Merge pull request #1085 from priyadi/promethium

Promethium keyboard layout update

keyboards/handwired/promethium/config.h

@@ -43,38 +43,107 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { D7, C6, D0, D1, F5, F4, F1, F0 }
 #define UNUSED_PINS
 
-/* COL2ROW or ROW2COL */
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
 #define DIODE_DIRECTION COL2ROW
 
-/* define if matrix has ghost */
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
 /* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
+// #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
+// #define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
 
 /* key combination for command */
 #define IS_COMMAND() ( \
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RCTRL)) \
 )
 
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
  */
 
 /* disable debug print */
-//#define NO_DEBUG
+// #define NO_DEBUG
 
 /* disable print */
-//#define NO_PRINT
+// #define NO_PRINT
 
 /* disable action features */
 //#define NO_ACTION_LAYER

keyboards/handwired/promethium/keymaps/priyadi/config.h

@@ -14,4 +14,11 @@
 #define RGB_DI_PIN B5
 #define RGBSPS_NUM 57
 
+#define LAYOUT_DVORAK
+#define LAYOUT_COLEMAK
+#define LAYOUT_NORMAN
+#define LAYOUT_WORKMAN
+
+#define DOUBLESPACE_LAYER_ENABLE
+
 #endif

keyboards/handwired/promethium/promethium.c

@@ -1,6 +1,38 @@
 #include "promethium.h"
+#include "analog.h"
+#include "timer.h"
+#include "matrix.h"
+
+// cubic fit {3.3, 0}, {3.5, 2.9}, {3.6, 5}, {3.7, 8.6}, {3.8, 36},  {3.9, 62}, {4.0, 73}, {4.05, 83}, {4.1, 89}, {4.15, 94}, {4.2, 100}
+
+uint8_t battery_level(void) {
+    float voltage = analogRead(BATTERY_PIN) * 2 * 3.3 / 1024;
+    if (voltage < MIN_VOLTAGE) return 0;
+    if (voltage > MAX_VOLTAGE) return 255;
+    return (voltage - MIN_VOLTAGE) / (MAX_VOLTAGE - MIN_VOLTAGE) * 255;
+}
+
+__attribute__ ((weak))
+void battery_poll(uint8_t level) {
+}
 
 void matrix_init_kb(void) {
-
 	matrix_init_user();
-}
+}
+
+void matrix_scan_kb(void) {
+    static uint16_t counter = BATTERY_POLL;
+    counter++;
+
+    if (counter > BATTERY_POLL) {
+        counter = 0;
+        battery_poll(battery_level());
+    }
+
+    matrix_scan_user();
+}
+
+void led_set_kb(uint8_t usb_led) {
+    led_set_user(usb_led);
+}
+

keyboards/handwired/promethium/promethium.h

@@ -4,6 +4,11 @@
 #include "quantum.h"
 
 #define PS2_INIT_DELAY 2000
+#define UNICODE_TYPE_DELAY 0
+#define BATTERY_PIN 9
+#define BATTERY_POLL 30000
+#define MAX_VOLTAGE 4.2
+#define MIN_VOLTAGE 3.2
 
 #define KEYMAP( \
     k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
@@ -22,6 +27,8 @@
     {k47, k48, k49, k4a, k4b, k4c} \
 }
 
+
+
 enum led_sequence {
   LED_IND_BLUETOOTH,
   LED_IND_USB,
@@ -98,4 +105,4 @@ enum led_sequence {
 
 #endif
 
-
+void battery_poll(uint8_t level);

keyboards/handwired/promethium/rgbsps.c

@@ -21,4 +21,53 @@ void rgbsps_turnoff(void) {
 
 void rgbsps_send(void) {
   ws2812_setleds(led, RGBSPS_NUM);
-}
+}
+
+void rgbsps_sethsv(uint8_t index, uint16_t hue, uint8_t sat, uint8_t val) {
+  uint8_t r = 0, g = 0, b = 0, base, color;
+
+  if (sat == 0) { // Acromatic color (gray). Hue doesn't mind.
+    r = val;
+    g = val;
+    b = val;
+  } else {
+    base = ((255 - sat) * val) >> 8;
+    color = (val - base) * (hue % 60) / 60;
+
+    switch (hue / 60) {
+      case 0:
+        r = val;
+        g = base + color;
+        b = base;
+        break;
+      case 1:
+        r = val - color;
+        g = val;
+        b = base;
+        break;
+      case 2:
+        r = base;
+        g = val;
+        b = base + color;
+        break;
+      case 3:
+        r = base;
+        g = val - color;
+        b = val;
+        break;
+      case 4:
+        r = base + color;
+        g = base;
+        b = val;
+        break;
+      case 5:
+        r = val;
+        g = base;
+        b = val - color;
+        break;
+    }
+  }
+
+  rgbsps_set(index, r, g, b);
+}
+

keyboards/handwired/promethium/rgbsps.h

@@ -1,4 +1,5 @@
 void rgbsps_set(uint8_t index, uint8_t r, uint8_t g, uint8_t b);
 void rgbsps_setall(uint8_t r, uint8_t g, uint8_t b);
 void rgbsps_turnoff(void);
-void rgbsps_send(void);
+void rgbsps_send(void);
+void rgbsps_sethsv(uint8_t index, uint16_t hue, uint8_t sat, uint8_t val);

keyboards/handwired/promethium/rules.mk

@@ -72,4 +72,5 @@ API_SYSEX_ENABLE ?= no
 SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
 
 SRC += $(QUANTUM_DIR)/light_ws2812.c
-SRC += rgbsps.c
+SRC += rgbsps.c
+SRC += $(QUANTUM_DIR)/analog.c