Consolidate udev rules into a single file (#9693)

* Consolidate udev rules into a single file

* Update rules in doctor.py

* Simplify doctor rule checking

* Fix errors

* Add TMK "FEED" VID to list of deprecated udev rules

* A comma would be nice

* Split rules back up into bootloaders

* Link to docs page in "missing" case

* Add Pololu VID

* Be more specific about Caterina devices, and add LilyPad PID
This commit is contained in:
Ryan 2020-09-27 20:36:33 +10:00 committed by GitHub
commit e7acd39b78
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 100 additions and 110 deletions

View File

@ -13,65 +13,76 @@ An example of using `sudo`, when your controller is ATMega32u4:
or just:
$ sudo make <keyboard>:<keymap>:dfu
$ sudo make <keyboard>:<keymap>:flash
Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible.
### Linux `udev` Rules
On Linux, you'll need proper privileges to access the MCU. You can either use
`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`. Once added run the following:
```console
On Linux, you'll need proper privileges to communicate with the bootloader device. You can either use `sudo` when flashing firmware, or place this file in `/etc/udev/rules.d/`:
**/etc/udev/rules.d/50-qmk.rules:**
```
# Atmel DFU
SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega16U2
SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega32U2
SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega16U4
SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega32U4
SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess" # AT90USB64
SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess" # AT90USB128
# Input Club
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess"
# STM32duino
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1EAF", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
# STM32 DFU
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="DF11", TAG+="uaccess", RUN{builtin}+="uaccess"
# BootloadHID
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DF", TAG+="uaccess", RUN{builtin}+="uaccess"
# USBAspLoader
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uaccess", RUN{builtin}+="uaccess"
# ModemManager should ignore the following devices
# Atmel SAM-BA (Massdrop)
SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="6124", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
# Caterina (Pro Micro)
# Spark Fun Electronics
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pro Micro 3V3/8MHz
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pro Micro 5V/16MHz
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # LilyPad 3V3/8MHz (and some Pro Micro clones)
# Pololu Electronics
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # A-Star 32U4
# Arduino SA
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Leonardo
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Micro
# Adafruit Industries LLC
SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Feather 32U4
SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # ItsyBitsy 32U4 3V3/8MHz
SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # ItsyBitsy 32U4 5V/16MHz
# dog hunter AG
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Leonardo
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Micro
```
Once added, run the following:
```
sudo udevadm control --reload-rules
sudo udevadm trigger
```
**/etc/udev/rules.d/50-atmel-dfu.rules:**
```
# Atmel ATMega32U4
SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess", RUN{builtin}+="uaccess"
# Atmel USBKEY AT90USB1287
SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess", RUN{builtin}+="uaccess"
# Atmel ATMega32U2
SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", TAG+="uaccess", RUN{builtin}+="uaccess"
```
**/etc/udev/rules.d/54-input-club-keyboard.rules:**
**Note:** With older versions of ModemManager (< 1.12), filtering only works when not in strict mode. The following commands can update that setting:
```
# Input Club keyboard bootloader
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", ATTRS{idProduct}=="b007", TAG+="uaccess", RUN{builtin}+="uaccess"
```
**/etc/udev/rules.d/55-caterina.rules:**
```
# ModemManager should ignore the following devices
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
```
**Note:** With older (before 1.12) ModemManager, filtering only works when not in strict mode, the following commands can update that settings:
```console
printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf
sudo systemctl daemon-reload
sudo systemctl restart ModemManager
```
**/etc/udev/rules.d/56-dfu-util.rules:**
```
# stm32duino
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
# Generic stm32
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess", RUN{builtin}+="uaccess"
```
**/etc/udev/rules.d/57-bootloadhid.rules:**
```
# bootloadHID
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", TAG+="uaccess", RUN{builtin}+="uaccess"
```
### Serial device is not detected in bootloader mode on Linux
Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
@ -96,46 +107,6 @@ You can buy a really unique VID:PID here. I don't think you need this for person
- http://www.obdev.at/products/vusb/license.html
- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
## BOOTLOADER_SIZE for AVR
Note that Teensy2.0++ bootloader size is 2048byte. Some Makefiles may have wrong comment.
```
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 2048
# Atmel DFU loader 4096 (TMK Alt Controller)
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=2048
```
## `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` on MacOS
This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled.
The solution is to remove and reinstall all affected modules.
```
brew rm avr-gcc avr-gcc@8 dfu-programmer dfu-util gcc-arm-none-eabi arm-gcc-bin@8 avrdude qmk
brew install qmk/qmk/qmk
brew link --force avr-gcc@8
brew link --force arm-gcc-bin@8
```
### `avr-gcc` and LUFA
If you updated your `avr-gcc` and you see errors involving LUFA, for example:
`lib/lufa/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h:380:5: error: 'const' attribute on function returning 'void'`
For now, you need to rollback `avr-gcc` to 8 in Homebrew.
```
brew uninstall --force avr-gcc
brew install avr-gcc@8
brew link --force avr-gcc@8
```
### I just flashed my keyboard and it does nothing/keypresses don't register - it's also ARM (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019)
Due to how EEPROM works on ARM based chips, saved settings may no longer be valid. This affects the default layers, and *may*, under certain circumstances we are still figuring out, make the keyboard unusable. Resetting the EEPROM will correct this.

View File

@ -31,20 +31,6 @@ Check:
- try using 'print' function instead of debug print. See **common/print.h**.
- disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
## Linux or UNIX Like System Requires Super User Privilege
Just use 'sudo' to execute *hid_listen* with privilege.
```
$ sudo hid_listen
```
Or add an *udev rule* for TMK devices with placing a file in rules directory. The directory may vary on each system.
File: /etc/udev/rules.d/52-tmk-keyboard.rules(in case of Ubuntu)
```
# tmk keyboard products https://github.com/tmk/tmk_keyboard
SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
```
***
# Miscellaneous

View File

@ -150,25 +150,58 @@ def check_udev_rules():
ok = True
udev_dir = Path("/etc/udev/rules.d/")
desired_rules = {
'dfu': {_udev_rule("03eb", "2ff4"), _udev_rule("03eb", "2ffb"), _udev_rule("03eb", "2ff0")},
'input_club': {_udev_rule("1c11", "b007")},
'stm32': {_udev_rule("1eaf", "0003"), _udev_rule("0483", "df11")},
'bootloadhid': {_udev_rule("16c0", "05df")},
'atmel-dfu': {
_udev_rule("03EB", "2FEF"), # ATmega16U2
_udev_rule("03EB", "2FF0"), # ATmega32U2
_udev_rule("03EB", "2FF3"), # ATmega16U4
_udev_rule("03EB", "2FF4"), # ATmega32U4
_udev_rule("03EB", "2FF9"), # AT90USB64
_udev_rule("03EB", "2FFB") # AT90USB128
},
'kiibohd': {
_udev_rule("1C11", "B007")
},
'stm32': {
_udev_rule("1EAF", "0003"), # STM32duino
_udev_rule("0483", "DF11") # STM32 DFU
},
'bootloadhid': {
_udev_rule("16C0", "05DF")
},
'usbasploader': {
_udev_rule("16C0", "05DC")
},
'massdrop': {
_udev_rule("03EB", "6124")
},
'caterina': {
_udev_rule("2341", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),
_udev_rule("1b4f", "9205", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),
_udev_rule("1b4f", "9203", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),
_udev_rule("2a03", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"')
# Spark Fun Electronics
_udev_rule("1B4F", "9203", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Pro Micro 3V3/8MHz
_udev_rule("1B4F", "9205", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Pro Micro 5V/16MHz
_udev_rule("1B4F", "9207", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # LilyPad 3V3/8MHz (and some Pro Micro clones)
# Pololu Electronics
_udev_rule("1FFB", "0101", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # A-Star 32U4
# Arduino SA
_udev_rule("2341", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Leonardo
_udev_rule("2341", "0037", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Micro
# Adafruit Industries LLC
_udev_rule("239A", "000C", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Feather 32U4
_udev_rule("239A", "000D", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # ItsyBitsy 32U4 3V3/8MHz
_udev_rule("239A", "000E", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # ItsyBitsy 32U4 5V/16MHz
# dog hunter AG
_udev_rule("2A03", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"'), # Leonardo
_udev_rule("2A03", "0037", 'ENV{ID_MM_DEVICE_IGNORE}="1"') # Micro
}
}
# These rules are no longer recommended, only use them to check for their presence.
deprecated_rules = {
'dfu': {_deprecated_udev_rule("03eb", "2ff4"), _deprecated_udev_rule("03eb", "2ffb"), _deprecated_udev_rule("03eb", "2ff0")},
'input_club': {_deprecated_udev_rule("1c11")},
'atmel-dfu': {_deprecated_udev_rule("03eb", "2ff4"), _deprecated_udev_rule("03eb", "2ffb"), _deprecated_udev_rule("03eb", "2ff0")},
'kiibohd': {_deprecated_udev_rule("1c11")},
'stm32': {_deprecated_udev_rule("1eaf", "0003"), _deprecated_udev_rule("0483", "df11")},
'bootloadhid': {_deprecated_udev_rule("16c0", "05df")},
'caterina': {'ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"', 'ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"'}
'caterina': {'ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"', 'ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"'},
'tmk': {_deprecated_udev_rule("feed")}
}
if udev_dir.exists():
@ -194,7 +227,7 @@ def check_udev_rules():
if deprecated_rule and deprecated_rule.issubset(current_rules):
cli.log.warn("{bg_yellow}Found old, deprecated udev rules for '%s' boards. The new rules on https://docs.qmk.fm/#/faq_build?id=linux-udev-rules offer better security with the same functionality.", bootloader)
else:
cli.log.warn("{bg_yellow}Missing udev rules for '%s' boards. You'll need to use `sudo` in order to flash them.", bootloader)
cli.log.warn("{bg_yellow}Missing udev rules for '%s' boards. See https://docs.qmk.fm/#/faq_build?id=linux-udev-rules for more details.", bootloader)
return ok