[Keyboard] handwired dactyl with 2 pro micros added (#5113)
* handwired dactyl with 2 pro micros added * dactyl_promicro README updated * dactyl_promicro default layout fixed * requested changes * dactyl_promicro README updated * qmk toolbox link fixed * layout reflects phys. keys positions
This commit is contained in:
zwnk
Drashna Jaelre
parent
0e68b6c1a9
commit
7639edb0ae
|
|
@ -131,17 +131,9 @@ file will run on both hands instead of having to flash left and right handed
|
|||
versions of the firmware to each half. To flash the EEPROM file for the left
|
||||
half run:
|
||||
```
|
||||
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-lefthand.eep"
|
||||
// or the equivalent in dfu-programmer
|
||||
|
||||
make handwired/dactyl_promicro:default:dfu-split-left
|
||||
make handwired/dactyl_promicro:default:dfu-split-right
|
||||
```
|
||||
and similarly for right half
|
||||
```
|
||||
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-righthand.eep"
|
||||
// or the equivalent in dfu-programmer
|
||||
```
|
||||
|
||||
NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
|
||||
|
||||
After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
|
||||
|
||||
|
|
@ -162,6 +154,6 @@ Also, if the slave board is producing weird characters in certain columns,
|
|||
update the following line in `matrix.c` to the following:
|
||||
|
||||
```
|
||||
// _delay_us(30); // without this wait read unstable value.
|
||||
_delay_us(300); // without this wait read unstable value.
|
||||
// wait_us(30); // without this wait read unstable value.
|
||||
wait_us(300); // without this wait read unstable value.
|
||||
```
|
||||
|
|
|
|||
|
|
@ -0,0 +1,83 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
Copyright 2015 Jack Humbert
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
#define PRODUCT Dactyl Ergo(6x6)
|
||||
|
||||
/* key matrix size */
|
||||
// Rows are doubled-up
|
||||
#define MATRIX_ROWS 12
|
||||
#define MATRIX_COLS 6
|
||||
|
||||
// wiring of each half
|
||||
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
|
||||
#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2, B6 }
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x3060
|
||||
#define DEVICE_VER 0x0001
|
||||
//#define MANUFACTURER tshort
|
||||
// defined in subfolder
|
||||
#define DESCRIPTION A split keyboard
|
||||
|
||||
/* mouse config */
|
||||
#define MOUSEKEY_INTERVAL 20
|
||||
#define MOUSEKEY_DELAY 0
|
||||
#define MOUSEKEY_TIME_TO_MAX 60
|
||||
#define MOUSEKEY_MAX_SPEED 7
|
||||
#define MOUSEKEY_WHEEL_DELAY 0
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* serial.c configuration for split keyboard */
|
||||
#define SOFT_SERIAL_PIN D0
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* Enables This makes it easier for fast typists to use dual-function keys */
|
||||
#define PERMISSIVE_HOLD
|
||||
|
||||
/* ws2812 RGB LED */
|
||||
#define RGB_DI_PIN D3
|
||||
|
||||
#define RGBLED_NUM 12 // Number of LEDs
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
// #define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
// #define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
#include "dactyl_promicro.h"
|
||||
|
||||
#ifdef SSD1306OLED
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
#endif
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
};
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
|
||||
#ifdef USE_I2C
|
||||
#include <stddef.h>
|
||||
#ifdef __AVR__
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
#define LAYOUT_6x6(\
|
||||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
|
||||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
|
||||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
|
||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
|
||||
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45, \
|
||||
L55, L51, L52, R53, R54, R50, \
|
||||
L53, R52, \
|
||||
L54, R51 \
|
||||
)\
|
||||
{ \
|
||||
{ L00, L01, L02, L03, L04, L05 }, \
|
||||
{ L10, L11, L12, L13, L14, L15 }, \
|
||||
{ L20, L21, L22, L23, L24, L25 }, \
|
||||
{ L30, L31, L32, L33, L34, L35 }, \
|
||||
{ L40, L41, L42, L43, L44, L45 }, \
|
||||
{ KC_NO, L51, L52, L53, L54, L55 }, \
|
||||
\
|
||||
{ R00, R01, R02, R03, R04, R05 }, \
|
||||
{ R10, R11, R12, R13, R14, R15 }, \
|
||||
{ R20, R21, R22, R23, R24, R25 }, \
|
||||
{ R30, R31, R32, R33, R34, R35 }, \
|
||||
{ R40, R41, R42, R43, R44, R45 }, \
|
||||
{ R50, R51, R52, R53, R54, KC_NO }, \
|
||||
}
|
||||
|
|
@ -0,0 +1,25 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define USE_SERIAL
|
||||
|
||||
#define MASTER_RIGHT
|
||||
// #define MASTER_RIGHT
|
||||
//#define EE_HANDS
|
||||
// Rows are doubled-up
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
|
||||
/* A QWERTY 3 Layer layout for the Dactyl Manuform 6x6 Keyboard */
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _RAISE 2
|
||||
|
||||
#define RAISE MO(_RAISE)
|
||||
#define LOWER MO(_LOWER)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
|
||||
[_QWERTY] = LAYOUT_6x6(
|
||||
KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC,
|
||||
KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS,
|
||||
KC_LSFT , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT,
|
||||
KC_LCTL , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM , KC_DOT ,KC_SLSH,KC_BSLASH,
|
||||
KC_PLUS , KC_LEFT,KC_UP ,KC_DOWN, KC_RGHT, RAISE , LOWER , KC_HOME, KC_PGUP, KC_PGDN,KC_END ,KC_EQL,
|
||||
_______,KC_LALT,KC_PSCR, KC_LGUI, KC_SPC, KC_ENT,KC_GRAVE, KC_AT ,KC_PSCR ,_______
|
||||
|
||||
),
|
||||
|
||||
|
||||
[_LOWER] = LAYOUT_6x6(
|
||||
KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL,
|
||||
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS,
|
||||
_______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE,
|
||||
_______,_______,_______,_______,_______,KC_PSCR, KC_P0 , KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS,
|
||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
|
||||
_______,_______,_______,_______,_______, _______,_______,_______,_______,_______
|
||||
),
|
||||
|
||||
[_RAISE] = LAYOUT_6x6(
|
||||
KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,
|
||||
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE,
|
||||
_______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU,
|
||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD,
|
||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
|
||||
_______,_______,_______,_______,_______, _______,_______,_______,_______,_______
|
||||
),
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1,25 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#define USE_SERIAL
|
||||
|
||||
#define MASTER_RIGHT
|
||||
// #define MASTER_RIGHT
|
||||
//#define EE_HANDS
|
||||
// Rows are doubled-up
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
|
||||
/* A QWERTY 3 Layer layout for the Dactyl Manuform 6x6 Keyboard */
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _RAISE 2
|
||||
|
||||
#define RAISE MO(_RAISE)
|
||||
#define LOWER MO(_LOWER)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
|
||||
[_QWERTY] = LAYOUT_6x6(
|
||||
KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC,
|
||||
KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS,
|
||||
KC_LSFT , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT,
|
||||
KC_LCTL , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM , KC_DOT ,KC_SLSH,KC_BSLASH,
|
||||
KC_PLUS , KC_LEFT,KC_UP ,KC_DOWN, KC_RGHT, RAISE , LOWER , KC_HOME, KC_PGUP, KC_PGDN,KC_END ,KC_EQL,
|
||||
_______,KC_LALT,KC_PSCR, KC_LGUI, KC_SPC, KC_ENT,KC_GRAVE, KC_AT ,KC_PSCR ,_______
|
||||
|
||||
),
|
||||
|
||||
|
||||
[_LOWER] = LAYOUT_6x6(
|
||||
KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL,
|
||||
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS,
|
||||
_______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE,
|
||||
_______,_______,_______,_______,_______,KC_PSCR, KC_P0 , KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS,
|
||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
|
||||
_______,_______,_______,_______,_______, _______,_______,_______,_______,_______
|
||||
),
|
||||
|
||||
[_RAISE] = LAYOUT_6x6(
|
||||
KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,
|
||||
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE,
|
||||
_______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU,
|
||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD,
|
||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
|
||||
_______,_______,_______,_______,_______, _______,_______,_______,_______,_______
|
||||
),
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1,93 @@
|
|||
# Dactyl with Arduino Pro Micro
|
||||
|
||||
See https://github.com/adereth/dactyl-keyboard for the original Version.
|
||||
|
||||
This Dactyl uses the Arduino Pro Mirco (2x).
|
||||
Wiring is a 6x6 Matrix like the [Dactyl Manuform](https://github.com/qmk/qmk_firmware/tree/master/keyboards/handwired/dactyl_manuform)
|
||||
|
||||
|
||||
## Build the Firmware:
|
||||
|
||||
- Build the firmware with `make handwired/dactyl_promicro:<keymapname>`, for example `make handwired/dactyl:default`
|
||||
- This will result in a hex file called `handwired_dactyl_promicro_<keymapname>.hex`, e.g.
|
||||
`handwired_dactyl_promicro_default.hex`
|
||||
|
||||
How to setup your build enviroment can be found here: [Installing Build Tools](https://docs.qmk.fm/#/getting_started_build_tools)
|
||||
|
||||
## Required Hardware
|
||||
|
||||
Apart from diodes and key switches for the keyboard matrix in each half, you
|
||||
will need:
|
||||
|
||||
* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
|
||||
* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
|
||||
|
||||
Alternatively, you can use any sort of cable and socket that has at least 3
|
||||
wires. If you want to use I2C to communicate between halves, you will need a
|
||||
cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
|
||||
|
||||
## Optional Hardware
|
||||
A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
|
||||
|
||||
## Wiring
|
||||
|
||||
The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
|
||||
PD0 on the ATmega32u4) between the two Pro Micros.
|
||||
|
||||
Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro
|
||||
and modify the `matrix.c` accordingly.
|
||||
|
||||
The wiring for serial:
|
||||
|
||||
|
||||
|
||||
The wiring for i2c:
|
||||
|
||||
|
||||
|
||||
The pull-up resistors may be placed on either half. It is also possible
|
||||
to use 4 resistors and have the pull-ups in both halves, but this is
|
||||
unnecessary in simple use cases.
|
||||
|
||||
You can change your configuration between serial and i2c by modifying your `config.h` file.
|
||||
|
||||
## Notes on Software Configuration
|
||||
|
||||
the keymaps in here are for the 4x5 layout of the keyboard only.
|
||||
|
||||
## Flashing
|
||||
|
||||
To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing).
|
||||
|
||||
Under Windows the most convenient way is installing the [QMK Drivers](https://github.com/qmk/qmk_driver_installer/releases) and use the [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases).
|
||||
|
||||
|
||||
## Choosing which board to plug the USB cable into (choosing Master)
|
||||
|
||||
### Setting the right or left hand as master
|
||||
|
||||
If you always plug the usb cable into the right board, add an extra flag to your `config.h`
|
||||
```
|
||||
#define MASTER_RIGHT
|
||||
```
|
||||
|
||||
OR
|
||||
|
||||
```
|
||||
#define MASTER_LEFT
|
||||
```
|
||||
|
||||
|
||||
Notes on Using Pro Micro 3.3V
|
||||
-----------------------------
|
||||
|
||||
Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
|
||||
the frequency on the 3.3V board.
|
||||
|
||||
Also, if the slave board is producing weird characters in certain columns,
|
||||
update the following line in `matrix.c` to the following:
|
||||
|
||||
```
|
||||
// _delay_us(30); // without this wait read unstable value.
|
||||
_delay_us(300); // without this wait read unstable value.
|
||||
```
|
||||
|
|
@ -0,0 +1,66 @@
|
|||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
Loading…
Reference in New Issue