Merge remote-tracking branch 'origin/master' into develop
This commit is contained in:
QMK Bot
commit
8c1c377272
|
|
@ -0,0 +1,56 @@
|
|||
// Copyright 2022 Cable Car Designs (@westfoxtrot)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x41FF
|
||||
#define PRODUCT_ID 0xAA99
|
||||
#define DEVICE_VER 0x0002
|
||||
#define MANUFACTURER cablecardesigns
|
||||
#define PRODUCT cypher
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 10
|
||||
#define MATRIX_COLS 10
|
||||
|
||||
#define MATRIX_ROW_PINS { B0, F1, F5, F6, F7, D1, F4, D4, C6, C7 }
|
||||
#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, B7, B3, B2, B1, F0 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_BREATHING
|
||||
#define BACKLIGHT_LEVELS 5
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
#define BACKLIGHT_PIN D0
|
||||
|
||||
#define RGB_DI_PIN D5
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 3
|
||||
#define RGBLIGHT_HUE_STEP 12
|
||||
#define RGBLIGHT_SAT_STEP 25
|
||||
#define RGBLIGHT_VAL_STEP 12
|
||||
#define RGBLIGHT_LIMIT_VAL 255
|
||||
#define RGBLIGHT_SLEEP
|
||||
#define RGBLIGHT_EFFECT_BREATHING
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
#define RGBLIGHT_EFFECT_SNAKE
|
||||
#define RGBLIGHT_EFFECT_KNIGHT
|
||||
#define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
#define RGBLIGHT_EFFECT_RGB_TEST
|
||||
#define RGBLIGHT_EFFECT_ALTERNATING
|
||||
#define RGBLIGHT_EFFECT_TWINKLE
|
||||
#endif
|
||||
|
|
@ -0,0 +1,108 @@
|
|||
{
|
||||
"keyboard_name": "Cypher Rev6",
|
||||
"layouts": {
|
||||
"LAYOUT_all": {
|
||||
"layout": [
|
||||
{"label":"~","x":0,"y":0},
|
||||
{"label":"!","x":1,"y":0},
|
||||
{"label":"@","x":2,"y":0},
|
||||
{"label":"#","x":3,"y":0},
|
||||
{"label":"$","x":4,"y":0},
|
||||
{"label":"%","x":5,"y":0},
|
||||
{"label":"^","x":6,"y":0},
|
||||
{"label":"&","x":7,"y":0},
|
||||
{"label":"*","x":8,"y":0},
|
||||
{"label":"(","x":9,"y":0},
|
||||
{"label":")","x":10,"y":0},
|
||||
{"label":"_","x":11,"y":0},
|
||||
{"label":"+","x":12,"y":0},
|
||||
{"label":"Backspace","x":13,"y":0},
|
||||
{"label":"~","x":14,"y":0},
|
||||
|
||||
{"label":"Num Lock","x":15.5,"y":0},
|
||||
{"label":"/","x":16.5,"y":0},
|
||||
{"label":"*","x":17.5,"y":0},
|
||||
{"label":"-","x":18.5,"y":0},
|
||||
|
||||
{"label":"Tab","x":0,"y":1,"w":1.5},
|
||||
{"label":"Q","x":1.5,"y":1},
|
||||
{"label":"W","x":2.5,"y":1},
|
||||
{"label":"E","x":3.5,"y":1},
|
||||
{"label":"R","x":4.5,"y":1},
|
||||
{"label":"T","x":5.5,"y":1},
|
||||
{"label":"Y","x":6.5,"y":1},
|
||||
{"label":"U","x":7.5,"y":1},
|
||||
{"label":"I","x":8.5,"y":1},
|
||||
{"label":"O","x":9.5,"y":1},
|
||||
{"label":"P","x":10.5,"y":1},
|
||||
{"label":"{","x":11.5,"y":1},
|
||||
{"label":"}","x":12.5,"y":1},
|
||||
{"label":"|","x":13.5,"y":1,"w":1.5},
|
||||
|
||||
{"label":"7","x":15.5,"y":1},
|
||||
{"label":"8","x":16.5,"y":1},
|
||||
{"label":"9","x":17.5,"y":1},
|
||||
{"label":"+","x":18.5,"y":1},
|
||||
|
||||
{"label":"Caps Lock","x":0,"y":2,"w":1.75},
|
||||
{"label":"A","x":1.75,"y":2},
|
||||
{"label":"S","x":2.75,"y":2},
|
||||
{"label":"D","x":3.75,"y":2},
|
||||
{"label":"F","x":4.75,"y":2},
|
||||
{"label":"G","x":5.75,"y":2},
|
||||
{"label":"H","x":6.75,"y":2},
|
||||
{"label":"J","x":7.75,"y":2},
|
||||
{"label":"K","x":8.75,"y":2},
|
||||
{"label":"L","x":9.75,"y":2},
|
||||
{"label":":","x":10.75,"y":2},
|
||||
{"label":"\"","x":11.75,"y":2},
|
||||
{"label":"NUHS","x":12.75,"y":2},
|
||||
{"label":"Enter","x":13.75,"y":2,"w":1.25},
|
||||
|
||||
{"label":"4","x":15.5,"y":2},
|
||||
{"label":"5","x":16.5,"y":2},
|
||||
{"label":"6","x":17.5,"y":2},
|
||||
{"label":"=","x":18.5,"y":2},
|
||||
|
||||
{"label":"Shift","x":0,"y":3,"w":1.25},
|
||||
{"label":"Shift","x":1.25,"y":3},
|
||||
{"label":"Z","x":2.25,"y":3},
|
||||
{"label":"X","x":3.25,"y":3},
|
||||
{"label":"C","x":4.25,"y":3},
|
||||
{"label":"V","x":5.25,"y":3},
|
||||
{"label":"B","x":6.25,"y":3},
|
||||
{"label":"N","x":7.25,"y":3},
|
||||
{"label":"M","x":8.25,"y":3},
|
||||
{"label":"<","x":9.25,"y":3},
|
||||
{"label":">","x":10.25,"y":3},
|
||||
{"label":"?","x":11.25,"y":3},
|
||||
{"label":"Shift","x":12.25,"y":3,"w":1.75},
|
||||
|
||||
{"label":"Up","x":14.25,"y":3.25},
|
||||
|
||||
{"label":"1","x":15.5,"y":3},
|
||||
{"label":"2","x":16.5,"y":3},
|
||||
{"label":"3","x":17.5,"y":3},
|
||||
{"label":"Enter","x":18.5,"y":3},
|
||||
|
||||
{"label":"Ctrl","x":0,"y":4,"w":1.25},
|
||||
{"label":"Win","x":1.25,"y":4},
|
||||
{"label":"Alt","x":2.25,"y":4,"w":1.25},
|
||||
{"label":"Space","x":3.5,"y":4,"w":1.5},
|
||||
{"label":"Space","x":5,"y":4,"w":3},
|
||||
{"label":"Space","x":8,"y":4,"w":1.5},
|
||||
{"label":"Alt","x":9.5,"y":4,"w":1.25},
|
||||
{"label":"Win","x":10.75,"y":4},
|
||||
{"label":"Ctrl","x":11.75,"y":4,"w":1.25},
|
||||
|
||||
{"label":"Left","x":13.25,"y":4.25},
|
||||
{"label":"Down","x":14.25,"y":4.25},
|
||||
{"label":"Right","x":15.25,"y":4.25},
|
||||
|
||||
{"label":"0","x":16.5,"y":4},
|
||||
{"label":".","x":17.5,"y":4},
|
||||
{"label":"Backspace","x":18.5,"y":4}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
// Copyright 2022 Cable Car Designs (@westfoxtrot)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#pragma once
|
||||
|
||||
#define RGBLIGHT_LAYERS
|
||||
#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
|
||||
#define RGBLIGHT_DEFAULT_VAL 0
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
// Copyright 2022 Cable Car Designs (@westfoxtrot)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
enum custom_layers {
|
||||
_MA,
|
||||
_F1,
|
||||
};
|
||||
|
||||
const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
|
||||
{1, 1, HSV_GREEN}
|
||||
);
|
||||
|
||||
const rgblight_segment_t PROGMEM my_numlock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
|
||||
{2, 1, HSV_BLUE}
|
||||
);
|
||||
|
||||
const rgblight_segment_t PROGMEM my_layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS(
|
||||
{0, 1, HSV_RED}
|
||||
);
|
||||
|
||||
const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(
|
||||
my_capslock_layer,
|
||||
my_numlock_layer,
|
||||
my_layer1_layer
|
||||
);
|
||||
|
||||
void keyboard_post_init_user(void) {
|
||||
// Enable the LED layers
|
||||
rgblight_layers = my_rgb_layers;
|
||||
}
|
||||
|
||||
bool led_update_user(led_t led_state) {
|
||||
rgblight_set_layer_state(0, led_state.caps_lock);
|
||||
rgblight_set_layer_state(1, led_state.num_lock);
|
||||
return true;
|
||||
}
|
||||
|
||||
layer_state_t layer_state_set_user(layer_state_t state) {
|
||||
rgblight_set_layer_state(2, layer_state_cmp(state, _F1));
|
||||
return state;
|
||||
}
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_MA] = LAYOUT_all( /* Base */
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_TAB, RGB_TOG, RGB_MODE_RGBTEST, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_NO, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PEQL,
|
||||
KC_LSFT,KC_NO ,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC,KC_SPC,KC_SPC, KC_RALT,KC_RALT,MO(_F1), KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT, KC_BSPC),
|
||||
|
||||
[_F1] = LAYOUT_all( /* Function Layer */
|
||||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL , _______, _______, _______, _______, _______,
|
||||
_______, BL_TOGG,BL_STEP,BL_ON,BL_OFF,BL_INC,BL_DEC,BL_BRTG,_______,_______,_______,_______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______, _______, _______, _______, _______, _______,
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______,_______, _______,_______,_______, _______,_______,_______, _______,_______,_______, _______, _______, _______),
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The default keymap for cypher
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
// Copyright 2022 Cable Car Designs (@westfoxtrot)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#pragma once
|
||||
|
||||
#define RGBLIGHT_LAYERS
|
||||
#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
|
||||
#define RGBLIGHT_DEFAULT_VAL 0
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
// Copyright 2022 Cable Car Designs (@westfoxtrot)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
enum custom_layers {
|
||||
_MA,
|
||||
_F1,
|
||||
};
|
||||
|
||||
const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
|
||||
{1, 1, HSV_GREEN}
|
||||
);
|
||||
|
||||
const rgblight_segment_t PROGMEM my_numlock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
|
||||
{2, 1, HSV_BLUE}
|
||||
);
|
||||
|
||||
const rgblight_segment_t PROGMEM my_layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS(
|
||||
{0, 1, HSV_RED}
|
||||
);
|
||||
|
||||
const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(
|
||||
my_capslock_layer,
|
||||
my_numlock_layer,
|
||||
my_layer1_layer
|
||||
);
|
||||
|
||||
void keyboard_post_init_user(void) {
|
||||
// Enable the LED layers
|
||||
rgblight_layers = my_rgb_layers;
|
||||
}
|
||||
|
||||
bool led_update_user(led_t led_state) {
|
||||
rgblight_set_layer_state(0, led_state.caps_lock);
|
||||
rgblight_set_layer_state(1, led_state.num_lock);
|
||||
return true;
|
||||
}
|
||||
|
||||
layer_state_t layer_state_set_user(layer_state_t state) {
|
||||
rgblight_set_layer_state(2, layer_state_cmp(state, _F1));
|
||||
return state;
|
||||
}
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_MA] = LAYOUT_all( /* Base */
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_NO, KC_P7, KC_P8, KC_P9, KC_PPLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PEQL,
|
||||
KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_LCTRL, KC_LGUI,KC_LALT, KC_NO,KC_SPC,KC_NO, KC_RALT,KC_RGUI,MO(_F1), KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT, KC_BSPC),
|
||||
|
||||
[_F1] = LAYOUT_all( /* Function Layer */
|
||||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______,
|
||||
_______, BL_TOGG,BL_STEP,BL_ON,BL_OFF,BL_INC,BL_DEC,BL_BRTG,_______,_______,_______,_______, _______,_______, _______, _______, _______, _______,
|
||||
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______, _______, _______, _______,
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______,_______, _______,_______,_______, _______,_______,_______, _______,_______,_______, _______, _______, _______),
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The default iso keymap for cypher
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
// Copyright 2022 Cable Car Designs (@westfoxtrot)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#pragma once
|
||||
|
||||
#define RGBLIGHT_LAYERS
|
||||
#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF
|
||||
#define RGBLIGHT_DEFAULT_VAL 0
|
||||
|
|
@ -0,0 +1,71 @@
|
|||
// Copyright 2022 Cable Car Designs (@westfoxtrot)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/* VIA Layout > http://www.keyboard-layout-editor.com/#/gists/0e8d4957e77f3179aa09bd6e195f7afa */
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
|
||||
{1, 1, HSV_GREEN}
|
||||
);
|
||||
|
||||
const rgblight_segment_t PROGMEM my_numlock_layer[] = RGBLIGHT_LAYER_SEGMENTS(
|
||||
{2, 1, HSV_BLUE}
|
||||
);
|
||||
|
||||
const rgblight_segment_t PROGMEM my_layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS(
|
||||
{0, 1, HSV_RED}
|
||||
);
|
||||
|
||||
const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(
|
||||
my_capslock_layer,
|
||||
my_numlock_layer,
|
||||
my_layer1_layer
|
||||
);
|
||||
|
||||
void keyboard_post_init_user(void) {
|
||||
// Enable the LED layers
|
||||
rgblight_layers = my_rgb_layers;
|
||||
}
|
||||
|
||||
bool led_update_user(led_t led_state) {
|
||||
rgblight_set_layer_state(0, led_state.caps_lock);
|
||||
rgblight_set_layer_state(1, led_state.num_lock);
|
||||
return true;
|
||||
}
|
||||
|
||||
layer_state_t layer_state_set_user(layer_state_t state) {
|
||||
rgblight_set_layer_state(2, layer_state_cmp(state, _F1));
|
||||
return state;
|
||||
}
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_all(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PEQL,
|
||||
KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RALT, MO(1), KC_LEFT,KC_DOWN,KC_RGHT, KC_P0, KC_PDOT, KC_BSPC),
|
||||
|
||||
[1] = LAYOUT_all(
|
||||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, BL_TOGG, BL_STEP, BL_ON, BL_OFF, BL_INC, BL_DEC, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
|
||||
[2] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
|
||||
[3] = LAYOUT_all(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1,2 @@
|
|||
VIA_ENABLE = yes
|
||||
LTO_ENABLE = yes
|
||||
|
|
@ -0,0 +1,25 @@
|
|||
# cypher rev6
|
||||
|
||||
PCB for the cypher keyboard, this is rev6 of this PCB
|
||||
|
||||
* Keyboard Maintainer: [westfoxtrot](https://github.com/westfoxtrot)
|
||||
* Hardware Supported: Cypher PCB revisions 6 (Rev # is printed on PCB)
|
||||
* Hardware Availability: with keyboard release + [Files released here](https://github.com/westfoxtrot/Cypher_PCB)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make cablecardesigns/cypher/rev6:default
|
||||
|
||||
Flashing example for this keyboard:
|
||||
|
||||
make cablecardesigns/cypher/rev6:default:flash
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
## Bootloader
|
||||
|
||||
Enter the bootloader in 3 ways:
|
||||
|
||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||||
* **Physical reset button**: There are 2 holes underneath the spacebar position that if shorted will enter bootloader
|
||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
// Copyright 2022 Cable Car Designs (@westfoxtrot)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#include "rev6.h"
|
||||
|
|
@ -0,0 +1,27 @@
|
|||
// Copyright 2022 Cable Car Designs (@westfoxtrot)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
#pragma once
|
||||
|
||||
#define ___ KC_NO
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_all( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K50, K51, K52, K53, K54, K55, K56, K57, K58,\
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K60, K61, K62, K63, K65, K66, K67, K68, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K70, K71, K72, K73, K75, K76, K77, K78, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K80, K81, K82, K83, K85, K86, K87, K88, \
|
||||
K40, K41, K42, K44, K46, K47, K49, K90, K91, K92, K93, K95, K96, K97, K98 \
|
||||
) \
|
||||
{ \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39 }, \
|
||||
{ K40, K41, K42, ___, K44, ___, K46, K47, ___, K49 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \
|
||||
{ K60, K61, K62, K63, ___, K65, K66, K67, K68 }, \
|
||||
{ K70, K71, K72, K73, ___, K75, K76, K77, K78 }, \
|
||||
{ K80, K81, K82, K83, ___, K85, K86, K87, K88 }, \
|
||||
{ K90, K91, K92, K93, ___, K95, K96, K97, K98 } \
|
||||
}
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Enable N-key Rollover
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
Loading…
Reference in New Issue