Add Bonsai C4 as a platform board file (#18901)
* Set up Bonsai C4 as a platform board file * corrections and improvements based on testing and feedback * Added VBUS sensing as default capability for improved split support using Bonsai C4 * Update clock divisor for SPI flash Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org>
This commit is contained in:
David Hoelscher
GitHub
parent
7901ba431a
commit
a42ab90220
|
|
@ -70,7 +70,7 @@
|
|||
"bonsai_c4": {
|
||||
"processor": "STM32F411",
|
||||
"bootloader": "stm32-dfu",
|
||||
"board": "GENERIC_STM32_F411XE",
|
||||
"board": "BONSAI_C4",
|
||||
"pin_compatible": "promicro"
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -157,8 +157,6 @@ The Bonsai C4 only has one on-board LED (B2), and by default, both the Pro Micro
|
|||
#define B0 PAL_LINE(GPIOA, 9)
|
||||
```
|
||||
|
||||
No peripherals are enabled by default at this time, but example code to enable SPI, I2C, PWM, and Serial communications can be found [here](/keyboards/custommk/bonsai_c4_template).
|
||||
|
||||
## Elite-C
|
||||
|
||||
If a board currently supported in QMK uses an [Elite-C](https://keeb.io/products/elite-c-low-profile-version-usb-c-pro-micro-replacement-atmega32u4), the supported alternative controllers are:
|
||||
|
|
|
|||
|
|
@ -1,23 +0,0 @@
|
|||
/* Copyright 2022 customMK
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
// Set up SPI slave select pin
|
||||
void keyboard_post_init_kb(void) {
|
||||
#ifdef EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN
|
||||
setPinOutput(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN);
|
||||
writePinHigh(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN);
|
||||
#endif
|
||||
}
|
||||
|
|
@ -1,79 +0,0 @@
|
|||
/* Copyright 2022 customMK
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
// This file includes example #defines to enable commonly-used functionality
|
||||
// (SPI, PWM backlight, etc.) on specific pins. Capabilities you want to include
|
||||
// should be added to the config.h for your keyboard. Not all capabilities are
|
||||
// shown; for example:
|
||||
// I2C is not shown because the QMK defaults are sufficient for SCL on B6 and SDA on B7
|
||||
// Serial communications (for split keyboards) is not shown because QMK defaults work
|
||||
// for either pins A15 or B6
|
||||
|
||||
// If you need to change pins for PWM, SPI, I2C, or Serial communications, be aware that
|
||||
// doing this may require changing the driver, channel, PAL (Pin ALternate function) mode,
|
||||
// DMA stream, and/or DMA channel.
|
||||
|
||||
|
||||
// Bonsai C4 wires up pin A9 for Vbus sensing pin by default. For spilt keyboards, this
|
||||
// can be used to determine which half of the keyboard is plugged into USB.
|
||||
// For boards using Bonsai C4 merely as a reference design, the VBUS sense pin A9
|
||||
// can be used for purposes other than Vbus sensing (e.g. the switch
|
||||
// matrix).
|
||||
//
|
||||
// If A9 is needed for Vbus sensing, uncomment the line
|
||||
// below. Most keyboards using Bonsai C4 can leave the line below
|
||||
// commented out.
|
||||
//
|
||||
// #undef BOARD_OTG_NOVBUSSENS
|
||||
|
||||
// FRAM configuration
|
||||
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A0
|
||||
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // 96MHz / 8 = 12MHz; max supported by MB85R64 is 20MHz
|
||||
#define EXTERNAL_EEPROM_PAGE_SIZE 64 // does not matter for FRAM, just sets the RAM buffer size in STM32F chip
|
||||
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191
|
||||
|
||||
// External flash configuration
|
||||
#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B12
|
||||
#define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 1 // 96MHz; max supported by W25Q128JV is 133MHz
|
||||
#define EXTERNAL_FLASH_BYTE_COUNT (16 * 1024 * 1024) //128Mbit or 16MByte
|
||||
#define EXTERNAL_FLASH_PAGE_SIZE 256
|
||||
#define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200 seconds for flash chip erase
|
||||
|
||||
// SPI Configuration (needed for FRAM and FLASH)
|
||||
#define SPI_DRIVER SPID1
|
||||
#define SPI_SCK_PIN B3
|
||||
#define SPI_MOSI_PIN B5
|
||||
#define SPI_MISO_PIN B4
|
||||
|
||||
// Example code to set up PWM backlight on pin A6
|
||||
// If a different pin is used, a different PWM driver/channel settings may be necessary
|
||||
#define BACKLIGHT_PIN A6
|
||||
#define BACKLIGHT_PWM_DRIVER PWMD3
|
||||
#define BACKLIGHT_PWM_CHANNEL 1
|
||||
|
||||
// Example code for WS2812 underglow
|
||||
// Only pin A10 is wired to send 5V signals to the WS2812
|
||||
// This also usually requires adding special wiring during board assembly
|
||||
#define RGB_DI_PIN A10
|
||||
#define WS2812_PWM_DRIVER PWMD1
|
||||
#define WS2812_PWM_CHANNEL 3
|
||||
#define WS2812_PWM_PAL_MODE 1
|
||||
#define WS2812_DMA_STREAM STM32_DMA2_STREAM5
|
||||
#define WS2812_DMA_CHANNEL 6
|
||||
|
|
@ -1,35 +0,0 @@
|
|||
/* Copyright 2021 customMK
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// If you are using I2C (e.g. for OLED), include this line
|
||||
#define HAL_USE_I2C TRUE
|
||||
|
||||
// If you are using PWM (e.g. for WS2812, backlight, etc.) include this line
|
||||
#define HAL_USE_PWM TRUE
|
||||
|
||||
// If you are using serial comms for split communications, include these lines
|
||||
#define HAL_USE_SERIAL TRUE
|
||||
#define SERIAL_BUFFERS_SIZE 256
|
||||
|
||||
// If you are using SPI (e.g. for FRAM, flash, etc.) include these lines
|
||||
#define HAL_USE_SPI TRUE
|
||||
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
|
||||
// This enables interrupt-driven mode
|
||||
#define SPI_USE_WAIT TRUE
|
||||
|
||||
#include_next <halconf.h>
|
||||
|
|
@ -1,35 +0,0 @@
|
|||
/* Copyright 2022 customMK
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include_next <mcuconf.h>
|
||||
|
||||
// Used for underglow in example code
|
||||
#undef STM32_PWM_USE_TIM1 //timer 1 channel 3
|
||||
#define STM32_PWM_USE_TIM1 TRUE
|
||||
|
||||
// Used for backlight in examples
|
||||
#undef STM32_PWM_USE_TIM3 //timer 3 channel 1
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
|
||||
// Used for FRAM and flash in example code
|
||||
#undef STM32_SPI_USE_SPI1
|
||||
#define STM32_SPI_USE_SPI1 TRUE
|
||||
|
||||
// Used for Split comms in example code
|
||||
#undef STM32_SERIAL_USE_USART1
|
||||
#define STM32_SERIAL_USE_USART1 TRUE
|
||||
|
|
@ -1,10 +0,0 @@
|
|||
# Bonsai C4 template code
|
||||
|
||||
Currently, the converter for Pro Micro to Bonsai C4 only does pin mapping. This is sufficient for simple keyboards and also a good start for
|
||||
incorporating into more advanced keyboards with other features (like RGB, OLED, backlighting, split communiciations, etc.). However, to make
|
||||
use of the more advanced features--including using the FRAM and flash memory chip included on Bonsai C4--various peripheral hardware must
|
||||
be configured. Pro Micro does not requrie such configuration because such functionality is more limited and hard-wired to specific pins.
|
||||
|
||||
The code here provides examples that can be used to operate SPI, I2C, PWM, and Serial comms. In addition to using the converter, you will
|
||||
need to take code (as-needed) and add it to existing config.h files, or add in new halconf.h and mcuconf.h files. If you are changing which
|
||||
pins are used for certain functions, you should verify the new pins support that functionality, and check all assingments to ensure the correct settings are used (including as-applicable driver, channel, PAL (Pin ALternate function) mode, DMA stream, and/or DMA channel).
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
# List of all the board related files.
|
||||
BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F411RE
|
||||
|
||||
# Shared variables
|
||||
ALLCSRC += $(BOARDSRC)
|
||||
ALLINC += $(BOARDINC)
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
/* Copyright 2020 Nick Brassel (tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include_next "board.h"
|
||||
|
||||
#undef STM32_HSE_BYPASS
|
||||
|
|
@ -0,0 +1,92 @@
|
|||
/* Copyright 2022 David Hoelscher, customMK
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// Bonsai C4 includes Vbus sensing; derived designs that use PA9 for other purposes
|
||||
// may disable Vbus sensing with #define BOARD_OTG_NOVBUSSENS 1
|
||||
|
||||
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
|
||||
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||||
#endif
|
||||
|
||||
// FRAM configuration
|
||||
#ifndef EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN
|
||||
# define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOA, 0)
|
||||
# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 // 96MHz / 8 = 12MHz; max supported by MB85R64 is 20MHz
|
||||
# define EXTERNAL_EEPROM_BYTE_COUNT 8192
|
||||
# define EXTERNAL_EEPROM_PAGE_SIZE 64 // does not matter for FRAM, just sets the RAM buffer size in STM32F chip
|
||||
# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191
|
||||
#endif
|
||||
|
||||
// External flash configuration
|
||||
#ifndef EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN
|
||||
# define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN PAL_LINE(GPIOB, 12)
|
||||
# define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR 2 // 48MHz; max supported by W25Q128JV is 133MHz
|
||||
# define EXTERNAL_FLASH_BYTE_COUNT (16 * 1024 * 1024) //128Mbit or 16MByte
|
||||
# define EXTERNAL_FLASH_PAGE_SIZE 256
|
||||
# define EXTERNAL_FLASH_SPI_TIMEOUT 200000 //datasheet max is 200 seconds for flash chip erase
|
||||
#endif
|
||||
|
||||
// SPI Configuration (needed for FRAM and FLASH)
|
||||
#ifndef SPI_DRIVER
|
||||
# define SPI_DRIVER SPID1
|
||||
#endif
|
||||
#ifndef SPI_SCK_PIN
|
||||
# define SPI_SCK_PIN PAL_LINE(GPIOB, 3)
|
||||
#endif
|
||||
#ifndef SPI_MOSI_PIN
|
||||
# define SPI_MOSI_PIN PAL_LINE(GPIOB, 5)
|
||||
#endif
|
||||
#ifndef SPI_MISO_PIN
|
||||
# define SPI_MISO_PIN PAL_LINE(GPIOB, 4)
|
||||
#endif
|
||||
|
||||
|
||||
// I2C Configuration
|
||||
#ifdef CONVERT_TO_BONSAI_C4
|
||||
# ifndef I2C1_SCL_PIN
|
||||
# define I2C1_SCL_PIN PAL_LINE(GPIOB, 6)
|
||||
# endif
|
||||
# ifndef I2C1_SDA_PIN
|
||||
# define I2C1_SDA_PIN PAL_LINE(GPIOB, 9)
|
||||
# endif
|
||||
#endif
|
||||
|
||||
// WS2812-style LED control on pin A10
|
||||
#ifdef WS2812_DRIVER_PWM
|
||||
# ifndef RGB_DI_PIN
|
||||
# define RGB_DI_PIN PAL_LINE(GPIOA, 10)
|
||||
# endif
|
||||
# ifndef WS2812_PWM_DRIVER
|
||||
# define WS2812_PWM_DRIVER PWMD1
|
||||
# endif
|
||||
# ifndef WS2812_PWM_CHANNEL
|
||||
# define WS2812_PWM_CHANNEL 3
|
||||
# endif
|
||||
# ifndef WS2812_PWM_PAL_MODE
|
||||
# define WS2812_PWM_PAL_MODE 1
|
||||
# endif
|
||||
# ifndef WS2812_DMA_STREAM
|
||||
# define WS2812_DMA_STREAM STM32_DMA2_STREAM5
|
||||
# endif
|
||||
# ifndef WS2812_DMA_CHANNEL
|
||||
# define WS2812_DMA_CHANNEL 6
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifndef USB_VBUS_PIN
|
||||
# define USB_VBUS_PIN PAL_LINE(GPIOA, 9)
|
||||
#endif
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
/* Copyright 2022 David Hoelscher, customMK
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef HAL_USE_SPI
|
||||
# define HAL_USE_SPI TRUE
|
||||
#endif
|
||||
|
||||
#ifndef HAL_USE_I2C
|
||||
# define HAL_USE_I2C TRUE
|
||||
#endif
|
||||
|
||||
#ifdef SPLIT_KEYBOARD
|
||||
# ifndef HAL_USE_SERIAL
|
||||
# define HAL_USE_SERIAL TRUE
|
||||
# endif
|
||||
# ifndef SERIAL_BUFFERS_SIZE
|
||||
# define SERIAL_BUFFERS_SIZE 256
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifdef WS2812_DRIVER_PWM
|
||||
# ifndef HAL_USE_PWM
|
||||
# define HAL_USE_PWM TRUE
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifndef SPI_SELECT_MODE
|
||||
# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
|
||||
#endif
|
||||
|
||||
#ifndef SPI_USE_WAIT
|
||||
# define SPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
#include_next <halconf.h>
|
||||
|
|
@ -0,0 +1,249 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef MCUCONF_H
|
||||
#define MCUCONF_H
|
||||
|
||||
/*
|
||||
* STM32F4xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F4xx_MCUCONF
|
||||
#define STM32F411_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_BKPRAM_ENABLE FALSE
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_CLOCK48_REQUIRED TRUE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
||||
#define STM32_PLLM_VALUE 4
|
||||
#define STM32_PLLN_VALUE 96
|
||||
#define STM32_PLLP_VALUE 2
|
||||
#define STM32_PLLQ_VALUE 4
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV1
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
#define STM32_RTCPRE_VALUE 8
|
||||
#define STM32_MCO1SEL STM32_MCO1SEL_HSI
|
||||
#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
|
||||
#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
|
||||
#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
|
||||
#define STM32_I2SSRC STM32_I2SSRC_CKIN
|
||||
#define STM32_PLLI2SN_VALUE 192
|
||||
#define STM32_PLLI2SR_VALUE 5
|
||||
|
||||
/*
|
||||
* IRQ system settings.
|
||||
*/
|
||||
#define STM32_IRQ_EXTI0_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI1_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI2_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI3_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI4_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI5_9_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI10_15_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI16_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI17_PRIORITY 15
|
||||
#define STM32_IRQ_EXTI18_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI19_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI20_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI21_PRIORITY 15
|
||||
#define STM32_IRQ_EXTI22_PRIORITY 15
|
||||
|
||||
#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_CC_PRIORITY 7
|
||||
#define STM32_IRQ_TIM2_PRIORITY 7
|
||||
#define STM32_IRQ_TIM3_PRIORITY 7
|
||||
#define STM32_IRQ_TIM4_PRIORITY 7
|
||||
#define STM32_IRQ_TIM5_PRIORITY 7
|
||||
|
||||
#define STM32_IRQ_USART1_PRIORITY 12
|
||||
#define STM32_IRQ_USART2_PRIORITY 12
|
||||
#define STM32_IRQ_USART6_PRIORITY 12
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 6
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM5 FALSE
|
||||
#define STM32_GPT_USE_TIM9 FALSE
|
||||
#define STM32_GPT_USE_TIM10 FALSE
|
||||
#define STM32_GPT_USE_TIM11 FALSE
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_USE_I2C3 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C3_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C3_DMA_PRIORITY 3
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* I2S driver system settings.
|
||||
*/
|
||||
#define STM32_I2S_USE_SPI2 FALSE
|
||||
#define STM32_I2S_USE_SPI3 FALSE
|
||||
#define STM32_I2S_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_I2S_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_I2S_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_I2S_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||||
#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM5 FALSE
|
||||
#define STM32_ICU_USE_TIM9 FALSE
|
||||
#define STM32_ICU_USE_TIM10 FALSE
|
||||
#define STM32_ICU_USE_TIM11 FALSE
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_TIM1 TRUE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM5 FALSE
|
||||
#define STM32_PWM_USE_TIM9 FALSE
|
||||
#define STM32_PWM_USE_TIM10 FALSE
|
||||
#define STM32_PWM_USE_TIM11 FALSE
|
||||
|
||||
/*
|
||||
* RTC driver system settings.
|
||||
*/
|
||||
#define STM32_RTC_PRESA_VALUE 32
|
||||
#define STM32_RTC_PRESS_VALUE 1024
|
||||
#define STM32_RTC_CR_INIT 0
|
||||
#define STM32_RTC_TAMPCR_INIT 0
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 TRUE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART6 FALSE
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 TRUE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
|
||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART6 FALSE
|
||||
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
|
||||
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
|
||||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
|
||||
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART6_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_OTG1 TRUE
|
||||
#define STM32_USB_OTG1_IRQ_PRIORITY 14
|
||||
#define STM32_USB_OTG1_RX_FIFO_SIZE 512
|
||||
#define STM32_USB_HOST_WAKEUP_DURATION 2
|
||||
|
||||
/*
|
||||
* WDG driver system settings.
|
||||
*/
|
||||
#define STM32_WDG_USE_IWDG FALSE
|
||||
|
||||
#endif /* MCUCONF_H */
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# Proton C MCU settings for converting AVR projects
|
||||
MCU := STM32F411
|
||||
BOARD := GENERIC_STM32_F411XE
|
||||
BOOTLOADER := stm32-dfu
|
||||
BOARD := BONSAI_C4
|
||||
BOOTLOADER := stm32-dfu
|
||||
|
|
|
|||
|
|
@ -0,0 +1,5 @@
|
|||
BACKLIGHT_DRIVER ?= pwm
|
||||
WS2812_DRIVER ?= pwm
|
||||
SERIAL_DRIVER ?= usart
|
||||
FLASH_DRIVER ?= spi
|
||||
EEPROM_DRIVER ?= spi
|
||||
Loading…
Reference in New Issue