Add SPI master for ChibiOS/ARM. (#8779)
This commit is contained in:
Nick Brassel
GitHub
parent
5b4870c046
commit
b17482c3fd
|
|
@ -18,7 +18,24 @@ You may use more than one slave select pin, not just the `SS` pin. This is usefu
|
|||
|
||||
## ChibiOS/ARM Configuration
|
||||
|
||||
ARM support for this driver is not ready yet. Check back later!
|
||||
You'll need to determine which pins can be used for SPI -- as an example, STM32 parts generally have multiple SPI peripherals, labeled SPI1, SPI2, SPI3 etc.
|
||||
|
||||
To enable SPI, modify your board's `halconf.h` to enable SPI - both `HAL_USE_SPI` and `SPI_USE_WAIT` should be `TRUE`, and `SPI_SELECT_MODE` should be `SPI_SELECT_MODE_PAD`.
|
||||
Then, modify your board's `mcuconf.h` to enable the SPI peripheral you've chosen -- in the case of using SPI2, modify `STM32_SPI_USE_SPI2` to be `TRUE`.
|
||||
|
||||
As per the AVR configuration, you may select any other standard GPIO as a slave select pin, and can be supplied to `spi_start()`.
|
||||
|
||||
Configuration-wise, you'll need to set up the peripheral as per your MCU's datasheet -- the defaults match the pins for a Proton-C, i.e. STM32F303.
|
||||
|
||||
`config.h` override | Description | Default Value
|
||||
----------------------------|---------------------------------------------------------------|--------------
|
||||
`#define SPI_DRIVER` | SPI peripheral to use - SPI1 => `SPID1`, SPI2 => `SPID2` etc. | `SPID2`
|
||||
`#define SPI_SCK_PIN` | The pin to use for the SCK | `B13`
|
||||
`#define SPI_SCK_PAL_MODE` | The alternate function mode for the SCK pin | `5`
|
||||
`#define SPI_MOSI_PIN` | The pin to use for the MOSI | `B15`
|
||||
`#define SPI_MOSI_PAL_MODE` | The alternate function mode for the MOSI pin | `5`
|
||||
`#define SPI_MISO_PIN` | The pin to use for the MISO | `B14`
|
||||
`#define SPI_MISO_PAL_MODE` | The alternate function mode for the MISO pin | `5`
|
||||
|
||||
## Functions
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,137 @@
|
|||
/* Copyright 2020 Nick Brassel (tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "spi_master.h"
|
||||
#include "quantum.h"
|
||||
#include "timer.h"
|
||||
|
||||
static pin_t currentSlavePin = NO_PIN;
|
||||
static SPIConfig spiConfig = {false, NULL, 0, 0, 0, 0};
|
||||
|
||||
__attribute__((weak)) void spi_init(void) {
|
||||
// Try releasing special pins for a short time
|
||||
palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_INPUT);
|
||||
palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_INPUT);
|
||||
palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_INPUT);
|
||||
|
||||
chThdSleepMilliseconds(10);
|
||||
#if defined(USE_GPIOV1)
|
||||
palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL);
|
||||
palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL);
|
||||
palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL);
|
||||
#else
|
||||
palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST);
|
||||
#endif
|
||||
}
|
||||
|
||||
bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) {
|
||||
if (currentSlavePin != NO_PIN || slavePin == NO_PIN) {
|
||||
return false;
|
||||
}
|
||||
|
||||
uint16_t roundedDivisor = 2;
|
||||
while (roundedDivisor < divisor) {
|
||||
roundedDivisor <<= 1;
|
||||
}
|
||||
|
||||
if (roundedDivisor < 2 || roundedDivisor > 256) {
|
||||
return false;
|
||||
}
|
||||
|
||||
spiConfig.cr1 = 0;
|
||||
|
||||
if (lsbFirst) {
|
||||
spiConfig.cr1 |= SPI_CR1_LSBFIRST;
|
||||
}
|
||||
|
||||
switch (mode) {
|
||||
case 0:
|
||||
break;
|
||||
case 1:
|
||||
spiConfig.cr1 |= SPI_CR1_CPHA;
|
||||
break;
|
||||
case 2:
|
||||
spiConfig.cr1 |= SPI_CR1_CPOL;
|
||||
break;
|
||||
case 3:
|
||||
spiConfig.cr1 |= SPI_CR1_CPHA | SPI_CR1_CPOL;
|
||||
break;
|
||||
}
|
||||
|
||||
switch (roundedDivisor) {
|
||||
case 2:
|
||||
break;
|
||||
case 4:
|
||||
spiConfig.cr1 |= SPI_CR1_BR_0;
|
||||
break;
|
||||
case 8:
|
||||
spiConfig.cr1 |= SPI_CR1_BR_1;
|
||||
break;
|
||||
case 16:
|
||||
spiConfig.cr1 |= SPI_CR1_BR_1 | SPI_CR1_BR_0;
|
||||
break;
|
||||
case 32:
|
||||
spiConfig.cr1 |= SPI_CR1_BR_2;
|
||||
break;
|
||||
case 64:
|
||||
spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_0;
|
||||
break;
|
||||
case 128:
|
||||
spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_1;
|
||||
break;
|
||||
case 256:
|
||||
spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0;
|
||||
break;
|
||||
}
|
||||
|
||||
currentSlavePin = slavePin;
|
||||
spiConfig.ssport = PAL_PORT(slavePin);
|
||||
spiConfig.sspad = PAL_PAD(slavePin);
|
||||
|
||||
setPinOutput(slavePin);
|
||||
spiStart(&SPI_DRIVER, &spiConfig);
|
||||
spiSelect(&SPI_DRIVER);
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
spi_status_t spi_write(uint8_t data) { return spi_transmit(&data, 1); }
|
||||
|
||||
spi_status_t spi_read(void) {
|
||||
uint8_t data = 0;
|
||||
spi_receive(&data, 1);
|
||||
return data;
|
||||
}
|
||||
|
||||
spi_status_t spi_transmit(const uint8_t *data, uint16_t length) {
|
||||
spiSend(&SPI_DRIVER, length, data);
|
||||
return SPI_STATUS_SUCCESS;
|
||||
}
|
||||
|
||||
spi_status_t spi_receive(uint8_t *data, uint16_t length) {
|
||||
spiReceive(&SPI_DRIVER, length, data);
|
||||
return SPI_STATUS_SUCCESS;
|
||||
}
|
||||
|
||||
void spi_stop(void) {
|
||||
if (currentSlavePin != NO_PIN) {
|
||||
spiUnselect(&SPI_DRIVER);
|
||||
spiStop(&SPI_DRIVER);
|
||||
currentSlavePin = NO_PIN;
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,78 @@
|
|||
/* Copyright 2020 Nick Brassel (tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include <ch.h>
|
||||
#include <hal.h>
|
||||
#include <quantum.h>
|
||||
|
||||
#ifndef SPI_DRIVER
|
||||
# define SPI_DRIVER SPID2
|
||||
#endif
|
||||
|
||||
#ifndef SPI_SCK_PIN
|
||||
# define SPI_SCK_PIN B13
|
||||
#endif
|
||||
|
||||
#ifndef SPI_SCK_PAL_MODE
|
||||
# define SPI_SCK_PAL_MODE 5
|
||||
#endif
|
||||
|
||||
#ifndef SPI_MOSI_PIN
|
||||
# define SPI_MOSI_PIN B15
|
||||
#endif
|
||||
|
||||
#ifndef SPI_MOSI_PAL_MODE
|
||||
# define SPI_MOSI_PAL_MODE 5
|
||||
#endif
|
||||
|
||||
#ifndef SPI_MISO_PIN
|
||||
# define SPI_MISO_PIN B14
|
||||
#endif
|
||||
|
||||
#ifndef SPI_MISO_PAL_MODE
|
||||
# define SPI_MISO_PAL_MODE 5
|
||||
#endif
|
||||
|
||||
typedef int16_t spi_status_t;
|
||||
|
||||
#define SPI_STATUS_SUCCESS (0)
|
||||
#define SPI_STATUS_ERROR (-1)
|
||||
#define SPI_STATUS_TIMEOUT (-2)
|
||||
|
||||
#define SPI_TIMEOUT_IMMEDIATE (0)
|
||||
#define SPI_TIMEOUT_INFINITE (0xFFFF)
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void spi_init(void);
|
||||
|
||||
bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor);
|
||||
|
||||
spi_status_t spi_write(uint8_t data);
|
||||
|
||||
spi_status_t spi_read(void);
|
||||
|
||||
spi_status_t spi_transmit(const uint8_t *data, uint16_t length);
|
||||
|
||||
spi_status_t spi_receive(uint8_t *data, uint16_t length);
|
||||
|
||||
void spi_stop(void);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
|
@ -156,7 +156,7 @@
|
|||
* @brief Enables the SPI subsystem.
|
||||
*/
|
||||
# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
|
||||
# define HAL_USE_SPI FALSE
|
||||
# define HAL_USE_SPI TRUE
|
||||
# endif
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -227,7 +227,7 @@
|
|||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_USE_SPI2 TRUE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
|
|
|
|||
Loading…
Reference in New Issue