[Keyboard] Add swap hands support and readme update for Cradio (#15226)

Co-authored-by: filterpaper <filterpaper@localhost>
This commit is contained in:
Albert Y 2021-11-29 16:24:12 +08:00 committed by GitHub
parent d8324e8a9c
commit d4b07be012
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 42 additions and 2 deletions

View File

@ -2,6 +2,7 @@
* ENDO Katsuhiro <ka2hiro@curlybracket.co.jp>
* David Philip Barr <@davidphilipbarr>
* Pierre Chevalier <pierrechevalier83@gmail.com>
* @filterpaper
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -18,3 +19,20 @@
*/
#include "cradio.h"
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
// Left
{{4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}},
{{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}},
{{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}},
{{1, 7}, {0, 7}, {2, 7}, {3, 7}, {4, 7}},
// Right
{{4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
{{4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
{{4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
{{1, 3}, {0, 3}, {2, 3}, {3, 3}, {4, 3}}
};
#endif

View File

@ -8,7 +8,8 @@ Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](htt
* Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr)
* Hardware Supported:
* [Sweep](https://github.com/davidphilipbarr/Sweep) (all versions)
* [Cradio](https://github.com/davidphilipbarr/36keys/tree/master/34Keys)
* [Sweep](https://github.com/davidphilipbarr/Sweep)
* [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic)
* [Paroxysm](https://github.com/davidphilipbarr/hypergolic/tree/main/paroxysm)
* Variants of the same 34-key direct pin PCB
@ -22,7 +23,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
## Setting Handedness
Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are:
Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands are:
make cradio:default:dfu-split-left
make cradio:default:dfu-split-right
@ -36,3 +37,24 @@ Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
## Swapped Pins
If you have one of the PCB variant with swapped letters `Q` and `B` / `P` and `N`, add the following code to your keymap's `config.h` to swap pins `E6` and `D7` in the firmware:
```c
#undef DIRECT_PINS
#define DIRECT_PINS { \
{ D7, F7, F6, F5, F4 }, \
{ B1, B3, B2, B6, D3 }, \
{ D1, D0, D4, C6, E6 }, \
{ B4, B5, NO_PIN, NO_PIN, NO_PIN } \
}
#undef DIRECT_PINS_RIGHT
#define DIRECT_PINS_RIGHT { \
{ F4, F5, F6, F7, D7 }, \
{ D3, B6, B2, B3, B1 }, \
{ E6, C6, D4, D0, D1 }, \
{ B5, B4, NO_PIN, NO_PIN, NO_PIN } \
}
```