[Keyboard] Maartenwut GH80-3700 (#9960)

* Add GH80-3700

* Add via keymap

* Update gh80_3700.h

* Update config.h

* LAYOUT_all -> LAYOUT_ortho_6x4

* Update readme.md
This commit is contained in:
Maarten Dekkers 2020-08-17 04:15:30 +02:00 committed by GitHub
parent febf27361a
commit 792a480244
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
18 changed files with 595 additions and 0 deletions

View File

@ -0,0 +1,143 @@
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4705
#define PRODUCT_ID 0x633A
#define DEVICE_VER 0x0001
#define MANUFACTURER Maartenwut
#define PRODUCT GH80 3700
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 4
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS {B3,C7,C6,B6,B5,B4}
#define MATRIX_COL_PINS {B0,D7,D6,D4}
#define UNUSED_PINS {}
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
// #define RGB_DI_PIN B2
// #ifdef RGB_DI_PIN
// #define RGBLED_NUM 8
// #define RGBLIGHT_HUE_STEP 8
// #define RGBLIGHT_SAT_STEP 8
// #define RGBLIGHT_VAL_STEP 8
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
// /*== all animations enable ==*/
// #define RGBLIGHT_ANIMATIONS
// /*== or choose animations ==*/
// #define RGBLIGHT_EFFECT_BREATHING
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
// #define RGBLIGHT_EFFECT_SNAKE
// #define RGBLIGHT_EFFECT_KNIGHT
// #define RGBLIGHT_EFFECT_CHRISTMAS
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
// #define RGBLIGHT_EFFECT_RGB_TEST
// #define RGBLIGHT_EFFECT_ALTERNATING
// /*== customize breathing effect ==*/
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
// /*==== use exp() and sin() ====*/
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
// #endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
// Define rotary encoder
#define ENCODERS_PAD_A { F1 }
#define ENCODERS_PAD_B { F4 }

View File

@ -0,0 +1,46 @@
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "gh80_3700.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
led_init_ports();
}
void led_init_ports(void) {
setPinOutput(E6);
setPinOutput(B1);
setPinOutput(D0);
setPinOutput(D1);
setPinOutput(F0);
writePinHigh(E6);
writePinHigh(B1);
writePinHigh(D0);
writePinHigh(D1);
writePinHigh(F0);
}
bool led_update_kb(led_t led_state) {
if(led_update_user(led_state)) {
writePin(E6, !led_state.num_lock);
}
return true;
}

View File

@ -0,0 +1,63 @@
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
/* This a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define LAYOUT_all LAYOUT_ortho_6x4
#define LAYOUT_ortho_6x4( \
k00, k01, k02, k03, \
k10, k11, k12, k13, \
k20, k21, k22, k23, \
k30, k31, k32, k33, \
k40, k41, k42, k43, \
k50, k51, k52, k53 \
) \
{ \
{ k00, k01, k02, k03 }, \
{ k10, k11, k12, k13 }, \
{ k20, k21, k22, k23 }, \
{ k30, k31, k32, k33 }, \
{ k40, k41, k42, k43 }, \
{ k50, k51, k52, k53 } \
}
#define LAYOUT_numpad_6x4( \
k00, k01, k02, k03, \
k10, k11, k12, k13, \
k20, k21, k22, \
k30, k31, k32, k33, \
k40, k41, k42, \
k50, k52, k53 \
) \
{ \
{ k00, k01, k02, k03 }, \
{ k10, k11, k12, k13 }, \
{ k20, k21, k22, KC_NO }, \
{ k30, k31, k32, k33 }, \
{ k40, k41, k42, KC_NO }, \
{ k50, KC_NO, k52, k53 } \
}

View File

@ -0,0 +1,72 @@
{
"keyboard_name": "GH80-3700",
"url": "https://github.com/Maartenwut/gh80-series/tree/master/GH80-3700",
"maintainer": "Maartenwut",
"width": 4,
"height": 7,
"layouts": {
"LAYOUT_ortho_6x4": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":0, "y":2},
{"x":1, "y":2},
{"x":2, "y":2},
{"x":3, "y":2},
{"x":0, "y":3},
{"x":1, "y":3},
{"x":2, "y":3},
{"x":3, "y":3},
{"x":0, "y":4},
{"x":1, "y":4},
{"x":2, "y":4},
{"x":3, "y":4},
{"x":0, "y":5},
{"x":1, "y":5},
{"x":2, "y":5},
{"x":3, "y":5},
{"x":0, "y":6},
{"x":1, "y":6},
{"x":2, "y":6},
{"x":3, "y":6}
]
},
"LAYOUT_numpad_6x4": {
"layout": [
{"x":0, "y":0},
{"x":1, "y":0},
{"x":2, "y":0},
{"x":3, "y":0},
{"x":0, "y":2},
{"x":1, "y":2},
{"x":2, "y":2},
{"x":3, "y":2},
{"x":0, "y":3},
{"x":1, "y":3},
{"x":2, "y":3},
{"x":0, "y":4},
{"x":1, "y":4},
{"x":2, "y":4},
{"x":3, "y":3, "h":2},
{"x":0, "y":5},
{"x":1, "y":5},
{"x":2, "y":5},
{"x":0, "y":6, "w":2},
{"x":2, "y":6},
{"x":3, "y":5, "h":2}
]
}
}
}

View File

@ -0,0 +1,26 @@
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_ortho_6x4(
KC_ESC, KC_TAB, KC_EQL, KC_BSPC,
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
KC_P7, KC_P8, KC_P9, KC_PPLS,
KC_P4, KC_P5, KC_P6, KC_PPLS,
KC_P1, KC_P2, KC_P3, KC_PENT,
KC_P0, KC_P0, KC_PDOT, KC_PENT),
};

View File

@ -0,0 +1 @@
This is the default keymap for the GH80-3700.

View File

@ -0,0 +1,69 @@
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#ifdef PS2_USE_USART
#define PS2_CLOCK_PORT PORTD
#define PS2_CLOCK_PIN PIND
#define PS2_CLOCK_DDR DDRD
#define PS2_CLOCK_BIT 5
#define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
#define PS2_DATA_BIT 2
/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
/* set DDR of CLOCK as input to be slave */
#define PS2_USART_INIT() do { \
PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
UCSR1C = ((1 << UMSEL10) | \
(3 << UPM10) | \
(0 << USBS1) | \
(3 << UCSZ10) | \
(0 << UCPOL1)); \
UCSR1A = 0; \
UBRR1H = 0; \
UBRR1L = 0; \
} while (0)
#define PS2_USART_RX_INT_ON() do { \
UCSR1B = ((1 << RXCIE1) | \
(1 << RXEN1)); \
} while (0)
#define PS2_USART_RX_POLL_ON() do { \
UCSR1B = (1 << RXEN1); \
} while (0)
#define PS2_USART_OFF() do { \
UCSR1C = 0; \
UCSR1B &= ~((1 << RXEN1) | \
(1 << TXEN1)); \
} while (0)
#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
#define PS2_USART_RX_DATA UDR1
#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
#define PS2_USART_RX_VECT USART1_RX_vect
#define PS2_MOUSE_ENABLE_SCROLLING
#define PS2_MOUSE_INIT_DELAY 1000
#define PS2_MOUSE_BTN_LEFT 0
#define PS2_MOUSE_BTN_RIGHT 1
#define PS2_MOUSE_BTN_MIDDLE 2
#define PS2_MOUSE_X_MULTIPLIER 2
#define PS2_MOUSE_Y_MULTIPLIER 2
#define PS2_MOUSE_V_MULTIPLIER 1
#define PS2_MOUSE_SCROLL_BTN_MASK 0
#define PS2_MOUSE_USE_REMOTE_MODE
#endif

View File

@ -0,0 +1,26 @@
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_ortho_6x4(
KC_ESC, KC_TAB, KC_EQL, KC_BSPC,
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
KC_P7, KC_P8, KC_P9, KC_PPLS,
KC_P4, KC_P5, KC_P6, KC_PPLS,
KC_P1, KC_P2, KC_P3, KC_PENT,
KC_P0, KC_P0, KC_PDOT, KC_PENT),
};

View File

@ -0,0 +1 @@
This is a keymap for the GH80-3700 with PS/2 mouse functionality enabled.

View File

@ -0,0 +1,5 @@
# Build Options
# change yes to no to disable
#
PS2_MOUSE_ENABLE = yes
PS2_USE_USART = yes

View File

@ -0,0 +1,21 @@
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define RGB_DI_PIN B2
#define RGBLED_NUM 8
#define RGBLIGHT_ANIMATIONS

View File

@ -0,0 +1,26 @@
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_ortho_6x4(
KC_ESC, KC_TAB, KC_EQL, KC_BSPC,
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
KC_P7, KC_P8, KC_P9, KC_PPLS,
KC_P4, KC_P5, KC_P6, KC_PPLS,
KC_P1, KC_P2, KC_P3, KC_PENT,
KC_P0, KC_P0, KC_PDOT, KC_PENT),
};

View File

@ -0,0 +1 @@
This is a keymap for the GH80-3700 with RGB enabled.

View File

@ -0,0 +1,4 @@
# Build Options
# change yes to no to disable
#
RGBLIGHT_ENABLE = yes

View File

@ -0,0 +1,50 @@
/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_ortho_6x4(
KC_ESC, KC_TAB, KC_EQL, KC_BSPC,
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
KC_P7, KC_P8, KC_P9, KC_PPLS,
KC_P4, KC_P5, KC_P6, KC_PPLS,
KC_P1, KC_P2, KC_P3, KC_PENT,
KC_P0, KC_P0, KC_PDOT, KC_PENT),
[1] = LAYOUT_ortho_6x4(
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______),
[2] = LAYOUT_ortho_6x4(
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______),
[3] = LAYOUT_ortho_6x4(
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______,
_______, _______, _______, _______),
};

View File

@ -0,0 +1,2 @@
VIA_ENABLE = yes
LTO_ENABLE = yes

View File

@ -0,0 +1,15 @@
# GH80-3700
![GH80-3700](https://i.imgur.com/xMCzb8vl.jpg)
## Support
* Keyboard Maintainer: [Maarten Dekkers](https://github.com/maartenwut)
* Hardware Supported: GH80-3700 PCB
* Hardware Availability: [maartenwut.com](https://maartenwut.com/product/gh80-3700-numpad-pcb/)
## Build
Make example for this keyboard (after setting up your build environment):
make maartenwut/gh80_3700:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,24 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = qmk-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
ENCODER_ENABLE = yes # Enable support for rotary encoders
LAYOUTS = numpad_6x4 ortho_6x4