Documentation: KBD75 (#8038)

* update kbd75 readme

* update bmini readme

* update wkl.kr readme

* Update keyboards/kbdfans/kbd75/readme.md

* Update keyboards/kbdfans/kbd75/readme.md
This commit is contained in:
MechMerlin 2020-01-30 11:37:00 -08:00 committed by GitHub
parent d2e1cc4d48
commit db2f187493
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 21 additions and 9 deletions

View File

@ -4,10 +4,12 @@ Keyboard Maintainer: QMK Community
Hardware Supported: KBD75 PCB rev 1 and 2
Hardware Availability: https://kbdfans.myshopify.com/products/kbd75-keyboard-set?variant=35638534029
The KBD75 has two revisions. Revision 2 has a USB C port and allows a numpad layout. `.hex` files made
for KBD75 revision 1, will still work for revision 2. `.hex` files made for revision 2 (excluding the numpad)
will also still work on revision 1. Both revisions share the same switch matrix but have switch holes in
different areas.
The KBD75 was sold through various rounds, with various PCB changes between them.
* **Round 1 (2017)**: Black PCB - Bootmapper Client, atmega32a MCU (Use [Winkeyless.kr B.mini](../../winkeyless/bmini/) firmware)
* **Round 2 (2018)**: White PCB - Bootmapper Client, atmega32a MCU (Use [Winkeyless.kr B.mini](../../winkeyless/bmini/) firmware)
* **Round 3-5 (2018)**: White PCB - QMK Firmware, atmega32u4 MCU (Use KBD75 rev1 or rev2(without numpad support))
* **Round 6 (2019)**: White PCB with USB C - QMK Firmware, atmega32u4 MCU (Use KBD75 rev1 or rev2(with numpad support))
Make example for this keyboard (after setting up your build environment):

View File

@ -1,6 +1,8 @@
# B.mini
A 75% keyboard with RGB
A 75% keyboard with RGB underglow.
QMK Firmware is not the official firmware for the B.mini.
* Keyboard Maintainer: QMK Community
* Hardware Supported: B.mini PCB
@ -14,6 +16,8 @@ Flashing example for this keyboard ([after setting up the bootloadHID flashing e
make winkeyless/bmini:default:flash
**Reset Key**: Hold down the key located at *LOCATION*, commonly programmed as *KEY* while plugging in the keyboard.
This firmware can be flashed onto the KBDFans KBD75 Round 1 and Round 2 Bootmapper Client boards sold during the 2017 and early 2018 timeframe.
**Reset Key**: Hold down the bottom left most key located at `K00`, commonly programmed as Left Control while plugging in the keyboard.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -1,7 +1,13 @@
# Winkeyless
[Winkeyless](https://www.winkeyless.kr) is a Korean keyboard company popular for creating the Boot Mapper Client (BMC) firmware. Most Winkeyless boards were low profile and constructed out of acrylic showcasing their RGB underglow capabilities.
[Winkeyless](https://www.winkeyless.kr) is a Korean keyboard company popular for creating the Boot Mapper Client (BMC) firmware.
In late 2018, Winkeyless closed its doors due to the numerous unlicensed implementations of its hardware and software.
Winkeyless used an atmega32a MCU, mini USB B, and utilized the same MCU pins across all their PCBs. Their reset button was always
tied to pins `A0` and `B0` on the atmega32a MCU.
This directory contains official Winkeyless boards that have had QMK ported to work with them.
Most Winkeyless boards were low profile and constructed out of acrylic showcasing their RGB underglow capabilities.
In late 2018, Winkeyless closed its doors. The numerous unlicensed implementations of its hardware and software were cited as one
of many reasons for shutting down.
This directory contains official Winkeyless boards that have had QMK firmware ported to work with them.