Move RGBLight code into its own folder (#13312)

common_features.mk

@@ -196,10 +196,11 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     ifeq ($(filter $(RGBLIGHT_DRIVER),$(VALID_RGBLIGHT_TYPES)),)
         $(error RGBLIGHT_DRIVER="$(RGBLIGHT_DRIVER)" is not a valid RGB type)
     else
-        POST_CONFIG_H += $(QUANTUM_DIR)/rgblight_post_config.h
+        COMMON_VPATH += $(QUANTUM_DIR)/rgblight
+        POST_CONFIG_H += $(QUANTUM_DIR)/rgblight/rgblight_post_config.h
         OPT_DEFS += -DRGBLIGHT_ENABLE
         SRC += $(QUANTUM_DIR)/color.c
-        SRC += $(QUANTUM_DIR)/rgblight.c
+        SRC += $(QUANTUM_DIR)/rgblight/rgblight.c
         CIE1931_CURVE := yes
         RGB_KEYCODES_ENABLE := yes
     endif

docs/cli_commands.md

@@ -368,7 +368,7 @@ qmk generate-docs
 
 ## `qmk generate-rgb-breathe-table`
 
-This command generates a lookup table (LUT) header file for the [RGB Lighting](feature_rgblight.md) feature's breathing animation. Place this file in your keyboard or keymap directory as `rgblight_breathe_table.h` to override the default LUT in `quantum/`.
+This command generates a lookup table (LUT) header file for the [RGB Lighting](feature_rgblight.md) feature's breathing animation. Place this file in your keyboard or keymap directory as `rgblight_breathe_table.h` to override the default LUT in `quantum/rgblight/`.
 
 **Usage**:
 

docs/feature_rgblight.md

@@ -119,7 +119,7 @@ if `RGBLIGHT_EFFECT_xxxx` or `RGBLIGHT_ANIMATIONS` is defined, you also have a n
 
 Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstration.
 
-Note: For versions older than 0.6.117, The mode numbers were written directly. In `quantum/rgblight.h` there is a contrast table between the old mode number and the current symbol.
+Note: For versions older than 0.6.117, The mode numbers were written directly. In `quantum/rgblight/rgblight.h` there is a contrast table between the old mode number and the current symbol.
 
 ### Effect and Animation Toggles
 
@@ -328,7 +328,7 @@ Normally lighting layers are not shown when RGB Lighting is disabled (e.g. with
 
 ## Functions
 
-If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include:
+If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight/rgblight.h) for the full list, but the most commonly used functions include:
 
 ### Utility Functions
 |Function                                    |Description                                                        |

keyboards/mxss/rules.mk

@@ -2,39 +2,31 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no        # Console for debug
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
 
 SRC += mxss_frontled.c
 
 # Remove the common RGB light code and use my iteration instead
+COMMON_VPATH += $(QUANTUM_DIR)/rgblight
 OPT_DEFS += -DRGBLIGHT_ENABLE
-SRC += $(QUANTUM_DIR)/process_keycode/process_rgb.c
 SRC += rgblight.c
-SRC += color.c
-SRC += ws2812.c
+SRC += $(QUANTUM_DIR)/color.c
+WS2812_DRIVER_REQUIRED = yes
 CIE1931_CURVE = yes
+RGB_KEYCODES_ENABLE = yes

quantum/rgblight/rgblight.c

@@ -890,7 +890,7 @@ void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom) {
         animation_status.restart = true;
     }
 #        endif /* RGBLIGHT_SPLIT_NO_ANIMATION_SYNC */
-#    endif /* RGBLIGHT_USE_TIMER */
+#    endif     /* RGBLIGHT_USE_TIMER */
 }
 #endif /* RGBLIGHT_SPLIT */