[Keymap] Drashna update for post Q2 merge (#17241)

keyboards/40percentclub/nano/keymaps/drashna/keymap.c

@@ -23,8 +23,8 @@
 // clang-format off
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_QWERTY] = LAYOUT(
-     KC_VOLU, KC_MPLY, KC_MPRV, RESET,
+     KC_VOLU, KC_MPLY, KC_MPRV, QK_BOOT,
-     KC_VOLD, KC_MUTE, KC_MNXT, RESET
+     KC_VOLD, KC_MUTE, KC_MNXT, QK_BOOT
   ),
 
 };

keyboards/bastardkb/charybdis/3x5/keymaps/drashna/chconf.h

@@ -1,38 +0,0 @@
-/* Copyright 2020 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/*
- * This file was auto-generated by:
- *    `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f411/chconf.h -r platforms/chibios/common/configs/chconf.h`
- */
-
-#pragma once
-
-#define CH_CFG_ST_FREQUENCY 10000
-
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
-
-#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
-
-#define CH_CFG_FACTORY_SEMAPHORES TRUE
-
-#define CH_CFG_FACTORY_MAILBOXES TRUE
-
-#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
-
-#define CH_CFG_FACTORY_PIPES TRUE
-
-#include_next <chconf.h>

keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h

@@ -71,6 +71,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
 #define SERIAL_USART_RX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
 #define SERIAL_USART_TIMEOUT     100  // USART driver timeout. default 100
+#define SERIAL_USART_SPEED       921600
 // #define SERIAL_USART_PIN_SWAP // swap RX and TX pins on master
 // To use the highest possible baudrate (3.75Mbit/s) uncomment the following
 // line, this can result in dropped communications so lower the speed if there
@@ -102,7 +103,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PMW3360_SPI_MODE                     3
 #define PMW3360_SPI_DIVISOR                  64
 
-
 #define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200
 #define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400
 #define CHARYBDIS_MINIMUM_SNIPING_DPI 200

keyboards/bastardkb/charybdis/3x5/keymaps/drashna/keymap.c

@@ -73,13 +73,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _________________RAISE_L1__________________,    _________________RAISE_R1__________________,
         _________________RAISE_L2__________________,    _________________RAISE_R2__________________,
         _________________RAISE_L3__________________,    _________________RAISE_R3__________________,
-                          REBOOT,  KEYLOCK, _______,    _______, _______
+                          QK_RBT,  _______, _______,    _______, _______
     ),
     [_ADJUST] = LAYOUT_charybdis_3x5_wrapper(
         _________________ADJUST_L1_________________,    _________________ADJUST_R1_________________,
         _________________ADJUST_L2_________________,    _________________ADJUST_R2_________________,
         _________________ADJUST_L3_________________,    _________________ADJUST_R3_________________,
-                          EEP_RST, KC_NUKE, _______,    _______, RESET
+                          EE_CLR, KC_NUKE, _______,    _______, QK_BOOT
     ),
 };
 
@@ -98,3 +98,9 @@ bool usb_vbus_state(void) {
     return readPin(USB_VBUS_PIN);
 }
 #endif
+
+void matrix_output_unselect_delay(uint8_t line, bool key_pressed) {
+    for (int32_t i = 0; i < 40; i++) {
+        __asm__ volatile("nop" ::: "memory");
+    }
+}

keyboards/bastardkb/charybdis/4x6/keymaps/drashna/chconf.h

@@ -1,38 +0,0 @@
-/* Copyright 2020 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/*
- * This file was auto-generated by:
- *    `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f411/chconf.h -r platforms/chibios/common/configs/chconf.h`
- */
-
-#pragma once
-
-#define CH_CFG_ST_FREQUENCY 10000
-
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
-
-#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
-
-#define CH_CFG_FACTORY_SEMAPHORES TRUE
-
-#define CH_CFG_FACTORY_MAILBOXES TRUE
-
-#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
-
-#define CH_CFG_FACTORY_PIPES TRUE
-
-#include_next <chconf.h>

keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h

@@ -59,6 +59,7 @@
 // // line, this can result in dropped communications so lower the speed if there
 // // are many timeouts.
 // // #define SERIAL_USART_SPEED (STM32_PCLK2 >> 4)
+#define SERIAL_USART_SPEED       921600
 
 #define CRC8_USE_TABLE
 #define CRC8_OPTIMIZE_SPEED

keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c

@@ -109,8 +109,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______, _________________RAISE_L3__________________,    _________________RAISE_R3__________________, _______,
                                    _______, _______, _______,    _______, _______,
                                            _______, _______,      _______
-  )
+    ),
 
+    [_ADJUST] = LAYOUT_charybdis_4x6_wrapper(
+        QK_MAKE, KC_WIDE,KC_AUSSIE,KC_SCRIPT,KC_ZALGO,KC_NOMODE, KC_NOMODE,KC_BLOCKS,KC_REGIONAL,_______,_______, QK_BOOT,
+        VRSN,    _________________ADJUST_L1_________________,    _________________ADJUST_R1_________________, EE_CLR,
+        KEYLOCK, _________________ADJUST_L2_________________,    _________________ADJUST_R2_________________, TG_MODS,
+        UC_MOD,  _________________ADJUST_L3_________________,    _________________ADJUST_R3_________________, KC_MPLY,
+                                   QK_RBT, AUTO_CTN, _______,    KC_NUKE, _______,
+                                           _______, _______,      _______
+    )
 };
 // clang-format on
 
@@ -130,3 +138,9 @@ bool usb_vbus_state(void) {
     return readPin(USB_VBUS_PIN);
 }
 #endif
+
+void matrix_output_unselect_delay(uint8_t line, bool key_pressed) {
+    for (int32_t i = 0; i < 40; i++) {
+        __asm__ volatile("nop" ::: "memory");
+    }
+}

keyboards/gboards/gergo/keymaps/drashna/keymap.c

@@ -78,8 +78,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         ),
 
     [_ADJUST] = LAYOUT_gergo_wrapper(
-        KC_MAKE, _________________ADJUST_L1_________________,                                           _________________ADJUST_R1_________________, KC_RESET,
+        QK_MAKE, _________________ADJUST_L1_________________,                                           _________________ADJUST_R1_________________, QK_BOOT,
-        VRSN,    _________________ADJUST_L2_________________, _______,                         KC_NUKE, _________________ADJUST_R2_________________, EEP_RST,
+        VRSN,    _________________ADJUST_L2_________________, _______,                         KC_NUKE, _________________ADJUST_R2_________________, EE_CLR,
         _______, _________________ADJUST_L3_________________, _______, _______,       _______, _______, _________________ADJUST_R3_________________, TG_MODS,
                                             _______, _______, _______, _______,       _______, _______, _______, _______
         ),

keyboards/handwired/tractyl_manuform/4x6_right/keymaps/drashna/keymap.c

@@ -105,8 +105,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                      _______, _______,    _______, _______
     ),
     [_ADJUST] = LAYOUT_4x6_right_wrapper(
-        KC_MAKE, _________________ADJUST_L1_________________,                      _________________ADJUST_R1_________________, KC_RST,
+        QK_MAKE, _________________ADJUST_L1_________________,                      _________________ADJUST_R1_________________, QK_BOOT,
-        VRSN,    _________________ADJUST_L2_________________,                      _________________ADJUST_R2_________________, EEP_RST,
+        VRSN,    _________________ADJUST_L2_________________,                      _________________ADJUST_R2_________________, EE_CLR,
         UC_MOD,  _________________ADJUST_L3_________________,                      _________________ADJUST_R3_________________, TG_MODS,
                           HPT_DWLI, HPT_DWLD,                                                        TG_GAME, TG_DBLO,
                                             HPT_TOG, HPT_BUZ,                               KC_NUKE,

keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h

@@ -68,7 +68,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SERIAL_USART_TX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
 #define SERIAL_USART_RX_PAL_MODE 7    // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
 #define SERIAL_USART_TIMEOUT     100  // USART driver timeout. default 100
-
+#define SERIAL_USART_SPEED       921600
 
 #define CRC8_USE_TABLE
 #define CRC8_OPTIMIZE_SPEED

keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c

@@ -58,3 +58,9 @@ bool usb_vbus_state(void) {
     return readPin(USB_VBUS_PIN);
 }
 #endif
+
+void matrix_output_unselect_delay(uint8_t line, bool key_pressed) {
+    for (int32_t i = 0; i < 40; i++) {
+        __asm__ volatile("nop" ::: "memory");
+    }
+}

keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h

@@ -17,7 +17,6 @@
 #pragma once
 
 #define DEBOUNCE 45
-#define ENCODER_DEFAULT_POS 0x3
 
 #ifdef OLED_DRIVER_SH1107
 #    undef OLED_DISPLAY_128X64
@@ -27,3 +26,10 @@
 #define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 200
 #define CHARYBDIS_MINIMUM_SNIPING_DPI 400
 #define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 200
+
+#define ENCODER_DEFAULT_POS 0x3
+
+#define SECURE_UNLOCK_SEQUENCE \
+    {                          \
+        { 2, 1 }, { 2, 2 }, { 2, 3 }, { 2, 4 } \
+    }

keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c

@@ -120,25 +120,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                      _______, _______,      _______, _______
     ),
     [_ADJUST] = LAYOUT_5x6_right_wrapper(
-        KC_MAKE, KC_WIDE,KC_AUSSIE,KC_SCRIPT,KC_ZALGO,KC_NOMODE,                 KC_NOMODE,KC_BLOCKS,KC_REGIONAL,_______,_______, KC_RST,
+        QK_MAKE, KC_WIDE,KC_AUSSIE,KC_SCRIPT,KC_ZALGO,KC_NOMODE,                 KC_NOMODE,KC_BLOCKS,KC_REGIONAL,_______,_______, QK_BOOT,
-        VRSN,    _________________ADJUST_L1_________________,                        _________________ADJUST_R1_________________, EEP_RST,
+        VRSN,    _________________ADJUST_L1_________________,                        _________________ADJUST_R1_________________, EE_CLR,
         KEYLOCK, _________________ADJUST_L2_________________,                        _________________ADJUST_R2_________________, TG_MODS,
         UC_MOD,  _________________ADJUST_L3_________________,                        _________________ADJUST_R3_________________, KC_MPLY,
                    TG(_DIABLOII), AUTO_CTN,                                                            TG_GAME, TG_DBLO,
-                                            _______, REBOOT,                                  KC_NUKE,
+                                            _______, QK_RBT,                                  KC_NUKE,
                                                      _______, _______,               _______,
                                                      _______, _______,      KC_NUKE, _______
     ),
 };
 
-#define BASE_ENCODERS { { KC_VOLD, KC_VOLU }, { KC_WH_D, KC_WH_U } }
 
 #ifdef ENCODER_MAP_ENABLE
 const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
-    [_DEFAULT_LAYER_1] = BASE_ENCODERS,
+    [_DEFAULT_LAYER_1] = { { KC_VOLD, KC_VOLU }, { KC_WH_D, KC_WH_U } },
-    [_DEFAULT_LAYER_2] = BASE_ENCODERS,
+    [_DEFAULT_LAYER_2] = { { _______, _______ }, { _______, _______ } },
-    [_DEFAULT_LAYER_3] = BASE_ENCODERS,
+    [_DEFAULT_LAYER_3] = { { _______, _______ }, { _______, _______ } },
-    [_DEFAULT_LAYER_4] = BASE_ENCODERS,
+    [_DEFAULT_LAYER_4] = { { _______, _______ }, { _______, _______ } },
     [_GAMEPAD]         = { { _______, _______ }, { _______, _______ } },
     [_DIABLO]          = { { _______, _______ }, { _______, _______ } },
     [_MOUSE]           = { { _______, _______ }, { KC_WH_D, KC_WH_U } },
@@ -188,15 +187,15 @@ bool encoder_update_user(uint8_t index, bool clockwise) {
 #endif
 
 #ifdef OLED_ENABLE
-extern uint16_t typing_mode;
+#    include "keyrecords/unicode.h"
 
 oled_rotation_t oled_init_keymap(oled_rotation_t rotation) {
     return OLED_ROTATION_180;
 }
 
-void oled_render_large_display(void) {
+void oled_render_large_display(bool side) {
-    if (is_keyboard_left()) {
+    if (side) {
-        render_wpm_graph(54, 64);
+        render_wpm_graph(56, 64);
     } else {
         oled_advance_page(true);
         oled_advance_page(true);
@@ -214,25 +213,25 @@ void oled_render_large_display(void) {
         oled_set_cursor(1, 14);
         oled_write_ln_P(PSTR("Unicode:"), false);
         switch (typing_mode) {
-            case KC_WIDE:
+            case UCTM_WIDE:
                 oled_write_P(PSTR("        Wide"), false);
                 break;
-            case KC_SCRIPT:
+            case UCTM_SCRIPT:
                 oled_write_P(PSTR("      Script"), false);
                 break;
-            case KC_BLOCKS:
+            case UCTM_BLOCKS:
                 oled_write_P(PSTR("      Blocks"), false);
                 break;
-            case KC_REGIONAL:
+            case UCTM_REGIONAL:
                 oled_write_P(PSTR("    Regional"), false);
                 break;
-            case KC_AUSSIE:
+            case UCTM_AUSSIE:
                 oled_write_P(PSTR("      Aussie"), false);
                 break;
-            case KC_ZALGO:
+            case UCTM_ZALGO:
                 oled_write_P(PSTR("       Zalgo"), false);
                 break;
-            case KC_NOMODE:
+            case UCTM_NO_MODE:
                 oled_write_P(PSTR("      Normal"), false);
                 break;
             default:

keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/rules.mk

@@ -32,6 +32,9 @@ ifeq ($(strip $(KEYBOARD)), handwired/tractyl_manuform/5x6_right/teensy2pp)
     AUTOCORRECTION_ENABLE        = no
     CAPS_WORD_ENABLE             = yes
 endif
+ifeq ($(strip $(KEYBOARD)), handwired/tractyl_manuform/5x6_right/f411)
+    BOOTLOADER = tinyuf2
+endif
 # DEBOUNCE_TYPE = sym_eager_pk
 
 OLED_DRIVER = custom

keyboards/keebio/iris/keymaps/drashna/keymap.c

@@ -91,8 +91,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    ),
 
   [_ADJUST] = LAYOUT_wrapper(
-      KC_MAKE, _______, _______, _______, _______, _______,                      _________________ADJUST_R1_________________, KC_RST,
+      QK_MAKE, _______, _______, _______, _______, _______,                      _________________ADJUST_R1_________________, QK_BOOT,
-      VRSN,    _________________ADJUST_L1_________________,                      KC_NUKE, _______, _______, _______, _______, EEP_RST,
+      VRSN,    _________________ADJUST_L1_________________,                      KC_NUKE, _______, _______, _______, _______, EE_CLR,
       _______, _________________ADJUST_L2_________________,                      _________________ADJUST_R2_________________, TG_MODS,
       _______, _________________ADJUST_L3_________________, TG_GAME,    _______, _________________ADJUST_R3_________________, KC_MPLY,
                                         _______, _______, _______,        _______, _______, _______

keyboards/keebio/viterbi/keymaps/drashna/keymap.c

@@ -51,8 +51,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [_MEDIA] = LAYOUT_ortho_5x7(
-      KC_MAKE, RESET,   MU_TOG,  AU_ON,   AU_OFF,  CK_TOGG, RGB_SAD,
+      QK_MAKE, QK_BOOT, MU_TOG,  AU_ON,   AU_OFF,  CK_TOGG, RGB_SAD,
-      _______, EEP_RST, KC_RGB_T,RGB_M_P, RGB_M_B, RGB_M_R, RGB_SAI,
+      _______, EE_CLR, KC_RGB_T,RGB_M_P, RGB_M_B, RGB_M_R, RGB_SAI,
       RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_SW,RGB_M_SN,RGB_M_K, RGB_HUD,
       KC_MPLY, KC_MPRV, KC_MNXT, RGB_M_X, RGB_M_G, RGB_M_P, RGB_HUI,
       KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, RGB_VAD, RGB_VAI

keyboards/maple_computing/c39/keymaps/drashna/keymap.c

@@ -75,8 +75,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [_ADJUST] = LAYOUT_wrapper(
-    KC_MAKE, _________________ADJUST_L1_________________, KC_NUKE, _________________ADJUST_R1_________________, KC_RST,
+    QK_MAKE, _________________ADJUST_L1_________________, KC_NUKE, _________________ADJUST_R1_________________, QK_BOOT,
-    VRSN,    _________________ADJUST_L2_________________, MG_NKRO, _________________ADJUST_R2_________________, EEP_RST,
+    VRSN,    _________________ADJUST_L2_________________, MG_NKRO, _________________ADJUST_R2_________________, EE_CLR,
     TG_MODS, _________________ADJUST_L3_________________, KC_RGB_T,_________________ADJUST_R3_________________, RGB_IDL
   )
 };

keyboards/maple_computing/launchpad/keymaps/drashna/keymap.c

@@ -79,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_Q,    CALTDEL, \
         KC_A,    TSKMGR, \
         KC_Z,    KC_X, \
-        _______, RESET \
+        _______, QK_BOOT \
       )
 
 };

keyboards/moonlander/keymaps/drashna/config.h

@@ -18,5 +18,10 @@
 #pragma once
 
 #define TAPPING_TERM_PER_KEY
-#define WAIT_FOR_USB
+// #define WAIT_FOR_USB
 // #define NO_USB_STARTUP_CHECK
+
+#define SECURE_UNLOCK_SEQUENCE \
+    {                          \
+        { 2, 1 }, { 2, 2 }, { 2, 3 }, { 2, 4 } \
+    }

keyboards/moonlander/keymaps/drashna/keymap.c

@@ -106,12 +106,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 
     [_ADJUST] = LAYOUT_moonlander_wrapper(
-        KC_MAKE, KC_WIDE,KC_AUSSIE,KC_SCRIPT,KC_ZALGO,KC_NOMODE,_______,   KC_NUKE,KC_NOMODE,KC_BLOCKS,KC_REGIONAL,_______,_______, KC_RST,
+        QK_MAKE, KC_WIDE,KC_AUSSIE,KC_SCRIPT,KC_ZALGO,KC_NOMODE,_______,   KC_NUKE,KC_NOMODE,KC_BLOCKS,KC_REGIONAL,_______,_______, QK_BOOT,
-        VRSN,    _________________ADJUST_L1_________________, TG(_DIABLOII),  _______, _________________ADJUST_R1_________________, EEP_RST,
+        VRSN,    _________________ADJUST_L1_________________, TG(_DIABLOII),  _______, _________________ADJUST_R1_________________, EE_CLR,
         KEYLOCK, _________________ADJUST_L2_________________, _______,        _______, _________________ADJUST_R2_________________, RGB_IDL,
         UC_MOD,  _________________ADJUST_L3_________________,                          _________________ADJUST_R3_________________, TG_MODS,
         _______, _______, _______, _______, _______,          _______,        _______,          _______, _______, _______, _______, AUTO_CTN,
-                                            REBOOT,  _______, _______,        _______, _______, _______
+                                            QK_RBT,  _______, _______,        _______, _______, _______
     ),
 };
 

keyboards/orthodox/keymaps/drashna/keymap.c

@@ -61,8 +61,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [_ADJUST] = LAYOUT_wrapper(\
-    KC_MAKE, _________________ADJUST_L1_________________,                                                               _________________ADJUST_R1_________________, KC_RESET,
+    QK_MAKE, _________________ADJUST_L1_________________,                                                               _________________ADJUST_R1_________________, QK_BOOT,
-    VRSN,    _________________ADJUST_L2_________________,          _______, _______,         _______, KC_NUKE,          _________________ADJUST_R2_________________, EEP_RST,
+    VRSN,    _________________ADJUST_L2_________________,          _______, _______,         _______, KC_NUKE,          _________________ADJUST_R2_________________, EE_CLR,
     TG_MODS, _________________ADJUST_L3_________________, _______, _______, _______,         _______, _______, _______, _________________ADJUST_R3_________________, KC_MPLY
   )
 

keyboards/ploopyco/mouse/keymaps/drashna/config.h

@@ -27,3 +27,5 @@
 #define RGBLIGHT_EFFECT_KNIGHT
 #define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLIGHT_SLEEP
+
+#define MOUSE_EXT_REPORT

keyboards/ploopyco/mouse/keymaps/drashna/keymap.c

@@ -23,7 +23,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT(/* Base */
                  C(KC_C), KC_BTN1, KC_BTN3, KC_BTN2, MO(1), KC_BTN4, KC_BTN5, DPI_CONFIG),
     [1] = LAYOUT(/* Base */
-                 RGB_HUI, RGB_MOD, RGB_TOG, RGB_RMOD, MO(1), KC_VOLU, KC_VOLD, RESET)
+                 RGB_HUI, RGB_MOD, RGB_TOG, RGB_RMOD, MO(1), KC_VOLU, KC_VOLD, QK_BOOT)
 
 };
 

keyboards/splitkb/kyria/keymaps/drashna/config.h

@@ -46,5 +46,4 @@
 #define BOOTMAGIC_LITE_ROW_RIGHT    4
 #define BOOTMAGIC_LITE_COLUMN_RIGHT 7
 
-#define I2C1_CLOCK_SPEED 400000
+#define SERIAL_USART_SPEED       921600
-#define I2C1_DUTY_CYCLE  FAST_DUTY_CYCLE_2

keyboards/splitkb/kyria/keymaps/drashna/keymap.c

@@ -90,10 +90,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                    _______, _______, _______, _______, _______,   _______, _______, _______, _______, _______
     ),
     [_ADJUST] = LAYOUT_wrapper(
-        KC_MAKE, _________________ADJUST_L1_________________,                                       _________________ADJUST_R1_________________, KC_RESET,
+        QK_MAKE, _________________ADJUST_L1_________________,                                       _________________ADJUST_R1_________________, QK_BOOT,
-        VRSN,    _________________ADJUST_L2_________________,                                       _________________ADJUST_R2_________________, EEP_RST,
+        VRSN,    _________________ADJUST_L2_________________,                                       _________________ADJUST_R2_________________, EE_CLR,
         UC_MOD,  _________________ADJUST_L3_________________, HPT_TOG, HPT_FBK,   MG_NKRO, UC_MOD,  _________________ADJUST_R3_________________, TG_MODS,
-                                   REBOOT,  _______, KEYLOCK, KC_NUKE, _______,   _______, _______, _______, _______, AUTO_CTN
+                                   QK_RBT,  _______, KEYLOCK, KC_NUKE, _______,   _______, _______, _______, _______, AUTO_CTN
     ),
 //     [_LAYERINDEX] = LAYOUT_wrapper(
 //       _______, _______, _______, _______, _______, _______,                                       _______, _______, _______, _______, _______, _______,
@@ -105,7 +105,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 #ifdef ENCODER_MAP_ENABLE
 const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
-    [_DEFAULT_LAYER_1] = { { KC_DOWN, KC_UP   }, { KC_VOLD, KC_VOLU } },
+    [_DEFAULT_LAYER_1] = { { KC_VOLD, KC_VOLU }, { KC_WH_D, KC_WH_U } },
     [_DEFAULT_LAYER_2] = { { _______, _______ }, { _______, _______ } },
     [_DEFAULT_LAYER_3] = { { _______, _______ }, { _______, _______ } },
     [_DEFAULT_LAYER_4] = { { _______, _______ }, { _______, _______ } },
@@ -129,9 +129,9 @@ oled_rotation_t oled_init_keymap(oled_rotation_t rotation) {
 #endif
 }
 
-void oled_render_large_display(void) {
+void oled_render_large_display(bool side) {
-    if (is_keyboard_left()) {
+    if (side) {
-        render_wpm_graph(54, 64);
+        render_wpm_graph(56, 64);
     } else {
         static const char PROGMEM kyria_logo[] = {
             0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,128,128,192,224,240,112,120, 56, 60, 28, 30, 14, 14, 14,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7, 14, 14, 14, 30, 28, 60, 56,120,112,240,224,192,128,128,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
@@ -149,27 +149,6 @@ void oled_render_large_display(void) {
 }
 #endif
 
-#ifdef ENCODER_ENABLE
-bool encoder_update_user(uint8_t index, bool clockwise) {
-    if (index == 0) {
-        // Volume control
-        if (clockwise) {
-            tap_code(KC_VOLU);
-        } else {
-            tap_code(KC_VOLD);
-        }
-    } else if (index == 1) {
-        // Page up/Page down
-        if (clockwise) {
-            tap_code(KC_PGDN);
-        } else {
-            tap_code(KC_PGUP);
-        }
-    }
-    return true;
-}
-#endif
-
 #ifdef RGBLIGHT_LAYERS
 const rgblight_segment_t PROGMEM shift_layers[]   = RGBLIGHT_LAYER_SEGMENTS({8, 1, 120, 255, 255}, {18, 1, 120, 255, 255});
 const rgblight_segment_t PROGMEM control_layers[] = RGBLIGHT_LAYER_SEGMENTS({6, 1, 0, 255, 255}, {16, 1, 0, 255, 255});
@@ -188,3 +167,12 @@ void matrix_scan_keymap(void) {
     rgblight_set_layer_state(3, mods & MOD_MASK_GUI);
 }
 #endif
+
+
+#ifdef KEYBOARD_splitkb_kyria_rev1_proton_c
+void matrix_output_unselect_delay(uint8_t line, bool key_pressed) {
+    for (int32_t i = 0; i < 40; i++) {
+        __asm__ volatile("nop" ::: "memory");
+    }
+}
+#endif

keyboards/splitkb/kyria/keymaps/drashna/rules.mk

@@ -17,11 +17,10 @@ ifeq ($(strip $(KEYBOARD)), splitkb/kyria/rev1/proton_c)
     TAP_DANCE_ENABLE       = yes
     SWAP_HANDS_ENABLE      = yes
     LTO_ENABLE             = no
-    CTPC                   = yes
+    ENCODER_MAP_ENABLE     = yes
     AUTOCORRECTION_ENABLE  = yes
     CAPS_WORD_ENABLE       = yes
     OLED_DRIVER            = custom
-    DEBUG_MATRIX_SCAN_RATE_ENABLE = api
 else
     LTO_ENABLE             = yes
     BOOTLOADER             = qmk-hid

keyboards/splitkb/zima/keymaps/drashna/keymap.c

@@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_P1,   KC_P2,   KC_P3
     ),
     [1] = LAYOUT_ortho_4x3( /* Layer 1 */
-        RESET,   _______, XXXXXXX,
+        QK_BOOT, _______, XXXXXXX,
         AU_ON,   AU_OFF,  XXXXXXX,
         CK_TOGG, XXXXXXX, CK_UP,
         CK_RST,  XXXXXXX, CK_DOWN

keyboards/work_louder/work_board/keymaps/drashna/keymap.c

@@ -83,8 +83,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [_ADJUST] = LAYOUT_wrapper(
-    KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RST, _______,
+    QK_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, QK_BOOT, _______,
-    VRSN,    _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST,
+    VRSN,    _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EE_CLR,
     _______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, RGB_IDL,
     KEYLOCK, _______, _______, _______, _______, KC_NUKE, _______, _______, _______, _______, _______, TG_MODS
   )

layouts/community/ergodox/drashna/keymap.c

@@ -167,8 +167,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
             ),
 
   [_ADJUST] = LAYOUT_ergodox_pretty_wrapper(
-             KC_MAKE, _______, _______, _______, _______, _______, UC_MOD,                  KC_NUKE, _________________ADJUST_R1_________________, KC_RST,
+             QK_MAKE, _______, _______, _______, _______, _______, UC_MOD,                  KC_NUKE, _________________ADJUST_R1_________________, QK_BOOT,
-             VRSN,    _________________ADJUST_L1_________________, _______,                 _______, _________________ADJUST_R1_________________, EEP_RST,
+             VRSN,    _________________ADJUST_L1_________________, _______,                 _______, _________________ADJUST_R1_________________, EE_CLR,
              _______, _________________ADJUST_L2_________________,                                   _________________ADJUST_R2_________________, RGB_IDL,
              KEYLOCK, _________________ADJUST_L3_________________, _______,                 _______, _________________ADJUST_R3_________________, TG_MODS,
              _______, _______, _______, _______, _______,                                                     _______, _______, _______, _______, _______,

layouts/community/numpad_5x6/drashna/keymap.c

@@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [_GAMEPAD] = LAYOUT_numpad_5x6(
-		RGB_TOG, _______,  _______, EEP_RST, KC_MAKE, RESET,
+		RGB_TOG, _______,  _______, EE_CLR, QK_MAKE, QK_BOOT,
 		RGB_MOD, RGB_RMOD, _______, _______, _______,
 		RGB_HUI, RGB_HUD,  _______, _______, _______, _______,
 		RGB_SAI, RGB_SAD,  _______, _______, _______,

layouts/community/ortho_4x12/drashna/keymap.c

@@ -103,10 +103,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [_ADJUST] = LAYOUT_ortho_4x12_wrapper(
-    KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RST,
+    QK_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, QK_BOOT,
-    VRSN,    _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST,
+    VRSN,    _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EE_CLR,
     TH_LVL,  _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, RGB_IDL,
-    KEYLOCK, _______, _______, REBOOT,  _______, KC_NUKE, _______, _______, AUTO_CTN,_______, _______, TG_MODS
+    KEYLOCK, _______, _______, QK_RBT,  _______, KC_NUKE, _______, _______, AUTO_CTN,_______, _______, TG_MODS
   )
 
 };

layouts/community/ortho_5x12/drashna/keymap.c

@@ -121,8 +121,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_ADJUST] = LAYOUT_ortho_5x12_wrapper( \
-  KC_MAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RST,
+  QK_MAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, QK_BOOT,
-  VRSN,    _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, EEP_RST,
+  VRSN,    _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, EE_CLR,
   _______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, RGB_IDL,
   KEYLOCK, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, TG_MODS,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______

layouts/community/split_3x6_3/drashna/keymap.c

@@ -87,10 +87,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
   [_ADJUST] = LAYOUT_split_3x6_3_wrapper( \
-    KC_MAKE, _________________ADJUST_L1_________________,                    _________________ADJUST_R1_________________, KC_RESET,
+    QK_MAKE, _________________ADJUST_L1_________________,                    _________________ADJUST_R1_________________, QK_BOOT,
-    VRSN,    _________________ADJUST_L2_________________,                    _________________ADJUST_R2_________________, EEP_RST,
+    VRSN,    _________________ADJUST_L2_________________,                    _________________ADJUST_R2_________________, EE_CLR,
     KEYLOCK, _________________ADJUST_L3_________________,                    _________________ADJUST_R3_________________, RGB_IDL,
-                                     REBOOT, KC_NUKE, _______,        _______, TG_MODS, AUTO_CTN
+                                     QK_RBT, KC_NUKE, _______,        _______, TG_MODS, AUTO_CTN
   )
 };
 // clang-format on
@@ -120,7 +120,9 @@ uint32_t anim_frame_duration = 500;
 uint8_t  current_sleep_frame = 0;
 uint8_t  current_wake_frame  = 0;  // uncomment if WAKE_FRAMES >1
 uint8_t  current_kaki_frame  = 0;
+#ifdef SWAP_HANDS_ENABLE
 uint8_t  current_rtogi_frame = 0;
+#endif
 // uint8_t current_ltogi_frame = 0;
 // clang-format off
 void render_small_kitty(void) {
@@ -171,6 +173,7 @@ void render_small_kitty(void) {
                                                                     0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x0d, 0x8d, 0x55, 0x50, 0x94, 0xf0, 0x10, 0x0a, 0x0e, 0x1d, 0x95, 0x24, 0x24, 0x27, 0x13, 0xe1, 0x01, 0x01, 0x01, 0x01, 0x02, 0xfc, 0x00, 0x00, 0x00, 0x00,
                                                                     0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x1f, 0x14, 0x14, 0x10, 0x10, 0x11, 0x1f, 0x10, 0x10, 0x18, 0x0f, 0x18, 0x10, 0x10, 0x1f, 0x19, 0x18, 0x1c, 0x14, 0x14, 0x17, 0x14, 0x14, 0x14, 0x14, 0x08,
                                                                 }};
+#ifdef SWAP_HANDS_ENABLE
     static const char PROGMEM rtogi[KAKI_FRAMES][ANIM_SIZE]  = {{
                                                                     // 'rtogi1', 32x32px
                                                                     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x20, 0x10, 0x10, 0x08, 0x04, 0x02, 0x01, 0x0f, 0x90, 0x10, 0x20, 0xf0, 0xf8, 0xf8,
@@ -184,15 +187,20 @@ void render_small_kitty(void) {
                                                                     0x0f, 0x11, 0x22, 0x44, 0x48, 0x4c, 0x43, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xc0, 0x80, 0x80, 0xc0, 0xe1, 0xfe, 0xb8, 0x88, 0x0c, 0x04, 0x06, 0x06, 0x06, 0x0e, 0x0e, 0x06, 0x01,
                                                                     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x06, 0x04, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04, 0x04, 0x07, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
                                                                 }};
-
+#endif
     // assumes 1 frame prep stage
+#ifdef SWAP_HANDS_ENABLE
     extern bool swap_hands;
+#endif
     void        animation_phase(void) {
+#ifdef SWAP_HANDS_ENABLE
         if (swap_hands) {
             anim_frame_duration = 300;
             current_rtogi_frame = (current_rtogi_frame + 1) % RTOGI_FRAMES;
             oled_write_raw_P(rtogi[abs((RTOGI_FRAMES - 1) - current_rtogi_frame)], ANIM_SIZE);
-        } else {
+        } else
+#endif
+        {
             if (get_current_wpm() <= SLEEP_SPEED) {
                 anim_frame_duration = 500;
                 current_sleep_frame = (current_sleep_frame + 1) % SLEEP_FRAMES;

layouts/community/split_3x6_3/drashna/rules.mk

@@ -14,13 +14,21 @@ UNICODE_ENABLE             = no  # Unicode
 RGBLIGHT_ENABLE            = no  # Enable WS2812 RGB underlight.
 SWAP_HANDS_ENABLE          = no  # Enable one-hand typing
 
-ifeq ($(strip $(KEYBOARD)), crkbd/rev1)
+USE_ARM_CONFIG ?= no
-    OLED_ENABLE            = yes
+ifeq ($(strip $(CONVERT_TO)), proton_c)
-    RGB_MATRIX_ENABLE      = yes
+    USE_ARM_CONFIG = yes
-    HAPTIC_ENABLE          = no
+endif
+ifeq ($(strip $(CTPC)), yes)
+    USE_ARM_CONFIG = yes
+endif
+ifeq ($(strip $(MCU)), STM32F303)
+    USE_ARM_CONFIG = yes
+endif
+ifeq ($(strip $(MCU)), STM32F401)
+    USE_ARM_CONFIG = yes
 endif
 
-ifeq ($(strip $(CTPC)), yes)
+ifeq ($(strip $(USE_ARM_CONFIG)), yes)
     HAPTIC_ENABLE          = no
     WS2812_DRIVER          = pwm # won't work without a patch to the ctpc mk file
     SERIAL_DRIVER          = usart
@@ -33,3 +41,13 @@ else
     BOOTLOADER             = qmk-hid
     BOOTLOADER_SIZE        = 512
 endif
+
+ifeq ($(strip $(KEYBOARD)), crkbd/rev1)
+    OLED_ENABLE            = yes
+    RGB_MATRIX_ENABLE      = yes
+    HAPTIC_ENABLE          = no
+endif
+
+ifeq ($(strip $(KEYBOARD)), cantor)
+    SWAP_HANDS_ENABLE      = no
+endif

users/drashna/autocorrect_data.h

@@ -0,0 +1,5 @@
+#if __has_include("../qmk_secrets/autocorrection_data.h")
+#    include "../qmk_secrets/autocorrection_data.h"
+#else
+#    include "autocorrect_data_default.h"
+#endif

users/drashna/callbacks.c

@@ -87,6 +87,9 @@ void suspend_power_down_user(void) {
 
 __attribute__((weak)) void suspend_wakeup_init_keymap(void) {}
 void                       suspend_wakeup_init_user(void) {
+#ifdef OLED_ENABLE
+        oled_timer_reset();
+#endif
     suspend_wakeup_init_keymap();
 }
 

users/drashna/callbacks.h

@@ -23,6 +23,3 @@ void matrix_init_unicode(void);
 #ifdef SPLIT_KEYBOARD
 void matrix_slave_scan_keymap(void);
 #endif
-#ifdef CAPS_WORD_ENABLE
-#    include "keyrecords/caps_word.h"
-#endif

users/drashna/config.h

@@ -37,9 +37,9 @@
 // #    define WPM_LAUNCH_CONTROL
 // #    define WPM_ALLOW_COUNT_REGRESSOIN
 // #    define WPM_UNFILTERED
-#    define WPM_SAMPLE_SECONDS      6
+#    define WPM_SAMPLE_SECONDS      10
 #    define WPM_SAMPLE_PERIODS      50
-#    define WPM_ESTIMATED_WORD_SIZE 6
+#    define WPM_ESTIMATED_WORD_SIZE 5
 #endif
 
 #ifdef AUDIO_ENABLE
@@ -291,6 +291,12 @@
 #    ifndef OLED_BRIGHTNESS
 #        define OLED_BRIGHTNESS 50
 #    endif
+#    if !defined(STM32F4XX)
 #        undef OLED_UPDATE_INTERVAL
-#    define OLED_UPDATE_INTERVAL 100
+#        define OLED_UPDATE_INTERVAL 75
 #    endif
+#endif
+
+#define ENABLE_COMPILE_KEYCODE
+
+#define BOTH_SHIFTS_TURNS_ON_CAPS_WORD

users/drashna/keyrecords/autocorrection/autocorrection.c

@@ -10,6 +10,13 @@
 #    pragma GCC push_options
 #    pragma GCC optimize("O0")
 #    include "autocorrection_data.h"
+#    ifndef AUTOCORRECTION_MIN_LENGTH
+#        define AUTOCORRECTION_MIN_LENGTH AUTOCORRECT_MIN_LENGTH
+#    endif
+#    ifndef AUTOCORRECTION_MAX_LENGTH
+#        define AUTOCORRECTION_MAX_LENGTH AUTOCORRECT_MAX_LENGTH
+#    endif
+#    define autocorrection_data autocorrect_data
 #    if AUTOCORRECTION_MIN_LENGTH < 4
 #        error Minimum Length is too short and may cause overflows
 #    endif
@@ -17,6 +24,138 @@
 #        error Dictionary size excees maximum size permitted
 #    endif
 
+static uint8_t typo_buffer[AUTOCORRECT_MAX_LENGTH] = {KC_SPC};
+static uint8_t typo_buffer_size                    = 1;
+
+/**
+ * @brief function for querying the enabled state of autocorrect
+ *
+ * @return true if enabled
+ * @return false if disabled
+ */
+bool autocorrect_is_enabled(void) {
+    return userspace_config.autocorrection;
+}
+
+/**
+ * @brief Enables autocorrect and saves state to eeprom
+ *
+ */
+void autocorrect_enable(void) {
+    userspace_config.autocorrection = true;
+    eeconfig_update_user(userspace_config.raw);
+}
+
+/**
+ * @brief Disables autocorrect and saves state to eeprom
+ *
+ */
+void autocorrect_disable(void) {
+    userspace_config.autocorrection = false;
+    typo_buffer_size                 = 0;
+    eeconfig_update_user(userspace_config.raw);
+}
+
+/**
+ * @brief Toggles autocorrect's status and save state to eeprom
+ *
+ */
+void autocorrect_toggle(void) {
+    userspace_config.autocorrection = !userspace_config.autocorrection;
+    typo_buffer_size                 = 0;
+    eeconfig_update_user(userspace_config.raw);
+}
+
+/**
+ * @brief handler for determining if autocorrect should process keypress
+ *
+ * @param keycode Keycode registered by matrix press, per keymap
+ * @param record keyrecord_t structure
+ * @param typo_buffer_size passed along to allow resetting of autocorrect buffer
+ * @param mods allow processing of mod status
+ * @return true Allow autocorection
+ * @return false Stop processing and escape from autocorrect.
+ */
+__attribute__((weak)) bool process_autocorrect_user(uint16_t *keycode, keyrecord_t *record, uint8_t *typo_buffer_size, uint8_t *mods) {
+    // See quantum_keycodes.h for reference on these matched ranges.
+    switch (*keycode) {
+        // Exclude these keycodes from processing.
+        case KC_LSFT:
+        case KC_RSFT:
+        case KC_CAPS:
+        case QK_TO ... QK_ONE_SHOT_LAYER_MAX:
+        case QK_LAYER_TAP_TOGGLE ... QK_LAYER_MOD_MAX:
+        case QK_ONE_SHOT_MOD ... QK_ONE_SHOT_MOD_MAX:
+            return false;
+
+        // Mask for base keycode from shifted keys.
+        case QK_LSFT ... QK_LSFT + 255:
+        case QK_RSFT ... QK_RSFT + 255:
+            if (*keycode >= QK_LSFT && *keycode <= (QK_LSFT + 255)) {
+                *mods |= MOD_LSFT;
+            } else {
+                *mods |= MOD_RSFT;
+            }
+            *keycode &= 0xFF; // Get the basic keycode.
+            return true;
+#ifndef NO_ACTION_TAPPING
+        // Exclude tap-hold keys when they are held down
+        // and mask for base keycode when they are tapped.
+        case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
+#    ifdef NO_ACTION_LAYER
+            // Exclude Layer Tap, if layers are disabled
+            // but action tapping is still enabled.
+            return false;
+#    endif
+        case QK_MOD_TAP ... QK_MOD_TAP_MAX:
+            // Exclude hold keycode
+            if (!record->tap.count) {
+                return false;
+            }
+            *keycode &= 0xFF;
+            break;
+#else
+        case QK_MOD_TAP ... QK_MOD_TAP_MAX:
+        case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
+            // Exclude if disabled
+            return false;
+#endif
+        // Exclude swap hands keys when they are held down
+        // and mask for base keycode when they are tapped.
+        case QK_SWAP_HANDS ... QK_SWAP_HANDS_MAX:
+#ifdef SWAP_HANDS_ENABLE
+            if (*keycode >= 0x56F0 || !record->tap.count) {
+                return false;
+            }
+            *keycode &= 0xFF;
+            break;
+#else
+            // Exclude if disabled
+            return false;
+#endif
+    }
+
+    // Disable autocorrect while a mod other than shift is active.
+    if ((*mods & ~MOD_MASK_SHIFT) != 0) {
+        *typo_buffer_size = 0;
+        return false;
+    }
+
+    return true;
+}
+
+/**
+ * @brief handling for when autocorrection has been triggered
+ *
+ * @param backspaces number of characters to remove
+ * @param str pointer to PROGMEM string to replace mistyped seletion with
+ * @return true apply correction
+ * @return false user handled replacement
+ */
+__attribute__((weak)) bool apply_autocorrect(uint8_t backspaces, const char *str) {
+    return true;
+}
+
 /**
  * @brief Process handler for autocorrect feature
  *
@@ -26,130 +165,123 @@
  * @return false Stop processing keycodes, and don't send to host
  */
 bool process_autocorrection(uint16_t keycode, keyrecord_t *record) {
-    static uint8_t typo_buffer[AUTOCORRECTION_MAX_LENGTH] = {KC_SPC};
+    uint8_t mods = get_mods();
-    static uint8_t typo_buffer_size                       = 1;
+#ifndef NO_ACTION_ONESHOT
+    mods |= get_oneshot_mods();
+#endif
 
-    if (keycode == AUTO_CTN) {
+    if ((keycode >= AUTOCORRECT_ON && keycode <= AUTOCORRECT_TOGGLE) && record->event.pressed) {
-        if (record->event.pressed) {
+        if (keycode == AUTOCORRECT_ON) {
-            typo_buffer_size = 0;
+            autocorrect_enable();
-            userspace_config.autocorrection ^= 1;
+        } else if (keycode == AUTOCORRECT_OFF) {
-            eeconfig_update_user(userspace_config.raw);
+            autocorrect_disable();
+        } else if (keycode == AUTOCORRECT_TOGGLE) {
+            autocorrect_toggle();
+        } else {
+            return true;
         }
+
         return false;
     }
 
-    if (!userspace_config.autocorrection) {
+    if (!autocorrect_is_enabled()) {
         typo_buffer_size = 0;
         return true;
     }
 
-    switch (keycode) {
-        case KC_LSFT:
-        case KC_RSFT:
-            return true;
-#    ifndef NO_ACTION_TAPPING
-        case QK_MOD_TAP ... QK_MOD_TAP_MAX:
-            if (((keycode >> 8) & 0xF) == MOD_LSFT) {
-                return true;
-            }
-#        ifndef NO_ACTION_LAYER
-        case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
-#        endif
-            if (record->event.pressed || !record->tap.count) {
-                return true;
-            }
-            keycode &= 0xFF;
-            break;
-#    endif
-#    ifdef SWAP_HANDS_ENABLE
-        case QK_SWAP_HANDS ... QK_SWAP_HANDS_MAX:
-            if (keycode >= 0x56F0 || record->event.pressed || !record->tap.count) {
-                return true;
-            }
-            keycode &= 0xFF;
-            break;
-#    endif
-#    ifndef NO_ACTION_ONESHOT
-        case QK_ONE_SHOT_MOD ... QK_ONE_SHOT_MOD_MAX:
-            if ((keycode & 0xF) == MOD_LSFT) {
-                return true;
-            }
-#    endif
-        default:
-            // Disable autocorrection while a mod other than shift is active.
-            if (((get_mods() | get_oneshot_mods()) & ~MOD_MASK_SHIFT) != 0) {
-                typo_buffer_size = 0;
-                return true;
-            }
     if (!record->event.pressed) {
         return true;
     }
+
+    // autocorrect keycode verification and extraction
+    if (!process_autocorrect_user(&keycode, record, &typo_buffer_size, &mods)) {
+        return true;
     }
 
-    // Subtract buffer for Backspace key, reset for other non-alpha.
+    // keycode buffer check
-    if (!(KC_A <= keycode && keycode <= KC_Z)) {
+    switch (keycode) {
-        if (keycode == KC_BSPC) {
+        case KC_A ... KC_Z:
+            // process normally
+            break;
+        case KC_1 ... KC_0:
+        case KC_TAB ... KC_SEMICOLON:
+        case KC_GRAVE ... KC_SLASH:
+            // Set a word boundary if space, period, digit, etc. is pressed.
+            keycode = KC_SPC;
+            break;
+        case KC_ENTER:
+            // Behave more conservatively for the enter key. Reset, so that enter
+            // can't be used on a word ending.
+            typo_buffer_size = 0;
+            keycode          = KC_SPC;
+            break;
+        case KC_BSPC:
             // Remove last character from the buffer.
             if (typo_buffer_size > 0) {
                 --typo_buffer_size;
             }
             return true;
-        } else if (KC_1 <= keycode && keycode <= KC_SLSH && keycode != KC_ESC) {
+        case KC_QUOTE:
-            // Set a word boundary if space, period, digit, etc. is pressed.
+            // Treat " (shifted ') as a word boundary.
-            // Behave more conservatively for the enter key. Reset, so that enter
+            if ((mods & MOD_MASK_SHIFT) != 0) {
-            // can't be used on a word ending.
-            if (keycode == KC_ENT || (keycode == KC_MINUS && (get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT)) {
-                typo_buffer_size = 0;
-            }
                 keycode = KC_SPC;
-        } else {
+            }
+            break;
+        default:
             // Clear state if some other non-alpha key is pressed.
             typo_buffer_size = 0;
             return true;
     }
-    }
 
     // Rotate oldest character if buffer is full.
-    if (typo_buffer_size >= AUTOCORRECTION_MAX_LENGTH) {
+    if (typo_buffer_size >= AUTOCORRECT_MAX_LENGTH) {
-        memmove(typo_buffer, typo_buffer + 1, AUTOCORRECTION_MAX_LENGTH - 1);
+        memmove(typo_buffer, typo_buffer + 1, AUTOCORRECT_MAX_LENGTH - 1);
-        typo_buffer_size = AUTOCORRECTION_MAX_LENGTH - 1;
+        typo_buffer_size = AUTOCORRECT_MAX_LENGTH - 1;
     }
 
     // Append `keycode` to buffer.
     typo_buffer[typo_buffer_size++] = keycode;
     // Return if buffer is smaller than the shortest word.
-    if (typo_buffer_size < AUTOCORRECTION_MIN_LENGTH) {
+    if (typo_buffer_size < AUTOCORRECT_MIN_LENGTH) {
         return true;
     }
 
-    // Check for typo in buffer using a trie stored in `autocorrection_data`.
+    // Check for typo in buffer using a trie stored in `autocorrect_data`.
     uint16_t state = 0;
-    uint8_t  code  = pgm_read_byte(autocorrection_data + state);
+    uint8_t  code  = pgm_read_byte(autocorrect_data + state);
-    for (uint8_t i = typo_buffer_size - 1; i >= 0; --i) {
+    for (int8_t i = typo_buffer_size - 1; i >= 0; --i) {
         uint8_t const key_i = typo_buffer[i];
 
         if (code & 64) { // Check for match in node with multiple children.
             code &= 63;
-            for (; code != key_i; code = pgm_read_byte(autocorrection_data + (state += 3))) {
+            for (; code != key_i; code = pgm_read_byte(autocorrect_data + (state += 3))) {
                 if (!code) return true;
             }
             // Follow link to child node.
-            state = (pgm_read_byte(autocorrection_data + state + 1) | pgm_read_byte(autocorrection_data + state + 2) << 8);
+            state = (pgm_read_byte(autocorrect_data + state + 1) | pgm_read_byte(autocorrect_data + state + 2) << 8);
             // Check for match in node with single child.
         } else if (code != key_i) {
             return true;
-        } else if (!(code = pgm_read_byte(autocorrection_data + (++state)))) {
+        } else if (!(code = pgm_read_byte(autocorrect_data + (++state)))) {
             ++state;
         }
 
-        code = pgm_read_byte(autocorrection_data + state);
+        // Stop if `state` becomes an invalid index. This should not normally
+        // happen, it is a safeguard in case of a bug, data corruption, etc.
+        if (state >= DICTIONARY_SIZE) {
+            return true;
+        }
 
-        if (code & 128) {  // A typo was found! Apply autocorrection.
+        code = pgm_read_byte(autocorrect_data + state);
-            const uint8_t backspaces = code & 63;
+
+        if (code & 128) { // A typo was found! Apply autocorrect.
+            const uint8_t backspaces = (code & 63) + !record->event.pressed;
+            if (apply_autocorrect(backspaces, (char const *)(autocorrect_data + state + 1))) {
                 for (uint8_t i = 0; i < backspaces; ++i) {
                     tap_code(KC_BSPC);
                 }
-            send_string_P((char const*)(autocorrection_data + state + 1));
+                send_string_P((char const *)(autocorrect_data + state + 1));
+            }
 
             if (keycode == KC_SPC) {
                 typo_buffer[0]   = KC_SPC;
@@ -166,5 +298,7 @@ bool process_autocorrection(uint16_t keycode, keyrecord_t* record) {
 #    pragma GCC pop_options
 #else
 #    pragma message "Warning!!! Autocorrect is not corretly setup!"
-bool process_autocorrection(uint16_t keycode, keyrecord_t* record) { return true; }
+bool process_autocorrection(uint16_t keycode, keyrecord_t* record) {
+    return true;
+}
 #endif

users/drashna/keyrecords/autocorrection/autocorrection.h

@@ -8,3 +8,10 @@
 #include "drashna.h"
 
 bool process_autocorrection(uint16_t keycode, keyrecord_t *record);
+bool process_autocorrect_user(uint16_t *keycode, keyrecord_t *record, uint8_t *typo_buffer_size, uint8_t *mods);
+bool apply_autocorrect(uint8_t backspaces, const char *str);
+
+bool autocorrect_is_enabled(void);
+void autocorrect_enable(void);
+void autocorrect_disable(void);
+void autocorrect_toggle(void);

users/drashna/keyrecords/autocorrection/make_autocorrection_data.py

@@ -1,4 +1,4 @@
-# Copyright 2021 Google LLC
+# Copyright 2021-2022 Google LLC
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -29,6 +29,7 @@ Each line of the dict file defines one typo and its correction with the syntax
 Example:
 
   :thier        -> their
+  dosen't       -> doesn't
   fitler        -> filter
   lenght        -> length
   ouput         -> output
@@ -42,7 +43,7 @@ https://getreuer.info/posts/keyboards/autocorrection
 
 import sys
 import textwrap
-from typing import Any, Dict, List, Tuple
+from typing import Any, Dict, Iterator, List, Tuple
 
 try:
   from english_words import english_words_lower_alpha_set as CORRECT_WORDS
@@ -51,52 +52,52 @@ except ImportError:
         'correctly spelled word. To check for this, install the english_words '
         'package and rerun this script:\n\n  pip install english_words\n')
   # Use a minimal word list as a fallback.
-  CORRECT_WORDS = ('information', 'available', 'international', 'language',
+  CORRECT_WORDS = ('apparent', 'association', 'available', 'classification',
-                   'loosest', 'reference', 'wealthier', 'entertainment',
+                   'effect', 'entertainment', 'fantastic', 'information',
-                   'association', 'provides', 'technology', 'statehood')
+                   'integrate', 'international', 'language', 'loosest',
+                   'manual', 'nothing', 'provides', 'reference', 'statehood',
+                   'technology', 'virtually', 'wealthier', 'wonderful')
 
 KC_A = 4
 KC_SPC = 0x2c
+KC_QUOT = 0x34
+
+TYPO_CHARS = dict(
+  [
+    ("'", KC_QUOT),
+    (':', KC_SPC),  # "Word break" character.
+  ] +
+  # Characters a-z.
+  [(chr(c), c + KC_A - ord('a')) for c in range(ord('a'), ord('z') + 1)]
+)
+
 
 def parse_file(file_name: str) -> List[Tuple[str, str]]:
   """Parses autocorrections dictionary file.
 
   Each line of the file defines one typo and its correction with the syntax
   "typo -> correction". Blank lines or lines starting with '#' are ignored. The
-  function validates that typos only have characters a-z and that typos are not
+  function validates that typos only have characters in TYPO_CHARS, that
-  substrings of other typos, otherwise the longer typo would never trigger.
+  typos are not substrings of other typos, and checking that typos don't trigger
+  on CORRECT_WORDS.
 
   Args:
     file_name: String, path of the autocorrections dictionary.
   Returns:
     List of (typo, correction) tuples.
   """
-
+  correct_words = ('information', 'available', 'international', 'language', 'loosest', 'reference', 'wealthier', 'entertainment', 'association', 'provides', 'technology', 'statehood')
   autocorrections = []
   typos = set()
-  line_number = 0
+  for line_number, typo, correction in parse_file_lines(file_name):
-  for line in open(file_name, 'rt'):
-    line_number += 1
-    line = line.strip()
-    if line and line[0] != '#':
-      # Parse syntax "typo -> correction", using strip to ignore indenting.
-      tokens = [token.strip() for token in line.split('->', 1)]
-      if len(tokens) != 2 or not tokens[0]:
-        print(f'Error:{line_number}: Invalid syntax: "{line}"')
-        sys.exit(1)
-
-      typo, correction = tokens
-      typo = typo.lower()  # Force typos to lowercase.
-      typo = typo.replace(' ', ':')
-
     if typo in typos:
       print(f'Warning:{line_number}: Ignoring duplicate typo: "{typo}"')
       continue
 
     # Check that `typo` is valid.
-      if not(all([ord('a') <= ord(c) <= ord('z') or c == ':' for c in typo])):
+    if not(all([c in TYPO_CHARS for c in typo])):
       print(f'Error:{line_number}: Typo "{typo}" has '
-              'characters other than a-z and :.')
+            'characters other than ' + ''.join(TYPO_CHARS.keys()))
       sys.exit(1)
     for other_typo in typos:
       if typo in other_typo or other_typo in typo:
@@ -108,25 +109,7 @@ def parse_file(file_name: str) -> List[Tuple[str, str]]:
       print(f'Warning:{line_number}: It is suggested that typos are at '
             f'least 5 characters long to avoid false triggers: "{typo}"')
 
-      if typo.startswith(':') and typo.endswith(':'):
+    check_typo_against_dictionary(typo, line_number, correct_words)
-        if typo[1:-1] in CORRECT_WORDS:
-          print(f'Warning:{line_number}: Typo "{typo}" is a correctly spelled '
-                'dictionary word.')
-      elif typo.startswith(':') and not typo.endswith(':'):
-        for word in CORRECT_WORDS:
-          if word.startswith(typo[1:]):
-            print(f'Warning:{line_number}: Typo "{typo}" would falsely trigger '
-                  f'on correctly spelled word "{word}".')
-      elif not typo.startswith(':') and typo.endswith(':'):
-        for word in CORRECT_WORDS:
-          if word.endswith(typo[:-1]):
-            print(f'Warning:{line_number}: Typo "{typo}" would falsely trigger '
-                  f'on correctly spelled word "{word}".')
-      elif not typo.startswith(':') and not typo.endswith(':'):
-        for word in CORRECT_WORDS:
-          if typo in word:
-            print(f'Warning:{line_number}: Typo "{typo}" would falsely trigger '
-                  f'on correctly spelled word "{word}".')
 
     autocorrections.append((typo, correction))
     typos.add(typo)
@@ -152,6 +135,47 @@ def make_trie(autocorrections: List[Tuple[str, str]]) -> Dict[str, Any]:
   return trie
 
 
+def parse_file_lines(file_name: str) -> Iterator[Tuple[int, str, str]]:
+  """Parses lines read from `file_name` into typo-correction pairs."""
+
+  line_number = 0
+  for line in open(file_name, 'rt'):
+    line_number += 1
+    line = line.strip()
+    if line and line[0] != '#':
+      # Parse syntax "typo -> correction", using strip to ignore indenting.
+      tokens = [token.strip() for token in line.split('->', 1)]
+      if len(tokens) != 2 or not tokens[0]:
+        print(f'Error:{line_number}: Invalid syntax: "{line}"')
+        sys.exit(1)
+
+      typo, correction = tokens
+      typo = typo.lower()  # Force typos to lowercase.
+      typo = typo.replace(' ', ':')
+
+      yield line_number, typo, correction
+
+
+def check_typo_against_dictionary(typo: str, line_number: int, correct_words) -> None:
+  """Checks `typo` against English dictionary words."""
+
+  if typo.startswith(':') and typo.endswith(':'):
+    if typo[1:-1] in correct_words:
+      print(f'Warning:{line_number}: Typo "{typo}" is a correctly spelled dictionary word.')
+  elif typo.startswith(':') and not typo.endswith(':'):
+    for word in correct_words:
+      if word.startswith(typo[1:]):
+            print(f'Warning:{line_number}: Typo "{typo}" would falsely trigger on correctly spelled word "{word}".')
+  elif not typo.startswith(':') and typo.endswith(':'):
+    for word in correct_words:
+      if word.endswith(typo[:-1]):
+            print(f'Warning:{line_number}: Typo "{typo}" would falsely trigger on correctly spelled word "{word}".')
+  elif not typo.startswith(':') and not typo.endswith(':'):
+    for word in correct_words:
+      if typo in word:
+        print(f'Warning:{line_number}: Typo "{typo}" would falsely trigger on correctly spelled word "{word}".')
+
+
 def serialize_trie(autocorrections: List[Tuple[str, str]],
                    trie: Dict[str, Any]) -> List[int]:
   """Serializes trie and correction data in a form readable by the C code.
@@ -165,7 +189,7 @@ def serialize_trie(autocorrections: List[Tuple[str, str]],
   table = []
 
   # Traverse trie in depth first order.
-  def traverse(trie_node):
+  def traverse(trie_node: Dict[str, Any]) -> Dict[str, Any]:
     if 'LEAF' in trie_node:  # Handle a leaf trie node.
       typo, correction = trie_node['LEAF']
       word_boundary_ending = typo[-1] == ':'
@@ -200,37 +224,35 @@ def serialize_trie(autocorrections: List[Tuple[str, str]],
 
   traverse(trie)
 
-  def serialize(e):
+  def serialize(e: Dict[str, Any]) -> List[int]:
-    def kc_code(c):
-      if ord('a') <= ord(c) <= ord('z'):
-        return ord(c) - ord('a') + KC_A
-      elif c == ':':
-        return KC_SPC
-      else:
-        raise ValueError(f'Invalid character: {c}')
-
-    encode_link = lambda link: [link['byte_offset'] & 255,
-                                link['byte_offset'] >> 8]
-
     if not e['links']:  # Handle a leaf table entry.
       return e['data']
     elif len(e['links']) == 1:  # Handle a chain table entry.
-      return list(map(kc_code, e['chars'])) + [0] #+ encode_link(e['links'][0]))
+      return [TYPO_CHARS[c] for c in e['chars']] + [0]
     else:  # Handle a branch table entry.
       data = []
       for c, link in zip(e['chars'], e['links']):
-        data += [kc_code(c) | (0 if data else 64)] + encode_link(link)
+        data += [TYPO_CHARS[c] | (0 if data else 64)] + encode_link(link)
       return data + [0]
 
   byte_offset = 0
   for e in table:  # To encode links, first compute byte offset of each entry.
     e['byte_offset'] = byte_offset
     byte_offset += len(serialize(e))
-    assert 0 <= byte_offset <= 0xffff
 
   return [b for e in table for b in serialize(e)]  # Serialize final table.
 
 
+def encode_link(link: Dict[str, Any]) -> List[int]:
+  """Encodes a node link as two bytes."""
+  byte_offset = link['byte_offset']
+  if not (0 <= byte_offset <= 0xffff):
+    print('Error: The autocorrection table is too large, a node link exceeds '
+          '64KB limit. Try reducing the autocorrection dict to fewer entries.')
+    sys.exit(1)
+  return [byte_offset & 255, byte_offset >> 8]
+
+
 def write_generated_code(autocorrections: List[Tuple[str, str]],
                          data: List[int],
                          file_name: str) -> None:
@@ -242,7 +264,10 @@ def write_generated_code(autocorrections: List[Tuple[str, str]],
     file_name: String, path of the output C file.
   """
   assert all(0 <= b <= 255 for b in data)
-  typo_len = lambda e: len(e[0])
+
+  def typo_len(e: Tuple[str, str]) -> int:
+    return len(e[0])
+
   min_typo = min(autocorrections, key=typo_len)[0]
   max_typo = max(autocorrections, key=typo_len)[0]
   generated_code = ''.join([
@@ -252,9 +277,8 @@ def write_generated_code(autocorrections: List[Tuple[str, str]],
                    for typo, correction in autocorrections)),
     f'\n#define AUTOCORRECTION_MIN_LENGTH {len(min_typo)}  // "{min_typo}"\n',
     f'#define AUTOCORRECTION_MAX_LENGTH {len(max_typo)}  // "{max_typo}"\n\n',
-    f'#define DICTIONARY_SIZE {len(data)}\n\n',
+    textwrap.fill('static const uint8_t autocorrection_data[%d] PROGMEM = {%s};' % (
-    textwrap.fill('static const uint8_t autocorrection_data[DICTIONARY_SIZE] PROGMEM = {%s};' % (
+      len(data), ', '.join(map(str, data))), width=80, subsequent_indent='  '),
-      ', '.join(map(str, data))), width=120, subsequent_indent='    '),
     '\n\n'])
 
   with open(file_name, 'wt') as f:

users/drashna/keyrecords/caps_word.c

@@ -1,139 +0,0 @@
-#include "caps_word.h"
-
-static bool caps_word_active = false;
-
-#if CAPS_WORD_IDLE_TIMEOUT > 0
-#    if CAPS_WORD_IDLE_TIMEOUT < 100 || CAPS_WORD_IDLE_TIMEOUT > 30000
-// Constrain timeout to a sensible range. With the 16-bit timer, the longest
-// representable timeout is 32768 ms, rounded here to 30000 ms = half a minute.
-#        error "caps_word: CAPS_WORD_IDLE_TIMEOUT must be between 100 and 30000 ms"
-#    endif
-
-static uint16_t idle_timer = 0;
-
-void caps_word_task(void) {
-    if (caps_word_active && timer_expired(timer_read(), idle_timer)) {
-        caps_word_set(false);
-    }
-}
-#endif // CAPS_WORD_IDLE_TIMEOUT > 0
-
-bool process_caps_word(uint16_t keycode, keyrecord_t* record) {
-#ifndef NO_ACTION_ONESHOT
-    const uint8_t mods = get_mods() | get_oneshot_mods();
-#else
-    const uint8_t mods = get_mods();
-#endif // NO_ACTION_ONESHOT
-
-    if (!caps_word_active) {
-        // Pressing both shift keys at the same time enables caps word.
-        if ((mods & MOD_MASK_SHIFT) == MOD_MASK_SHIFT) {
-            caps_word_set(true); // Activate Caps Word.
-            return false;
-        }
-        return true;
-    } else {
-#if CAPS_WORD_IDLE_TIMEOUT > 0
-        idle_timer = record->event.time + CAPS_WORD_IDLE_TIMEOUT;
-#endif // CAPS_WORD_IDLE_TIMEOUT > 0
-    }
-
-    if (!record->event.pressed) {
-        return true;
-    }
-
-    if (!(mods & ~MOD_MASK_SHIFT)) {
-        switch (keycode) {
-            // Ignore MO, TO, TG, TT, and OSL layer switch keys.
-            case QK_MOMENTARY ... QK_MOMENTARY_MAX:
-            case QK_TO ... QK_TO_MAX:
-            case QK_TOGGLE_LAYER ... QK_TOGGLE_LAYER_MAX:
-            case QK_LAYER_TAP_TOGGLE ... QK_LAYER_TAP_TOGGLE_MAX:
-            case QK_ONE_SHOT_LAYER ... QK_ONE_SHOT_LAYER_MAX:
-                return true;
-
-#ifndef NO_ACTION_TAPPING
-            case QK_MOD_TAP ... QK_MOD_TAP_MAX:
-                if (record->tap.count == 0) {
-                    // Deactivate if a mod becomes active through holding a mod-tap key.
-                    caps_word_set(false);
-                    return true;
-                }
-                keycode &= 0xff;
-                break;
-
-#    ifndef NO_ACTION_LAYER
-            case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
-#    endif // NO_ACTION_LAYER
-                if (record->tap.count == 0) {
-                    return true;
-                }
-                keycode &= 0xff;
-                break;
-#endif // NO_ACTION_TAPPING
-
-#ifdef SWAP_HANDS_ENABLE
-            case QK_SWAP_HANDS ... QK_SWAP_HANDS_MAX:
-                if (keycode > 0x56F0 || record->tap.count == 0) {
-                    return true;
-                }
-                keycode &= 0xff;
-                break;
-#endif // SWAP_HANDS_ENABLE
-        }
-
-        if (caps_word_press_user(keycode)) {
-            return true;
-        }
-    }
-
-    caps_word_set(false); // Deactivate Caps Word.
-    return true;
-}
-
-void caps_word_set(bool active) {
-    if (active != caps_word_active) {
-        if (active) {
-            clear_mods();
-#ifndef NO_ACTION_ONESHOT
-            clear_oneshot_mods();
-#endif // NO_ACTION_ONESHOT
-#if CAPS_WORD_IDLE_TIMEOUT > 0
-            idle_timer = timer_read() + CAPS_WORD_IDLE_TIMEOUT;
-#endif // CAPS_WORD_IDLE_TIMEOUT > 0
-        } else if ((get_weak_mods() & MOD_BIT(KC_LSFT)) != 0) {
-            // If the weak shift mod is still on, turn it off and send an update to
-            // the host computer.
-            del_weak_mods(MOD_BIT(KC_LSFT));
-            send_keyboard_report();
-        }
-
-        caps_word_active = active;
-        caps_word_set_user(active);
-    }
-}
-
-bool caps_word_get(void) {
-    return caps_word_active;
-}
-
-__attribute__((weak)) void caps_word_set_user(bool active) {}
-
-__attribute__((weak)) bool caps_word_press_user(uint16_t keycode) {
-    switch (keycode) {
-        // Keycodes that continue Caps Word, with shift applied.
-        case KC_A ... KC_Z:
-            add_weak_mods(MOD_BIT(KC_LSFT)); // Apply shift to the next key.
-            return true;
-
-        // Keycodes that continue Caps Word, without shifting.
-        case KC_1 ... KC_0:
-        case KC_BSPC:
-        case KC_MINS:
-        case KC_UNDS:
-            return true;
-
-        default:
-            return false; // Deactivate Caps Word.
-    }
-}

users/drashna/keyrecords/caps_word.h

@@ -1,85 +0,0 @@
-// Copyright 2021 Google LLC.
-// SPDX-License-Identifier: Apache-2.0
-
-#pragma once
-
-#include "drashna.h"
-
-// Call this function from `process_record_user()` to implement Caps Word.
-bool process_caps_word(uint16_t keycode, keyrecord_t* record);
-
-// If CAPS_WORD_IDLE_TIMEOUT is set, call `caps_word_task()` from
-// `matrix_scan_user()` as described above.
-//
-// If CAPS_WORD_IDLE_TIMEOUT isn't set, calling this function has no effect (but
-// will still compile).
-#if CAPS_WORD_IDLE_TIMEOUT > 0
-void caps_word_task(void);
-#else
-static inline void caps_word_task(void) {}
-#endif
-
-// Activates or deactivates Caps Word. For instance activate Caps Word with a
-// combo by defining a `COMBO_ACTION` that calls `caps_word_set(true)`:
-//
-// void process_combo_event(uint16_t combo_index, bool pressed) {
-//   switch(combo_index) {
-//     case CAPS_COMBO:
-//       if (pressed) {
-//         caps_word_set(true);  // Activate Caps Word.
-//       }
-//       break;
-//
-//     // Other combos...
-//   }
-// }
-void caps_word_set(bool active);
-
-// Returns whether Caps Word is currently active.
-bool caps_word_get(void);
-
-// An optional callback that gets called when Caps Word turns on or off. This is
-// useful to represent the current Caps Word state, e.g. by setting an LED or
-// playing a sound. In your keymap, define
-//
-//   void caps_word_set_user(bool active) {
-//     if (active) {
-//       // Do something when Caps Word activates.
-//     } else {
-//       // Do something when Caps Word deactivates.
-//     }
-//   }
-void caps_word_set_user(bool active);
-
-// An optional callback which is called on every key press while Caps Word is
-// active. When the key should be shifted (that is, a letter key), the callback
-// should call `add_weak_mods(MOD_BIT(KC_LSFT))` to shift the key. The callback
-// also determines whether the key should continue Caps Word. Returning true
-// continues the current "word", while returning false is "word breaking" and
-// deactivates Caps Word. The default callback is
-//
-//   bool caps_word_press_user(uint16_t keycode) {
-//     switch (keycode) {
-//       // Keycodes that continue Caps Word, with shift applied.
-//       case KC_A ... KC_Z:
-//         add_weak_mods(MOD_BIT(KC_LSFT));  // Apply shift to the next key.
-//         return true;
-//
-//       // Keycodes that continue Caps Word, without shifting.
-//       case KC_1 ... KC_0:
-//       case KC_BSPC:
-//       case KC_MINS:
-//       case KC_UNDS:
-//         return true;
-//
-//       default:
-//         return false;  // Deactivate Caps Word.
-//     }
-//   }
-//
-// To customize, copy the above function into your keymap and add/remove
-// keycodes to the above cases.
-//
-// NOTE: Outside of this callback, you can use `caps_word_set(false)` to
-// deactivate Caps Word.
-bool caps_word_press_user(uint16_t keycode);

users/drashna/keyrecords/keycodes.md

@@ -5,14 +5,9 @@ Keycodes are defined in the `process_record.h` file and need to be included in t
 
 A bunch of macros are present and are only included on boards that are not the Ergodox EZ or Orthodox, as they are not needed for those boards. 
 
-* `KC_MAKE` - outputs `qmk compile -kb (keyboard) -km (keymap)` and enter, to start compiling the currenct keyboard.  This uses generated variables to always use the current keyboard and keymap.  Will work with any keyboard and any keymap.
-  * If you are holding shift, it will use `qmk flash` instead of `qmk compile`.
-  * If `MAKE_BOOTLOADER` is defined, it will always use `qmk flash` instead of `qmk compile`.
 * `DEFAULT_LAYER_1` ... `DEFAULT_LAYER_4` - This sets layer 0-3 as the default layer, and writes that to eeprom, and plays a chime. 
 * `VRSN`, outputs the keyboard, keymap, commit and date info.  Eg:
   * `handwired/tractyl_manuform/5x6_right/f411/drashna @ 0.15.9-162-g087d08, Built on: 2021-12-19-21:10:26`
 *  `KC_DIABLO_CLEAR` - clears the diablo tapdance status.
 * `KC_CCCV` - Copy on hold, paste on tap.
 * `KEYLOCK` - This unloads the host driver, and prevents any data from being sent to the host. Hitting it again loads the driver, back. 
-* `REBOOT` - Uses watchdog timer on AVR, and `NVIC_SystemReset()` on ChibiOS to reset the board, without jumping to the bootloader.
-* `EEP_RST` - Overrides the default behavior, disables EEPROM (which will trigger a reset on init), and reboots the keyboard as per `REBOOT` keycode. 

users/drashna/keyrecords/process_records.c

@@ -3,9 +3,6 @@
 
 #include "drashna.h"
 #include "version.h"
-#ifdef CAPS_WORD_ENABLE
-#    include "caps_word.h"
-#endif
 #ifdef AUTOCORRECTION_ENABLE
 #    include "autocorrection/autocorrection.h"
 #endif
@@ -37,6 +34,15 @@ __attribute__((weak)) bool process_record_secrets(uint16_t keycode, keyrecord_t
  * @return false Stop process keycode and do not send to host
  */
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+#ifdef ENCODER_ENABLE // some debouncing for weird issues
+    if (IS_ENCODEREVENT(record->event)) {
+        static bool ignore_first = true;
+        if (ignore_first) {
+            ignore_first = false;
+            return false;
+        }
+    }
+#endif
     // If console is enabled, it will print the matrix position and status of each key pressed
 #ifdef KEYLOGGER_ENABLE
     uprintf("KL: kc: 0x%04X, col: %2u, row: %2u, pressed: %b, time: %5u, int: %b, count: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed, record->event.time, record->tap.interrupted, record->tap.count);
@@ -58,9 +64,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 #if defined(CUSTOM_POINTING_DEVICE)
           && process_record_pointing(keycode, record)
 #endif
-#ifdef CAPS_WORD_ENABLE
-          && process_caps_word(keycode, record)
-#endif
 #ifdef AUTOCORRECTION_ENABLE
           && process_autocorrection(keycode, record)
 #endif
@@ -87,33 +90,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             }
             break;
 
-        case KC_MAKE:  // Compiles the firmware, and adds the flash command based on keyboard bootloader
-            if (!record->event.pressed) {
-#ifndef MAKE_BOOTLOADER
-                uint8_t temp_mod = mod_config(get_mods());
-                uint8_t temp_osm = mod_config(get_oneshot_mods());
-                clear_mods();
-                clear_oneshot_mods();
-#endif
-                send_string_with_delay_P(PSTR("qmk"), TAP_CODE_DELAY);
-#ifndef MAKE_BOOTLOADER
-                if ((temp_mod | temp_osm) & MOD_MASK_SHIFT)
-#endif
-                {
-                    send_string_with_delay_P(PSTR(" flash "), TAP_CODE_DELAY);
-#ifndef MAKE_BOOTLOADER
-                } else {
-                    send_string_with_delay_P(PSTR(" compile "), TAP_CODE_DELAY);
-#endif
-                }
-                send_string_with_delay_P(PSTR("-kb " QMK_KEYBOARD " -km " QMK_KEYMAP), TAP_CODE_DELAY);
-#ifdef CONVERT_TO_PROTON_C
-                send_string_with_delay_P(PSTR(" -e CTPC=yes"), TAP_CODE_DELAY);
-#endif
-                send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), TAP_CODE_DELAY);
-            }
-            break;
-
         case VRSN:  // Prints firmware version
             if (record->event.pressed) {
                 send_string_with_delay_P(PSTR(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE), TAP_CODE_DELAY);
@@ -148,13 +124,19 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
                 dprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
                 eeconfig_update_user(userspace_config.raw);
                 if (userspace_config.rgb_layer_change) {
-#    if defined(CUSTOM_RGBLIGHT) && defined(CUSTOM_RGB_MATRIX)
+#    if defined(CUSTOM_RGB_MATRIX)
+                    rgb_matrix_set_flags(LED_FLAG_UNDERGLOW | LED_FLAG_KEYLIGHT | LED_FLAG_INDICATOR);
+#        if defined(CUSTOM_RGBLIGHT)
                     rgblight_enable_noeeprom();
+#        endif
 #    endif
                     layer_state_set(layer_state); // This is needed to immediately set the layer color (looks better)
-#    if defined(CUSTOM_RGBLIGHT) && defined(CUSTOM_RGB_MATRIX)
+#    if defined(CUSTOM_RGB_MATRIX)
                 } else {
+                    rgb_matrix_set_flags(LED_FLAG_ALL);
+#        if defined(CUSTOM_RGBLIGHT)
                     rgblight_disable_noeeprom();
+#        endif
 #    endif
                 }
             }
@@ -218,22 +200,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             }
             break;
         }
-        case EEP_RST:
-            if (record->event.pressed) {
-                eeconfig_disable();
-                shutdown_user();
-#ifdef __AVR__
-                wdt_enable(WDTO_250MS);
-#else
-                NVIC_SystemReset();
-#endif
-            }
-            return false;
-        case REBOOT:
-            if (record->event.pressed) {
-                software_reset();
-            }
-            return false;
      }
     return true;
 }

users/drashna/keyrecords/process_records.h

@@ -21,7 +21,6 @@ enum userspace_custom_keycodes {
     KC_DVORAK,                                // Sets default layer to DVORAK
     LAST_DEFAULT_LAYER_KEYCODE = KC_DVORAK,   // Sets default layer to WORKMAN
     KC_DIABLO_CLEAR,                          // Clears all Diablo Timers
-    KC_MAKE,                                  // Run keyboard's customized make command
     KC_RGB_T,                                 // Toggles RGB Layer Indication mode
     RGB_IDL,                                  // RGB Idling animations
     KC_SECRET_1,                              // test1
@@ -46,8 +45,9 @@ enum userspace_custom_keycodes {
     KC_AUSSIE,
     KC_ZALGO,
     KC_ACCEL,
-    AUTO_CTN,                                 // Toggle Autocorrect status
+    AUTOCORRECT_ON,
-    REBOOT,
+    AUTOCORRECT_OFF,
+    AUTOCORRECT_TOGGLE,
     NEW_SAFE_RANGE                            // use "NEWPLACEHOLDER for keymap specific codes
 };
 
@@ -95,9 +95,6 @@ bool process_record_unicode(uint16_t keycode, keyrecord_t *record);
 #    endif
 #endif
 
-#define KC_RESET RESET
-#define KC_RST   KC_RESET
-
 #ifdef SWAP_HANDS_ENABLE
 #    define KC_C1R3 SH_T(KC_TAB)
 #elif defined(DRASHNA_LP)
@@ -130,7 +127,7 @@ bool process_record_unicode(uint16_t keycode, keyrecord_t *record);
 
 #define MG_NKRO MAGIC_TOGGLE_NKRO
 
-
+#define AUTO_CTN AUTOCORRECT_TOGGLE
 /*
 Custom Keycodes for Diablo 3 layer
 But since TD() doesn't work when tap dance is disabled

users/drashna/keyrecords/secrets.md

@@ -24,14 +24,12 @@ secrets.h
 Here is the magic. This handles including the "secrets", and adding the custom macros to send them. 
 
 ```c
-#include "drashna.h"  // replace with your keymap's "h" file, or whatever file stores the keycodes
+#include QMK_KEYBOARD_H
 
 #if (__has_include("secrets.h") && !defined(NO_SECRETS))
 #include "secrets.h"
 #else
-// `PROGMEM const char secret[][x]` may work better, but it takes up more space in the firmware
+static const char * const secrets[] = {
-// And I'm not familiar enough to know which is better or why...
-static const char * const secret[] = {
   "test1",
   "test2",
   "test3",
@@ -43,9 +41,10 @@ static const char * const secret[] = {
 bool process_record_secrets(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
     case KC_SECRET_1 ... KC_SECRET_5: // Secrets!  Externally defined strings, not stored in repo
-      if (!record->event.pressed) {
+      if (record->event.pressed) {
-        clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED);
+        clear_mods();
-        send_string_with_delay(secret[keycode - KC_SECRET_1], MACRO_TIMER);
+        clear_oneshot_mods();
+        send_string_with_delay(secrets[keycode - KC_SECRET_1], MACRO_TIMER);
       }
       return false;
       break;
@@ -96,7 +95,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
 Here, you want your `/users/<name>/rules.mk` file to "detect" the existence of the `secrets.c` file, and only add it if the file exists.  
 
-Additionally, to ensure that it's not added or processed in any way, it checks to see if `NO_SECRETS` is set. This way, if you run `make keyboard:name NO_SECRETS=yes`, it will remove the feature altogether. 
+Additionally, to ensure that it's not added or processed in any way, it checks to see if `NO_SECRETS` is set. This way, if you run `qmk compile -kb keyboard -km name -e NO_SECRETS=yes`, it will remove the feature altogether. 
 
 ```make
 ifneq ($(strip $(NO_SECRETS)), yes)

users/drashna/keyrecords/unicode.c

@@ -4,9 +4,10 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
 #include "drashna.h"
+#include "unicode.h"
 #include "process_unicode_common.h"
 
-uint16_t typing_mode = KC_NOMODE;
+uint8_t typing_mode = UCTM_NO_MODE;
 
 /**
  * @brief Registers the unicode keystrokes based on desired unicode
@@ -242,10 +243,10 @@ bool process_record_unicode(uint16_t keycode, keyrecord_t *record) {
             break;
         case KC_NOMODE ... KC_ZALGO:
             if (record->event.pressed) {
-                if (typing_mode != keycode) {
+                if (typing_mode != keycode - KC_NOMODE) {
-                    typing_mode = keycode;
+                    typing_mode = keycode - KC_NOMODE;
                 } else {
-                    typing_mode = KC_NOMODE;
+                    typing_mode = UCTM_NO_MODE;
                 }
             }
             break;
@@ -259,19 +260,19 @@ bool process_record_unicode(uint16_t keycode, keyrecord_t *record) {
         keycode &= 0xFF;
     }
 
-    if (typing_mode == KC_WIDE) {
+    if (typing_mode == UCTM_WIDE) {
         if (((KC_A <= keycode) && (keycode <= KC_0)) || keycode == KC_SPACE) {
             return process_record_glyph_replacement(keycode, record, unicode_range_translator_wide);
         }
-    } else if (typing_mode == KC_SCRIPT) {
+    } else if (typing_mode == UCTM_SCRIPT) {
         if (((KC_A <= keycode) && (keycode <= KC_0)) || keycode == KC_SPACE) {
             return process_record_glyph_replacement(keycode, record, unicode_range_translator_script);
         }
-    } else if (typing_mode == KC_BLOCKS) {
+    } else if (typing_mode == UCTM_BLOCKS) {
         if (((KC_A <= keycode) && (keycode <= KC_0)) || keycode == KC_SPACE) {
             return process_record_glyph_replacement(keycode, record, unicode_range_translator_boxes);
         }
-    } else if (typing_mode == KC_REGIONAL) {
+    } else if (typing_mode == UCTM_REGIONAL) {
         if (((KC_A <= keycode) && (keycode <= KC_0)) || keycode == KC_SPACE) {
             if (!process_record_glyph_replacement(keycode, record, unicode_range_translator_regional)) {
                 wait_us(500);
@@ -279,9 +280,9 @@ bool process_record_unicode(uint16_t keycode, keyrecord_t *record) {
                 return false;
             }
         }
-    } else if (typing_mode == KC_AUSSIE) {
+    } else if (typing_mode == UCTM_AUSSIE) {
         return process_record_aussie(keycode, record);
-    } else if (typing_mode == KC_ZALGO) {
+    } else if (typing_mode == UCTM_ZALGO) {
         return process_record_zalgo(keycode, record);
     }
     return true;

users/drashna/keyrecords/unicode.h

@@ -0,0 +1,16 @@
+// Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+enum unicode_typing_mode {
+    UCTM_NO_MODE,
+    UCTM_WIDE,
+    UCTM_SCRIPT,
+    UCTM_BLOCKS,
+    UCTM_REGIONAL,
+    UCTM_AUSSIE,
+    UCTM_ZALGO,
+};
+
+extern uint8_t typing_mode;

users/drashna/oled/oled_stuff.c

@@ -18,10 +18,14 @@
 #include "drashna.h"
 #ifdef UNICODE_COMMON_ENABLE
 #    include "process_unicode_common.h"
+#    include "keyrecords/unicode.h"
 #endif
 #ifdef AUDIO_CLICKY
 #    include "process_clicky.h"
 #endif
+#if defined(AUTOCORRECTION_ENABLE)
+#    include "keyrecords/autocorrection/autocorrection.h"
+#endif
 #include <string.h>
 
 extern bool host_driver_disabled;
@@ -100,12 +104,15 @@ void add_keylog(uint16_t keycode, keyrecord_t *record) {
  */
 bool process_record_user_oled(uint16_t keycode, keyrecord_t *record) {
     if (record->event.pressed) {
-        oled_timer = timer_read32();
+        oled_timer_reset();
         add_keylog(keycode, record);
     }
     return true;
 }
 
+void oled_timer_reset(void) {
+    oled_timer = timer_read32();
+}
 /**
  * @brief Renders keylogger buffer to oled
  *
@@ -262,7 +269,6 @@ void render_layer_state(void) {
         }
     };
 
-
     // clang-format on
     uint8_t layer_is[4] = {0, 4, 4, 4};
     if (layer_state_is(_ADJUST)) {
@@ -280,7 +286,6 @@ void render_layer_state(void) {
         layer_is[2] = 5;
     }
 
-
     oled_set_cursor(1, 2);
     oled_write_raw_P(tri_layer_image[layer_is[0]][0], sizeof(tri_layer_image[0][0]));
     oled_set_cursor(5, 2);
@@ -322,7 +327,7 @@ void render_layer_state(void) {
  *
  * @param led_usb_state Current keyboard led state
  */
-void render_keylock_status(uint8_t led_usb_state) {
+void render_keylock_status(led_t led_usb_state) {
 #if defined(OLED_DISPLAY_VERBOSE)
     oled_set_cursor(1, 6);
 #endif
@@ -330,12 +335,12 @@ void render_keylock_status(uint8_t led_usb_state) {
 #if !defined(OLED_DISPLAY_VERBOSE)
     oled_write_P(PSTR(" "), false);
 #endif
-    oled_write_P(PSTR(OLED_RENDER_LOCK_NUML), led_usb_state & (1 << USB_LED_NUM_LOCK));
+    oled_write_P(PSTR(OLED_RENDER_LOCK_NUML), led_usb_state.num_lock);
     oled_write_P(PSTR(" "), false);
-    oled_write_P(PSTR(OLED_RENDER_LOCK_CAPS), led_usb_state & (1 << USB_LED_CAPS_LOCK));
+    oled_write_P(PSTR(OLED_RENDER_LOCK_CAPS), led_usb_state.caps_lock);
 #if defined(OLED_DISPLAY_VERBOSE)
     oled_write_P(PSTR(" "), false);
-    oled_write_P(PSTR(OLED_RENDER_LOCK_SCLK), led_usb_state & (1 << USB_LED_SCROLL_LOCK));
+    oled_write_P(PSTR(OLED_RENDER_LOCK_SCLK), led_usb_state.scroll_lock);
 #endif
 }
 
@@ -417,15 +422,14 @@ void render_bootmagic_status(void) {
         oled_write_P(logo[0][0], !is_bootmagic_on);
     }
 #ifndef OLED_DISPLAY_VERBOSE
-    oled_write_P(PSTR(" "), false);
     oled_write_P(logo[1][1], is_bootmagic_on);
     oled_write_P(logo[0][1], !is_bootmagic_on);
 #endif
     oled_write_P(PSTR(" "), false);
     oled_write_P(PSTR(OLED_RENDER_BOOTMAGIC_NKRO), keymap_config.nkro);
     oled_write_P(PSTR(" "), false);
-#ifdef AUTOCORRECTION_ENABLE
+#if defined(AUTOCORRECTION_ENABLE) || defined(AUTOCORRECT_ENABLE)
-    oled_write_P(PSTR("CRCT"), userspace_config.autocorrection);
+    oled_write_P(PSTR("CRCT"), autocorrect_is_enabled());
     oled_write_P(PSTR(" "), false);
 #else
     oled_write_P(PSTR(OLED_RENDER_BOOTMAGIC_NOGUI), keymap_config.no_gui);
@@ -439,7 +443,7 @@ void render_bootmagic_status(void) {
     }
 #endif
     oled_write_P(PSTR(" "), false);
-    oled_write_P(PSTR(OLED_RENDER_BOOTMAGIC_ONESHOT), !is_oneshot_enabled());
+    oled_write_P(PSTR(OLED_RENDER_BOOTMAGIC_ONESHOT), is_oneshot_enabled());
 #ifdef SWAP_HANDS_ENABLE
     oled_write_P(PSTR(" "), false);
     oled_write_P(PSTR(OLED_RENDER_BOOTMAGIC_SWAP), swap_hands);
@@ -577,19 +581,10 @@ void render_wpm_graph(uint8_t max_lines_graph, uint8_t vertical_offset) {
             }
         }
 #    endif
-        oled_pan(false);  // then move the entire graph one pixel to the right
+#    include <math.h>
-        static const char PROGMEM display_border[3] = {0x0, 0xFF, 0x0};
+        uint8_t y_start  = ceil(vertical_offset / 8);
-        for (uint8_t i = 0; i < 7; i++) {
+        uint8_t y_length = y_start + ceil(max_lines_graph / 8);
-            oled_set_cursor(0, i + 8);
+        oled_pan_section(false, y_start, y_length, 3, 125); // then move the entire graph one pixel to the right
-            oled_write_raw_P(display_border, sizeof(display_border));
-            oled_set_cursor(21, i + 8);
-            oled_write_raw_P(display_border, sizeof(display_border));
-        }
-        static const char PROGMEM footer_image[] = {0, 3, 4, 8, 16, 32, 64, 128, 128, 128, 128, 128, 128, 128, 192, 224, 240, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 240, 224, 192, 128, 128, 128, 128, 128, 128, 128, 64, 32, 16, 8, 4, 3, 0};
-        oled_set_cursor(0, 15);
-
-        oled_write_raw_P(footer_image, sizeof(footer_image));
-
         timer = timer_read();                               // refresh the timer for the next iteration
     }
 #endif
@@ -782,24 +777,12 @@ void oled_driver_render_logo_left(void) {
     render_pointing_dpi_status(charybdis_get_pointer_sniping_enabled() ? charybdis_get_pointer_sniping_dpi() : charybdis_get_pointer_default_dpi(), 1);
 
     // credit and thanks to jaspertandy on discord for these images
-    static const char PROGMEM mouse_logo[3][2][16] = {
+    static const char PROGMEM mouse_logo[3][2][16] = {// mouse icon
-        // mouse icon
+                                                      {{0, 0, 0, 252, 2, 2, 2, 58, 2, 2, 2, 252, 0, 0, 0, 0}, {0, 0, 63, 96, 64, 64, 64, 64, 64, 64, 64, 96, 63, 0, 0, 0}},
-        {
-            {   0,   0,   0, 252,   2,   2,   2,  58,   2,   2,   2, 252,   0,   0,   0,   0 },
-            {   0,   0,  63,  96,  64,  64,  64,  64,  64,  64,  64,  96,  63,   0,   0,   0 }
-        },
                                                       // crosshair icon
-        {
+                                                      {{128, 240, 136, 228, 146, 138, 202, 127, 202, 138, 146, 228, 136, 240, 128, 0}, {0, 7, 8, 19, 36, 40, 41, 127, 41, 40, 36, 19, 8, 7, 0, 0}},
-            { 128, 240, 136, 228, 146, 138, 202, 127, 202, 138, 146, 228, 136, 240, 128,   0 },
-            {   0,   7,   8,  19,  36,  40,  41, 127,  41,  40,  36,  19,   8,   7,   0,   0 }
-        },
                                                       // dragscroll icon
-        {
+                                                      {{0, 0, 112, 136, 156, 2, 15, 1, 15, 2, 140, 68, 56, 0, 0, 0}, {0, 0, 2, 6, 15, 28, 60, 124, 60, 28, 15, 6, 2, 0, 0, 0}}};
-            {   0,   0, 112, 136, 156,   2,  15,   1,  15,   2, 140,  68,  56,   0,   0,   0 },
-            {   0,   0,   2,   6,  15,  28,  60, 124,  60,  28,  15,   6,   2,   0,   0,   0 }
-        }
-    };
-
 
     uint8_t image_index = 0;
 #        ifdef OLED_DISPLAY_TEST
@@ -847,7 +830,7 @@ void render_status_right(void) {
 #if !defined(OLED_DISPLAY_VERBOSE) && defined(WPM_ENABLE) && !defined(CONVERT_TO_PROTON_C)
     render_wpm(2);
 #endif
-    render_keylock_status(host_keyboard_leds());
+    render_keylock_status(host_keyboard_led_state());
 }
 
 void render_status_left(void) {
@@ -860,9 +843,11 @@ void render_status_left(void) {
     render_keylogger_status();
 }
 
-__attribute__((weak)) void oled_render_large_display(void) {}
+__attribute__((weak)) void oled_render_large_display(bool side) {}
 
-__attribute__((weak)) oled_rotation_t oled_init_keymap(oled_rotation_t rotation) { return rotation; }
+__attribute__((weak)) oled_rotation_t oled_init_keymap(oled_rotation_t rotation) {
+    return rotation;
+}
 
 oled_rotation_t oled_init_user(oled_rotation_t rotation) {
     if (is_keyboard_master()) {
@@ -876,10 +861,11 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) {
     return oled_init_keymap(rotation);
 }
 
-__attribute__((weak)) bool oled_task_keymap(void) { return true; }
+__attribute__((weak)) bool oled_task_keymap(void) {
+    return true;
+}
 
 bool oled_task_user(void) {
-
     if (is_keyboard_master()) {
 #ifndef OLED_DISPLAY_TEST
         if (timer_elapsed32(oled_timer) > 60000) {
@@ -896,29 +882,29 @@ bool oled_task_user(void) {
         return false;
     }
 
-#if defined(OLED_DISPLAY_128X128)
-    oled_set_cursor(0, 7);
-    oled_render_large_display();
-#endif
-
 #if defined(OLED_DISPLAY_VERBOSE)
     static const char PROGMEM header_image[] = {
         0, 192, 32, 16, 8, 4, 2, 1, 1, 1, 1, 1, 1, 1, 1, 3, 7, 15, 31, 63, 127, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 127, 63, 31, 15, 7, 3, 1, 1, 1, 1, 1, 1, 1, 1, 2, 4, 8, 16, 32, 192, 0,
         //         0,255,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  3,  7, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  7,  3,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,255,  0
     };
-    static const char PROGMEM footer_image[] = {0, 3, 4, 8, 16, 32, 64, 128, 128, 128, 128, 128, 128, 128, 192, 224, 240, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 240, 224, 192, 128, 128, 128, 128, 128, 128, 128, 64, 32, 16, 8, 4, 3, 0};
-    oled_set_cursor(0, 0);
     oled_write_raw_P(header_image, sizeof(header_image));
-    oled_set_cursor(0, 1);
 #endif
 
 #ifndef OLED_DISPLAY_TEST
     if (is_keyboard_left()) {
 #endif
         render_status_left();
+#if defined(OLED_DISPLAY_128X128)
+        oled_set_cursor(0, 7);
+        oled_render_large_display(true);
+#endif
 #ifndef OLED_DISPLAY_TEST
     } else {
         render_status_right();
+#    if defined(OLED_DISPLAY_128X128)
+        oled_set_cursor(0, 7);
+        oled_render_large_display(false);
+#    endif
     }
 #endif
 
@@ -936,6 +922,7 @@ bool oled_task_user(void) {
         oled_write_raw_P(display_border, sizeof(display_border));
     }
 
+    static const char PROGMEM footer_image[] = {0, 3, 4, 8, 16, 32, 64, 128, 128, 128, 128, 128, 128, 128, 192, 224, 240, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 240, 224, 192, 128, 128, 128, 128, 128, 128, 128, 64, 32, 16, 8, 4, 3, 0};
     oled_set_cursor(0, num_of_rows);
     oled_write_raw_P(footer_image, sizeof(footer_image));
 #endif

users/drashna/oled/oled_stuff.h

@@ -23,11 +23,11 @@ extern deferred_token kittoken;
 void            oled_driver_render_logo(void);
 bool            process_record_user_oled(uint16_t keycode, keyrecord_t *record);
 oled_rotation_t oled_init_keymap(oled_rotation_t rotation);
-extern uint32_t oled_timer;
+void            oled_timer_reset(void);
 void            render_keylogger_status(void);
 void            render_default_layer_state(void);
 void            render_layer_state(void);
-void            render_keylock_status(uint8_t led_usb_state);
+void            render_keylock_status(led_t led_usb_state);
 void            render_matrix_scan_rate(uint8_t padding);
 void            render_mod_status(uint8_t modifiers);
 void            render_bootmagic_status(void);
@@ -37,9 +37,12 @@ void            render_wpm(uint8_t padding);
 void            render_pointing_dpi_status(uint16_t cpi, uint8_t padding);
 void            oled_driver_render_logo_left(void);
 void            oled_driver_render_logo_right(void);
-void            oled_render_large_display(void);
+void            oled_render_large_display(bool side);
 void render_wpm_graph(uint8_t max_lines_graph, uint8_t vertical_offset);
 
+void oled_pan_section(bool left, uint16_t y_start, uint16_t y_end, uint16_t x_start, uint16_t x_end);
+
+
 #if defined(OLED_DISPLAY_128X128) || defined(OLED_DISPLAY_128X64)
 #    define OLED_DISPLAY_VERBOSE
 

users/drashna/oled/sh110x.c

@@ -521,6 +521,25 @@ void oled_pan(bool left) {
     oled_dirty = OLED_ALL_BLOCKS_MASK;
 }
 
+void oled_pan_section(bool left, uint16_t y_start, uint16_t y_end, uint16_t x_start, uint16_t x_end) {
+    uint16_t i = 0;
+    for (uint16_t y = y_start; y < y_end; y++) {
+        if (left) {
+            for (uint16_t x = x_start; x < x_end - 1; x++) {
+                i              = y * OLED_DISPLAY_WIDTH + x;
+                oled_buffer[i] = oled_buffer[i + 1];
+                oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
+            }
+        } else {
+            for (uint16_t x = x_end - 1; x > 0; x--) {
+                i              = y * OLED_DISPLAY_WIDTH + x;
+                oled_buffer[i] = oled_buffer[i - 1];
+                oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
+            }
+        }
+    }
+}
+
 oled_buffer_reader_t oled_read_raw(uint16_t start_index) {
     if (start_index > OLED_MATRIX_SIZE) start_index = OLED_MATRIX_SIZE;
     oled_buffer_reader_t ret_reader;

users/drashna/pointing/pointing.c

@@ -29,7 +29,7 @@ report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) {
     if (x != 0 && y != 0) {
         mouse_timer = timer_read();
 #ifdef OLED_ENABLE
-        oled_timer = timer_read32();
+        oled_timer_reset();
 #endif
         if (timer_elapsed(mouse_debounce_timer) > TAP_CHECK) {
             if (enable_acceleration) {
@@ -94,8 +94,10 @@ bool process_record_pointing(uint16_t keycode, keyrecord_t* record) {
             record->event.pressed ? mouse_keycode_tracker++ : mouse_keycode_tracker--;
             mouse_timer = timer_read();
             break;
+#if 0
         case QK_ONE_SHOT_MOD ... QK_ONE_SHOT_MOD_MAX:
             break;
+#endif
         case QK_MOD_TAP ... QK_MOD_TAP_MAX:
             if (record->event.pressed || !record->tap.count) {
                 break;

users/drashna/rgb/rgb_matrix_stuff.c

@@ -57,6 +57,9 @@ void keyboard_post_init_rgb_matrix(void) {
         rgb_matrix_mode_noeeprom(RGB_MATRIX_REST_MODE);
     }
 #endif
+    if (userspace_config.rgb_layer_change) {
+        rgb_matrix_set_flags(LED_FLAG_UNDERGLOW | LED_FLAG_KEYLIGHT | LED_FLAG_INDICATOR);
+    }
 }
 
 bool process_record_user_rgb_matrix(uint16_t keycode, keyrecord_t *record) {

users/drashna/rules.mk

@@ -13,8 +13,9 @@ GRAVE_ESC_ENABLE      = no
 # DEBUG_MATRIX_SCAN_RATE_ENABLE = api
 
 ifneq ($(strip $(NO_SECRETS)), yes)
-    ifneq ("$(wildcard $(USER_PATH)/keyrecords/secrets.c)","")
+    ifneq ("$(wildcard $(USER_PATH)/../../../qmk_secrets/secrets.c)","")
-        SRC += $(USER_PATH)/keyrecords/secrets.c
+        SRC += $(USER_PATH)/../../../qmk_secrets/secrets.c
+        SECURE_ENABLE = yes
     endif
     ifeq ($(strip $(NO_SECRETS)), lite)
         OPT_DEFS += -DNO_SECRETS
@@ -102,6 +103,7 @@ ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
     ifeq ($(strip $(CUSTOM_POINTING_DEVICE)), yes)
         SRC += $(USER_PATH)/pointing/pointing.c
         OPT_DEFS += -DCUSTOM_POINTING_DEVICE
+        OPT_DEFS += -DMOUSE_EXT_REPORT
     endif
 endif
 
@@ -119,9 +121,3 @@ ifeq ($(strip $(AUTOCORRECTION_ENABLE)), yes)
     SRC += $(USER_PATH)/keyrecords/autocorrection/autocorrection.c
     OPT_DEFS += -DAUTOCORRECTION_ENABLE
 endif
-
-CAPS_WORD_ENABLE ?= no
-ifeq ($(strip $(CAPS_WORD_ENABLE)), yes)
-    SRC += $(USER_PATH)/keyrecords/caps_word.c
-    OPT_DEFS += -DCAPS_WORD_ENABLE
-endif

users/drashna/split/transport_sync.c

@@ -11,6 +11,7 @@
 #ifdef UNICODE_COMMON_ENABLE
 #    include "process_unicode_common.h"
 extern unicode_config_t unicode_config;
+#    include "keyrecords/unicode.h"
 #endif
 #ifdef AUDIO_ENABLE
 #    include "audio.h"
@@ -97,6 +98,7 @@ void user_transport_update(void) {
 #endif
 #ifdef UNICODE_COMMON_ENABLE
         user_state.unicode_mode = unicode_config.input_mode;
+        user_state.unicode_typing_mode = typing_mode;
 #endif
 #ifdef SWAP_HANDS_ENABLE
         user_state.swap_hands = swap_hands;
@@ -110,6 +112,7 @@ void user_transport_update(void) {
         user_state.raw       = transport_user_state;
 #ifdef UNICODE_COMMON_ENABLE
         unicode_config.input_mode = user_state.unicode_mode;
+        typing_mode = user_state.unicode_typing_mode;
 #endif
 #if defined(CUSTOM_POINTING_DEVICE)
         tap_toggling = user_state.tap_toggling;

users/drashna/split/transport_sync.h

@@ -18,6 +18,7 @@ typedef union {
         uint8_t unicode_mode        :3;
         bool swap_hands             :1;
         bool host_driver_disabled   :1;
+        uint8_t unicode_typing_mode :3;
     };
 } user_runtime_config_t;
 

users/drashna/template.c

@@ -25,21 +25,6 @@ __attribute__((weak)) bool process_record_keymap(uint16_t keycode, keyrecord_t *
 // And use "NEWPLACEHOLDER" for new safe range
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     switch (keycode) {
-        case KC_MAKE:
-            if (!record->event.pressed) {
-                SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP
-#if (defined(BOOTLOADER_DFU) || defined(BOOTLOADER_LUFA_DFU) || defined(BOOTLOADER_QMK_DFU))
-                            ":dfu"
-#elif defined(BOOTLOADER_HALFKAY)
-                            ":teensy"
-#elif defined(BOOTLOADER_CATERINA)
-                            ":avrdude"
-#endif
-                            SS_TAP(X_ENTER));
-            }
-            return false;
-            break;
-
         case VRSN:
             if (record->event.pressed) {
                 SEND_STRING(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);

users/drashna/template.h

@@ -12,7 +12,7 @@
 
 enum custom_keycodes {
     VRSN = SAFE_RANGE,  // can always be here
-    KC_MAKE,
+    QK_MAKE,
-    KC_RESET,
+    QK_BOOT,
     NEWPLACEHOLDER  // use "NEWPLACEHOLDER for keymap specific codes
 };