Move `TAPPING_TOGGLE` to data driven (#21360)

keyboards/bajjak/config.h

@@ -43,8 +43,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_MAX_SPEED      7
 #define MOUSEKEY_WHEEL_DELAY 0
 
-#define TAPPING_TOGGLE  1
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/bajjak/info.json

@@ -10,6 +10,9 @@
     },
     "processor": "atmega32u4",
     "bootloader": "halfkay",
+    "tapping": {
+        "toggle": 1
+    },
     "layouts": {
         "LAYOUT_6x7": {
             "layout": [

keyboards/checkerboards/quark_lp/config.h

@@ -22,8 +22,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-#define TAPPING_TOGGLE 2
-
 #ifdef RGB_MATRIX_ENABLE
 #define RGB_MATRIX_LED_COUNT 51
 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses

keyboards/checkerboards/quark_lp/info.json

@@ -21,6 +21,9 @@
     "diode_direction": "COL2ROW",
     "processor": "atmega32u2",
     "bootloader": "atmel-dfu",
+    "tapping": {
+        "toggle": 2
+    },
     "layouts": {
         "LAYOUT_ortho_4x12": {
             "layout": [

keyboards/converter/a1200/mistress1200/config.h

@@ -17,8 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define TAPPING_TOGGLE 3
-
 #undef LOCKING_SUPPORT_ENABLE
 #undef LOCKING_RESYNC_ENABLE
 #define LAYER_STATE_8BIT

keyboards/converter/a1200/mistress1200/info.json

@@ -16,5 +16,8 @@
         "on_state": 0
     },
     "processor": "atmega16u4",
-    "bootloader": "atmel-dfu"
+    "bootloader": "atmel-dfu",
+    "tapping": {
+        "toggle": 3
+    }
 }

keyboards/dumbpad/config.h

@@ -1,20 +0,0 @@
-/*
-Copyright 2020 imchipwood
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-/* Reduce tapdance required taps from 5 to 2 */
-#define TAPPING_TOGGLE 2

keyboards/dumbpad/info.json

@@ -6,5 +6,8 @@
     "usb": {
         "vid": "0xDEAF",
         "pid": "0x0913"
+    },
+    "tapping": {
+        "toggle": 2
     }
 }

keyboards/dumbpad/v1x_oled/config.h

@@ -1,17 +0,0 @@
-/*
-Copyright 2020 imchipwood
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-/* Reduce tapdance required taps from 5 to 2 */
-#define TAPPING_TOGGLE 2

keyboards/ergodox_ez/config.h

@@ -44,8 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_WHEEL_MAX_SPEED    MOUSEKEY_MAX_SPEED
 #define MOUSEKEY_WHEEL_TIME_TO_MAX  MOUSEKEY_TIME_TO_MAX
 
-#define TAPPING_TOGGLE  1
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/ergodox_ez/info.json

@@ -18,6 +18,9 @@
     "processor": "atmega32u4",
     "bootloader": "halfkay",
     "debounce": 30,
+    "tapping": {
+        "toggle": 1
+    },
     "community_layouts": ["ergodox"],
     "layouts": {
         "LAYOUT_ergodox": {

keyboards/fungo/rev1/config.h

@@ -31,8 +31,3 @@
 
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
-
-//지정된 횟수로 눌러야 토글됨
-#define TAPPING_TOGGLE 3
-
-

keyboards/fungo/rev1/info.json

@@ -25,6 +25,9 @@
   "processor": "atmega32u4",
   "bootloader": "caterina",
   "debounce": 3,
+  "tapping": {
+    "toggle": 3
+  },
   "layout_aliases": {
     "LAYOUT_fungo_split_num": "LAYOUT"
   },

keyboards/gboards/ergotaco/config.h

@@ -32,7 +32,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_TIME_TO_MAX    60
 #define MOUSEKEY_MAX_SPEED      7
 #define MOUSEKEY_WHEEL_DELAY 0
-#define TAPPING_TOGGLE  1
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/gboards/ergotaco/info.json

@@ -10,6 +10,9 @@
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
+    "tapping": {
+        "toggle": 1
+    },
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/gboards/georgi/config.h

@@ -37,7 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_TIME_TO_MAX    60
 #define MOUSEKEY_MAX_SPEED      7
 #define MOUSEKEY_WHEEL_DELAY 0
-#define TAPPING_TOGGLE  2
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/gboards/georgi/info.json

@@ -11,6 +11,9 @@
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
+    "tapping": {
+        "toggle": 2
+    },
     "layout_aliases": {
         "LAYOUT_georgi": "LAYOUT"
     },

keyboards/gboards/gergo/config.h

@@ -41,7 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_TIME_TO_MAX    60
 #define MOUSEKEY_MAX_SPEED      7
 #define MOUSEKEY_WHEEL_DELAY 0
-#define TAPPING_TOGGLE  1
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/gboards/gergo/info.json

@@ -13,6 +13,9 @@
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
+    "tapping": {
+        "toggle": 1
+    },
     "layout_aliases": {
         "LAYOUT_gergo": "LAYOUT"
     },

keyboards/handwired/dactyl/config.h

@@ -37,8 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_MAX_SPEED    7
 #define MOUSEKEY_WHEEL_DELAY  0
 
-#define TAPPING_TOGGLE  1
-
 /* key combination for command */
 #define IS_COMMAND() ( \
     get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \

keyboards/handwired/dactyl/info.json

@@ -11,6 +11,9 @@
   "processor": "atmega32u4",
   "bootloader": "halfkay",
   "debounce": 15,
+  "tapping": {
+    "toggle": 1
+  },
   "layouts": {
     "LAYOUT_dactyl": {
       "layout": [

keyboards/handwired/dactyl_rah/config.h

@@ -24,9 +24,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_MAX_SPEED       7
 #define MOUSEKEY_WHEEL_DELAY 0
 
-/* layer config */
-#define TAPPING_TOGGLE 1
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

keyboards/handwired/dactyl_rah/info.json

@@ -18,6 +18,9 @@
   },
   "processor": "atmega32u4",
   "bootloader": "caterina",
+  "tapping": {
+    "toggle": 1
+  },
   "layouts": {
     "LAYOUT_6x6": {
       "layout": [

keyboards/handwired/frenchdev/config.h

@@ -31,8 +31,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_MAX_SPEED      2
 #define MOUSEKEY_WHEEL_DELAY 0
 
-#define TAPPING_TOGGLE  1
-
 /* key combination for command */
 #define IS_COMMAND() ( \
     get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \

keyboards/handwired/frenchdev/info.json

@@ -9,6 +9,9 @@
   },
   "processor": "atmega32u4",
   "bootloader": "halfkay",
+  "tapping": {
+    "toggle": 1
+  },
   "layouts": {
     "LAYOUT": {
       "layout": [

keyboards/handwired/jopr/config.h

@@ -7,7 +7,6 @@
 #define LOCKING_RESYNC_ENABLE
 
 #define NO_ACTION_ONESHOT
-#define TAPPING_TOGGLE 3
 
 #define RGBLIGHT_HUE_STEP 1
 #define RGBLIGHT_SAT_STEP 1

keyboards/handwired/jopr/info.json

@@ -21,6 +21,9 @@
   "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "atmel-dfu",
+  "tapping": {
+    "toggle": 3
+  },
   "layouts": {
     "LAYOUT": {
       "layout": [

keyboards/handwired/kbod/config.h

@@ -37,5 +37,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-
-#define TAPPING_TOGGLE 2

keyboards/handwired/kbod/info.json

@@ -18,6 +18,9 @@
     },
     "processor": "atmega32u4",
     "bootloader": "caterina",
+    "tapping": {
+        "toggle": 2
+    },
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/handwired/pterodactyl/config.h

@@ -37,8 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_MAX_SPEED    7
 #define MOUSEKEY_WHEEL_DELAY  0
 
-#define TAPPING_TOGGLE  1
-
 /* key combination for command */
 #define IS_COMMAND() ( \
     get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \

keyboards/handwired/pterodactyl/info.json

@@ -11,6 +11,9 @@
   "processor": "atmega32u4",
   "bootloader": "caterina",
   "debounce": 0,
+  "tapping": {
+    "toggle": 1
+  },
   "layouts": {
     "LAYOUT_pterodactyl": {
       "layout": [

keyboards/handwired/terminus_mini/config.h

@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-//define tapping-toggle count
-#define TAPPING_TOGGLE 1
-
 //define maximum duration of hold required to register a tap vs hold default is 200
 #define TAPPING_TERM 150 //reduce time required to register a held key
 

keyboards/handwired/terminus_mini/info.json

@@ -15,6 +15,9 @@
   "diode_direction": "COL2ROW",
   "processor": "atmega32u4",
   "bootloader": "halfkay",
+  "tapping": {
+    "toggle": 1
+  },
   "layouts": {
     "LAYOUT": {
       "layout": [

keyboards/hotdox/config.h

@@ -11,8 +11,6 @@
 #define MOUSEKEY_MAX_SPEED      7
 #define MOUSEKEY_WHEEL_DELAY    0
 
-#define TAPPING_TOGGLE  1
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/hotdox/info.json

@@ -12,6 +12,9 @@
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
+    "tapping": {
+      "toggle": 1
+    },
     "community_layouts": ["ergodox"],
     "layouts": {
     "LAYOUT_ergodox": {

keyboards/input_club/ergodox_infinity/config.h

@@ -23,8 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_MAX_SPEED      7
 #define MOUSEKEY_WHEEL_DELAY 0
 
-#define TAPPING_TOGGLE  1
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/input_club/ergodox_infinity/info.json

@@ -17,6 +17,9 @@
     "processor": "MK20DX256",
     "bootloader": "kiibohd",
     "board": "IC_TEENSY_3_1",
+    "tapping": {
+        "toggle": 1
+    },
     "community_layouts": ["ergodox"],
     "layouts": {
         "LAYOUT_ergodox": {

keyboards/nack/config.h

@@ -17,8 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define TAPPING_TOGGLE 2
-
 #ifdef RGB_MATRIX_ENABLE
     #define WS2812_SPI SPID1
     #define WS2812_SPI_MOSI_PAL_MODE 5

keyboards/nack/info.json

@@ -23,6 +23,9 @@
     "processor": "STM32F303",
     "bootloader": "stm32-dfu",
     "board": "QMK_PROTON_C",
+    "tapping": {
+        "toggle": 2
+    },
     "layout_aliases": {
         "LAYOUT": "LAYOUT_ortho_4x13"
     },

keyboards/neopad/config.h

@@ -1,20 +0,0 @@
-/*
-Copyright 2021 rookiebwoy
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-/* Reduce tapdance required taps from 5 to 2 */
-#define TAPPING_TOGGLE 2

keyboards/neopad/rev1/info.json

@@ -21,6 +21,9 @@
     },
     "processor": "atmega32u4",
     "bootloader": "caterina",
+    "tapping": {
+        "toggle": 2
+    },
     "layouts": {
         "LAYOUT": {
             "layout": [

keyboards/planck/ez/config.h

@@ -110,8 +110,6 @@
 #define ENABLE_RGB_MATRIX_SOLID_SPLASH
 #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
-#define TAPPING_TOGGLE  1
-
 #define MOUSEKEY_INTERVAL           20
 #define MOUSEKEY_DELAY              0
 #define MOUSEKEY_TIME_TO_MAX        60

keyboards/planck/ez/info.json

@@ -21,6 +21,9 @@
   },
   "processor": "STM32F303",
   "bootloader": "stm32-dfu",
+  "tapping": {
+    "toggle": 1
+  },
   "community_layouts": ["ortho_4x12", "planck_mit"],
   "layout_aliases": {
     "LAYOUT_planck_grid": "LAYOUT_ortho_4x12",

keyboards/planck/thk/config.h

@@ -18,8 +18,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define TAPPING_TOGGLE 3
-
 #define DIP_SWITCH_PINS { D0, D1, D4, D6 }
 
 // THK uses D5 for audio

keyboards/planck/thk/info.json

@@ -21,6 +21,9 @@
   },
   "processor": "atmega32a",
   "bootloader": "usbasploader",
+  "tapping": {
+    "toggle": 3
+  },
   "layout_aliases": {
     "LAYOUT_planck_grid": "LAYOUT_ortho_4x12",
     "LAYOUT_planck_mit": "LAYOUT_planck_1x2uC"

keyboards/ymdk/ymd96/config.h

@@ -19,8 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define TAPPING_TOGGLE 3
-
 /* RGB underglow */
 #define RGBLIGHT_EFFECT_BREATHING
 #define RGBLIGHT_EFFECT_RAINBOW_MOOD

keyboards/ymdk/ymd96/info.json

@@ -32,6 +32,9 @@
     },
     "processor": "atmega32a",
     "bootloader": "bootloadhid",
+    "tapping": {
+        "toggle": 3
+    },
     "layouts": {
         "LAYOUT_default": {
             "layout": [