data_lo(void) {
     setPinOutput(PS2_DATA_PIN);
 }
 
-void data_hi(void) { setPinInputHigh(PS2_DATA_PIN); }
+void data_hi(void) {
+    setPinInputHigh(PS2_DATA_PIN);
+}
 
 bool data_in(void) {
     setPinInputHigh(PS2_DATA_PIN);

platforms/avr/drivers/serial.c

@@ -223,29 +223,45 @@
 #    define SLAVE_INT_ACK_WIDTH 4
 
 inline static void serial_delay(void) ALWAYS_INLINE;
-inline static void serial_delay(void) { _delay_us(SERIAL_DELAY); }
+inline static void serial_delay(void) {
+    _delay_us(SERIAL_DELAY);
+}
 
 inline static void serial_delay_half1(void) ALWAYS_INLINE;
-inline static void serial_delay_half1(void) { _delay_us(SERIAL_DELAY_HALF1); }
+inline static void serial_delay_half1(void) {
+    _delay_us(SERIAL_DELAY_HALF1);
+}
 
 inline static void serial_delay_half2(void) ALWAYS_INLINE;
-inline static void serial_delay_half2(void) { _delay_us(SERIAL_DELAY_HALF2); }
+inline static void serial_delay_half2(void) {
+    _delay_us(SERIAL_DELAY_HALF2);
+}
 
 inline static void serial_output(void) ALWAYS_INLINE;
-inline static void serial_output(void) { setPinOutput(SOFT_SERIAL_PIN); }
+inline static void serial_output(void) {
+    setPinOutput(SOFT_SERIAL_PIN);
+}
 
 // make the serial pin an input with pull-up resistor
 inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
-inline static void serial_input_with_pullup(void) { setPinInputHigh(SOFT_SERIAL_PIN); }
+inline static void serial_input_with_pullup(void) {
+    setPinInputHigh(SOFT_SERIAL_PIN);
+}
 
 inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
-inline static uint8_t serial_read_pin(void) { return !!readPin(SOFT_SERIAL_PIN); }
+inline static uint8_t serial_read_pin(void) {
+    return !!readPin(SOFT_SERIAL_PIN);
+}
 
 inline static void serial_low(void) ALWAYS_INLINE;
-inline static void serial_low(void) { writePinLow(SOFT_SERIAL_PIN); }
+inline static void serial_low(void) {
+    writePinLow(SOFT_SERIAL_PIN);
+}
 
 inline static void serial_high(void) ALWAYS_INLINE;
-inline static void serial_high(void) { writePinHigh(SOFT_SERIAL_PIN); }
+inline static void serial_high(void) {
+    writePinHigh(SOFT_SERIAL_PIN);
+}
 
 void soft_serial_initiator_init(void) {
     serial_output();

platforms/avr/drivers/ssd1306.c

@@ -226,7 +226,9 @@ void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
     matrix_write_char_inner(matrix, c);
 }
 
-void iota_gfx_write_char(uint8_t c) { matrix_write_char(&display, c); }
+void iota_gfx_write_char(uint8_t c) {
+    matrix_write_char(&display, c);
+}
 
 void matrix_write(struct CharacterMatrix *matrix, const char *data) {
     const char *end = data + strlen(data);
@@ -236,7 +238,9 @@ void matrix_write(struct CharacterMatrix *matrix, const char *data) {
     }
 }
 
-void iota_gfx_write(const char *data) { matrix_write(&display, data); }
+void iota_gfx_write(const char *data) {
+    matrix_write(&display, data);
+}
 
 void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
     while (true) {
@@ -249,7 +253,9 @@ void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
     }
 }
 
-void iota_gfx_write_P(const char *data) { matrix_write_P(&display, data); }
+void iota_gfx_write_P(const char *data) {
+    matrix_write_P(&display, data);
+}
 
 void matrix_clear(struct CharacterMatrix *matrix) {
     memset(matrix->display, ' ', sizeof(matrix->display));
@@ -257,7 +263,9 @@ void matrix_clear(struct CharacterMatrix *matrix) {
     matrix->dirty  = true;
 }
 
-void iota_gfx_clear_screen(void) { matrix_clear(&display); }
+void iota_gfx_clear_screen(void) {
+    matrix_clear(&display);
+}
 
 void matrix_render(struct CharacterMatrix *matrix) {
     last_flush = timer_read();
@@ -301,7 +309,9 @@ done:
 #    endif
 }
 
-void iota_gfx_flush(void) { matrix_render(&display); }
+void iota_gfx_flush(void) {
+    matrix_render(&display);
+}
 
 __attribute__((weak)) void iota_gfx_task_user(void) {}
 

platforms/avr/drivers/ws2812_i2c.c

@@ -13,7 +13,9 @@
 #    define WS2812_TIMEOUT 100
 #endif
 
-void ws2812_init(void) { i2c_init(); }
+void ws2812_init(void) {
+    i2c_init();
+}
 
 // Setleds for standard RGB
 void ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {

platforms/avr/printf.c

@@ -17,4 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "xprintf.h"
 #include "sendchar.h"
 
-void print_set_sendchar(sendchar_func_t func) { xdev_out(func); }
+void print_set_sendchar(sendchar_func_t func) {
+    xdev_out(func);
+}

platforms/avr/timer.c

@@ -73,7 +73,9 @@ void timer_init(void) {
  * FIXME: needs doc
  */
 inline void timer_clear(void) {
-    ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { timer_count = 0; }
+    ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
+        timer_count = 0;
+    }
 }
 
 /** \brief timer read
@@ -83,7 +85,9 @@ inline void timer_clear(void) {
 inline uint16_t timer_read(void) {
     uint32_t t;
 
-    ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { t = timer_count; }
+    ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
+        t = timer_count;
+    }
 
     return (t & 0xFFFF);
 }
@@ -95,7 +99,9 @@ inline uint16_t timer_read(void) {
 inline uint32_t timer_read32(void) {
     uint32_t t;
 
-    ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { t = timer_count; }
+    ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
+        t = timer_count;
+    }
 
     return t;
 }
@@ -107,7 +113,9 @@ inline uint32_t timer_read32(void) {
 inline uint16_t timer_elapsed(uint16_t last) {
     uint32_t t;
 
-    ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { t = timer_count; }
+    ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
+        t = timer_count;
+    }
 
     return TIMER_DIFF_16((t & 0xFFFF), last);
 }
@@ -119,7 +127,9 @@ inline uint16_t timer_elapsed(uint16_t last) {
 inline uint32_t timer_elapsed32(uint32_t last) {
     uint32_t t;
 
-    ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { t = timer_count; }
+    ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
+        t = timer_count;
+    }
 
     return TIMER_DIFF_32(t, last);
 }
@@ -130,4 +140,6 @@ inline uint32_t timer_elapsed32(uint32_t last) {
 #else
 #    define TIMER_INTERRUPT_VECTOR TIMER0_COMP_vect
 #endif
-ISR(TIMER_INTERRUPT_VECTOR, ISR_NOBLOCK) { timer_count++; }
+ISR(TIMER_INTERRUPT_VECTOR, ISR_NOBLOCK) {
+    timer_count++;
+}

platforms/chibios/bootloaders/stm32duino.c

@@ -18,4 +18,6 @@
 
 #include <ch.h>
 
-__attribute__((weak)) void bootloader_jump(void) { NVIC_SystemReset(); }
+__attribute__((weak)) void bootloader_jump(void) {
+    NVIC_SystemReset();
+}

platforms/chibios/drivers/analog.h

@@ -28,7 +28,9 @@ typedef struct {
     uint8_t  adc;
 } adc_mux;
 #define TO_MUX(i, a) \
-    (adc_mux) { i, a }
+    (adc_mux) {      \
+        i, a         \
+    }
 
 int16_t analogReadPin(pin_t pin);
 int16_t analogReadPinAdc(pin_t pin, uint8_t adc);

platforms/chibios/drivers/audio_dac_additive.c

@@ -321,7 +321,9 @@ void audio_driver_initialize() {
     gptStart(&GPTD6, &gpt6cfg1);
 }
 
-void audio_driver_stop(void) { state = OUTPUT_SHOULD_STOP; }
+void audio_driver_stop(void) {
+    state = OUTPUT_SHOULD_STOP;
+}
 
 void audio_driver_start(void) {
     gptStartContinuous(&GPTD6, 2U);

platforms/chibios/drivers/audio_dac_basic.c

@@ -121,7 +121,9 @@ void         channel_1_set_frequency(float freq) {
     gpt6cfg1.frequency = 2 * freq * AUDIO_DAC_BUFFER_SIZE;
     channel_1_start();
 }
-float channel_1_get_frequency(void) { return channel_1_frequency; }
+float channel_1_get_frequency(void) {
+    return channel_1_frequency;
+}
 
 void channel_2_start(void) {
     gptStart(&GPTD7, &gpt7cfg1);
@@ -146,7 +148,9 @@ void         channel_2_set_frequency(float freq) {
     gpt7cfg1.frequency = 2 * freq * AUDIO_DAC_BUFFER_SIZE;
     channel_2_start();
 }
-float channel_2_get_frequency(void) { return channel_2_frequency; }
+float channel_2_get_frequency(void) {
+    return channel_2_frequency;
+}
 
 static void gpt_audio_state_cb(GPTDriver *gptp) {
     if (audio_update_state()) {

platforms/chibios/drivers/audio_pwm_hardware.c

@@ -82,14 +82,18 @@ void         channel_1_set_frequency(float freq) {
                      PWM_PERCENTAGE_TO_WIDTH(&AUDIO_PWM_DRIVER, (100 - note_timbre) * 100));
 }
 
-float channel_1_get_frequency(void) { return channel_1_frequency; }
+float channel_1_get_frequency(void) {
+    return channel_1_frequency;
+}
 
 void channel_1_start(void) {
     pwmStop(&AUDIO_PWM_DRIVER);
     pwmStart(&AUDIO_PWM_DRIVER, &pwmCFG);
 }
 
-void channel_1_stop(void) { pwmStop(&AUDIO_PWM_DRIVER); }
+void channel_1_stop(void) {
+    pwmStop(&AUDIO_PWM_DRIVER);
+}
 
 static void gpt_callback(GPTDriver *gptp);
 GPTConfig   gptCFG = {

platforms/chibios/drivers/audio_pwm_software.c

@@ -68,7 +68,9 @@ void         channel_1_set_frequency(float freq) {
                      PWM_PERCENTAGE_TO_WIDTH(&AUDIO_PWM_DRIVER, (100 - note_timbre) * 100));
 }
 
-float channel_1_get_frequency(void) { return channel_1_frequency; }
+float channel_1_get_frequency(void) {
+    return channel_1_frequency;
+}
 
 void channel_1_start(void) {
     pwmStop(&AUDIO_PWM_DRIVER);

platforms/chibios/drivers/i2c_master.c

@@ -203,4 +203,6 @@ i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uin
     return chibios_to_qmk(&status);
 }
 
-void i2c_stop(void) { i2cStop(&I2C_DRIVER); }
+void i2c_stop(void) {
+    i2cStop(&I2C_DRIVER);
+}

platforms/chibios/drivers/serial.c

@@ -50,14 +50,30 @@
 #    error invalid SELECT_SOFT_SERIAL_SPEED value
 #endif
 
-inline static void serial_delay(void) { wait_us(SERIAL_DELAY); }
+inline static void serial_delay(void) {
-inline static void serial_delay_half(void) { wait_us(SERIAL_DELAY / 2); }
+    wait_us(SERIAL_DELAY);
-inline static void serial_delay_blip(void) { wait_us(1); }
+}
-inline static void serial_output(void) { setPinOutput(SOFT_SERIAL_PIN); }
+inline static void serial_delay_half(void) {
-inline static void serial_input(void) { setPinInputHigh(SOFT_SERIAL_PIN); }
+    wait_us(SERIAL_DELAY / 2);
-inline static bool serial_read_pin(void) { return !!readPin(SOFT_SERIAL_PIN); }
+}
-inline static void serial_low(void) { writePinLow(SOFT_SERIAL_PIN); }
+inline static void serial_delay_blip(void) {
-inline static void serial_high(void) { writePinHigh(SOFT_SERIAL_PIN); }
+    wait_us(1);
+}
+inline static void serial_output(void) {
+    setPinOutput(SOFT_SERIAL_PIN);
+}
+inline static void serial_input(void) {
+    setPinInputHigh(SOFT_SERIAL_PIN);
+}
+inline static bool serial_read_pin(void) {
+    return !!readPin(SOFT_SERIAL_PIN);
+}
+inline static void serial_low(void) {
+    writePinLow(SOFT_SERIAL_PIN);
+}
+inline static void serial_high(void) {
+    writePinHigh(SOFT_SERIAL_PIN);
+}
 
 void interrupt_handler(void *arg);
 

platforms/chibios/drivers/uart.c

@@ -43,7 +43,9 @@ void uart_init(uint32_t baud) {
     }
 }
 
-void uart_write(uint8_t data) { sdPut(&SERIAL_DRIVER, c); }
+void uart_write(uint8_t data) {
+    sdPut(&SERIAL_DRIVER, c);
+}
 
 uint8_t uart_read(void) {
     msg_t res = sdGet(&SERIAL_DRIVER);
@@ -51,8 +53,14 @@ uint8_t uart_read(void) {
     return (uint8_t)res;
 }
 
-void uart_transmit(const uint8_t *data, uint16_t length) { sdWrite(&SERIAL_DRIVER, data, length); }
+void uart_transmit(const uint8_t *data, uint16_t length) {
+    sdWrite(&SERIAL_DRIVER, data, length);
+}
 
-void uart_receive(uint8_t *data, uint16_t length) { sdRead(&SERIAL_DRIVER, data, length); }
+void uart_receive(uint8_t *data, uint16_t length) {
+    sdRead(&SERIAL_DRIVER, data, length);
+}
 
-bool uart_available(void) { return !sdGetWouldBlock(&SERIAL_DRIVER); }
+bool uart_available(void) {
+    return !sdGetWouldBlock(&SERIAL_DRIVER);
+}

platforms/chibios/drivers/ws2812.c

@@ -67,7 +67,9 @@ void sendByte(uint8_t byte) {
     }
 }
 
-void ws2812_init(void) { palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE); }
+void ws2812_init(void) {
+    palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE);
+}
 
 // Setleds for standard RGB
 void ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {

platforms/chibios/drivers/ws2812_pwm.c

@@ -259,8 +259,10 @@ write/read to/from the other buffer).
 void ws2812_init(void) {
     // Initialize led frame buffer
     uint32_t i;
-    for (i = 0; i < WS2812_COLOR_BIT_N; i++) ws2812_frame_buffer[i] = WS2812_DUTYCYCLE_0;      // All color bits are zero duty cycle
+    for (i = 0; i < WS2812_COLOR_BIT_N; i++)
-    for (i = 0; i < WS2812_RESET_BIT_N; i++) ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0;  // All reset bits are zero
+        ws2812_frame_buffer[i] = WS2812_DUTYCYCLE_0; // All color bits are zero duty cycle
+    for (i = 0; i < WS2812_RESET_BIT_N; i++)
+        ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0; // All reset bits are zero
 
     palSetLineMode(RGB_DI_PIN, WS2812_OUTPUT_MODE);
 

platforms/chibios/drivers/ws2812_spi.c

@@ -104,20 +104,30 @@ static void set_led_color_rgb(LED_TYPE color, int pos) {
     uint8_t* tx_start = &txbuf[PREAMBLE_SIZE];
 
 #if (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_GRB)
-    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.g, j);
+    for (int j = 0; j < 4; j++)
-    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.r, j);
+        tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.g, j);
-    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.b, j);
+    for (int j = 0; j < 4; j++)
+        tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.r, j);
+    for (int j = 0; j < 4; j++)
+        tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.b, j);
 #elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_RGB)
-    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.r, j);
+    for (int j = 0; j < 4; j++)
-    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j);
+        tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.r, j);
-    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.b, j);
+    for (int j = 0; j < 4; j++)
+        tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j);
+    for (int j = 0; j < 4; j++)
+        tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.b, j);
 #elif (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_BGR)
-    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.b, j);
+    for (int j = 0; j < 4; j++)
-    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j);
+        tx_start[BYTES_FOR_LED * pos + j] = get_protocol_eq(color.b, j);
-    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.r, j);
+    for (int j = 0; j < 4; j++)
+        tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j);
+    for (int j = 0; j < 4; j++)
+        tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.r, j);
 #endif
 #ifdef RGBW
-    for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 4 + j] = get_protocol_eq(color.w, j);
+    for (int j = 0; j < 4; j++)
+        tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 4 + j] = get_protocol_eq(color.w, j);
 #endif
 }
 

platforms/chibios/eeprom_stm32.c

@@ -560,9 +560,13 @@ uint16_t EEPROM_ReadDataWord(uint16_t Address) {
 /*****************************************************************************
  *  Bind to eeprom_driver.c
  *******************************************************************************/
-void eeprom_driver_init(void) { EEPROM_Init(); }
+void eeprom_driver_init(void) {
+    EEPROM_Init();
+}
 
-void eeprom_driver_erase(void) { EEPROM_Erase(); }
+void eeprom_driver_erase(void) {
+    EEPROM_Erase();
+}
 
 void eeprom_read_block(void *buf, const void *addr, size_t len) {
     const uint8_t *src  = (const uint8_t *)addr;

platforms/chibios/eeprom_teensy.c

@@ -162,7 +162,9 @@ void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
  *
  * FIXME: needs doc
  */
-int eeprom_is_ready(void) { return (FTFL->FCNFG & FTFL_FCNFG_EEERDY) ? 1 : 0; }
+int eeprom_is_ready(void) {
+    return (FTFL->FCNFG & FTFL_FCNFG_EEERDY) ? 1 : 0;
+}
 
 /** \brief flexram wait
  *
@@ -486,7 +488,9 @@ void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
     }
 }
 
-int eeprom_is_ready(void) { return 1; }
+int eeprom_is_ready(void) {
+    return 1;
+}
 
 void eeprom_write_word(uint16_t *addr, uint16_t value) {
     uint8_t *p = (uint8_t *)addr;
@@ -515,7 +519,9 @@ void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
 #endif /* chip selection */
 // The update functions just calls write for now, but could probably be optimized
 
-void eeprom_update_byte(uint8_t *addr, uint8_t value) { eeprom_write_byte(addr, value); }
+void eeprom_update_byte(uint8_t *addr, uint8_t value) {
+    eeprom_write_byte(addr, value);
+}
 
 void eeprom_update_word(uint16_t *addr, uint16_t value) {
     uint8_t *p = (uint8_t *)addr;

platforms/chibios/sleep_led.c

@@ -169,21 +169,33 @@ static void gptTimerCallback(GPTDriver *gptp) {
 static const GPTConfig gptcfg = {1000000, gptTimerCallback, 0, 0};
 
 /* Initialise the timer */
-void sleep_led_init(void) { gptStart(&SLEEP_LED_GPT_DRIVER, &gptcfg); }
+void sleep_led_init(void) {
+    gptStart(&SLEEP_LED_GPT_DRIVER, &gptcfg);
+}
 
-void sleep_led_enable(void) { gptStartContinuous(&SLEEP_LED_GPT_DRIVER, gptcfg.frequency / 0xFFFF); }
+void sleep_led_enable(void) {
+    gptStartContinuous(&SLEEP_LED_GPT_DRIVER, gptcfg.frequency / 0xFFFF);
+}
 
-void sleep_led_disable(void) { gptStopTimer(&SLEEP_LED_GPT_DRIVER); }
+void sleep_led_disable(void) {
+    gptStopTimer(&SLEEP_LED_GPT_DRIVER);
+}
 
-void sleep_led_toggle(void) { (SLEEP_LED_GPT_DRIVER.state == GPT_READY) ? sleep_led_enable() : sleep_led_disable(); }
+void sleep_led_toggle(void) {
+    (SLEEP_LED_GPT_DRIVER.state == GPT_READY) ? sleep_led_enable() : sleep_led_disable();
+}
 
 #else /* platform selection: not on familiar chips */
 
 void sleep_led_init(void) {}
 
-void sleep_led_enable(void) { led_set(1 << USB_LED_CAPS_LOCK); }
+void sleep_led_enable(void) {
+    led_set(1 << USB_LED_CAPS_LOCK);
+}
 
-void sleep_led_disable(void) { led_set(0); }
+void sleep_led_disable(void) {
+    led_set(0);
+}
 
 void sleep_led_toggle(void) {
     // not implemented

platforms/chibios/syscall-fallbacks.c

@@ -87,9 +87,13 @@ __attribute__((weak, used)) int _kill(int pid, int sig) {
     return -1;
 }
 
-__attribute__((weak, used)) pid_t _getpid(void) { return 1; }
+__attribute__((weak, used)) pid_t _getpid(void) {
+    return 1;
+}
 
-__attribute__((weak, used)) void _fini(void) { return; }
+__attribute__((weak, used)) void _fini(void) {
+    return;
+}
 
 __attribute__((weak, used, noreturn)) void _exit(int i) {
     while (1)

platforms/chibios/timer.c

@@ -73,7 +73,9 @@ void timer_clear(void) {
     chSysUnlock();
 }
 
-uint16_t timer_read(void) { return (uint16_t)timer_read32(); }
+uint16_t timer_read(void) {
+    return (uint16_t)timer_read32();
+}
 
 uint32_t timer_read32(void) {
     chSysLock();
@@ -96,6 +98,10 @@ uint32_t timer_read32(void) {
     return (uint32_t)TIME_I2MS(ticks) + ms_offset_copy;
 }
 
-uint16_t timer_elapsed(uint16_t last) { return TIMER_DIFF_16(timer_read(), last); }
+uint16_t timer_elapsed(uint16_t last) {
+    return TIMER_DIFF_16(timer_read(), last);
+}
 
-uint32_t timer_elapsed32(uint32_t last) { return TIMER_DIFF_32(timer_read32(), last); }
+uint32_t timer_elapsed32(uint32_t last) {
+    return TIMER_DIFF_32(timer_read32(), last);
+}

platforms/suspend.c

@@ -18,7 +18,9 @@ __attribute__((weak)) void suspend_power_down_user(void) {}
  *
  * FIXME: needs doc
  */
-__attribute__((weak)) void suspend_power_down_kb(void) { suspend_power_down_user(); }
+__attribute__((weak)) void suspend_power_down_kb(void) {
+    suspend_power_down_user();
+}
 
 /** \brief run user level code immediately after wakeup
  *
@@ -30,7 +32,9 @@ __attribute__((weak)) void suspend_wakeup_init_user(void) {}
  *
  * FIXME: needs doc
  */
-__attribute__((weak)) void suspend_wakeup_init_kb(void) { suspend_wakeup_init_user(); }
+__attribute__((weak)) void suspend_wakeup_init_kb(void) {
+    suspend_wakeup_init_user();
+}
 
 /** \brief suspend wakeup condition
  *

platforms/test/eeprom.c

@@ -68,7 +68,9 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
     }
 }
 
-void eeprom_update_byte(uint8_t *addr, uint8_t value) { eeprom_write_byte(addr, value); }
+void eeprom_update_byte(uint8_t *addr, uint8_t value) {
+    eeprom_write_byte(addr, value);
+}
 
 void eeprom_update_word(uint16_t *addr, uint16_t value) {
     uint8_t *p = (uint8_t *)addr;

platforms/test/eeprom_stm32_tests.cpp

@@ -60,7 +60,9 @@ class EepromStm32Test : public testing::Test {
     ~EepromStm32Test() {}
 
    protected:
-    void SetUp() override { EEPROM_Erase(); }
+    void SetUp() override {
+        EEPROM_Erase();
+    }
 
     void TearDown() override {
 #ifdef EEPROM_DEBUG

platforms/test/flash_stm32_mock.c

@@ -44,6 +44,12 @@ FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) {
     }
 }
 
-FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) { return FLASH_COMPLETE; }
+FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) {
-void         FLASH_Unlock(void) { flash_locked = false; }
+    return FLASH_COMPLETE;
-void         FLASH_Lock(void) { flash_locked = true; }
+}
+void FLASH_Unlock(void) {
+    flash_locked = false;
+}
+void FLASH_Lock(void) {
+    flash_locked = true;
+}

platforms/test/timer.c

@@ -18,16 +18,34 @@
 
 static uint32_t current_time = 0;
 
-void timer_init(void) { current_time = 0; }
+void timer_init(void) {
+    current_time = 0;
+}
 
-void timer_clear(void) { current_time = 0; }
+void timer_clear(void) {
+    current_time = 0;
+}
 
-uint16_t timer_read(void) { return current_time & 0xFFFF; }
+uint16_t timer_read(void) {
-uint32_t timer_read32(void) { return current_time; }
+    return current_time & 0xFFFF;
-uint16_t timer_elapsed(uint16_t last) { return TIMER_DIFF_16(timer_read(), last); }
+}
-uint32_t timer_elapsed32(uint32_t last) { return TIMER_DIFF_32(timer_read32(), last); }
+uint32_t timer_read32(void) {
+    return current_time;
+}
+uint16_t timer_elapsed(uint16_t last) {
+    return TIMER_DIFF_16(timer_read(), last);
+}
+uint32_t timer_elapsed32(uint32_t last) {
+    return TIMER_DIFF_32(timer_read32(), last);
+}
 
-void set_time(uint32_t t) { current_time = t; }
+void set_time(uint32_t t) {
-void advance_time(uint32_t ms) { current_time += ms; }
+    current_time = t;
+}
+void advance_time(uint32_t ms) {
+    current_time += ms;
+}
 
-void wait_ms(uint32_t ms) { advance_time(ms); }
+void wait_ms(uint32_t ms) {
+    advance_time(ms);
+}

platforms/timer.h

@@ -52,14 +52,22 @@ uint32_t timer_elapsed32(uint32_t last);
 #    define TIMER_DIFF_FAST(a, b) TIMER_DIFF_16(a, b)
 #    define timer_expired_fast(current, future) timer_expired(current, future)
 typedef uint16_t fast_timer_t;
-fast_timer_t inline timer_read_fast(void) { return timer_read(); }
+fast_timer_t inline timer_read_fast(void) {
-fast_timer_t inline timer_elapsed_fast(fast_timer_t last) { return timer_elapsed(last); }
+    return timer_read();
+}
+fast_timer_t inline timer_elapsed_fast(fast_timer_t last) {
+    return timer_elapsed(last);
+}
 #else
 #    define TIMER_DIFF_FAST(a, b) TIMER_DIFF_32(a, b)
 #    define timer_expired_fast(current, future) timer_expired32(current, future)
 typedef uint32_t fast_timer_t;
-fast_timer_t inline timer_read_fast(void) { return timer_read32(); }
+fast_timer_t inline timer_read_fast(void) {
-fast_timer_t inline timer_elapsed_fast(fast_timer_t last) { return timer_elapsed32(last); }
+    return timer_read32();
+}
+fast_timer_t inline timer_elapsed_fast(fast_timer_t last) {
+    return timer_elapsed32(last);
+}
 #endif
 
 #ifdef __cplusplus

quantum/action.c

@@ -53,14 +53,20 @@ int retro_tapping_counter = 0;
 #endif
 
 #ifdef IGNORE_MOD_TAP_INTERRUPT_PER_KEY
-__attribute__((weak)) bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) { return false; }
+__attribute__((weak)) bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) {
+    return false;
+}
 #endif
 
 #ifdef RETRO_TAPPING_PER_KEY
-__attribute__((weak)) bool get_retro_tapping(uint16_t keycode, keyrecord_t *record) { return false; }
+__attribute__((weak)) bool get_retro_tapping(uint16_t keycode, keyrecord_t *record) {
+    return false;
+}
 #endif
 
-__attribute__((weak)) bool pre_process_record_quantum(keyrecord_t *record) { return true; }
+__attribute__((weak)) bool pre_process_record_quantum(keyrecord_t *record) {
+    return true;
+}
 
 /** \brief Called to execute an action.
  *
@@ -163,10 +169,14 @@ void process_record_nocache(keyrecord_t *record) {
     disable_action_cache = false;
 }
 #else
-void process_record_nocache(keyrecord_t *record) { process_record(record); }
+void process_record_nocache(keyrecord_t *record) {
+    process_record(record);
+}
 #endif
 
-__attribute__((weak)) bool process_record_quantum(keyrecord_t *record) { return true; }
+__attribute__((weak)) bool process_record_quantum(keyrecord_t *record) {
+    return true;
+}
 
 __attribute__((weak)) void post_process_record_quantum(keyrecord_t *record) {}
 
@@ -862,9 +872,13 @@ __attribute__((weak)) void register_code(uint8_t code) {
         }
 #ifdef EXTRAKEY_ENABLE
     else if
-        IS_SYSTEM(code) { host_system_send(KEYCODE2SYSTEM(code)); }
+        IS_SYSTEM(code) {
+            host_system_send(KEYCODE2SYSTEM(code));
+        }
     else if
-        IS_CONSUMER(code) { host_consumer_send(KEYCODE2CONSUMER(code)); }
+        IS_CONSUMER(code) {
+            host_consumer_send(KEYCODE2CONSUMER(code));
+        }
 #endif
 #ifdef MOUSEKEY_ENABLE
     else if
@@ -927,9 +941,13 @@ __attribute__((weak)) void unregister_code(uint8_t code) {
             send_keyboard_report();
         }
     else if
-        IS_SYSTEM(code) { host_system_send(0); }
+        IS_SYSTEM(code) {
+            host_system_send(0);
+        }
     else if
-        IS_CONSUMER(code) { host_consumer_send(0); }
+        IS_CONSUMER(code) {
+            host_consumer_send(0);
+        }
 #ifdef MOUSEKEY_ENABLE
     else if
         IS_MOUSEKEY(code) {
@@ -956,7 +974,9 @@ __attribute__((weak)) void tap_code_delay(uint8_t code, uint16_t delay) {
  *
  * \param code The basic keycode to tap. If `code` is `KC_CAPS_LOCK`, the delay will be `TAP_HOLD_CAPS_DELAY`, otherwise `TAP_CODE_DELAY`, if defined.
  */
-__attribute__((weak)) void tap_code(uint8_t code) { tap_code_delay(code, code == KC_CAPS_LOCK ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); }
+__attribute__((weak)) void tap_code(uint8_t code) {
+    tap_code_delay(code, code == KC_CAPS_LOCK ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY);
+}
 
 /** \brief Adds the given physically pressed modifiers and sends a keyboard report immediately.
  *
@@ -1100,7 +1120,9 @@ bool is_tap_action(action_t action) {
  *
  * FIXME: Needs documentation.
  */
-void debug_event(keyevent_t event) { dprintf("%04X%c(%u)", (event.key.row << 8 | event.key.col), (event.pressed ? 'd' : 'u'), event.time); }
+void debug_event(keyevent_t event) {
+    dprintf("%04X%c(%u)", (event.key.row << 8 | event.key.col), (event.pressed ? 'd' : 'u'), event.time);
+}
 /** \brief Debug print (FIXME: Needs better description)
  *
  * FIXME: Needs documentation.

quantum/action_layer.c

@@ -18,13 +18,17 @@ layer_state_t default_layer_state = 0;
  *
  * Run user code on default layer state change
  */
-__attribute__((weak)) layer_state_t default_layer_state_set_user(layer_state_t state) { return state; }
+__attribute__((weak)) layer_state_t default_layer_state_set_user(layer_state_t state) {
+    return state;
+}
 
 /** \brief Default Layer State Set At Keyboard Level
  *
  *  Run keyboard code on default layer state change
  */
-__attribute__((weak)) layer_state_t default_layer_state_set_kb(layer_state_t state) { return default_layer_state_set_user(state); }
+__attribute__((weak)) layer_state_t default_layer_state_set_kb(layer_state_t state) {
+    return default_layer_state_set_user(state);
+}
 
 /** \brief Default Layer State Set
  *
@@ -49,30 +53,40 @@ static void default_layer_state_set(layer_state_t state) {
  *
  * Print out the hex value of the 32-bit default layer state, as well as the value of the highest bit.
  */
-void default_layer_debug(void) { dprintf("%08lX(%u)", default_layer_state, get_highest_layer(default_layer_state)); }
+void default_layer_debug(void) {
+    dprintf("%08lX(%u)", default_layer_state, get_highest_layer(default_layer_state));
+}
 
 /** \brief Default Layer Set
  *
  * Sets the default layer state.
  */
-void default_layer_set(layer_state_t state) { default_layer_state_set(state); }
+void default_layer_set(layer_state_t state) {
+    default_layer_state_set(state);
+}
 
 #ifndef NO_ACTION_LAYER
 /** \brief Default Layer Or
  *
  * Turns on the default layer based on matching bits between specifed layer and existing layer state
  */
-void default_layer_or(layer_state_t state) { default_layer_state_set(default_layer_state | state); }
+void default_layer_or(layer_state_t state) {
+    default_layer_state_set(default_layer_state | state);
+}
 /** \brief Default Layer And
  *
  * Turns on default layer based on matching enabled bits between specifed layer and existing layer state
  */
-void default_layer_and(layer_state_t state) { default_layer_state_set(default_layer_state & state); }
+void default_layer_and(layer_state_t state) {
+    default_layer_state_set(default_layer_state & state);
+}
 /** \brief Default Layer Xor
  *
  * Turns on default layer based on non-matching bits between specifed layer and existing layer state
  */
-void default_layer_xor(layer_state_t state) { default_layer_state_set(default_layer_state ^ state); }
+void default_layer_xor(layer_state_t state) {
+    default_layer_state_set(default_layer_state ^ state);
+}
 #endif
 
 #ifndef NO_ACTION_LAYER
@@ -84,13 +98,17 @@ layer_state_t layer_state = 0;
  *
  * Runs user code on layer state change
  */
-__attribute__((weak)) layer_state_t layer_state_set_user(layer_state_t state) { return state; }
+__attribute__((weak)) layer_state_t layer_state_set_user(layer_state_t state) {
+    return state;
+}
 
 /** \brief Layer state set keyboard
  *
  * Runs keyboard code on layer state change
  */
-__attribute__((weak)) layer_state_t layer_state_set_kb(layer_state_t state) { return layer_state_set_user(state); }
+__attribute__((weak)) layer_state_t layer_state_set_kb(layer_state_t state) {
+    return layer_state_set_user(state);
+}
 
 /** \brief Layer state set
  *
@@ -115,13 +133,17 @@ void layer_state_set(layer_state_t state) {
  *
  * Turn off all layers
  */
-void layer_clear(void) { layer_state_set(0); }
+void layer_clear(void) {
+    layer_state_set(0);
+}
 
 /** \brief Layer state is
  *
  * Return whether the given state is on (it might still be shadowed by a higher state, though)
  */
-bool layer_state_is(uint8_t layer) { return layer_state_cmp(layer_state, layer); }
+bool layer_state_is(uint8_t layer) {
+    return layer_state_cmp(layer_state, layer);
+}
 
 /** \brief Layer state compare
  *
@@ -138,47 +160,63 @@ bool layer_state_cmp(layer_state_t cmp_layer_state, uint8_t layer) {
  *
  * Turns on the given layer and turn off all other layers
  */
-void layer_move(uint8_t layer) { layer_state_set((layer_state_t)1 << layer); }
+void layer_move(uint8_t layer) {
+    layer_state_set((layer_state_t)1 << layer);
+}
 
 /** \brief Layer on
  *
  * Turns on given layer
  */
-void layer_on(uint8_t layer) { layer_state_set(layer_state | ((layer_state_t)1 << layer)); }
+void layer_on(uint8_t layer) {
+    layer_state_set(layer_state | ((layer_state_t)1 << layer));
+}
 
 /** \brief Layer off
  *
  * Turns off given layer
  */
-void layer_off(uint8_t layer) { layer_state_set(layer_state & ~((layer_state_t)1 << layer)); }
+void layer_off(uint8_t layer) {
+    layer_state_set(layer_state & ~((layer_state_t)1 << layer));
+}
 
 /** \brief Layer invert
  *
  * Toggle the given layer (set it if it's unset, or unset it if it's set)
  */
-void layer_invert(uint8_t layer) { layer_state_set(layer_state ^ ((layer_state_t)1 << layer)); }
+void layer_invert(uint8_t layer) {
+    layer_state_set(layer_state ^ ((layer_state_t)1 << layer));
+}
 
 /** \brief Layer or
  *
  * Turns on layers based on matching bits between specifed layer and existing layer state
  */
-void layer_or(layer_state_t state) { layer_state_set(layer_state | state); }
+void layer_or(layer_state_t state) {
+    layer_state_set(layer_state | state);
+}
 /** \brief Layer and
  *
  * Turns on layers based on matching enabled bits between specifed layer and existing layer state
  */
-void layer_and(layer_state_t state) { layer_state_set(layer_state & state); }
+void layer_and(layer_state_t state) {
+    layer_state_set(layer_state & state);
+}
 /** \brief Layer xor
  *
  * Turns on layers based on non-matching bits between specifed layer and existing layer state
  */
-void layer_xor(layer_state_t state) { layer_state_set(layer_state ^ state); }
+void layer_xor(layer_state_t state) {
+    layer_state_set(layer_state ^ state);
+}
 
 /** \brief Layer debug printing
  *
  * Print out the hex value of the 32-bit layer state, as well as the value of the highest bit.
  */
-void layer_debug(void) { dprintf("%08lX(%u)", layer_state, get_highest_layer(layer_state)); }
+void layer_debug(void) {
+    dprintf("%08lX(%u)", layer_state, get_highest_layer(layer_state));
+}
 #endif
 
 #if !defined(NO_ACTION_LAYER) && !defined(STRICT_LAYER_RELEASE)
@@ -276,4 +314,6 @@ uint8_t layer_switch_get_layer(keypos_t key) {
  *
  * Gets action code based on key position
  */
-action_t layer_switch_get_action(keypos_t key) { return action_for_key(layer_switch_get_layer(key), key); }
+action_t layer_switch_get_action(keypos_t key) {
+    return action_for_key(layer_switch_get_layer(key), key);
+}

quantum/action_tapping.c

@@ -26,7 +26,9 @@
 
 uint16_t g_tapping_term = TAPPING_TERM;
 
-__attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { return g_tapping_term; }
+__attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) {
+    return g_tapping_term;
+}
 
 #    ifdef TAPPING_TERM_PER_KEY
 #        define WITHIN_TAPPING_TERM(e) (TIMER_DIFF_16(e.time, tapping_key.event.time) < get_tapping_term(get_record_keycode(&tapping_key, false), &tapping_key))
@@ -35,15 +37,21 @@ __attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *r
 #    endif
 
 #    ifdef TAPPING_FORCE_HOLD_PER_KEY
-__attribute__((weak)) bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) { return false; }
+__attribute__((weak)) bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) {
+    return false;
+}
 #    endif
 
 #    ifdef PERMISSIVE_HOLD_PER_KEY
-__attribute__((weak)) bool get_permissive_hold(uint16_t keycode, keyrecord_t *record) { return false; }
+__attribute__((weak)) bool get_permissive_hold(uint16_t keycode, keyrecord_t *record) {
+    return false;
+}
 #    endif
 
 #    ifdef HOLD_ON_OTHER_KEY_PRESS_PER_KEY
-__attribute__((weak)) bool get_hold_on_other_key_press(uint16_t keycode, keyrecord_t *record) { return false; }
+__attribute__((weak)) bool get_hold_on_other_key_press(uint16_t keycode, keyrecord_t *record) {
+    return false;
+}
 #    endif
 
 #    if defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT)

quantum/action_util.c

@@ -43,7 +43,9 @@ extern inline void clear_keys(void);
 #ifndef NO_ACTION_ONESHOT
 static uint8_t oneshot_mods        = 0;
 static uint8_t oneshot_locked_mods = 0;
-uint8_t        get_oneshot_locked_mods(void) { return oneshot_locked_mods; }
+uint8_t        get_oneshot_locked_mods(void) {
+    return oneshot_locked_mods;
+}
 void set_oneshot_locked_mods(uint8_t mods) {
     if (mods != oneshot_locked_mods) {
         oneshot_locked_mods = mods;
@@ -58,9 +60,13 @@ void clear_oneshot_locked_mods(void) {
 }
 #    if (defined(ONESHOT_TIMEOUT) && (ONESHOT_TIMEOUT > 0))
 static uint16_t oneshot_time = 0;
-bool            has_oneshot_mods_timed_out(void) { return TIMER_DIFF_16(timer_read(), oneshot_time) >= ONESHOT_TIMEOUT; }
+bool            has_oneshot_mods_timed_out(void) {
+    return TIMER_DIFF_16(timer_read(), oneshot_time) >= ONESHOT_TIMEOUT;
+}
 #    else
-bool has_oneshot_mods_timed_out(void) { return false; }
+bool has_oneshot_mods_timed_out(void) {
+    return false;
+}
 #    endif
 #endif
 
@@ -74,8 +80,12 @@ bool has_oneshot_mods_timed_out(void) { return false; }
  */
 static int8_t oneshot_layer_data = 0;
 
-inline uint8_t get_oneshot_layer(void) { return oneshot_layer_data >> 3; }
+inline uint8_t get_oneshot_layer(void) {
-inline uint8_t get_oneshot_layer_state(void) { return oneshot_layer_data & 0b111; }
+    return oneshot_layer_data >> 3;
+}
+inline uint8_t get_oneshot_layer_state(void) {
+    return oneshot_layer_data & 0b111;
+}
 
 #    ifdef SWAP_HANDS_ENABLE
 enum {
@@ -88,10 +98,14 @@ enum {
 
 #    if (defined(ONESHOT_TIMEOUT) && (ONESHOT_TIMEOUT > 0))
 static uint16_t oneshot_layer_time = 0;
-inline bool     has_oneshot_layer_timed_out() { return TIMER_DIFF_16(timer_read(), oneshot_layer_time) >= ONESHOT_TIMEOUT && !(get_oneshot_layer_state() & ONESHOT_TOGGLED); }
+inline bool     has_oneshot_layer_timed_out() {
+    return TIMER_DIFF_16(timer_read(), oneshot_layer_time) >= ONESHOT_TIMEOUT && !(get_oneshot_layer_state() & ONESHOT_TOGGLED);
+}
 #        ifdef SWAP_HANDS_ENABLE
 static uint16_t oneshot_swaphands_time = 0;
-inline bool     has_oneshot_swaphands_timed_out() { return TIMER_DIFF_16(timer_read(), oneshot_swaphands_time) >= ONESHOT_TIMEOUT && (swap_hands_oneshot == SHO_ACTIVE); }
+inline bool     has_oneshot_swaphands_timed_out() {
+    return TIMER_DIFF_16(timer_read(), oneshot_swaphands_time) >= ONESHOT_TIMEOUT && (swap_hands_oneshot == SHO_ACTIVE);
+}
 #        endif
 #    endif
 
@@ -179,7 +193,9 @@ void clear_oneshot_layer_state(oneshot_fullfillment_t state) {
  *
  * FIXME: needs doc
  */
-bool is_oneshot_layer_active(void) { return get_oneshot_layer_state(); }
+bool is_oneshot_layer_active(void) {
+    return get_oneshot_layer_state();
+}
 
 /** \brief set oneshot
  *
@@ -198,21 +214,29 @@ void oneshot_set(bool active) {
  *
  * FIXME: needs doc
  */
-void oneshot_toggle(void) { oneshot_set(!keymap_config.oneshot_disable); }
+void oneshot_toggle(void) {
+    oneshot_set(!keymap_config.oneshot_disable);
+}
 
 /** \brief enable oneshot
  *
  * FIXME: needs doc
  */
-void oneshot_enable(void) { oneshot_set(true); }
+void oneshot_enable(void) {
+    oneshot_set(true);
+}
 
 /** \brief disable oneshot
  *
  * FIXME: needs doc
  */
-void oneshot_disable(void) { oneshot_set(false); }
+void oneshot_disable(void) {
+    oneshot_set(false);
+}
 
-bool is_oneshot_enabled(void) { return keymap_config.oneshot_disable; }
+bool is_oneshot_enabled(void) {
+    return keymap_config.oneshot_disable;
+}
 
 #endif
 
@@ -259,68 +283,96 @@ void send_keyboard_report(void) {
  *
  * FIXME: needs doc
  */
-uint8_t get_mods(void) { return real_mods; }
+uint8_t get_mods(void) {
+    return real_mods;
+}
 /** \brief add mods
  *
  * FIXME: needs doc
  */
-void add_mods(uint8_t mods) { real_mods |= mods; }
+void add_mods(uint8_t mods) {
+    real_mods |= mods;
+}
 /** \brief del mods
  *
  * FIXME: needs doc
  */
-void del_mods(uint8_t mods) { real_mods &= ~mods; }
+void del_mods(uint8_t mods) {
+    real_mods &= ~mods;
+}
 /** \brief set mods
  *
  * FIXME: needs doc
  */
-void set_mods(uint8_t mods) { real_mods = mods; }
+void set_mods(uint8_t mods) {
+    real_mods = mods;
+}
 /** \brief clear mods
  *
  * FIXME: needs doc
  */
-void clear_mods(void) { real_mods = 0; }
+void clear_mods(void) {
+    real_mods = 0;
+}
 
 /** \brief get weak mods
  *
  * FIXME: needs doc
  */
-uint8_t get_weak_mods(void) { return weak_mods; }
+uint8_t get_weak_mods(void) {
+    return weak_mods;
+}
 /** \brief add weak mods
  *
  * FIXME: needs doc
  */
-void add_weak_mods(uint8_t mods) { weak_mods |= mods; }
+void add_weak_mods(uint8_t mods) {
+    weak_mods |= mods;
+}
 /** \brief del weak mods
  *
  * FIXME: needs doc
  */
-void del_weak_mods(uint8_t mods) { weak_mods &= ~mods; }
+void del_weak_mods(uint8_t mods) {
+    weak_mods &= ~mods;
+}
 /** \brief set weak mods
  *
  * FIXME: needs doc
  */
-void set_weak_mods(uint8_t mods) { weak_mods = mods; }
+void set_weak_mods(uint8_t mods) {
+    weak_mods = mods;
+}
 /** \brief clear weak mods
  *
  * FIXME: needs doc
  */
-void clear_weak_mods(void) { weak_mods = 0; }
+void clear_weak_mods(void) {
+    weak_mods = 0;
+}
 
 #ifdef KEY_OVERRIDE_ENABLE
 /** \brief set weak mods used by key overrides. DO not call this manually
  */
-void set_weak_override_mods(uint8_t mods) { weak_override_mods = mods; }
+void set_weak_override_mods(uint8_t mods) {
+    weak_override_mods = mods;
+}
 /** \brief clear weak mods used by key overrides. DO not call this manually
  */
-void clear_weak_override_mods(void) { weak_override_mods = 0; }
+void clear_weak_override_mods(void) {
+    weak_override_mods = 0;
+}
 
 /** \brief set suppressed mods used by key overrides. DO not call this manually
  */
-void set_suppressed_override_mods(uint8_t mods) { suppressed_mods = mods; }
+void set_suppressed_override_mods(uint8_t mods) {
+    suppressed_mods = mods;
+}
 /** \brief clear suppressed mods used by key overrides. DO not call this manually
  */
-void clear_suppressed_override_mods(void) { suppressed_mods = 0; }
+void clear_suppressed_override_mods(void) {
+    suppressed_mods = 0;
+}
 #endif
 
 #ifndef NO_ACTION_ONESHOT
@@ -328,7 +380,9 @@ void clear_suppressed_override_mods(void) { suppressed_mods = 0; }
  *
  * FIXME: needs doc
  */
-uint8_t get_oneshot_mods(void) { return oneshot_mods; }
+uint8_t get_oneshot_mods(void) {
+    return oneshot_mods;
+}
 
 void add_oneshot_mods(uint8_t mods) {
     if ((oneshot_mods & mods) != mods) {
@@ -391,7 +445,9 @@ __attribute__((weak)) void oneshot_locked_mods_changed_user(uint8_t mods) {}
  *
  * \param mods Contains the active modifiers active after the change.
  */
-__attribute__((weak)) void oneshot_locked_mods_changed_kb(uint8_t mods) { oneshot_locked_mods_changed_user(mods); }
+__attribute__((weak)) void oneshot_locked_mods_changed_kb(uint8_t mods) {
+    oneshot_locked_mods_changed_user(mods);
+}
 
 /** \brief Called when the one shot modifiers have been changed.
  *
@@ -403,7 +459,9 @@ __attribute__((weak)) void oneshot_mods_changed_user(uint8_t mods) {}
  *
  * \param mods Contains the active modifiers active after the change.
  */
-__attribute__((weak)) void oneshot_mods_changed_kb(uint8_t mods) { oneshot_mods_changed_user(mods); }
+__attribute__((weak)) void oneshot_mods_changed_kb(uint8_t mods) {
+    oneshot_mods_changed_user(mods);
+}
 
 /** \brief Called when the one shot layers have been changed.
  *
@@ -415,10 +473,14 @@ __attribute__((weak)) void oneshot_layer_changed_user(uint8_t layer) {}
  *
  * \param layer Contains the layer that is toggled on, or zero when toggled off.
  */
-__attribute__((weak)) void oneshot_layer_changed_kb(uint8_t layer) { oneshot_layer_changed_user(layer); }
+__attribute__((weak)) void oneshot_layer_changed_kb(uint8_t layer) {
+    oneshot_layer_changed_user(layer);
+}
 
 /** \brief inspect keyboard state
  *
  * FIXME: needs doc
  */
-uint8_t has_anymod(void) { return bitpop(real_mods); }
+uint8_t has_anymod(void) {
+    return bitpop(real_mods);
+}

quantum/action_util.h

@@ -29,11 +29,17 @@ extern report_keyboard_t *keyboard_report;
 void send_keyboard_report(void);
 
 /* key */
-inline void add_key(uint8_t key) { add_key_to_report(keyboard_report, key); }
+inline void add_key(uint8_t key) {
+    add_key_to_report(keyboard_report, key);
+}
 
-inline void del_key(uint8_t key) { del_key_from_report(keyboard_report, key); }
+inline void del_key(uint8_t key) {
+    del_key_from_report(keyboard_report, key);
+}
 
-inline void clear_keys(void) { clear_keys_from_report(keyboard_report); }
+inline void clear_keys(void) {
+    clear_keys_from_report(keyboard_report);
+}
 
 /* modifier */
 uint8_t get_mods(void);

quantum/audio/audio.c

@@ -181,7 +181,9 @@ void audio_off(void) {
     eeconfig_update_audio(audio_config.raw);
 }
 
-bool audio_is_on(void) { return (audio_config.enable != 0); }
+bool audio_is_on(void) {
+    return (audio_config.enable != 0);
+}
 
 void audio_stop_all() {
     if (audio_driver_stopped) {
@@ -294,7 +296,9 @@ void audio_play_note(float pitch, uint16_t duration) {
     }
 }
 
-void audio_play_tone(float pitch) { audio_play_note(pitch, 0xffff); }
+void audio_play_tone(float pitch) {
+    audio_play_note(pitch, 0xffff);
+}
 
 void audio_play_melody(float (*np)[][2], uint16_t n_count, bool n_repeat) {
     if (!audio_config.enable) {
@@ -347,11 +351,17 @@ void  audio_play_click(uint16_t delay, float pitch, uint16_t duration) {
     }
 }
 
-bool audio_is_playing_note(void) { return playing_note; }
+bool audio_is_playing_note(void) {
+    return playing_note;
+}
 
-bool audio_is_playing_melody(void) { return playing_melody; }
+bool audio_is_playing_melody(void) {
+    return playing_melody;
+}
 
-uint8_t audio_get_number_of_active_tones(void) { return active_tones; }
+uint8_t audio_get_number_of_active_tones(void) {
+    return active_tones;
+}
 
 float audio_get_frequency(uint8_t tone_index) {
     if (tone_index >= active_tones) {
@@ -487,9 +497,15 @@ bool audio_update_state(void) {
 
 // Tone-multiplexing functions
 #ifdef AUDIO_ENABLE_TONE_MULTIPLEXING
-void audio_set_tone_multiplexing_rate(uint16_t rate) { tone_multiplexing_rate = rate; }
+void audio_set_tone_multiplexing_rate(uint16_t rate) {
-void audio_enable_tone_multiplexing(void) { tone_multiplexing_rate = AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT; }
+    tone_multiplexing_rate = rate;
-void audio_disable_tone_multiplexing(void) { tone_multiplexing_rate = 0; }
+}
+void audio_enable_tone_multiplexing(void) {
+    tone_multiplexing_rate = AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT;
+}
+void audio_disable_tone_multiplexing(void) {
+    tone_multiplexing_rate = 0;
+}
 void audio_increase_tone_multiplexing_rate(uint16_t change) {
     if ((0xffff - change) > tone_multiplexing_rate) {
         tone_multiplexing_rate += change;

quantum/audio/voices.c

@@ -32,11 +32,17 @@ voice_type voice = AUDIO_VOICE_DEFAULT;
 voice_type voice = default_voice;
 #endif
 
-void set_voice(voice_type v) { voice = v; }
+void set_voice(voice_type v) {
+    voice = v;
+}
 
-void voice_iterate() { voice = (voice + 1) % number_of_voices; }
+void voice_iterate() {
+    voice = (voice + 1) % number_of_voices;
+}
 
-void voice_deiterate() { voice = (voice - 1 + number_of_voices) % number_of_voices; }
+void voice_deiterate() {
+    voice = (voice - 1 + number_of_voices) % number_of_voices;
+}
 
 #ifdef AUDIO_VOICES
 float mod(float a, int b) {
@@ -325,12 +331,24 @@ float voice_envelope(float frequency) {
 
 // Vibrato functions
 
-void voice_set_vibrato_rate(float rate) { vibrato_rate = rate; }
+void voice_set_vibrato_rate(float rate) {
-void voice_increase_vibrato_rate(float change) { vibrato_rate *= change; }
+    vibrato_rate = rate;
-void voice_decrease_vibrato_rate(float change) { vibrato_rate /= change; }
+}
-void voice_set_vibrato_strength(float strength) { vibrato_strength = strength; }
+void voice_increase_vibrato_rate(float change) {
-void voice_increase_vibrato_strength(float change) { vibrato_strength *= change; }
+    vibrato_rate *= change;
-void voice_decrease_vibrato_strength(float change) { vibrato_strength /= change; }
+}
+void voice_decrease_vibrato_rate(float change) {
+    vibrato_rate /= change;
+}
+void voice_set_vibrato_strength(float strength) {
+    vibrato_strength = strength;
+}
+void voice_increase_vibrato_strength(float change) {
+    vibrato_strength *= change;
+}
+void voice_decrease_vibrato_strength(float change) {
+    vibrato_strength /= change;
+}
 
 // Timbre functions
 
@@ -339,4 +357,6 @@ void voice_set_timbre(uint8_t timbre) {
         note_timbre = timbre;
     }
 }
-uint8_t voice_get_timbre(void) { return note_timbre; }
+uint8_t voice_get_timbre(void) {
+    return note_timbre;
+}

quantum/backlight/backlight.c

@@ -122,7 +122,9 @@ void backlight_disable(void) {
  *
  * FIXME: needs doc
  */
-bool is_backlight_enabled(void) { return backlight_config.enable; }
+bool is_backlight_enabled(void) {
+    return backlight_config.enable;
+}
 
 /** \brief Backlight step through levels
  *
@@ -158,11 +160,17 @@ void backlight_level(uint8_t level) {
     eeconfig_update_backlight(backlight_config.raw);
 }
 
-uint8_t eeconfig_read_backlight(void) { return eeprom_read_byte(EECONFIG_BACKLIGHT); }
+uint8_t eeconfig_read_backlight(void) {
+    return eeprom_read_byte(EECONFIG_BACKLIGHT);
+}
 
-void eeconfig_update_backlight(uint8_t val) { eeprom_update_byte(EECONFIG_BACKLIGHT, val); }
+void eeconfig_update_backlight(uint8_t val) {
+    eeprom_update_byte(EECONFIG_BACKLIGHT, val);
+}
 
-void eeconfig_update_backlight_current(void) { eeconfig_update_backlight(backlight_config.raw); }
+void eeconfig_update_backlight_current(void) {
+    eeconfig_update_backlight(backlight_config.raw);
+}
 
 void eeconfig_update_backlight_default(void) {
     backlight_config.enable = 1;
@@ -179,7 +187,9 @@ void eeconfig_update_backlight_default(void) {
  *
  * FIXME: needs doc
  */
-uint8_t get_backlight_level(void) { return backlight_config.level; }
+uint8_t get_backlight_level(void) {
+    return backlight_config.level;
+}
 
 #ifdef BACKLIGHT_BREATHING
 /** \brief Backlight breathing toggle
@@ -225,18 +235,30 @@ void backlight_disable_breathing(void) {
  *
  * FIXME: needs doc
  */
-bool is_backlight_breathing(void) { return backlight_config.breathing; }
+bool is_backlight_breathing(void) {
+    return backlight_config.breathing;
+}
 
 // following are marked as weak purely for backwards compatibility
-__attribute__((weak)) void breathing_period_set(uint8_t value) { breathing_period = value ? value : 1; }
+__attribute__((weak)) void breathing_period_set(uint8_t value) {
+    breathing_period = value ? value : 1;
+}
 
-__attribute__((weak)) uint8_t get_breathing_period(void) { return breathing_period; }
+__attribute__((weak)) uint8_t get_breathing_period(void) {
+    return breathing_period;
+}
 
-__attribute__((weak)) void breathing_period_default(void) { breathing_period_set(BREATHING_PERIOD); }
+__attribute__((weak)) void breathing_period_default(void) {
+    breathing_period_set(BREATHING_PERIOD);
+}
 
-__attribute__((weak)) void breathing_period_inc(void) { breathing_period_set(breathing_period + 1); }
+__attribute__((weak)) void breathing_period_inc(void) {
+    breathing_period_set(breathing_period + 1);
+}
 
-__attribute__((weak)) void breathing_period_dec(void) { breathing_period_set(breathing_period - 1); }
+__attribute__((weak)) void breathing_period_dec(void) {
+    breathing_period_set(breathing_period - 1);
+}
 
 __attribute__((weak)) void breathing_toggle(void) {
     if (is_breathing())

quantum/backlight/backlight_avr.c

@@ -203,7 +203,9 @@ static inline void disable_pwm(void) {
 // or F_CPU/BACKLIGHT_CUSTOM_RESOLUTION if used.
 
 // Triggered when the counter reaches the OCRx value
-ISR(TIMERx_COMPA_vect) { backlight_pins_off(); }
+ISR(TIMERx_COMPA_vect) {
+    backlight_pins_off();
+}
 
 // Triggered when the counter reaches the TOP value
 // this one triggers at F_CPU/ICRx = 16MHz/65536 =~ 244 Hz
@@ -249,10 +251,14 @@ static uint16_t cie_lightness(uint16_t v) {
 }
 
 // rescale the supplied backlight value to be in terms of the value limit	// range for val is [0..ICRx]. PWM pin is high while the timer count is below val.
-static uint32_t rescale_limit_val(uint32_t val) { return (val * (BACKLIGHT_LIMIT_VAL + 1)) / 256; }
+static uint32_t rescale_limit_val(uint32_t val) {
+    return (val * (BACKLIGHT_LIMIT_VAL + 1)) / 256;
+}
 
 // range for val is [0..ICRx]. PWM pin is high while the timer count is below val.
-static inline void set_pwm(uint16_t val) { OCRxx = val; }
+static inline void set_pwm(uint16_t val) {
+    OCRxx = val;
+}
 
 void backlight_set(uint8_t level) {
     if (level > BACKLIGHT_LEVELS) level = BACKLIGHT_LEVELS;
@@ -303,7 +309,9 @@ static uint16_t breathing_freq_scale_factor = 2;
 #    ifdef BACKLIGHT_PWM_TIMER
 static bool breathing = false;
 
-bool is_breathing(void) { return breathing; }
+bool is_breathing(void) {
+    return breathing;
+}
 
 #        define breathing_interrupt_enable() \
             do {                             \
@@ -315,7 +323,9 @@ bool is_breathing(void) { return breathing; }
             } while (0)
 #    else
 
-bool is_breathing(void) { return !!(TIMSKx & _BV(TOIEx)); }
+bool is_breathing(void) {
+    return !!(TIMSKx & _BV(TOIEx));
+}
 
 #        define breathing_interrupt_enable() \
             do {                             \
@@ -370,7 +380,9 @@ void breathing_self_disable(void) {
 static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
 
 // Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) { return v / BACKLIGHT_LEVELS * get_backlight_level(); }
+static inline uint16_t scale_backlight(uint16_t v) {
+    return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
 
 #    ifdef BACKLIGHT_PWM_TIMER
 void breathing_task(void)

quantum/backlight/backlight_chibios.c

@@ -117,7 +117,9 @@ static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0,
 
 void breathing_callback(PWMDriver *pwmp);
 
-bool is_breathing(void) { return pwmCFG.callback != NULL; }
+bool is_breathing(void) {
+    return pwmCFG.callback != NULL;
+}
 
 void breathing_enable(void) {
     pwmCFG.callback = breathing_callback;
@@ -133,7 +135,9 @@ void breathing_disable(void) {
 }
 
 // Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) { return v / BACKLIGHT_LEVELS * get_backlight_level(); }
+static inline uint16_t scale_backlight(uint16_t v) {
+    return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
 
 void breathing_callback(PWMDriver *pwmp) {
     uint8_t  breathing_period = get_breathing_period();

quantum/backlight/backlight_driver_common.c

@@ -44,6 +44,10 @@ void backlight_pins_init(void) {
     FOR_EACH_LED(setPinOutput(backlight_pin); backlight_off(backlight_pin);)
 }
 
-void backlight_pins_on(void) { FOR_EACH_LED(backlight_on(backlight_pin);) }
+void backlight_pins_on(void) {
+    FOR_EACH_LED(backlight_on(backlight_pin);)
+}
 
-void backlight_pins_off(void) { FOR_EACH_LED(backlight_off(backlight_pin);) }
+void backlight_pins_off(void) {
+    FOR_EACH_LED(backlight_off(backlight_pin);)
+}

quantum/backlight/backlight_software.c

@@ -30,11 +30,17 @@ static const uint16_t backlight_duty_table[] = {
 
 // clang-format on
 
-static uint8_t scale_backlight(uint8_t v) { return v * (backlight_duty_table_size - 1) / BACKLIGHT_LEVELS; }
+static uint8_t scale_backlight(uint8_t v) {
+    return v * (backlight_duty_table_size - 1) / BACKLIGHT_LEVELS;
+}
 
-void backlight_init_ports(void) { backlight_pins_init(); }
+void backlight_init_ports(void) {
+    backlight_pins_init();
+}
 
-void backlight_set(uint8_t level) { s_duty_pattern = backlight_duty_table[scale_backlight(level)]; }
+void backlight_set(uint8_t level) {
+    s_duty_pattern = backlight_duty_table[scale_backlight(level)];
+}
 
 void backlight_task(void) {
     static uint8_t backlight_tick = 0;

quantum/backlight/backlight_timer.c

@@ -61,7 +61,9 @@ static void backlight_timer_top(void) {
     }
 }
 
-static void backlight_timer_cmp(void) { backlight_pins_off(); }
+static void backlight_timer_cmp(void) {
+    backlight_pins_off();
+}
 
 void backlight_task(void) {}
 
@@ -77,7 +79,9 @@ static uint16_t breathing_counter = 0;
 static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
 
 // Use this before the cie_lightness function.
-static inline uint16_t scale_backlight(uint16_t v) { return v / BACKLIGHT_LEVELS * get_backlight_level(); }
+static inline uint16_t scale_backlight(uint16_t v) {
+    return v / BACKLIGHT_LEVELS * get_backlight_level();
+}
 
 void breathing_task(void) {
     uint8_t  breathing_period = get_breathing_period();
@@ -91,13 +95,17 @@ void breathing_task(void) {
     backlight_timer_set_duty(cie_lightness(scale_backlight((uint16_t)breathing_table[index] * 256)));
 }
 
-bool is_breathing(void) { return breathing; }
+bool is_breathing(void) {
+    return breathing;
+}
 
 void breathing_enable(void) {
     breathing_counter = 0;
     breathing         = true;
 }
-void breathing_disable(void) { breathing = false; }
+void breathing_disable(void) {
+    breathing = false;
+}
 
 void breathing_pulse(void) {
     backlight_set(is_backlight_enabled() ? 0 : BACKLIGHT_LEVELS);
@@ -140,8 +148,12 @@ static void timerCallback(void) {
     }
 }
 
-static void     backlight_timer_set_duty(uint16_t duty) { s_duty = duty; }
+static void backlight_timer_set_duty(uint16_t duty) {
-static uint16_t backlight_timer_get_duty(void) { return s_duty; }
+    s_duty = duty;
+}
+static uint16_t backlight_timer_get_duty(void) {
+    return s_duty;
+}
 
 // ChibiOS - Map GPT timer onto Software PWM
 static void gptTimerCallback(GPTDriver *gptp) {

quantum/bitwise.c

@@ -20,7 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // bit population - return number of on-bit
 __attribute__((noinline)) uint8_t bitpop(uint8_t bits) {
     uint8_t c;
-    for (c = 0; bits; c++) bits &= bits - 1;
+    for (c = 0; bits; c++)
+        bits &= bits - 1;
     return c;
     /*
         const uint8_t bit_count[] = { 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4 };
@@ -30,13 +31,15 @@ __attribute__((noinline)) uint8_t bitpop(uint8_t bits) {
 
 uint8_t bitpop16(uint16_t bits) {
     uint8_t c;
-    for (c = 0; bits; c++) bits &= bits - 1;
+    for (c = 0; bits; c++)
+        bits &= bits - 1;
     return c;
 }
 
 uint8_t bitpop32(uint32_t bits) {
     uint8_t c;
-    for (c = 0; bits; c++) bits &= bits - 1;
+    for (c = 0; bits; c++)
+        bits &= bits - 1;
     return c;
 }
 

quantum/bootmagic/bootmagic_lite.c

@@ -19,7 +19,9 @@
  *
  * ...just incase someone wants to only change the eeprom behaviour
  */
-__attribute__((weak)) void bootmagic_lite_reset_eeprom(void) { eeconfig_disable(); }
+__attribute__((weak)) void bootmagic_lite_reset_eeprom(void) {
+    eeconfig_disable();
+}
 
 /** \brief The lite version of TMK's bootmagic based on Wilba.
  *
@@ -57,4 +59,6 @@ __attribute__((weak)) void bootmagic_lite(void) {
     }
 }
 
-void bootmagic(void) { bootmagic_lite(); }
+void bootmagic(void) {
+    bootmagic_lite();
+}

quantum/color.c

@@ -104,7 +104,9 @@ RGB hsv_to_rgb(HSV hsv) {
 #endif
 }
 
-RGB hsv_to_rgb_nocie(HSV hsv) { return hsv_to_rgb_impl(hsv, false); }
+RGB hsv_to_rgb_nocie(HSV hsv) {
+    return hsv_to_rgb_impl(hsv, false);
+}
 
 #ifdef RGBW
 #    ifndef MIN

quantum/debounce/sym_defer_pr.c

@@ -69,4 +69,6 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool
     }
 }
 
-bool debounce_active(void) { return true; }
+bool debounce_active(void) {
+    return true;
+}

quantum/debounce/tests/debounce_test_common.cpp

@@ -31,7 +31,9 @@ void set_time(uint32_t t);
 void advance_time(uint32_t ms);
 }
 
-void DebounceTest::addEvents(std::initializer_list<DebounceTestEvent> events) { events_.insert(events_.end(), events.begin(), events.end()); }
+void DebounceTest::addEvents(std::initializer_list<DebounceTestEvent> events) {
+    events_.insert(events_.end(), events.begin(), events.end());
+}
 
 void DebounceTest::runEvents() {
     /* Run the test multiple times, from 1kHz to 10kHz scan rate */

quantum/deferred_exec.c

@@ -157,7 +157,15 @@ void deferred_exec_advanced_task(deferred_executor_t *table, size_t table_count,
 static uint32_t            last_deferred_exec_check                = 0;
 static deferred_executor_t basic_executors[MAX_DEFERRED_EXECUTORS] = {0};
 
-deferred_token defer_exec(uint32_t delay_ms, deferred_exec_callback callback, void *cb_arg) { return defer_exec_advanced(basic_executors, MAX_DEFERRED_EXECUTORS, delay_ms, callback, cb_arg); }
+deferred_token defer_exec(uint32_t delay_ms, deferred_exec_callback callback, void *cb_arg) {
-bool           extend_deferred_exec(deferred_token token, uint32_t delay_ms) { return extend_deferred_exec_advanced(basic_executors, MAX_DEFERRED_EXECUTORS, token, delay_ms); }
+    return defer_exec_advanced(basic_executors, MAX_DEFERRED_EXECUTORS, delay_ms, callback, cb_arg);
-bool           cancel_deferred_exec(deferred_token token) { return cancel_deferred_exec_advanced(basic_executors, MAX_DEFERRED_EXECUTORS, token); }
+}
-void           deferred_exec_task(void) { deferred_exec_advanced_task(basic_executors, MAX_DEFERRED_EXECUTORS, &last_deferred_exec_check); }
+bool extend_deferred_exec(deferred_token token, uint32_t delay_ms) {
+    return extend_deferred_exec_advanced(basic_executors, MAX_DEFERRED_EXECUTORS, token, delay_ms);
+}
+bool cancel_deferred_exec(deferred_token token) {
+    return cancel_deferred_exec_advanced(basic_executors, MAX_DEFERRED_EXECUTORS, token);
+}
+void deferred_exec_task(void) {
+    deferred_exec_advanced_task(basic_executors, MAX_DEFERRED_EXECUTORS, &last_deferred_exec_check);
+}

quantum/digitizer.c

@@ -24,9 +24,13 @@ __attribute__((weak)) void digitizer_send(void) {
     }
 }
 
-__attribute__((weak)) void digitizer_task(void) { digitizer_send(); }
+__attribute__((weak)) void digitizer_task(void) {
+    digitizer_send();
+}
 
-digitizer_t digitizer_get_report(void) { return digitizerReport; }
+digitizer_t digitizer_get_report(void) {
+    return digitizerReport;
+}
 
 void digitizer_set_report(digitizer_t newDigitizerReport) {
     digitizerReport = newDigitizerReport;

quantum/dip_switch.c

@@ -52,13 +52,21 @@ static uint16_t       scan_count;
 static bool dip_switch_state[NUMBER_OF_DIP_SWITCHES]      = {0};
 static bool last_dip_switch_state[NUMBER_OF_DIP_SWITCHES] = {0};
 
-__attribute__((weak)) bool dip_switch_update_user(uint8_t index, bool active) { return true; }
+__attribute__((weak)) bool dip_switch_update_user(uint8_t index, bool active) {
+    return true;
+}
 
-__attribute__((weak)) bool dip_switch_update_kb(uint8_t index, bool active) { return dip_switch_update_user(index, active); }
+__attribute__((weak)) bool dip_switch_update_kb(uint8_t index, bool active) {
+    return dip_switch_update_user(index, active);
+}
 
-__attribute__((weak)) bool dip_switch_update_mask_user(uint32_t state) { return true; }
+__attribute__((weak)) bool dip_switch_update_mask_user(uint32_t state) {
+    return true;
+}
 
-__attribute__((weak)) bool dip_switch_update_mask_kb(uint32_t state) { return dip_switch_update_mask_user(state); }
+__attribute__((weak)) bool dip_switch_update_mask_kb(uint32_t state) {
+    return dip_switch_update_mask_user(state);
+}
 
 void dip_switch_init(void) {
 #ifdef DIP_SWITCH_PINS

quantum/dynamic_keymap.c

@@ -79,7 +79,9 @@
 #    define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE (DYNAMIC_KEYMAP_EEPROM_MAX_ADDR - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + 1)
 #endif
 
-uint8_t dynamic_keymap_get_layer_count(void) { return DYNAMIC_KEYMAP_LAYER_COUNT; }
+uint8_t dynamic_keymap_get_layer_count(void) {
+    return DYNAMIC_KEYMAP_LAYER_COUNT;
+}
 
 void *dynamic_keymap_key_to_eeprom_address(uint8_t layer, uint8_t row, uint8_t column) {
     // TODO: optimize this with some left shifts
@@ -151,9 +153,13 @@ uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key) {
     }
 }
 
-uint8_t dynamic_keymap_macro_get_count(void) { return DYNAMIC_KEYMAP_MACRO_COUNT; }
+uint8_t dynamic_keymap_macro_get_count(void) {
+    return DYNAMIC_KEYMAP_MACRO_COUNT;
+}
 
-uint16_t dynamic_keymap_macro_get_buffer_size(void) { return DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE; }
+uint16_t dynamic_keymap_macro_get_buffer_size(void) {
+    return DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE;
+}
 
 void dynamic_keymap_macro_get_buffer(uint16_t offset, uint16_t size, uint8_t *data) {
     void *   source = (void *)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + offset);

quantum/eeconfig.c

@@ -90,13 +90,17 @@ void eeconfig_init_quantum(void) {
  *
  * FIXME: needs doc
  */
-void eeconfig_init(void) { eeconfig_init_quantum(); }
+void eeconfig_init(void) {
+    eeconfig_init_quantum();
+}
 
 /** \brief eeconfig enable
  *
  * FIXME: needs doc
  */
-void eeconfig_enable(void) { eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER); }
+void eeconfig_enable(void) {
+    eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER);
+}
 
 /** \brief eeconfig disable
  *
@@ -141,29 +145,39 @@ bool eeconfig_is_disabled(void) {
  *
  * FIXME: needs doc
  */
-uint8_t eeconfig_read_debug(void) { return eeprom_read_byte(EECONFIG_DEBUG); }
+uint8_t eeconfig_read_debug(void) {
+    return eeprom_read_byte(EECONFIG_DEBUG);
+}
 /** \brief eeconfig update debug
  *
  * FIXME: needs doc
  */
-void eeconfig_update_debug(uint8_t val) { eeprom_update_byte(EECONFIG_DEBUG, val); }
+void eeconfig_update_debug(uint8_t val) {
+    eeprom_update_byte(EECONFIG_DEBUG, val);
+}
 
 /** \brief eeconfig read default layer
  *
  * FIXME: needs doc
  */
-uint8_t eeconfig_read_default_layer(void) { return eeprom_read_byte(EECONFIG_DEFAULT_LAYER); }
+uint8_t eeconfig_read_default_layer(void) {
+    return eeprom_read_byte(EECONFIG_DEFAULT_LAYER);
+}
 /** \brief eeconfig update default layer
  *
  * FIXME: needs doc
  */
-void eeconfig_update_default_layer(uint8_t val) { eeprom_update_byte(EECONFIG_DEFAULT_LAYER, val); }
+void eeconfig_update_default_layer(uint8_t val) {
+    eeprom_update_byte(EECONFIG_DEFAULT_LAYER, val);
+}
 
 /** \brief eeconfig read keymap
  *
  * FIXME: needs doc
  */
-uint16_t eeconfig_read_keymap(void) { return (eeprom_read_byte(EECONFIG_KEYMAP_LOWER_BYTE) | (eeprom_read_byte(EECONFIG_KEYMAP_UPPER_BYTE) << 8)); }
+uint16_t eeconfig_read_keymap(void) {
+    return (eeprom_read_byte(EECONFIG_KEYMAP_LOWER_BYTE) | (eeprom_read_byte(EECONFIG_KEYMAP_UPPER_BYTE) << 8));
+}
 /** \brief eeconfig update keymap
  *
  * FIXME: needs doc
@@ -177,53 +191,73 @@ void eeconfig_update_keymap(uint16_t val) {
  *
  * FIXME: needs doc
  */
-uint8_t eeconfig_read_audio(void) { return eeprom_read_byte(EECONFIG_AUDIO); }
+uint8_t eeconfig_read_audio(void) {
+    return eeprom_read_byte(EECONFIG_AUDIO);
+}
 /** \brief eeconfig update audio
  *
  * FIXME: needs doc
  */
-void eeconfig_update_audio(uint8_t val) { eeprom_update_byte(EECONFIG_AUDIO, val); }
+void eeconfig_update_audio(uint8_t val) {
+    eeprom_update_byte(EECONFIG_AUDIO, val);
+}
 
 /** \brief eeconfig read kb
  *
  * FIXME: needs doc
  */
-uint32_t eeconfig_read_kb(void) { return eeprom_read_dword(EECONFIG_KEYBOARD); }
+uint32_t eeconfig_read_kb(void) {
+    return eeprom_read_dword(EECONFIG_KEYBOARD);
+}
 /** \brief eeconfig update kb
  *
  * FIXME: needs doc
  */
-void eeconfig_update_kb(uint32_t val) { eeprom_update_dword(EECONFIG_KEYBOARD, val); }
+void eeconfig_update_kb(uint32_t val) {
+    eeprom_update_dword(EECONFIG_KEYBOARD, val);
+}
 
 /** \brief eeconfig read user
  *
  * FIXME: needs doc
  */
-uint32_t eeconfig_read_user(void) { return eeprom_read_dword(EECONFIG_USER); }
+uint32_t eeconfig_read_user(void) {
+    return eeprom_read_dword(EECONFIG_USER);
+}
 /** \brief eeconfig update user
  *
  * FIXME: needs doc
  */
-void eeconfig_update_user(uint32_t val) { eeprom_update_dword(EECONFIG_USER, val); }
+void eeconfig_update_user(uint32_t val) {
+    eeprom_update_dword(EECONFIG_USER, val);
+}
 
 /** \brief eeconfig read haptic
  *
  * FIXME: needs doc
  */
-uint32_t eeconfig_read_haptic(void) { return eeprom_read_dword(EECONFIG_HAPTIC); }
+uint32_t eeconfig_read_haptic(void) {
+    return eeprom_read_dword(EECONFIG_HAPTIC);
+}
 /** \brief eeconfig update haptic
  *
  * FIXME: needs doc
  */
-void eeconfig_update_haptic(uint32_t val) { eeprom_update_dword(EECONFIG_HAPTIC, val); }
+void eeconfig_update_haptic(uint32_t val) {
+    eeprom_update_dword(EECONFIG_HAPTIC, val);
+}
 
 /** \brief eeconfig read split handedness
  *
  * FIXME: needs doc
  */
-bool eeconfig_read_handedness(void) { return !!eeprom_read_byte(EECONFIG_HANDEDNESS); }
+bool eeconfig_read_handedness(void) {
+    return !!eeprom_read_byte(EECONFIG_HANDEDNESS);
+}
 /** \brief eeconfig update split handedness
  *
  * FIXME: needs doc
  */
-void eeconfig_update_handedness(bool val) { eeprom_update_byte(EECONFIG_HANDEDNESS, !!val); }
+void eeconfig_update_handedness(bool val) {
+    eeprom_update_byte(EECONFIG_HANDEDNESS, !!val);
+}

quantum/eeconfig.h

@@ -132,7 +132,9 @@ void eeconfig_update_handedness(bool val);
             flush_timer = timer_read();                                 \
         }                                                               \
     }                                                                   \
-    static inline void eeconfig_flag_##name(bool v) { dirty_##name |= v; } \
+    static inline void eeconfig_flag_##name(bool v) {                   \
+        dirty_##name |= v;                                              \
+    }                                                                   \
     static inline void eeconfig_write_##name(typeof(config) conf) {     \
         memcpy(&config, &conf, sizeof(config));                         \
         eeconfig_flag_##name(true);                                     \

quantum/encoder.c

@@ -59,9 +59,13 @@ static uint8_t thisHand, thatHand;
 static uint8_t encoder_value[NUMBER_OF_ENCODERS] = {0};
 #endif
 
-__attribute__((weak)) bool encoder_update_user(uint8_t index, bool clockwise) { return true; }
+__attribute__((weak)) bool encoder_update_user(uint8_t index, bool clockwise) {
+    return true;
+}
 
-__attribute__((weak)) bool encoder_update_kb(uint8_t index, bool clockwise) { return encoder_update_user(index, clockwise); }
+__attribute__((weak)) bool encoder_update_kb(uint8_t index, bool clockwise) {
+    return encoder_update_user(index, clockwise);
+}
 
 void encoder_init(void) {
 #if defined(SPLIT_KEYBOARD) && defined(ENCODERS_PAD_A_RIGHT) && defined(ENCODERS_PAD_B_RIGHT)
@@ -140,7 +144,9 @@ bool encoder_read(void) {
 #ifdef SPLIT_KEYBOARD
 void last_encoder_activity_trigger(void);
 
-void encoder_state_raw(uint8_t* slave_state) { memcpy(slave_state, &encoder_value[thisHand], sizeof(uint8_t) * NUMBER_OF_ENCODERS); }
+void encoder_state_raw(uint8_t* slave_state) {
+    memcpy(slave_state, &encoder_value[thisHand], sizeof(uint8_t) * NUMBER_OF_ENCODERS);
+}
 
 void encoder_update_raw(uint8_t* slave_state) {
     bool changed = false;

quantum/encoder/tests/mock.c

@@ -26,7 +26,9 @@ uint8_t mockSetPinInputHigh(pin_t pin) {
     return 0;
 }
 
-bool mockReadPin(pin_t pin) { return pins[pin]; }
+bool mockReadPin(pin_t pin) {
+    return pins[pin];
+}
 
 bool setPin(pin_t pin, bool val) {
     pins[pin] = val;

quantum/encoder/tests/mock_split.c

@@ -26,7 +26,9 @@ uint8_t mockSetPinInputHigh(pin_t pin) {
     return 0;
 }
 
-bool mockReadPin(pin_t pin) { return pins[pin]; }
+bool mockReadPin(pin_t pin) {
+    return pins[pin];
+}
 
 bool setPin(pin_t pin, bool val) {
     pins[pin] = val;

quantum/haptic.c

@@ -247,7 +247,9 @@ void haptic_set_dwell(uint8_t dwell) {
     xprintf("haptic_config.dwell = %u\n", haptic_config.dwell);
 }
 
-uint8_t haptic_get_enable(void) { return haptic_config.enable; }
+uint8_t haptic_get_enable(void) {
+    return haptic_config.enable;
+}
 
 uint8_t haptic_get_mode(void) {
     if (!haptic_config.enable) {

quantum/keyboard.c

@@ -110,18 +110,34 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 
 static uint32_t last_input_modification_time = 0;
-uint32_t        last_input_activity_time(void) { return last_input_modification_time; }
+uint32_t        last_input_activity_time(void) {
-uint32_t        last_input_activity_elapsed(void) { return timer_elapsed32(last_input_modification_time); }
+    return last_input_modification_time;
+}
+uint32_t last_input_activity_elapsed(void) {
+    return timer_elapsed32(last_input_modification_time);
+}
 
 static uint32_t last_matrix_modification_time = 0;
-uint32_t        last_matrix_activity_time(void) { return last_matrix_modification_time; }
+uint32_t        last_matrix_activity_time(void) {
-uint32_t        last_matrix_activity_elapsed(void) { return timer_elapsed32(last_matrix_modification_time); }
+    return last_matrix_modification_time;
-void            last_matrix_activity_trigger(void) { last_matrix_modification_time = last_input_modification_time = timer_read32(); }
+}
+uint32_t last_matrix_activity_elapsed(void) {
+    return timer_elapsed32(last_matrix_modification_time);
+}
+void last_matrix_activity_trigger(void) {
+    last_matrix_modification_time = last_input_modification_time = timer_read32();
+}
 
 static uint32_t last_encoder_modification_time = 0;
-uint32_t        last_encoder_activity_time(void) { return last_encoder_modification_time; }
+uint32_t        last_encoder_activity_time(void) {
-uint32_t        last_encoder_activity_elapsed(void) { return timer_elapsed32(last_encoder_modification_time); }
+    return last_encoder_modification_time;
-void            last_encoder_activity_trigger(void) { last_encoder_modification_time = last_input_modification_time = timer_read32(); }
+}
+uint32_t last_encoder_activity_elapsed(void) {
+    return timer_elapsed32(last_encoder_modification_time);
+}
+void last_encoder_activity_trigger(void) {
+    last_encoder_modification_time = last_input_modification_time = timer_read32();
+}
 
 // Only enable this if console is enabled to print to
 #if defined(DEBUG_MATRIX_SCAN_RATE)
@@ -143,7 +159,9 @@ void matrix_scan_perf_task(void) {
     }
 }
 
-uint32_t get_matrix_scan_rate(void) { return last_matrix_scan_count; }
+uint32_t get_matrix_scan_rate(void) {
+    return last_matrix_scan_count;
+}
 #else
 #    define matrix_scan_perf_task()
 #endif
@@ -220,7 +238,9 @@ __attribute__((weak)) void keyboard_pre_init_user(void) {}
  *
  * FIXME: needs doc
  */
-__attribute__((weak)) void keyboard_pre_init_kb(void) { keyboard_pre_init_user(); }
+__attribute__((weak)) void keyboard_pre_init_kb(void) {
+    keyboard_pre_init_user();
+}
 
 /** \brief keyboard_post_init_user
  *
@@ -234,7 +254,9 @@ __attribute__((weak)) void keyboard_post_init_user() {}
  * FIXME: needs doc
  */
 
-__attribute__((weak)) void keyboard_post_init_kb(void) { keyboard_post_init_user(); }
+__attribute__((weak)) void keyboard_post_init_kb(void) {
+    keyboard_post_init_user();
+}
 
 /** \brief keyboard_setup
  *
@@ -258,13 +280,17 @@ void keyboard_setup(void) {
  *
  * FIXME: needs doc
  */
-__attribute__((weak)) bool is_keyboard_master(void) { return true; }
+__attribute__((weak)) bool is_keyboard_master(void) {
+    return true;
+}
 
 /** \brief is_keyboard_left
  *
  * FIXME: needs doc
  */
-__attribute__((weak)) bool is_keyboard_left(void) { return true; }
+__attribute__((weak)) bool is_keyboard_left(void) {
+    return true;
+}
 
 #endif
 
@@ -273,7 +299,9 @@ __attribute__((weak)) bool is_keyboard_left(void) { return true; }
  * Override this function if you have a condition where keypresses processing should change:
  *   - splits where the slave side needs to process for rgb/oled functionality
  */
-__attribute__((weak)) bool should_process_keypress(void) { return is_keyboard_master(); }
+__attribute__((weak)) bool should_process_keypress(void) {
+    return is_keyboard_master();
+}
 
 /** \brief housekeeping_task_kb
  *

quantum/keyboard.h

@@ -44,13 +44,21 @@ typedef struct {
  * 1) (time == 0) to handle (keyevent_t){} as empty event
  * 2) Matrix(255, 255) to make TICK event available
  */
-static inline bool IS_NOEVENT(keyevent_t event) { return event.time == 0 || (event.key.row == 255 && event.key.col == 255); }
+static inline bool IS_NOEVENT(keyevent_t event) {
-static inline bool IS_PRESSED(keyevent_t event) { return (!IS_NOEVENT(event) && event.pressed); }
+    return event.time == 0 || (event.key.row == 255 && event.key.col == 255);
-static inline bool IS_RELEASED(keyevent_t event) { return (!IS_NOEVENT(event) && !event.pressed); }
+}
+static inline bool IS_PRESSED(keyevent_t event) {
+    return (!IS_NOEVENT(event) && event.pressed);
+}
+static inline bool IS_RELEASED(keyevent_t event) {
+    return (!IS_NOEVENT(event) && !event.pressed);
+}
 
 /* Tick event */
 #define TICK                                                                                    \
-    (keyevent_t) { .key = (keypos_t){.row = 255, .col = 255}, .pressed = false, .time = (timer_read() | 1) }
+    (keyevent_t) {                                                                              \
+        .key = (keypos_t){.row = 255, .col = 255}, .pressed = false, .time = (timer_read() | 1) \
+    }
 
 /* it runs once at early stage of startup before keyboard_init. */
 void keyboard_setup(void);

quantum/led.c

@@ -64,13 +64,17 @@ __attribute__((weak)) void led_set_user(uint8_t usb_led) {}
  *
  * \deprecated Use led_update_kb() instead.
  */
-__attribute__((weak)) void led_set_kb(uint8_t usb_led) { led_set_user(usb_led); }
+__attribute__((weak)) void led_set_kb(uint8_t usb_led) {
+    led_set_user(usb_led);
+}
 
 /** \brief Lock LED update callback - keymap/user level
  *
  * \return True if led_update_kb() should run its own code, false otherwise.
  */
-__attribute__((weak)) bool led_update_user(led_t led_state) { return true; }
+__attribute__((weak)) bool led_update_user(led_t led_state) {
+    return true;
+}
 
 /** \brief Lock LED update callback - keyboard level
  *
@@ -156,7 +160,9 @@ void led_suspend(void) {
 
 /** \brief Trigger behaviour on transition from suspend
  */
-void led_wakeup(void) { led_set(host_keyboard_leds()); }
+void led_wakeup(void) {
+    led_set(host_keyboard_leds());
+}
 
 /** \brief set host led state
  *

quantum/led_matrix/animations/band_anim.h

@@ -7,7 +7,9 @@ static uint8_t BAND_math(uint8_t val, uint8_t i, uint8_t time) {
     return scale8(v < 0 ? 0 : v, val);
 }
 
-bool BAND(effect_params_t* params) { return effect_runner_i(params, &BAND_math); }
+bool BAND(effect_params_t* params) {
+    return effect_runner_i(params, &BAND_math);
+}
 
 #    endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 #endif     // ENABLE_LED_MATRIX_BAND

quantum/led_matrix/animations/band_pinwheel_anim.h

@@ -2,9 +2,13 @@
 LED_MATRIX_EFFECT(BAND_PINWHEEL)
 #    ifdef LED_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static uint8_t BAND_PINWHEEL_math(uint8_t val, int16_t dx, int16_t dy, uint8_t time) { return scale8(val - time - atan2_8(dy, dx) * 3, val); }
+static uint8_t BAND_PINWHEEL_math(uint8_t val, int16_t dx, int16_t dy, uint8_t time) {
+    return scale8(val - time - atan2_8(dy, dx) * 3, val);
+}
 
-bool BAND_PINWHEEL(effect_params_t* params) { return effect_runner_dx_dy(params, &BAND_PINWHEEL_math); }
+bool BAND_PINWHEEL(effect_params_t* params) {
+    return effect_runner_dx_dy(params, &BAND_PINWHEEL_math);
+}
 
 #    endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 #endif     // ENABLE_LED_MATRIX_BAND_PINWHEEL

quantum/led_matrix/animations/band_spiral_anim.h

@@ -2,9 +2,13 @@
 LED_MATRIX_EFFECT(BAND_SPIRAL)
 #    ifdef LED_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static uint8_t BAND_SPIRAL_math(uint8_t val, int16_t dx, int16_t dy, uint8_t dist, uint8_t time) { return scale8(val + dist - time - atan2_8(dy, dx), val); }
+static uint8_t BAND_SPIRAL_math(uint8_t val, int16_t dx, int16_t dy, uint8_t dist, uint8_t time) {
+    return scale8(val + dist - time - atan2_8(dy, dx), val);
+}
 
-bool BAND_SPIRAL(effect_params_t* params) { return effect_runner_dx_dy_dist(params, &BAND_SPIRAL_math); }
+bool BAND_SPIRAL(effect_params_t* params) {
+    return effect_runner_dx_dy_dist(params, &BAND_SPIRAL_math);
+}
 
 #    endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 #endif     // ENABLE_LED_MATRIX_BAND_SPIRAL

quantum/led_matrix/animations/cycle_left_right_anim.h

@@ -2,9 +2,13 @@
 LED_MATRIX_EFFECT(CYCLE_LEFT_RIGHT)
 #    ifdef LED_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static uint8_t CYCLE_LEFT_RIGHT_math(uint8_t val, uint8_t i, uint8_t time) { return scale8(g_led_config.point[i].x - time, val); }
+static uint8_t CYCLE_LEFT_RIGHT_math(uint8_t val, uint8_t i, uint8_t time) {
+    return scale8(g_led_config.point[i].x - time, val);
+}
 
-bool CYCLE_LEFT_RIGHT(effect_params_t* params) { return effect_runner_i(params, &CYCLE_LEFT_RIGHT_math); }
+bool CYCLE_LEFT_RIGHT(effect_params_t* params) {
+    return effect_runner_i(params, &CYCLE_LEFT_RIGHT_math);
+}
 
 #    endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 #endif     // ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT

quantum/led_matrix/animations/cycle_out_in_anim.h

@@ -2,9 +2,13 @@
 LED_MATRIX_EFFECT(CYCLE_OUT_IN)
 #    ifdef LED_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static uint8_t CYCLE_OUT_IN_math(uint8_t val, int16_t dx, int16_t dy, uint8_t dist, uint8_t time) { return scale8(3 * dist / 2 + time, val); }
+static uint8_t CYCLE_OUT_IN_math(uint8_t val, int16_t dx, int16_t dy, uint8_t dist, uint8_t time) {
+    return scale8(3 * dist / 2 + time, val);
+}
 
-bool CYCLE_OUT_IN(effect_params_t* params) { return effect_runner_dx_dy_dist(params, &CYCLE_OUT_IN_math); }
+bool CYCLE_OUT_IN(effect_params_t* params) {
+    return effect_runner_dx_dy_dist(params, &CYCLE_OUT_IN_math);
+}
 
 #    endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 #endif     // ENABLE_LED_MATRIX_CYCLE_OUT_IN

quantum/led_matrix/animations/cycle_up_down_anim.h

@@ -2,9 +2,13 @@
 LED_MATRIX_EFFECT(CYCLE_UP_DOWN)
 #    ifdef LED_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static uint8_t CYCLE_UP_DOWN_math(uint8_t val, uint8_t i, uint8_t time) { return scale8(g_led_config.point[i].y - time, val); }
+static uint8_t CYCLE_UP_DOWN_math(uint8_t val, uint8_t i, uint8_t time) {
+    return scale8(g_led_config.point[i].y - time, val);
+}
 
-bool CYCLE_UP_DOWN(effect_params_t* params) { return effect_runner_i(params, &CYCLE_UP_DOWN_math); }
+bool CYCLE_UP_DOWN(effect_params_t* params) {
+    return effect_runner_i(params, &CYCLE_UP_DOWN_math);
+}
 
 #    endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 #endif     // ENABLE_LED_MATRIX_CYCLE_UP_DOWN

quantum/led_matrix/animations/dual_beacon_anim.h

@@ -2,9 +2,13 @@
 LED_MATRIX_EFFECT(DUAL_BEACON)
 #    ifdef LED_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static uint8_t DUAL_BEACON_math(uint8_t val, int8_t sin, int8_t cos, uint8_t i, uint8_t time) { return scale8(((g_led_config.point[i].y - k_led_matrix_center.y) * cos + (g_led_config.point[i].x - k_led_matrix_center.x) * sin) / 128, val); }
+static uint8_t DUAL_BEACON_math(uint8_t val, int8_t sin, int8_t cos, uint8_t i, uint8_t time) {
+    return scale8(((g_led_config.point[i].y - k_led_matrix_center.y) * cos + (g_led_config.point[i].x - k_led_matrix_center.x) * sin) / 128, val);
+}
 
-bool DUAL_BEACON(effect_params_t* params) { return effect_runner_sin_cos_i(params, &DUAL_BEACON_math); }
+bool DUAL_BEACON(effect_params_t* params) {
+    return effect_runner_sin_cos_i(params, &DUAL_BEACON_math);
+}
 
 #    endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 #endif     // ENABLE_LED_MATRIX_DUAL_BEACON

quantum/led_matrix/animations/solid_reactive_cross.h

@@ -23,11 +23,15 @@ static uint8_t SOLID_REACTIVE_CROSS_math(uint8_t val, int16_t dx, int16_t dy, ui
 }
 
 #            ifdef ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS
-bool SOLID_REACTIVE_CROSS(effect_params_t* params) { return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_REACTIVE_CROSS_math); }
+bool SOLID_REACTIVE_CROSS(effect_params_t* params) {
+    return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_REACTIVE_CROSS_math);
+}
 #            endif
 
 #            ifdef ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS
-bool SOLID_REACTIVE_MULTICROSS(effect_params_t* params) { return effect_runner_reactive_splash(0, params, &SOLID_REACTIVE_CROSS_math); }
+bool SOLID_REACTIVE_MULTICROSS(effect_params_t* params) {
+    return effect_runner_reactive_splash(0, params, &SOLID_REACTIVE_CROSS_math);
+}
 #            endif
 
 #        endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS

quantum/led_matrix/animations/solid_reactive_nexus.h

@@ -20,11 +20,15 @@ static uint8_t SOLID_REACTIVE_NEXUS_math(uint8_t val, int16_t dx, int16_t dy, ui
 }
 
 #            ifdef ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS
-bool SOLID_REACTIVE_NEXUS(effect_params_t* params) { return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_REACTIVE_NEXUS_math); }
+bool SOLID_REACTIVE_NEXUS(effect_params_t* params) {
+    return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_REACTIVE_NEXUS_math);
+}
 #            endif
 
 #            ifdef ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS
-bool SOLID_REACTIVE_MULTINEXUS(effect_params_t* params) { return effect_runner_reactive_splash(0, params, &SOLID_REACTIVE_NEXUS_math); }
+bool SOLID_REACTIVE_MULTINEXUS(effect_params_t* params) {
+    return effect_runner_reactive_splash(0, params, &SOLID_REACTIVE_NEXUS_math);
+}
 #            endif
 
 #        endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS

quantum/led_matrix/animations/solid_reactive_simple_anim.h

@@ -3,9 +3,13 @@
 LED_MATRIX_EFFECT(SOLID_REACTIVE_SIMPLE)
 #        ifdef LED_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static uint8_t SOLID_REACTIVE_SIMPLE_math(uint8_t val, uint16_t offset) { return scale8(255 - offset, val); }
+static uint8_t SOLID_REACTIVE_SIMPLE_math(uint8_t val, uint16_t offset) {
+    return scale8(255 - offset, val);
+}
 
-bool SOLID_REACTIVE_SIMPLE(effect_params_t* params) { return effect_runner_reactive(params, &SOLID_REACTIVE_SIMPLE_math); }
+bool SOLID_REACTIVE_SIMPLE(effect_params_t* params) {
+    return effect_runner_reactive(params, &SOLID_REACTIVE_SIMPLE_math);
+}
 
 #        endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 #    endif     // ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE

quantum/led_matrix/animations/solid_reactive_wide.h

@@ -18,11 +18,15 @@ static uint8_t SOLID_REACTIVE_WIDE_math(uint8_t val, int16_t dx, int16_t dy, uin
 }
 
 #            ifdef ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE
-bool SOLID_REACTIVE_WIDE(effect_params_t* params) { return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_REACTIVE_WIDE_math); }
+bool SOLID_REACTIVE_WIDE(effect_params_t* params) {
+    return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_REACTIVE_WIDE_math);
+}
 #            endif
 
 #            ifdef ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE
-bool SOLID_REACTIVE_MULTIWIDE(effect_params_t* params) { return effect_runner_reactive_splash(0, params, &SOLID_REACTIVE_WIDE_math); }
+bool SOLID_REACTIVE_MULTIWIDE(effect_params_t* params) {
+    return effect_runner_reactive_splash(0, params, &SOLID_REACTIVE_WIDE_math);
+}
 #            endif
 
 #        endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS

quantum/led_matrix/animations/solid_splash_anim.h

@@ -18,11 +18,15 @@ uint8_t SOLID_SPLASH_math(uint8_t val, int16_t dx, int16_t dy, uint8_t dist, uin
 }
 
 #            ifdef ENABLE_LED_MATRIX_SOLID_SPLASH
-bool SOLID_SPLASH(effect_params_t* params) { return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_SPLASH_math); }
+bool SOLID_SPLASH(effect_params_t* params) {
+    return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_SPLASH_math);
+}
 #            endif
 
 #            ifdef ENABLE_LED_MATRIX_SOLID_MULTISPLASH
-bool SOLID_MULTISPLASH(effect_params_t* params) { return effect_runner_reactive_splash(0, params, &SOLID_SPLASH_math); }
+bool SOLID_MULTISPLASH(effect_params_t* params) {
+    return effect_runner_reactive_splash(0, params, &SOLID_SPLASH_math);
+}
 #            endif
 
 #        endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS

quantum/led_matrix/animations/wave_left_right_anim.h

@@ -2,9 +2,13 @@
 LED_MATRIX_EFFECT(WAVE_LEFT_RIGHT)
 #    ifdef LED_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static uint8_t WAVE_LEFT_RIGHT_math(uint8_t val, uint8_t i, uint8_t time) { return scale8(sin8(g_led_config.point[i].x - time), val); }
+static uint8_t WAVE_LEFT_RIGHT_math(uint8_t val, uint8_t i, uint8_t time) {
+    return scale8(sin8(g_led_config.point[i].x - time), val);
+}
 
-bool WAVE_LEFT_RIGHT(effect_params_t* params) { return effect_runner_i(params, &WAVE_LEFT_RIGHT_math); }
+bool WAVE_LEFT_RIGHT(effect_params_t* params) {
+    return effect_runner_i(params, &WAVE_LEFT_RIGHT_math);
+}
 
 #    endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 #endif     // ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT

quantum/led_matrix/animations/wave_up_down_anim.h

@@ -2,9 +2,13 @@
 LED_MATRIX_EFFECT(WAVE_UP_DOWN)
 #    ifdef LED_MATRIX_CUSTOM_EFFECT_IMPLS
 
-static uint8_t WAVE_UP_DOWN_math(uint8_t val, uint8_t i, uint8_t time) { return scale8(sin8(g_led_config.point[i].y - time), val); }
+static uint8_t WAVE_UP_DOWN_math(uint8_t val, uint8_t i, uint8_t time) {
+    return scale8(sin8(g_led_config.point[i].y - time), val);
+}
 
-bool WAVE_UP_DOWN(effect_params_t* params) { return effect_runner_i(params, &WAVE_UP_DOWN_math); }
+bool WAVE_UP_DOWN(effect_params_t* params) {
+    return effect_runner_i(params, &WAVE_UP_DOWN_math);
+}
 
 #    endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS
 #endif     // ENABLE_LED_MATRIX_WAVE_UP_DOWN

quantum/led_matrix/led_matrix.c

@@ -120,7 +120,9 @@ const uint8_t k_led_matrix_split[2] = LED_MATRIX_SPLIT;
 
 EECONFIG_DEBOUNCE_HELPER(led_matrix, EECONFIG_LED_MATRIX, led_matrix_eeconfig);
 
-void eeconfig_update_led_matrix(void) { eeconfig_flush_led_matrix(true); }
+void eeconfig_update_led_matrix(void) {
+    eeconfig_flush_led_matrix(true);
+}
 
 void eeconfig_update_led_matrix_default(void) {
     dprintf("eeconfig_update_led_matrix_default\n");
@@ -141,7 +143,9 @@ void eeconfig_debug_led_matrix(void) {
     dprintf("led_matrix_eeconfig.flags = %d\n", led_matrix_eeconfig.flags);
 }
 
-__attribute__((weak)) uint8_t led_matrix_map_row_column_to_led_kb(uint8_t row, uint8_t column, uint8_t *led_i) { return 0; }
+__attribute__((weak)) uint8_t led_matrix_map_row_column_to_led_kb(uint8_t row, uint8_t column, uint8_t *led_i) {
+    return 0;
+}
 
 uint8_t led_matrix_map_row_column_to_led(uint8_t row, uint8_t column, uint8_t *led_i) {
     uint8_t led_count = led_matrix_map_row_column_to_led_kb(row, column, led_i);
@@ -153,7 +157,9 @@ uint8_t led_matrix_map_row_column_to_led(uint8_t row, uint8_t column, uint8_t *l
     return led_count;
 }
 
-void led_matrix_update_pwm_buffers(void) { led_matrix_driver.flush(); }
+void led_matrix_update_pwm_buffers(void) {
+    led_matrix_driver.flush();
+}
 
 void led_matrix_set_value(int index, uint8_t value) {
 #ifdef USE_CIE1931_CURVE
@@ -164,7 +170,8 @@ void led_matrix_set_value(int index, uint8_t value) {
 
 void led_matrix_set_value_all(uint8_t value) {
 #if defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT)
-    for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) led_matrix_set_value(i, value);
+    for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++)
+        led_matrix_set_value(i, value);
 #else
 #    ifdef USE_CIE1931_CURVE
     led_matrix_driver.set_value_all(pgm_read_byte(&CIE1931_CURVE[value]));
@@ -447,7 +454,9 @@ void led_matrix_set_suspend_state(bool state) {
 #endif
 }
 
-bool led_matrix_get_suspend_state(void) { return suspend_state; }
+bool led_matrix_get_suspend_state(void) {
+    return suspend_state;
+}
 
 void led_matrix_toggle_eeprom_helper(bool write_to_eeprom) {
     led_matrix_eeconfig.enable ^= 1;
@@ -455,8 +464,12 @@ void led_matrix_toggle_eeprom_helper(bool write_to_eeprom) {
     eeconfig_flag_led_matrix(write_to_eeprom);
     dprintf("led matrix toggle [%s]: led_matrix_eeconfig.enable = %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", led_matrix_eeconfig.enable);
 }
-void led_matrix_toggle_noeeprom(void) { led_matrix_toggle_eeprom_helper(false); }
+void led_matrix_toggle_noeeprom(void) {
-void led_matrix_toggle(void) { led_matrix_toggle_eeprom_helper(true); }
+    led_matrix_toggle_eeprom_helper(false);
+}
+void led_matrix_toggle(void) {
+    led_matrix_toggle_eeprom_helper(true);
+}
 
 void led_matrix_enable(void) {
     led_matrix_enable_noeeprom();
@@ -478,7 +491,9 @@ void led_matrix_disable_noeeprom(void) {
     led_matrix_eeconfig.enable = 0;
 }
 
-uint8_t led_matrix_is_enabled(void) { return led_matrix_eeconfig.enable; }
+uint8_t led_matrix_is_enabled(void) {
+    return led_matrix_eeconfig.enable;
+}
 
 void led_matrix_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) {
     if (!led_matrix_eeconfig.enable) {
@@ -495,24 +510,38 @@ void led_matrix_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) {
     eeconfig_flag_led_matrix(write_to_eeprom);
     dprintf("led matrix mode [%s]: %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", led_matrix_eeconfig.mode);
 }
-void led_matrix_mode_noeeprom(uint8_t mode) { led_matrix_mode_eeprom_helper(mode, false); }
+void led_matrix_mode_noeeprom(uint8_t mode) {
-void led_matrix_mode(uint8_t mode) { led_matrix_mode_eeprom_helper(mode, true); }
+    led_matrix_mode_eeprom_helper(mode, false);
+}
+void led_matrix_mode(uint8_t mode) {
+    led_matrix_mode_eeprom_helper(mode, true);
+}
 
-uint8_t led_matrix_get_mode(void) { return led_matrix_eeconfig.mode; }
+uint8_t led_matrix_get_mode(void) {
+    return led_matrix_eeconfig.mode;
+}
 
 void led_matrix_step_helper(bool write_to_eeprom) {
     uint8_t mode = led_matrix_eeconfig.mode + 1;
     led_matrix_mode_eeprom_helper((mode < LED_MATRIX_EFFECT_MAX) ? mode : 1, write_to_eeprom);
 }
-void led_matrix_step_noeeprom(void) { led_matrix_step_helper(false); }
+void led_matrix_step_noeeprom(void) {
-void led_matrix_step(void) { led_matrix_step_helper(true); }
+    led_matrix_step_helper(false);
+}
+void led_matrix_step(void) {
+    led_matrix_step_helper(true);
+}
 
 void led_matrix_step_reverse_helper(bool write_to_eeprom) {
     uint8_t mode = led_matrix_eeconfig.mode - 1;
     led_matrix_mode_eeprom_helper((mode < 1) ? LED_MATRIX_EFFECT_MAX - 1 : mode, write_to_eeprom);
 }
-void led_matrix_step_reverse_noeeprom(void) { led_matrix_step_reverse_helper(false); }
+void led_matrix_step_reverse_noeeprom(void) {
-void led_matrix_step_reverse(void) { led_matrix_step_reverse_helper(true); }
+    led_matrix_step_reverse_helper(false);
+}
+void led_matrix_step_reverse(void) {
+    led_matrix_step_reverse_helper(true);
+}
 
 void led_matrix_set_val_eeprom_helper(uint8_t val, bool write_to_eeprom) {
     if (!led_matrix_eeconfig.enable) {
@@ -522,37 +551,77 @@ void led_matrix_set_val_eeprom_helper(uint8_t val, bool write_to_eeprom) {
     eeconfig_flag_led_matrix(write_to_eeprom);
     dprintf("led matrix set val [%s]: %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", led_matrix_eeconfig.val);
 }
-void led_matrix_set_val_noeeprom(uint8_t val) { led_matrix_set_val_eeprom_helper(val, false); }
+void led_matrix_set_val_noeeprom(uint8_t val) {
-void led_matrix_set_val(uint8_t val) { led_matrix_set_val_eeprom_helper(val, true); }
+    led_matrix_set_val_eeprom_helper(val, false);
+}
+void led_matrix_set_val(uint8_t val) {
+    led_matrix_set_val_eeprom_helper(val, true);
+}
 
-uint8_t led_matrix_get_val(void) { return led_matrix_eeconfig.val; }
+uint8_t led_matrix_get_val(void) {
+    return led_matrix_eeconfig.val;
+}
 
-void led_matrix_increase_val_helper(bool write_to_eeprom) { led_matrix_set_val_eeprom_helper(qadd8(led_matrix_eeconfig.val, LED_MATRIX_VAL_STEP), write_to_eeprom); }
+void led_matrix_increase_val_helper(bool write_to_eeprom) {
-void led_matrix_increase_val_noeeprom(void) { led_matrix_increase_val_helper(false); }
+    led_matrix_set_val_eeprom_helper(qadd8(led_matrix_eeconfig.val, LED_MATRIX_VAL_STEP), write_to_eeprom);
-void led_matrix_increase_val(void) { led_matrix_increase_val_helper(true); }
+}
+void led_matrix_increase_val_noeeprom(void) {
+    led_matrix_increase_val_helper(false);
+}
+void led_matrix_increase_val(void) {
+    led_matrix_increase_val_helper(true);
+}
 
-void led_matrix_decrease_val_helper(bool write_to_eeprom) { led_matrix_set_val_eeprom_helper(qsub8(led_matrix_eeconfig.val, LED_MATRIX_VAL_STEP), write_to_eeprom); }
+void led_matrix_decrease_val_helper(bool write_to_eeprom) {
-void led_matrix_decrease_val_noeeprom(void) { led_matrix_decrease_val_helper(false); }
+    led_matrix_set_val_eeprom_helper(qsub8(led_matrix_eeconfig.val, LED_MATRIX_VAL_STEP), write_to_eeprom);
-void led_matrix_decrease_val(void) { led_matrix_decrease_val_helper(true); }
+}
+void led_matrix_decrease_val_noeeprom(void) {
+    led_matrix_decrease_val_helper(false);
+}
+void led_matrix_decrease_val(void) {
+    led_matrix_decrease_val_helper(true);
+}
 
 void led_matrix_set_speed_eeprom_helper(uint8_t speed, bool write_to_eeprom) {
     led_matrix_eeconfig.speed = speed;
     eeconfig_flag_led_matrix(write_to_eeprom);
     dprintf("led matrix set speed [%s]: %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", led_matrix_eeconfig.speed);
 }
-void led_matrix_set_speed_noeeprom(uint8_t speed) { led_matrix_set_speed_eeprom_helper(speed, false); }
+void led_matrix_set_speed_noeeprom(uint8_t speed) {
-void led_matrix_set_speed(uint8_t speed) { led_matrix_set_speed_eeprom_helper(speed, true); }
+    led_matrix_set_speed_eeprom_helper(speed, false);
+}
+void led_matrix_set_speed(uint8_t speed) {
+    led_matrix_set_speed_eeprom_helper(speed, true);
+}
 
-uint8_t led_matrix_get_speed(void) { return led_matrix_eeconfig.speed; }
+uint8_t led_matrix_get_speed(void) {
+    return led_matrix_eeconfig.speed;
+}
 
-void led_matrix_increase_speed_helper(bool write_to_eeprom) { led_matrix_set_speed_eeprom_helper(qadd8(led_matrix_eeconfig.speed, LED_MATRIX_SPD_STEP), write_to_eeprom); }
+void led_matrix_increase_speed_helper(bool write_to_eeprom) {
-void led_matrix_increase_speed_noeeprom(void) { led_matrix_increase_speed_helper(false); }
+    led_matrix_set_speed_eeprom_helper(qadd8(led_matrix_eeconfig.speed, LED_MATRIX_SPD_STEP), write_to_eeprom);
-void led_matrix_increase_speed(void) { led_matrix_increase_speed_helper(true); }
+}
+void led_matrix_increase_speed_noeeprom(void) {
+    led_matrix_increase_speed_helper(false);
+}
+void led_matrix_increase_speed(void) {
+    led_matrix_increase_speed_helper(true);
+}
 
-void led_matrix_decrease_speed_helper(bool write_to_eeprom) { led_matrix_set_speed_eeprom_helper(qsub8(led_matrix_eeconfig.speed, LED_MATRIX_SPD_STEP), write_to_eeprom); }
+void led_matrix_decrease_speed_helper(bool write_to_eeprom) {
-void led_matrix_decrease_speed_noeeprom(void) { led_matrix_decrease_speed_helper(false); }
+    led_matrix_set_speed_eeprom_helper(qsub8(led_matrix_eeconfig.speed, LED_MATRIX_SPD_STEP), write_to_eeprom);
-void led_matrix_decrease_speed(void) { led_matrix_decrease_speed_helper(true); }
+}
+void led_matrix_decrease_speed_noeeprom(void) {
+    led_matrix_decrease_speed_helper(false);
+}
+void led_matrix_decrease_speed(void) {
+    led_matrix_decrease_speed_helper(true);
+}
 
-led_flags_t led_matrix_get_flags(void) { return led_matrix_eeconfig.flags; }
+led_flags_t led_matrix_get_flags(void) {
+    return led_matrix_eeconfig.flags;
+}
 
-void led_matrix_set_flags(led_flags_t flags) { led_matrix_eeconfig.flags = flags; }
+void led_matrix_set_flags(led_flags_t flags) {
+    led_matrix_eeconfig.flags = flags;
+}