Add support for DMAMUX-capable MCU configuration with WS2812 PWM driver. (#9471)
This commit is contained in:
parent
8a4a0c25fd
commit
c6b7a0d386
|
@ -92,6 +92,7 @@ Configure the hardware via your config.h:
|
||||||
#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
|
#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
|
||||||
#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
||||||
#define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
#define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
||||||
|
#define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
|
||||||
```
|
```
|
||||||
|
|
||||||
You must also turn on the PWM feature in your halconf.h and mcuconf.h
|
You must also turn on the PWM feature in your halconf.h and mcuconf.h
|
||||||
|
@ -117,5 +118,5 @@ Note: This only applies to STM32 boards.
|
||||||
|
|
||||||
To configure the `RGB_DI_PIN` to open drain configuration add this to your config.h file:
|
To configure the `RGB_DI_PIN` to open drain configuration add this to your config.h file:
|
||||||
```c
|
```c
|
||||||
#define WS2812_EXTERNAL_PULLUP
|
#define WS2812_EXTERNAL_PULLUP
|
||||||
```
|
```
|
||||||
|
|
|
@ -23,6 +23,9 @@
|
||||||
#ifndef WS2812_DMA_CHANNEL
|
#ifndef WS2812_DMA_CHANNEL
|
||||||
# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP
|
# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP
|
||||||
#endif
|
#endif
|
||||||
|
#if (STM32_DMA_SUPPORTS_DMAMUX == TRUE) && !defined(WS2812_DMAMUX_ID)
|
||||||
|
# error "please consult your MCU's datasheet and specify in your config.h: #define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM?_UP"
|
||||||
|
#endif
|
||||||
|
|
||||||
// Push Pull or Open Drain Configuration
|
// Push Pull or Open Drain Configuration
|
||||||
// Default Push Pull
|
// Default Push Pull
|
||||||
|
@ -184,6 +187,11 @@ void ws2812_init(void) {
|
||||||
dmaStreamSetMode(WS2812_DMA_STREAM, STM32_DMA_CR_CHSEL(WS2812_DMA_CHANNEL) | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_MINC | STM32_DMA_CR_CIRC | STM32_DMA_CR_PL(3));
|
dmaStreamSetMode(WS2812_DMA_STREAM, STM32_DMA_CR_CHSEL(WS2812_DMA_CHANNEL) | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_MINC | STM32_DMA_CR_CIRC | STM32_DMA_CR_PL(3));
|
||||||
// M2P: Memory 2 Periph; PL: Priority Level
|
// M2P: Memory 2 Periph; PL: Priority Level
|
||||||
|
|
||||||
|
#if (STM32_DMA_SUPPORTS_DMAMUX == TRUE)
|
||||||
|
// If the MCU has a DMAMUX we need to assign the correct resource
|
||||||
|
dmaSetRequestSource(WS2812_DMA_STREAM, WS2812_DMAMUX_ID);
|
||||||
|
#endif
|
||||||
|
|
||||||
// Start DMA
|
// Start DMA
|
||||||
dmaStreamEnable(WS2812_DMA_STREAM);
|
dmaStreamEnable(WS2812_DMA_STREAM);
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue