drivers: remove direct `quantum.h` includes (#21473)

drivers/led/apa102.c

@@ -16,7 +16,7 @@
  */
 
 #include "apa102.h"
-#include "quantum.h"
+#include "gpio.h"
 
 #ifndef APA102_NOPS
 #    if defined(__AVR__)

drivers/sensors/pmw33xx_common.h

@@ -10,7 +10,7 @@
 
 #pragma once
 
-#include "quantum.h" //to get is_keyboard_left
+#include "keyboard.h"
 #include <stdint.h>
 #include "spi_master.h"
 #include "util.h"

platforms/chibios/bootloaders/rp2040.c

@@ -1,9 +1,10 @@
 // Copyright 2022 Stefan Kerkmann
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-#include "quantum.h"
 #include "hal.h"
 #include "bootloader.h"
+#include "gpio.h"
+#include "wait.h"
 #include "pico/bootrom.h"
 
 #if !defined(RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED)

platforms/chibios/drivers/i2c_master.c

@@ -24,8 +24,10 @@
  * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
  * but using any other I2C pins should be trivial.
  */
-#include "quantum.h"
+
 #include "i2c_master.h"
+#include "gpio.h"
+#include "chibios_config.h"
 #include <string.h>
 #include <ch.h>
 #include <hal.h>

platforms/chibios/drivers/serial.c

@@ -2,8 +2,8 @@
  * WARNING: be careful changing this code, it is very timing dependent
  */
 
-#include "quantum.h"
 #include "serial.h"
+#include "gpio.h"
 #include "wait.h"
 #include "synchronization_util.h"
 

platforms/chibios/drivers/serial_protocol.c

@@ -3,10 +3,8 @@
 
 #include <ch.h>
 
-#include "quantum.h"
 #include "serial.h"
 #include "serial_protocol.h"
-#include "printf.h"
 #include "synchronization_util.h"
 
 static inline bool initiate_transaction(uint8_t transaction_id);

platforms/chibios/drivers/serial_usart.c

@@ -5,6 +5,7 @@
 #include "serial_usart.h"
 #include "serial_protocol.h"
 #include "synchronization_util.h"
+#include "chibios_config.h"
 
 #if defined(SERIAL_USART_CONFIG)
 static QMKSerialConfig serial_config = SERIAL_USART_CONFIG;

platforms/chibios/drivers/serial_usart.h

@@ -3,7 +3,6 @@
 
 #pragma once
 
-#include "quantum.h"
 #include "serial.h"
 #include <hal.h>
 

platforms/chibios/drivers/uart.c

@@ -16,8 +16,6 @@
 
 #include "uart.h"
 
-#include "quantum.h"
-
 #if defined(MCU_KINETIS)
 static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE};
 #elif defined(WB32F3G71xx) || defined(WB32FQ95xx)

platforms/chibios/drivers/uart.h

@@ -17,6 +17,7 @@
 #pragma once
 
 #include <stdint.h>
+#include <stdbool.h>
 
 #include <hal.h>
 

platforms/chibios/drivers/vendor/RP/RP2040/ps2_vendor.c

@@ -1,12 +1,10 @@
 // Copyright 2022 Marek Kraus (@gamelaster)
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-#include "quantum.h"
-
 #include "hardware/pio.h"
 #include "hardware/clocks.h"
 #include "ps2.h"
-#include "print.h"
+#include "debug.h"
 
 #if !defined(MCU_RP)
 #    error PIO Driver is only available for Raspberry Pi 2040 MCUs!

platforms/chibios/drivers/vendor/RP/RP2040/serial_vendor.c

@@ -1,11 +1,12 @@
 // Copyright 2022 Stefan Kerkmann
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-#include "quantum.h"
 #include "serial_usart.h"
 #include "serial_protocol.h"
 #include "hardware/pio.h"
 #include "hardware/clocks.h"
+#include "wait.h"
+#include "debug.h"
 
 #if !defined(MCU_RP)
 #    error PIO Driver is only available for Raspberry Pi 2040 MCUs!

platforms/chibios/drivers/vendor/RP/RP2040/ws2812_vendor.c

@@ -2,13 +2,19 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
 #include "ws2812.h"
-#include "hardware/timer.h"
+
-#include "hardware/clocks.h"
 // Keep this exact include order otherwise we run into naming conflicts between
 // pico-sdk and rp2040.h which we don't control.
-#include "quantum.h"
+#include "hardware/timer.h"
+#include "hardware/clocks.h"
+#include <hal.h>
 #include "hardware/pio.h"
 
+#include "gpio.h"
+#include "debug.h"
+#include "wait.h"
+#include "util.h"
+
 #if !defined(MCU_RP)
 #    error PIO Driver is only available for Raspberry Pi 2040 MCUs!
 #endif

platforms/chibios/drivers/ws2812_bitbang.c

@@ -1,7 +1,7 @@
-#include "quantum.h"
 #include "ws2812.h"
-#include <ch.h>
+
-#include <hal.h>
+#include "gpio.h"
+#include "chibios_config.h"
 
 /* Adapted from https://github.com/bigjosh/SimpleNeoPixelDemo/ */
 

platforms/chibios/drivers/ws2812_pwm.c

@@ -1,6 +1,6 @@
 #include "ws2812.h"
-#include "quantum.h"
+#include "gpio.h"
-#include <hal.h>
+#include "chibios_config.h"
 
 /* Adapted from https://github.com/joewa/WS2812-LED-Driver_ChibiOS/ */
 

platforms/chibios/drivers/ws2812_spi.c

@@ -1,5 +1,7 @@
-#include "quantum.h"
 #include "ws2812.h"
+#include "gpio.h"
+#include "util.h"
+#include "chibios_config.h"
 
 /* Adapted from https://github.com/gamazeps/ws2812b-chibios-SPIDMA/ */