[Keyboard] Update to ZSA Keyboards (#15644)

keyboards/ergodox_ez/config.h

@@ -43,12 +43,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_EXPANDER_COL_PINS { 5, 4, 3, 2, 1, 0 }
 #define MATRIX_EXPANDER_ROW_PINS { 0, 1, 2, 3, 4, 5, 6 }
 
-
 #define MOUSEKEY_INTERVAL           20
 #define MOUSEKEY_DELAY              0
 #define MOUSEKEY_TIME_TO_MAX        60
 #define MOUSEKEY_MAX_SPEED          7
-#define MOUSEKEY_WHEEL_DELAY 0
+#define MOUSEKEY_WHEEL_DELAY        400
+#define MOUSEKEY_WHEEL_INTERVAL     MOUSEKEY_INTERVAL
+#define MOUSEKEY_WHEEL_MAX_SPEED    MOUSEKEY_MAX_SPEED
+#define MOUSEKEY_WHEEL_TIME_TO_MAX  MOUSEKEY_TIME_TO_MAX
 
 #define DEBOUNCE 30
 

keyboards/ergodox_ez/ergodox_ez.c

@@ -398,3 +398,54 @@ void eeconfig_init_kb(void) {  // EEPROM is getting reset!
     eeconfig_update_kb(keyboard_config.raw);
     eeconfig_init_user();
 }
+
+#ifdef ORYX_ENABLE
+static uint16_t loops = 0;
+static bool is_on = false;
+#endif
+
+#ifdef DYNAMIC_MACRO_ENABLE
+static bool is_dynamic_recording = false;
+static uint16_t dynamic_loop_timer;
+
+void dynamic_macro_record_start_user(void) {
+    is_dynamic_recording = true;
+    dynamic_loop_timer = timer_read();
+    ergodox_right_led_1_on();
+}
+
+void dynamic_macro_record_end_user(int8_t direction) {
+    is_dynamic_recording = false;
+    layer_state_set_user(layer_state);
+}
+#endif
+
+void matrix_scan_kb(void) {
+#ifdef DYNAMIC_MACRO_ENABLE
+    if (is_dynamic_recording) {
+        ergodox_right_led_1_off();
+        // if (timer_elapsed(dynamic_loop_timer) > 5)
+        {
+            static uint8_t counter;
+            counter++;
+            if (counter > 100) ergodox_right_led_1_on();
+            dynamic_loop_timer = timer_read();
+        }
+    }
+#endif
+
+#ifdef CAPS_LOCK_STATUS
+    led_t led_state = host_keyboard_led_state();
+    if(led_state.caps_lock) {
+        ergodox_right_led_3_on();
+    }
+    else {
+        uint8_t layer = get_highest_layer(layer_state);
+        if(layer != 1) {
+        ergodox_right_led_3_off();
+        }
+    }
+#endif
+
+    matrix_scan_user();
+}

keyboards/ergodox_ez/ergodox_ez.h

@@ -292,3 +292,25 @@ extern keyboard_config_t keyboard_config;
     { R05, R15, R25, R35, R45, R55 },     \
     { R06, R16, R26, R36, R46, KC_NO }    \
     }
+
+/*  ---- LEFT HAND ----     ---- RIGHT HAND ---- */
+#define LED_LAYOUT_ergodox_pretty(                \
+    L01,L02,L03,L04,L05,    R01,R02,R03,R04,R05,  \
+    L11,L12,L13,L14,L15,    R11,R12,R13,R14,R15,  \
+    L21,L22,L23,L24,L25,    R21,R22,R23,R24,R25,  \
+    L31,L32,L33,L34,L35,    R31,R32,R33,R34,R35,  \
+    L41,L42,L43,L44,            R42,R43,R44,R45 ) \
+                                                  \
+   /* matrix positions */                         \
+    { R01, R02, R03, R04, R05,                    \
+      R11, R12, R13, R14, R15,                    \
+      R21, R22, R23, R24, R25,                    \
+      R31, R32, R33, R34, R35,                    \
+           R42, R43, R44, R45,                    \
+                                                  \
+      L05, L04, L03, L02, L01,                    \
+      L15, L14, L13, L12, L11,                    \
+      L25, L24, L23, L22, L21,                    \
+      L35, L34, L33, L32, L31,                    \
+           L44, L43, L42, L41                     \
+    }

keyboards/ergodox_ez/rules.mk

@@ -16,11 +16,11 @@ BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
 MOUSEKEY_ENABLE  = yes  # Mouse keys
 EXTRAKEY_ENABLE  = yes  # Audio control and System control
 CONSOLE_ENABLE   = no   # Console for debug
-COMMAND_ENABLE   = yes  # Commands for debug and configuration
+COMMAND_ENABLE   = no   # Commands for debug and configuration
 CUSTOM_MATRIX    = lite # Custom matrix file for the ErgoDox EZ
 NKRO_ENABLE      = yes           # Enable N-Key Rollover
-UNICODE_ENABLE   = yes  # Unicode
+UNICODE_ENABLE   = no  # Unicode
-SWAP_HANDS_ENABLE= yes  # Allow swapping hands of keyboard
+SWAP_HANDS_ENABLE= no   # Allow swapping hands of keyboard
 
 RGB_MATRIX_ENABLE = no # enable later
 RGB_MATRIX_DRIVER = IS31FL3731
@@ -36,3 +36,5 @@ LAYOUTS = ergodox
 # Disable unsupported hardware
 AUDIO_SUPPORTED = no
 BACKLIGHT_SUPPORTED = no
+
+MOUSE_SHARED_EP = no

keyboards/moonlander/config.h

@@ -141,6 +141,18 @@
 #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
 #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
+// #define RGB_MATRIX_LED_PROCESS_LIMIT 5
+// #define RGB_MATRIX_LED_FLUSH_LIMIT 26
+
+#define MOUSEKEY_INTERVAL           20
+#define MOUSEKEY_DELAY              0
+#define MOUSEKEY_TIME_TO_MAX        60
+#define MOUSEKEY_MAX_SPEED          7
+#define MOUSEKEY_WHEEL_DELAY        400
+#define MOUSEKEY_WHEEL_INTERVAL     MOUSEKEY_INTERVAL
+#define MOUSEKEY_WHEEL_MAX_SPEED    MOUSEKEY_MAX_SPEED
+#define MOUSEKEY_WHEEL_TIME_TO_MAX  MOUSEKEY_TIME_TO_MAX
+
 #define MUSIC_MAP
 
 #define FIRMWARE_VERSION_SIZE 17

keyboards/moonlander/moonlander.c

@@ -19,9 +19,6 @@
 
 
 #include "moonlander.h"
-#ifdef WEBUSB_ENABLE
-#    include "webusb.h"
-#endif
 
 keyboard_config_t keyboard_config;
 
@@ -83,50 +80,9 @@ void moonlander_led_task(void) {
         wait_ms(155);
     }
 #endif
-#ifdef WEBUSB_ENABLE
+#if !defined(MOONLANDER_USER_LEDS)
-    else if (webusb_state.pairing == true) {
+    else {
-        static uint8_t led_mask;
+        layer_state_set_kb(layer_state);
-
-        ML_LED_1(false);
-        ML_LED_2(false);
-        ML_LED_3(false);
-        ML_LED_4(false);
-        ML_LED_5(false);
-        ML_LED_6(false);
-
-        if (!led_mask) {
-            led_mask = 1;
-        } else {
-            led_mask++;
-            if (led_mask > 12) led_mask = 1;
-        }
-        switch (led_mask) {
-            case 1:
-            case 12:
-                ML_LED_1(true);
-                break;
-            case 2:
-            case 11:
-                ML_LED_2(true);
-                break;
-            case 3:
-            case 10:
-                ML_LED_3(true);
-                break;
-            case 4:
-            case 9:
-                ML_LED_4(true);
-                break;
-            case 5:
-            case 8:
-                ML_LED_5(true);
-                break;
-            case 6:
-            case 7:
-                ML_LED_6(true);
-                break;
-        }
-        wait_ms(150);
     }
 #endif
 }
@@ -163,40 +119,53 @@ void keyboard_pre_init_kb(void) {
 layer_state_t layer_state_set_kb(layer_state_t state) {
     state = layer_state_set_user(state);
     if (is_launching || !keyboard_config.led_level) return state;
-
+    bool LED_1 = false;
-    ML_LED_1(false);
+    bool LED_2 = false;
-    ML_LED_2(false);
+    bool LED_3 = false;
-    ML_LED_3(false);
+    bool LED_4 = false;
-    ML_LED_4(false);
+    bool LED_5 = false;
-    ML_LED_5(false);
+    bool LED_6 = false;
-    ML_LED_6(false);
 
     uint8_t layer = get_highest_layer(state);
     switch (layer) {
         case 1:
-            ML_LED_1(1);
+            LED_1 = true;
-            ML_LED_4(1);
+            LED_4 = true;
             break;
         case 2:
-            ML_LED_2(1);
+            LED_2 = true;
-            ML_LED_5(1);
+            LED_5 = true;
             break;
         case 3:
-            ML_LED_3(1);
+            LED_3 = true;
+#if !defined(CAPS_LOCK_STATUS)
+            LED_6 = true;
+#endif
             break;
         case 4:
-            ML_LED_4(1);
+            LED_4 = true;
             break;
         case 5:
-            ML_LED_5(1);
+            LED_5 = true;
             break;
         case 6:
-            ML_LED_6(1);
+#if !defined(CAPS_LOCK_STATUS)
+            LED_6 = true;
+#endif
             break;
         default:
             break;
     }
 
+    ML_LED_1(LED_1);
+    ML_LED_2(LED_2);
+    ML_LED_3(LED_3);
+    ML_LED_4(LED_4);
+    ML_LED_5(LED_5);
+#if !defined(CAPS_LOCK_STATUS)
+    ML_LED_6(LED_6);
+#endif
+
     return state;
 }
 #endif
@@ -398,15 +367,19 @@ const uint8_t music_map[MATRIX_ROWS][MATRIX_COLS] = LAYOUT_moonlander(
 // clang-format on
 #endif
 
-#ifdef ORYX_CONFIGURATOR
+#ifdef CAPS_LOCK_STATUS
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        ML_LED_6(led_state.caps_lock);
+    }
+    return res;
+}
+#endif
+
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
     if (!process_record_user(keycode, record)) { return false; }
     switch (keycode) {
-#ifdef WEBUSB_ENABLE
-        case WEBUSB_PAIR:
-            if (!record->event.pressed && !webusb_state.pairing) layer_state_set_kb(layer_state);
-            break;
-#endif
 #if !defined(MOONLANDER_USER_LEDS)
         case LED_LEVEL:
             if (record->event.pressed) {
@@ -454,8 +427,6 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
     return true;
 }
 
-#endif
-
 void matrix_init_kb(void) {
     keyboard_config.raw = eeconfig_read_kb();
 

keyboards/moonlander/rules.mk

@@ -16,6 +16,7 @@ NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = yes          # Audio output
+AUDIO_DRIVER = dac_additive
 CUSTOM_MATRIX = lite
 SWAP_HANDS_ENABLE = yes
 RGB_MATRIX_ENABLE = yes
@@ -25,3 +26,5 @@ EEPROM_DRIVER = i2c
 #project specific files
 SRC += matrix.c
 QUANTUM_LIB_SRC += i2c_master.c
+
+MOUSE_SHARED_EP = no

keyboards/planck/ez/config.h

@@ -187,4 +187,7 @@
 #define MOUSEKEY_DELAY              0
 #define MOUSEKEY_TIME_TO_MAX        60
 #define MOUSEKEY_MAX_SPEED          7
-#define MOUSEKEY_WHEEL_DELAY 0
+#define MOUSEKEY_WHEEL_DELAY        400
+#define MOUSEKEY_WHEEL_INTERVAL     MOUSEKEY_INTERVAL
+#define MOUSEKEY_WHEEL_MAX_SPEED    MOUSEKEY_MAX_SPEED
+#define MOUSEKEY_WHEEL_TIME_TO_MAX  MOUSEKEY_TIME_TO_MAX

keyboards/planck/ez/ez.c

@@ -106,16 +106,6 @@ led_config_t g_led_config = { {
     1, 1, 1, 1, 1, 4, 1, 1, 1, 1, 1
 } };
 
-void suspend_power_down_kb(void) {
-    rgb_matrix_set_color_all(0, 0, 0);
-    rgb_matrix_set_suspend_state(true);
-    suspend_power_down_user();
-}
-
- void suspend_wakeup_init_kb(void) {
-    rgb_matrix_set_suspend_state(false);
-    suspend_wakeup_init_user();
-}
 #endif
 
 /* Left B9   Right B8 */
@@ -259,7 +249,7 @@ layer_state_t layer_state_set_kb(layer_state_t state) {
     planck_ez_left_led_off();
     planck_ez_right_led_off();
     state = layer_state_set_user(state);
-    uint8_t layer = biton32(state);
+    uint8_t layer = get_highest_layer(state);
     switch (layer) {
         case PLANCK_EZ_LED_LOWER:
             planck_ez_left_led_on();

keyboards/planck/ez/rules.mk

@@ -15,6 +15,7 @@ COMMAND_ENABLE = yes       # Commands for debug and configuration
 NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = yes          # Audio output
+AUDIO_DRIVER = dac_additive
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 
 ENCODER_ENABLE = yes
@@ -26,3 +27,5 @@ LAYOUTS_HAS_RGB = no
 RGB_MATRIX_SUPPORTED = yes
 RGBLIGHT_SUPPORTED = no
 BAKCLIGHT_SUPPORTED = no
+
+MOUSE_SHARED_EP = no