masq
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[Keymap] Drashna keymap updates for 0.18.0 (#18184) 

Co-authored-by: Ryan <fauxpark@gmail.com>
This commit is contained in:
Drashna Jaelre 2022-08-28 12:55:19 -07:00 committed by GitHub
parent d4a6ee1cad
commit fa08cb2478
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
32 changed files with 720 additions and 301 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
keyboards/bastardkb/charybdis/4x6/keymaps/drashna/config.h
View File

@ -16,6 +16,9 @@
*/
#pragma once
#undef PRODUCT
#define PRODUCT "Charybdis (4x6) Blackpill"
#undef MATRIX_COL_PINS
#define MATRIX_COL_PINS \
{ B0, B1, B12, B3, B4, B5 }
@ -34,7 +37,7 @@
#define DIODE_DIRECTION ROW2COL
#define SPLIT_HAND_PIN A3
#undef MASTER_RIGHT
// #define USB_VBUS_PIN B10
#define USB_VBUS_PIN B10
#undef RGB_DI_PIN
#define RGB_DI_PIN A1
@ -55,6 +58,8 @@
#define AUDIO_PWM_PAL_MODE 2
#define AUDIO_STATE_TIMER GPTD3
#define AUDIO_INIT_DELAY
#define AUDIO_ENABLE_TONE_MULTIPLEXING
#define AUDIO_TONE_MULTIPLEXING_RATE_DEFAULT 10
#undef SOFT_SERIAL_PIN
// #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
@ -64,12 +69,8 @@
// #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
// #define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
// #define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100
// // #define SERIAL_USART_PIN_SWAP // swap RX and TX pins on master
// // To use the highest possible baudrate (3.75Mbit/s) uncomment the following
// // line, this can result in dropped communications so lower the speed if there
// // are many timeouts.
// // #define SERIAL_USART_SPEED (STM32_PCLK2 >> 4)
#define SERIAL_USART_SPEED 921600
// #define SERIAL_USART_SPEED 921600
#define SERIAL_USART_SPEED (1.5 * 1024 * 1024)
#define CRC8_USE_TABLE
#define CRC8_OPTIMIZE_SPEED
@ -103,3 +104,12 @@
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
#define CHARYBDIS_CONFIG_SYNC
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0
#define BOOTMAGIC_LITE_ROW_RIGHT 5
#define BOOTMAGIC_LITE_COLUMN_RIGHT 0
#define BOOTMAGIC_LITE_EEPROM_ROW 1
#define BOOTMAGIC_LITE_EEPROM_COLUMN 0
#define BOOTMAGIC_LITE_EEPROM_ROW_RIGHT 1
#define BOOTMAGIC_LITE_EEPROM_COLUMN_RIGHT 0

4
keyboards/bastardkb/charybdis/4x6/keymaps/drashna/keymap.c
View File

@ -26,8 +26,8 @@
KC_ESC, ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________, UC_CLUE, \
SH_TT, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, SH_TT, \
LALT_T(KC_TAB), K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(K1B), \
OS_LSFT,CTL_T(K21),ALT_T(K22),GUI_T(K23),K24,K25, K26,K27,RGUI_T(K28),RALT_T(K29),RCTL_T(K2A), OS_RSFT, \
SFT_T(KC_GRV), UC_IRNY, OS_LGUI, TT(_MOUSE), KC_ENT, \
OS_LSFT,CTL_T(K21), K22, K23, K24, K25, K26,K27,RGUI_T(K28),RALT_T(K29),RCTL_T(K2A), OS_RSFT, \
SFT_T(KC_GRV), OS_LALT, OS_LGUI, TT(_MOUSE), KC_ENT, \
KC_SPC, BK_LWER, DL_RAIS \
)

1
keyboards/bastardkb/charybdis/4x6/keymaps/drashna/rules.mk
View File

@ -31,3 +31,4 @@ TAP_DANCE_ENABLE = yes
DEBOUNCE_TYPE = asym_eager_defer_pk
WPM_ENABLE = yes
LTO_ENABLE = no
# OPT = 3

8
keyboards/bastardkb/dilemma/keymaps/drashna/config.h Normal file
View File

@ -0,0 +1,8 @@
// Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#define CIRQUE_PINNACLE_TAP_ENABLE
#define POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE
#define POINTING_DEVICE_GESTURES_SCROLL_ENABLE

160
keyboards/bastardkb/dilemma/keymaps/drashna/keymap.c Normal file
View File

@ -0,0 +1,160 @@
/**
* Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "drashna.h"
// clang-format off
#define LAYOUT_split_3x5_2_wrapper(...) LAYOUT_split_3x5_2(__VA_ARGS__)
#define LAYOUT_split_3x5_2_base( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \
) \
LAYOUT_split_3x5_2 ( \
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
ALT_T(K11), K12, K13, K14, GUI_T(K15), LGUI_T(K16), K17, K18, K19, LALT_T(K1A), \
CTL_T(K21), K22, K23, K24, K25, K26, K27, K28, K29, RCTL_T(K2A), \
KC_SPC, BK_LWER, DL_RAIS, RSFT_T(KC_ENT) \
)
#define LAYOUT_split_3x5_2_base_wrapper(...) LAYOUT_split_3x5_2_base(__VA_ARGS__)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_DEFAULT_LAYER_1] = LAYOUT_split_3x5_2_base_wrapper(
_________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
_________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
_________________QWERTY_L3_________________, _________________QWERTY_R3_________________
),
[_DEFAULT_LAYER_2] = LAYOUT_split_3x5_2_base_wrapper(
______________COLEMAK_MOD_DH_L1____________, ______________COLEMAK_MOD_DH_R1____________,
______________COLEMAK_MOD_DH_L2____________, ______________COLEMAK_MOD_DH_R2____________,
______________COLEMAK_MOD_DH_L3____________, ______________COLEMAK_MOD_DH_R3____________
),
[_DEFAULT_LAYER_3] = LAYOUT_split_3x5_2_base_wrapper(
_________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
_________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
_________________COLEMAK_L3________________, _________________COLEMAK_R3________________
),
[_DEFAULT_LAYER_4] = LAYOUT_split_3x5_2_base_wrapper(
_________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
_________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
_________________DVORAK_L3_________________, _________________DVORAK_R3_________________
),
[_MOUSE] = LAYOUT_split_3x5_2(
_______, _______, _______, _______, _______, KC_WH_U, DPI_RMOD,DPI_MOD, S_D_RMOD,S_D_MOD,
_______, _______, _______, _______, _______, KC_WH_D, KC_BTN1, KC_BTN3, KC_BTN2, KC_BTN6,
_______, _______, _______, _______, _______, KC_BTN7, KC_BTN4, KC_BTN5, KC_BTN8, _______,
SNIPING, _______, _______, _______
),
[_LOWER] = LAYOUT_split_3x5_2_wrapper(
_________________LOWER_L1__________________, _________________LOWER_R1__________________,
_________________LOWER_L2__________________, _________________LOWER_R2__________________,
_________________LOWER_L3__________________, _________________LOWER_R3__________________,
_______, _______, _______, AUTO_CTN
),
[_RAISE] = LAYOUT_split_3x5_2_wrapper(
_________________RAISE_L1__________________, _________________RAISE_R1__________________,
_________________RAISE_L2__________________, _________________RAISE_R2__________________,
_________________RAISE_L3__________________, _________________RAISE_R3__________________,
_______, _______, _______, _______
),
[_ADJUST] = LAYOUT_split_3x5_2_wrapper(
_________________ADJUST_L1_________________, _________________ADJUST_R1_________________,
_________________ADJUST_L2_________________, _________________ADJUST_R2_________________,
_________________ADJUST_L3_________________, _________________ADJUST_R3_________________,
KC_NUKE, _______, _______, QK_BOOT
),
};
void matrix_output_unselect_delay(uint8_t line, bool key_pressed) {
for (int32_t i = 0; i < 40; i++) {
__asm__ volatile("nop" ::: "memory");
}
}
#if defined(OLED_ENABLE) && defined(OLED_DISPLAY_128X128)
# ifdef UNICODE_COMMON_ENABLE
# include "process_unicode_common.h"
# include "keyrecords/unicode.h"
# endif
extern const char PROGMEM display_border[3];
extern uint32_t oled_timer;
extern bool is_oled_enabled;
bool oled_task_keymap(void) {
static const char PROGMEM header_image[] = {
0, 192, 32, 16, 8, 4, 2, 1, 1, 1, 1, 1, 1, 1, 1, 3, 7, 15, 31, 63, 127, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 127, 63, 31, 15, 7, 3, 1, 1, 1, 1, 1, 1, 1, 1, 2, 4, 8, 16, 32, 192, 0,
// 0,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 3, 7, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 7, 3, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255, 0
};
oled_write_raw_P(header_image, sizeof(header_image));
oled_set_cursor(7, 0);
oled_write_P(PSTR("Rock On"), true);
render_default_layer_state(1, 1);
render_layer_state(1, 2);
render_kitty(0, 5);
render_wpm(1, 7, 5);
# if defined(POINTING_DEVICE_ENABLE)
render_pointing_dpi_status(dilemma_get_pointer_sniping_enabled() ? dilemma_get_pointer_sniping_dpi() : dilemma_get_pointer_default_dpi(), 1, 7, 6);
render_mouse_mode(17, 6);
# elif defined(WPM_ENABLE) && defined(DEBUG_MATRIX_SCAN_RATE)
render_matrix_scan_rate(1, 7, 6);
# endif
render_bootmagic_status(7, 7);
render_user_status(1, 9);
render_mod_status(get_mods() | get_oneshot_mods(), 1, 10);
render_keylock_status(host_keyboard_led_state(), 1, 11);
render_unicode_mode(1, 12);
// render_rgb_hsv(1, 13);
oled_set_cursor(1, 13);
// oled_write_P(PSTR("Timer:"), false);
// oled_write(get_u8_str((uint8_t)(timer_elapsed32(oled_timer) / 1000), ' '), false);
oled_write_P(PSTR("Status: "), false);
if (is_oled_enabled) {
oled_write_P(PSTR("on "), false);
} else {
oled_write_P(PSTR("off"), false);
}
render_keylogger_status(1, 14);
for (uint8_t i = 1; i < 15; i++) {
oled_set_cursor(0, i);
oled_write_raw_P(display_border, sizeof(display_border));
oled_set_cursor(21, i);
oled_write_raw_P(display_border, sizeof(display_border));
}
static const char PROGMEM footer_image[] = {0, 3, 4, 8, 16, 32, 64, 128, 128, 128, 128, 128, 128, 128, 192, 224, 240, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 248, 240, 224, 192, 128, 128, 128, 128, 128, 128, 128, 64, 32, 16, 8, 4, 3, 0};
oled_set_cursor(0, 15);
oled_write_raw_P(footer_image, sizeof(footer_image));
return false;
}
#endif

8
keyboards/bastardkb/dilemma/keymaps/drashna/rules.mk Normal file
View File

@ -0,0 +1,8 @@
SWAP_HANDS_ENABLE = no
AUTOCORRECTION_ENABLE = yes
CAPS_WORD_ENABLE = yes
CONSOLE_ENABLE = yes
KEYLOGGER_ENABLE = no
WPM_ENABLE = yes
OLED_ENABLE = yes
OLED_DRIVER = custom

2
keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h
View File

@ -75,7 +75,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define I2C1_SCL_PAL_MODE 4
#define I2C1_SDA_PAL_MODE 4
#define I2C1_CLOCK_SPEED 400000
#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_16_9
/* encoder config */
#define ENCODERS_PAD_A \

2
keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c
View File

@ -24,7 +24,7 @@ void matrix_scan_sub_kb(void) {
}
}
void bootmagic_lite(void) {
__attribute__((weak)) void bootmagic_lite(void) {
// We need multiple scans because debouncing can't be turned off.
matrix_scan();
#if defined(DEBOUNCE) && DEBOUNCE > 0

6
keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h
View File

@ -28,3 +28,9 @@
#define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 200
#define ENCODER_DEFAULT_POS 0x3
#define BOOTMAGIC_LITE_EEPROM_ROW 1
#define BOOTMAGIC_LITE_EEPROM_COLUMN 0
#define BOOTMAGIC_LITE_EEPROM_ROW_RIGHT 7
#define BOOTMAGIC_LITE_EEPROM_COLUMN_RIGHT 5

19
keyboards/ploopyco/mouse/keymaps/drashna/keymap.c
View File

@ -19,20 +19,23 @@
// safe range starts at `PLOOPY_SAFE_RANGE` instead.
// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT(/* Base */
[0] = LAYOUT(
C(KC_C), KC_BTN1, KC_BTN3, KC_BTN2, MO(1), KC_BTN4, KC_BTN5, DPI_CONFIG),
[1] = LAYOUT(/* Base */
[1] = LAYOUT(
RGB_HUI, RGB_MOD, RGB_TOG, RGB_RMOD, MO(1), KC_VOLU, KC_VOLD, QK_BOOT)
};
// clang-format on
#ifdef RGBLIGHT_ENABLE
void eeconkfig_init_user(void) {
rgblight_enable();
#ifdef RGBLIGHT_EFFECT_TWINKLE
rgblight_mode(RGBLIGHT_MODE_TWINKLE+5);
#else
rgblight_mode(RGBLIGHT_MODE_BREATHING+5);
#endif
# ifdef RGBLIGHT_EFFECT_TWINKLE
rgblight_mode(RGBLIGHT_MODE_TWINKLE + 5);
# else
rgblight_mode(RGBLIGHT_MODE_BREATHING + 5);
# endif
rgblight_sethsv(HSV_MAGENTA);
}
#endif

3
keyboards/ploopyco/mouse/keymaps/drashna/rules.mk
View File

@ -1,5 +1,6 @@
USER_NAME := not_drashna
BOOTLOADER = qmk-hid
RGBLIGHT_ENABLE = yes
CONSOLE_ENABLE = no
LTO_ENABLE = yes
LTO_ENABLE = yes

5
keyboards/splitkb/kyria/keymaps/drashna/config.h
View File

@ -46,4 +46,9 @@
#define BOOTMAGIC_LITE_ROW_RIGHT 4
#define BOOTMAGIC_LITE_COLUMN_RIGHT 7
#define BOOTMAGIC_LITE_EEPROM_ROW 1
#define BOOTMAGIC_LITE_EEPROM_COLUMN 7
#define BOOTMAGIC_LITE_EEPROM_ROW_RIGHT 5
#define BOOTMAGIC_LITE_EEPROM_COLUMN_RIGHT 7
#define SERIAL_USART_SPEED 921600

90
users/drashna/autocorrect_data.h
View File

@ -1,5 +1,93 @@
#if __has_include("../qmk_secrets/autocorrection_data.h")
# pragma message "Loading custom library"
# include "../qmk_secrets/autocorrection_data.h"
# define AUTOCORRECTION_MIN_LENGTH AUTOCORRECT_MIN_LENGTH
# define AUTOCORRECTION_MAX_LENGTH AUTOCORRECT_MAX_LENGTH
#else
# include "autocorrect_data_default.h"
// Generated code.
// Autocorrection dictionary (70 entries):
// :guage -> gauge
// :the:the: -> the
// :thier -> their
// :ture -> true
// accomodate -> accommodate
// acommodate -> accommodate
// aparent -> apparent
// aparrent -> apparent
// apparant -> apparent
// apparrent -> apparent
// aquire -> acquire
// becuase -> because
// cauhgt -> caught
// cheif -> chief
// choosen -> chosen
// cieling -> ceiling
// collegue -> colleague
// concensus -> consensus
// contians -> contains
// cosnt -> const
// dervied -> derived
// fales -> false
// fasle -> false
// fitler -> filter
// flase -> false
// foward -> forward
// frequecy -> frequency
// gaurantee -> guarantee
// guaratee -> guarantee
// heigth -> height
// heirarchy -> hierarchy
// inclued -> include
// interator -> iterator
// intput -> input
// invliad -> invalid
// lenght -> length
// liasion -> liaison
// libary -> library
// listner -> listener
// looses: -> loses
// looup -> lookup
// manefist -> manifest
// namesapce -> namespace
// namespcae -> namespace
// occassion -> occasion
// occured -> occurred
// ouptut -> output
// ouput -> output
// overide -> override
// postion -> position
// priviledge -> privilege
// psuedo -> pseudo
// recieve -> receive
// refered -> referred
// relevent -> relevant
// repitition -> repetition
// retrun -> return
// retun -> return
// reuslt -> result
// reutrn -> return
// saftey -> safety
// seperate -> separate
// singed -> signed
// stirng -> string
// strign -> string
// swithc -> switch
// swtich -> switch
// thresold -> threshold
// udpate -> update
// widht -> width
#define AUTOCORRECT_MIN_LENGTH 5 // ":ture"
#define AUTOCORRECT_MAX_LENGTH 10 // "accomodate"
#define DICTIONARY_SIZE 1104
static const uint8_t autocorrect_data[DICTIONARY_SIZE] PROGMEM = {108, 43, 0, 6, 71, 0, 7, 81, 0, 8, 199, 0, 9, 240, 1, 10, 250, 1, 11, 26, 2, 17, 53, 2, 18, 190, 2, 19, 202, 2, 21, 212, 2, 22, 20, 3, 23, 67, 3, 28, 16, 4, 0, 72, 50, 0, 22, 60, 0, 0, 11, 23, 44, 8, 11, 23, 44, 0, 132, 0, 8, 22, 18, 18, 15, 0, 132, 115, 101, 115, 0, 11, 23, 12, 26, 22, 0, 129, 99, 104, 0, 68, 94, 0, 8, 106, 0, 15, 174, 0, 21, 187, 0, 0, 12, 15, 25, 17, 12, 0, 131, 97, 108, 105, 100, 0, 74, 119, 0, 12, 129, 0, 21, 140, 0, 24, 165, 0, 0, 17, 12, 22, 0, 131, 103, 110, 101, 100, 0, 25, 21, 8, 7, 0, 131, 105, 118, 101, 100, 0, 72, 147, 0, 24, 156, 0, 0, 9, 8, 21, 0, 129, 114, 101, 100, 0, 6, 6, 18, 0, 129, 114, 101, 100, 0, 15, 6, 17, 12, 0, 129, 100, 101, 0, 18, 22, 8, 21, 11, 23, 0, 130, 104, 111,
108, 100, 0, 4, 26, 18, 9, 0, 131, 114, 119, 97, 114, 100, 0, 68, 233, 0, 6, 246, 0, 7, 4, 1, 8, 16, 1, 10, 52, 1, 15, 81, 1, 21, 90, 1, 22, 117, 1, 23, 144, 1, 24, 215, 1, 25, 228, 1, 0, 6, 19, 22, 8, 16, 4, 17, 0, 130, 97, 99, 101, 0, 19, 4, 22, 8, 16, 4, 17, 0, 131, 112, 97, 99, 101, 0, 12, 21, 8, 25, 18, 0, 130, 114, 105, 100, 101, 0, 23, 0, 68, 25, 1, 17, 36, 1, 0, 21, 4, 24, 10, 0, 130, 110, 116, 101, 101, 0, 4, 21, 24, 4, 10, 0, 135, 117, 97, 114, 97, 110, 116, 101, 101, 0, 68, 59, 1, 7, 69, 1, 0, 24, 10, 44, 0, 131, 97, 117, 103, 101, 0, 8, 15, 12, 25, 12, 21, 19, 0, 130, 103, 101, 0, 22, 4, 9, 0, 130, 108, 115, 101, 0, 76, 97, 1, 24, 109, 1, 0, 24, 20, 4, 0, 132, 99, 113, 117, 105, 114, 101, 0, 23, 44, 0,
130, 114, 117, 101, 0, 4, 0, 79, 126, 1, 24, 134, 1, 0, 9, 0, 131, 97, 108, 115, 101, 0, 6, 8, 5, 0, 131, 97, 117, 115, 101, 0, 4, 0, 71, 156, 1, 19, 193, 1, 21, 203, 1, 0, 18, 16, 0, 80, 166, 1, 18, 181, 1, 0, 18, 6, 4, 0, 135, 99, 111, 109, 109, 111, 100, 97, 116, 101, 0, 6, 6, 4, 0, 132, 109, 111, 100, 97, 116, 101, 0, 7, 24, 0, 132, 112, 100, 97, 116, 101, 0, 8, 19, 8, 22, 0, 132, 97, 114, 97, 116, 101, 0, 10, 8, 15, 15, 18, 6, 0, 130, 97, 103, 117, 101, 0, 8, 12, 6, 8, 21, 0, 131, 101, 105, 118, 101, 0, 12, 8, 11, 6, 0, 130, 105, 101, 102, 0, 17, 0, 76, 3, 2, 21, 16, 2, 0, 15, 8, 12, 6, 0, 133, 101, 105, 108, 105, 110, 103, 0, 12, 23, 22, 0, 131, 114, 105, 110, 103, 0, 70, 33, 2, 23, 44, 2, 0, 12, 23, 26, 22, 0, 131, 105,
116, 99, 104, 0, 10, 12, 8, 11, 0, 129, 104, 116, 0, 72, 69, 2, 10, 80, 2, 18, 89, 2, 21, 156, 2, 24, 167, 2, 0, 22, 18, 18, 11, 6, 0, 131, 115, 101, 110, 0, 12, 21, 23, 22, 0, 129, 110, 103, 0, 12, 0, 86, 98, 2, 23, 124, 2, 0, 68, 105, 2, 22, 114, 2, 0, 12, 15, 0, 131, 105, 115, 111, 110, 0, 4, 6, 6, 18, 0, 131, 105, 111, 110, 0, 76, 131, 2, 22, 146, 2, 0, 23, 12, 19, 8, 21, 0, 134, 101, 116, 105, 116, 105, 111, 110, 0, 18, 19, 0, 131, 105, 116, 105, 111, 110, 0, 23, 24, 8, 21, 0, 131, 116, 117, 114, 110, 0, 85, 174, 2, 23, 183, 2, 0, 23, 8, 21, 0, 130, 117, 114, 110, 0, 8, 21, 0, 128, 114, 110, 0, 7, 8, 24, 22, 19, 0, 131, 101, 117, 100, 111, 0, 24, 18, 18, 15, 0, 129, 107, 117, 112, 0, 72, 219, 2, 18, 3, 3, 0, 76, 229, 2, 15, 238,
2, 17, 248, 2, 0, 11, 23, 44, 0, 130, 101, 105, 114, 0, 23, 12, 9, 0, 131, 108, 116, 101, 114, 0, 23, 22, 12, 15, 0, 130, 101, 110, 101, 114, 0, 23, 4, 21, 8, 23, 17, 12, 0, 135, 116, 101, 114, 97, 116, 111, 114, 0, 72, 30, 3, 17, 38, 3, 24, 51, 3, 0, 15, 4, 9, 0, 129, 115, 101, 0, 4, 12, 23, 17, 18, 6, 0, 131, 97, 105, 110, 115, 0, 22, 17, 8, 6, 17, 18, 6, 0, 133, 115, 101, 110, 115, 117, 115, 0, 74, 86, 3, 11, 96, 3, 15, 118, 3, 17, 129, 3, 22, 218, 3, 24, 232, 3, 0, 11, 24, 4, 6, 0, 130, 103, 104, 116, 0, 71, 103, 3, 10, 110, 3, 0, 12, 26, 0, 129, 116, 104, 0, 17, 8, 15, 0, 129, 116, 104, 0, 22, 24, 8, 21, 0, 131, 115, 117, 108, 116, 0, 68, 139, 3, 8, 150, 3, 22, 210, 3, 0, 21, 4, 19, 19, 4, 0, 130, 101, 110, 116, 0, 85, 157,
3, 25, 200, 3, 0, 68, 164, 3, 21, 175, 3, 0, 19, 4, 0, 132, 112, 97, 114, 101, 110, 116, 0, 4, 19, 0, 68, 185, 3, 19, 193, 3, 0, 133, 112, 97, 114, 101, 110, 116, 0, 4, 0, 131, 101, 110, 116, 0, 8, 15, 8, 21, 0, 130, 97, 110, 116, 0, 18, 6, 0, 130, 110, 115, 116, 0, 12, 9, 8, 17, 4, 16, 0, 132, 105, 102, 101, 115, 116, 0, 83, 239, 3, 23, 6, 4, 0, 87, 246, 3, 24, 254, 3, 0, 17, 12, 0, 131, 112, 117, 116, 0, 18, 0, 130, 116, 112, 117, 116, 0, 19, 24, 18, 0, 131, 116, 112, 117, 116, 0, 70, 29, 4, 8, 41, 4, 11, 51, 4, 21, 69, 4, 0, 8, 24, 20, 8, 21, 9, 0, 129, 110, 99, 121, 0, 23, 9, 4, 22, 0, 130, 101, 116, 121, 0, 6, 21, 4, 21, 12, 8, 11, 0, 135, 105, 101, 114, 97, 114, 99, 104, 121, 0, 4, 5, 12, 15, 0, 130, 114, 97, 114, 121, 0};
#endif

20
users/drashna/callbacks.c
View File

@ -3,6 +3,12 @@
#include "drashna.h"
#ifdef I2C_SCANNER_ENABLE
void matrix_scan_i2c(void);
void keyboard_post_init_i2c(void);
#endif
__attribute__((weak)) void keyboard_pre_init_keymap(void) {}
void keyboard_pre_init_user(void) {
userspace_config.raw = eeconfig_read_user();
@ -42,6 +48,10 @@ void keyboard_post_init_user(void) {
#if defined(SPLIT_KEYBOARD) && defined(SPLIT_TRANSACTION_IDS_USER)
keyboard_post_init_transport_sync();
#endif
#ifdef I2C_SCANNER_ENABLE
matrix_scan_i2c();
#endif
keyboard_post_init_keymap();
}
@ -54,10 +64,10 @@ void shutdown_user(void) {
#ifdef RGBLIGHT_ENABLE
rgblight_enable_noeeprom();
rgblight_mode_noeeprom(1);
rgblight_setrgb_red();
rgblight_setrgb(rgblight_get_val(), 0x00, 0x00);
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
rgb_matrix_set_color_all(0xFF, 0x00, 0x00);
rgb_matrix_set_color_all(rgb_matrix_get_val(), 0x00, 0x00);
rgb_matrix_update_pwm_buffers();
#endif // RGB_MATRIX_ENABLE
#ifdef OLED_ENABLE
@ -112,6 +122,12 @@ void matrix_scan_user(void) {
#endif
#if defined(CUSTOM_RGB_MATRIX)
matrix_scan_rgb_matrix();
#endif
#ifdef I2C_SCANNER_ENABLE
matrix_scan_i2c();
#endif
#ifdef CUSTOM_OLED_DRIVER
matrix_scan_oled();
#endif
matrix_scan_secret();

232
users/drashna/config.h
View File

@ -11,26 +11,20 @@
#endif
#define IS_COMMAND() (((get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT) == MOD_MASK_SHIFT)
/* Set Polling rate to 1000Hz */
#define USB_POLLING_INTERVAL_MS 1
#if defined(SPLIT_KEYBOARD)
// # define SPLIT_TRANSPORT_MIRROR
# define SPLIT_LAYER_STATE_ENABLE
# define SPLIT_LED_STATE_ENABLE
# define SPLIT_MODS_ENABLE
# ifdef WPM_ENABLE
# define SPLIT_WPM_ENABLE
# endif
# ifdef OLED_ENABLE
# define SPLIT_OLED_ENABLE
# endif
# if defined(__AVR__) && !defined(SELECT_SOFT_SERIAL_SPEED)
# define SELECT_SOFT_SERIAL_SPEED 1
# endif
# ifdef CUSTOM_SPLIT_TRANSPORT_SYNC
# define SPLIT_TRANSACTION_IDS_USER RPC_ID_USER_STATE_SYNC, RPC_ID_USER_KEYMAP_SYNC, RPC_ID_USER_CONFIG_SYNC, RPC_ID_USER_WATCHDOG_SYNC, RPC_ID_USER_KEYLOG_STR
# endif
# include "split/split_config.h"
#endif
#ifdef RGBLIGHT_ENABLE
# include "rgb/rgblight_config.h"
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
# include "rgb/rgb_matrix_config.h"
#endif // RGB_MATRIX_ENABLE
#ifdef OLED_ENABLE
# include "oled/oled_config.h"
#endif
#if defined(WPM_ENABLE)
@ -71,157 +65,6 @@
#define UNICODE_SELECTED_MODES UC_WINC, UC_MAC
#ifdef RGBLIGHT_ENABLE
# define RGBLIGHT_SLEEP
# define RGBLIGHT_EFFECT_TWINKLE_LIFE 250
# define RGBLIGHT_EFFECT_TWINKLE_PROBABILITY 1 / 24
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
// # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
# undef ENABLE_RGB_MATRIX_ALPHAS_MODS
# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
# undef ENABLE_RGB_MATRIX_BREATHING
# undef ENABLE_RGB_MATRIX_BAND_SAT
# undef ENABLE_RGB_MATRIX_BAND_VAL
# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
# undef ENABLE_RGB_MATRIX_CYCLE_ALL
# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN
# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL
# undef ENABLE_RGB_MATRIX_DUAL_BEACON
# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON
# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
# undef ENABLE_RGB_MATRIX_RAINDROPS
# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# undef ENABLE_RGB_MATRIX_HUE_BREATHING
# undef ENABLE_RGB_MATRIX_HUE_PENDULUM
# undef ENABLE_RGB_MATRIX_HUE_WAVE
# undef ENABLE_RGB_MATRIX_PIXEL_RAIN
# undef ENABLE_RGB_MATRIX_PIXEL_FLOW
# undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP
# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN
// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE
# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# undef ENABLE_RGB_MATRIX_SPLASH
# undef ENABLE_RGB_MATRIX_MULTISPLASH
# undef ENABLE_RGB_MATRIX_SOLID_SPLASH
# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
# if !defined(SPLIT_KEYBOARD) && !defined(KEYBOARD_ergodox_ez) && !defined(KEYBOARD_moonlander)
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
# endif
# if defined(__arm__) || defined(__AVR_AT90USB1286__) || defined(KEYBOARD_launchpad)
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_BREATHING
# define ENABLE_RGB_MATRIX_BAND_SAT
# define ENABLE_RGB_MATRIX_BAND_VAL
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
# define ENABLE_RGB_MATRIX_CYCLE_ALL
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
# define ENABLE_RGB_MATRIX_DUAL_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
# define ENABLE_RGB_MATRIX_RAINDROPS
# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# define ENABLE_RGB_MATRIX_HUE_BREATHING
# define ENABLE_RGB_MATRIX_HUE_PENDULUM
# define ENABLE_RGB_MATRIX_HUE_WAVE
# define ENABLE_RGB_MATRIX_PIXEL_RAIN
# define ENABLE_RGB_MATRIX_PIXEL_FLOW
# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define ENABLE_RGB_MATRIX_SPLASH
# define ENABLE_RGB_MATRIX_MULTISPLASH
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# endif // AVR
#endif // RGB_MATRIX_ENABLE
#ifdef OLED_ENABLE
# ifndef OLED_UPDATE_INTERVAL
# ifdef OLED_DRIVER_SH1107
# define OLED_UPDATE_INTERVAL 75
# else
# ifdef SPLIT_KEYBOARD
# define OLED_UPDATE_INTERVAL 60
# else
# define OLED_UPDATE_INTERVAL 15
# endif
# endif
# endif
# define OLED_DISABLE_TIMEOUT
# ifdef OLED_FONT_H
# undef OLED_FONT_H
# endif
# define OLED_FONT_H "oled/drashna_font.h"
# define OLED_FONT_END 255
// # define OLED_FONT_5X5
// # define OLED_FONT_AZTECH
// # define OLED_FONT_BMPLAIN
// # define OLED_FONT_CRACKERS
# define OLED_FONT_DEAD_MEAL
// # define OLED_FONT_EIN
// # define OLED_FONT_HISKYF21
// # define OLED_FONT_SQUASH
// # define OLED_FONT_ZXPIX
// # define OLED_FONT_SUPER_DIGG
// # define OLED_LOGO_BEBOP
// # define OLED_LOGO_CORNE
// # define OLED_LOGO_GMK_BAD
// # define OLED_LOGO_GOTHAM
// # define OLED_LOGO_HUE_MANITEE
// # define OLED_LOGO_LOOSE
# define OLED_LOGO_SCIFI
// # define OLED_LOGO_SETS3N
// # define OLED_LOGO_SKEEB
#endif
// #define WPM_ESTIMATED_WORD_SIZE 5
#define WPM_ALLOW_COUNT_REGRESSION
// #define WPM_UNFILTERED
@ -237,11 +80,18 @@
# define ONESHOT_TIMEOUT 3000
#endif // !ONESHOT_TIMEOUT
#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
#define PERMISSIVE_HOLD_PER_KEY
#define TAPPING_FORCE_HOLD_PER_KEY
#define RETRO_TAPPING_PER_KEY
#define TAPPING_TERM_PER_KEY
#if defined(PER_KEY_TAPPING)
# define IGNORE_MOD_TAP_INTERRUPT_PER_KEY
# define PERMISSIVE_HOLD_PER_KEY
# define TAPPING_FORCE_HOLD_PER_KEY
# define HOLD_ON_OTHER_KEY
# define RETRO_TAPPING_PER_KEY
# define HOLD_ON_OTHER_KEY_PRESS_PER_KEY
# define TAPPING_TERM_PER_KEY
#else
# define IGNORE_MOD_TAP_INTERRUPT
# undef PERMISSIVE_HOLD
#endif
#ifndef TAPPING_TOGGLE
# define TAPPING_TOGGLE 1
@ -276,41 +126,7 @@
# define C15 PAL_LINE(GPIOC, 15)
#endif
#ifdef OLED_DRIVER_SH1107
# define OLED_DISPLAY_CUSTOM
# define OLED_IC_SH1107 2
# define OLED_DISPLAY_128X128
# define OLED_DISPLAY_WIDTH 128
# define OLED_DISPLAY_HEIGHT 128
# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)
# define OLED_BLOCK_TYPE uint32_t
# define OLED_SOURCE_MAP \
{ 0, 8, 16, 24, 32, 40, 48, 56 }
# define OLED_TARGET_MAP \
{ 56, 48, 40, 32, 24, 16, 8, 0 }
# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)
# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
# define OLED_COM_PINS COM_PINS_ALT
# define OLED_IC OLED_IC_SH1107
# ifndef OLED_BRIGHTNESS
# define OLED_BRIGHTNESS 50
# endif
#endif
#ifdef USE_I2CV1
# define I2C1_CLOCK_SPEED 400000
# define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
#endif
#define ENABLE_COMPILE_KEYCODE
#define BOTH_SHIFTS_TURNS_ON_CAPS_WORD
#ifndef SECURE_UNLOCK_SEQUENCE
# define SECURE_UNLOCK_SEQUENCE \
{ \
{2, 1}, {2, 2}, {2, 3}, { \
2, 4 \
} \
}
#endif

143
users/drashna/drashna.c
View File

@ -76,49 +76,110 @@ void tap_code16_nomods(uint16_t kc) {
set_mods(temp_mod);
}
/**
* @brief Run shutdown routine and soft reboot firmware.
*
*/
#ifdef I2C_SCANNER_ENABLE
# include "i2c_master.h"
# include "debug.h"
#ifdef HAPTIC_ENABLE
# include "haptic.h"
#endif
#ifdef AUDIO_ENABLE
# ifndef GOODBYE_SONG
# define GOODBYE_SONG SONG(GOODBYE_SOUND)
# ifndef I2C_SCANNER_TIMEOUT
# define I2C_SCANNER_TIMEOUT 50
# endif
float reset_song[][2] = GOODBYE_SONG;
#endif
void software_reset(void) {
clear_keyboard();
#if defined(MIDI_ENABLE) && defined(MIDI_BASIC)
process_midi_all_notes_off();
#endif
#ifdef AUDIO_ENABLE
# ifndef NO_MUSIC_MODE
music_all_notes_off();
# endif
uint16_t timer_start = timer_read();
PLAY_SONG(reset_song);
shutdown_user();
while (timer_elapsed(timer_start) < 250) wait_ms(1);
stop_all_notes();
#else
shutdown_user();
wait_ms(250);
#endif
#ifdef HAPTIC_ENABLE
haptic_shutdown();
#endif
i2c_status_t i2c_start_bodge(uint8_t address, uint16_t timeout) {
i2c_start(address);
#if defined(PROTOCOL_LUFA)
wdt_enable(WDTO_250MS);
#elif defined(PROTOCOL_CHIBIOS)
# if defined(MCU_STM32) || defined(MCU_KINETIS)
NVIC_SystemReset();
# endif
#endif
// except on ChibiOS where the only way is do do "something"
uint8_t data = 0;
return i2c_readReg(address, 0, &data, sizeof(data), I2C_SCANNER_TIMEOUT);
}
# define i2c_start i2c_start_bodge
void do_scan(void) {
uint8_t nDevices = 0;
dprintf("Scanning...\n");
for (uint8_t address = 1; address < 127; address++) {
// The i2c_scanner uses the return value of
// i2c_start to see if a device did acknowledge to the address.
i2c_status_t error = i2c_start(address << 1, I2C_SCANNER_TIMEOUT);
if (error == I2C_STATUS_SUCCESS) {
i2c_stop();
xprintf(" I2C device found at address 0x%02X\n", I2C_SCANNER_TIMEOUT);
nDevices++;
} else {
// dprintf(" Unknown error (%u) at address 0x%02X\n", error, address);
}
}
if (nDevices == 0)
xprintf("No I2C devices found\n");
else
xprintf("done\n");
}
uint16_t scan_timer = 0;
void matrix_scan_i2c(void) {
if (timer_elapsed(scan_timer) > 5000) {
do_scan();
scan_timer = timer_read();
}
}
void keyboard_post_init_i2c(void) {
i2c_init();
scan_timer = timer_read();
}
#endif
void bootmagic_lite(void) {
bool perform_reset = false;
// We need multiple scans because debouncing can't be turned off.
matrix_scan();
#if defined(DEBOUNCE) && DEBOUNCE > 0
wait_ms(DEBOUNCE * 2);
#else
wait_ms(30);
#endif
matrix_scan();
// If the configured key (commonly Esc) is held down on power up,
// reset the EEPROM valid state and jump to bootloader.
// This isn't very generalized, but we need something that doesn't
// rely on user's keymaps in firmware or EEPROM.
uint8_t row = BOOTMAGIC_LITE_ROW, col = BOOTMAGIC_LITE_COLUMN;
#if defined(BOOTMAGIC_LITE_EEPROM_ROW) && defined(BOOTMAGIC_LITE_EEPROM_COLUMN)
uint8_t row_e = BOOTMAGIC_LITE_EEPROM_ROW, col_e = BOOTMAGIC_LITE_EEPROM_COLUMN;
#endif
#if defined(SPLIT_KEYBOARD) && defined(BOOTMAGIC_LITE_ROW_RIGHT) && defined(BOOTMAGIC_LITE_COLUMN_RIGHT)
if (!is_keyboard_left()) {
row = BOOTMAGIC_LITE_ROW_RIGHT;
col = BOOTMAGIC_LITE_COLUMN_RIGHT;
#if defined(BOOTMAGIC_LITE_EEPROM_ROW) && defined(BOOTMAGIC_LITE_EEPROM_COLUMN) && defined(BOOTMAGIC_LITE_EEPROM_ROW_RIGHT) && defined(BOOTMAGIC_LITE_EEPROM_COLUMN_RIGHT)
row_e = BOOTMAGIC_LITE_EEPROM_ROW_RIGHT;
col_e = BOOTMAGIC_LITE_EEPROM_COLUMN_RIGHT;
# endif
}
#endif
#if defined(BOOTMAGIC_LITE_EEPROM_ROW) && defined(BOOTMAGIC_LITE_EEPROM_COLUMN)
if (matrix_get_row(row_e) & (1 << col_e)) {
eeconfig_disable();
perform_reset = true;
}
#endif
if (matrix_get_row(row) & (1 << col)) {
perform_reset = true;
}
#ifdef STM32F411xE
if (!readPin(A0)) {
perform_reset = true;
}
#endif
if (perform_reset) {
bootloader_jump();
}
}

1
users/drashna/drashna.h
View File

@ -79,7 +79,6 @@ bool mod_key_press_timer(uint16_t code, uint16_t mod_code, bool pressed);
bool mod_key_press(uint16_t code, uint16_t mod_code, bool pressed, uint16_t this_timer);
bool hasAllBitsInMask(uint8_t value, uint8_t mask);
void tap_code16_nomods(uint16_t kc);
void software_reset(void);
// clang-format off
typedef union {

1
users/drashna/keyrecords/autocorrection/autocorrection_data.h Normal file
View File

@ -0,0 +1 @@
#include "autocorrect_data.h"

5
users/drashna/keyrecords/process_records.c
View File

@ -6,9 +6,6 @@
#ifdef AUTOCORRECTION_ENABLE
# include "autocorrection/autocorrection.h"
#endif
#ifdef __AVR__
# include <avr/wdt.h>
#endif
uint16_t copy_paste_timer;
bool host_driver_disabled = false;
@ -49,7 +46,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
#endif
// If console is enabled, it will print the matrix position and status of each key pressed
#ifdef KEYLOGGER_ENABLE
uprintf("KL: kc: 0x%04X, col: %2u, row: %2u, pressed: %b, time: %5u, int: %b, count: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed, record->event.time, record->tap.interrupted, record->tap.count);
uprintf("KL: kc: 0x%04X, col: %2u, row: %2u, pressed: %1d, time: %5u, int: %1d, count: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed, record->event.time, record->tap.interrupted, record->tap.count);
#endif // KEYLOGGER_ENABLE
#if defined(OLED_ENABLE) && defined(CUSTOM_OLED_DRIVER)
process_record_user_oled(keycode, record);

14
users/drashna/keyrecords/tapping.c
View File

@ -3,6 +3,7 @@
#include "drashna.h"
#ifdef TAPPING_TERM_PER_KEY
__attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case BK_LWER:
@ -11,7 +12,9 @@ __attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *r
return TAPPING_TERM;
}
}
#endif // TAPPING_TERM_PER_KEY
#ifdef PERMISSIVE_HOLD_PER_KEY
__attribute__((weak)) bool get_permissive_hold(uint16_t keycode, keyrecord_t *record) {
// Immediately select the hold action when another key is tapped:
// return true;
@ -22,7 +25,9 @@ __attribute__((weak)) bool get_permissive_hold(uint16_t keycode, keyrecord_t *re
return false;
}
}
#endif // PERMISSIVE_HOLD_PER_KEY
#ifdef HOLD_ON_OTHER_KEY_PRESS_PER_KEY
__attribute__((weak)) bool get_hold_on_other_key_press(uint16_t keycode, keyrecord_t *record) {
// Immediately select the hold action when another key is pressed.
// return true;
@ -32,10 +37,12 @@ __attribute__((weak)) bool get_hold_on_other_key_press(uint16_t keycode, keyreco
// case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
// return true;
default:
return true;
return false;
}
}
#endif // HOLD_ON_OTHER_KEY_PRESS_PER_KEY
#ifdef IGNORE_MOD_TAP_INTERRUPT_PER_KEY
__attribute__((weak)) bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) {
// Do not force the mod-tap key press to be handled as a modifier
// if any other key was pressed while the mod-tap key is held down.
@ -48,17 +55,22 @@ __attribute__((weak)) bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrec
return true;
}
}
#endif // IGNORE_MOD_TAP_INTERRUPT_PER_KEY
#ifdef TAPPING_FORCE_HOLD_PER_KEY
__attribute__((weak)) bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
default:
return false;
}
}
#endif // TAPPING_FORCE_HOLD_PER_KEY
#ifdef RETRO_TAPPING_PER_KEY
__attribute__((weak)) bool get_retro_tapping(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
default:
return false;
}
}
#endif // RETRO_TAPPING_PER_KEY

2
users/drashna/keyrecords/unicode.c
View File

@ -142,7 +142,7 @@ DEFINE_UNICODE_LUT_TRANSLATOR(unicode_lut_translator_super,
0x2071, // i
0x02B2, // j
0x1D4F, // k
0x1D4F, // l
0x02E1, // l
0x1D50, // m
0x207F, // n
0x1D52, // o

63
users/drashna/oled/oled_config.h Normal file
View File

@ -0,0 +1,63 @@
// Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#ifndef OLED_UPDATE_INTERVAL
# ifdef OLED_DRIVER_SH1107
# define OLED_UPDATE_INTERVAL 75
# else
# ifdef SPLIT_KEYBOARD
# define OLED_UPDATE_INTERVAL 60
# else
# define OLED_UPDATE_INTERVAL 15
# endif
# endif
#endif
#define OLED_DISABLE_TIMEOUT
#ifdef OLED_FONT_H
# undef OLED_FONT_H
#endif
#define OLED_FONT_H "oled/drashna_font.h"
#define OLED_FONT_END 255
// # define OLED_FONT_5X5
// # define OLED_FONT_AZTECH
// # define OLED_FONT_BMPLAIN
// # define OLED_FONT_CRACKERS
#define OLED_FONT_DEAD_MEAL
// # define OLED_FONT_EIN
// # define OLED_FONT_HISKYF21
// # define OLED_FONT_SQUASH
// # define OLED_FONT_ZXPIX
// # define OLED_FONT_SUPER_DIGG
// # define OLED_LOGO_BEBOP
// # define OLED_LOGO_CORNE
// # define OLED_LOGO_GMK_BAD
// # define OLED_LOGO_GOTHAM
// # define OLED_LOGO_HUE_MANITEE
// # define OLED_LOGO_LOOSE
#define OLED_LOGO_SCIFI
// # define OLED_LOGO_SETS3N
// # define OLED_LOGO_SKEEB
#ifdef OLED_DRIVER_SH1107
# define OLED_DISPLAY_CUSTOM
# define OLED_IC_SH1107 2
# define OLED_DISPLAY_128X128
# define OLED_DISPLAY_WIDTH 128
# define OLED_DISPLAY_HEIGHT 128
# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)
# define OLED_BLOCK_TYPE uint32_t
# define OLED_SOURCE_MAP \
{ 0, 8, 16, 24, 32, 40, 48, 56 }
# define OLED_TARGET_MAP \
{ 56, 48, 40, 32, 24, 16, 8, 0 }
# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)
# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
# define OLED_COM_PINS COM_PINS_ALT
# define OLED_IC OLED_IC_SH1107
# ifndef OLED_BRIGHTNESS
# define OLED_BRIGHTNESS 50
# endif
#endif

24
users/drashna/oled/oled_stuff.c
View File

@ -28,6 +28,8 @@
#endif
#include <string.h>
bool is_oled_enabled = true;
extern bool host_driver_disabled;
uint32_t oled_timer = 0;
@ -850,7 +852,7 @@ void render_status_right(void) {
render_layer_state(1, 2);
render_mod_status(get_mods() | get_oneshot_mods(), 1, 5);
#if !defined(OLED_DISPLAY_VERBOSE) && defined(WPM_ENABLE) && !defined(STM32F303xC)
render_wpm(2);
render_wpm(2, 7, 1);
#endif
render_keylock_status(host_keyboard_led_state(), 1, 6);
}
@ -929,16 +931,14 @@ __attribute__((weak)) bool oled_task_keymap(void) {
}
bool oled_task_user(void) {
if (is_keyboard_master()) {
#ifndef OLED_DISPLAY_TEST
if (timer_elapsed32(oled_timer) > 60000) {
oled_off();
return false;
} else
if (!is_oled_enabled) {
oled_off();
return false;
} else
#endif
{
oled_on();
}
{
oled_on();
}
if (!oled_task_keymap()) {
@ -990,3 +990,9 @@ bool oled_task_user(void) {
return false;
}
extern bool oled_initialized;
__attribute__((weak)) void matrix_scan_oled(void) {
is_oled_enabled = !(timer_elapsed32(oled_timer) > 60000);
}

2
users/drashna/oled/oled_stuff.h
View File

@ -44,6 +44,8 @@ void render_wpm_graph(uint8_t max_lines_graph, uint8_t vertical_offse
void render_kitty(uint8_t col, uint8_t line);
void render_unicode_mode(uint8_t col, uint8_t line);
void render_rgb_hsv(uint8_t col, uint8_t line);
void render_mouse_mode(uint8_t col, uint8_t line);
void matrix_scan_oled(void);
void oled_pan_section(bool left, uint16_t y_start, uint16_t y_end, uint16_t x_start, uint16_t x_end);

6
users/drashna/pointing/pointing.c
View File

@ -22,7 +22,7 @@ __attribute__((weak)) report_mouse_t pointing_device_task_keymap(report_mouse_t
}
report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) {
int8_t x = mouse_report.x, y = mouse_report.y;
mouse_xy_report_t x = mouse_report.x, y = mouse_report.y;
mouse_report.x = 0;
mouse_report.y = 0;
@ -33,8 +33,8 @@ report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) {
#endif
if (timer_elapsed(mouse_debounce_timer) > TAP_CHECK) {
if (enable_acceleration) {
x = (x > 0 ? x * x / 16 + x : -x * x / 16 + x);
y = (y > 0 ? y * y / 16 + y : -y * y / 16 + y);
x = (mouse_xy_report_t)(x > 0 ? x * x / 16 + x : -x * x / 16 + x);
y = (mouse_xy_report_t)(y > 0 ? y * y / 16 + y : -y * y / 16 + y);
}
mouse_report.x = x;
mouse_report.y = y;

16
users/drashna/post_config.h
View File

@ -113,13 +113,17 @@
# endif
#endif // MOUSEKEY_ENABLE
#if !defined(LAYER_STATE_16BIT) && !defined(LAYER_STATE_8BIT) && !defined(LAYER_STATE_32BIT)
# define LAYER_STATE_16BIT
#endif
#ifndef DYNAMIC_KEYMAP_LAYER_COUNT
# define DYNAMIC_KEYMAP_LAYER_COUNT 11
#endif
#define MOUSE_EXTENDED_REPORT
#ifndef TAPPING_TERM
# define TAPPING_TERM 175
#endif
#ifndef SECURE_UNLOCK_SEQUENCE
# define SECURE_UNLOCK_SEQUENCE \
{ \
{2, 1}, {2, 2}, {2, 3}, { \
2, 4 \
} \
}
#endif

107
users/drashna/rgb/rgb_matrix_config.h Normal file
View File

@ -0,0 +1,107 @@
// Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
// # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#undef ENABLE_RGB_MATRIX_ALPHAS_MODS
#undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
#undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
#undef ENABLE_RGB_MATRIX_BREATHING
#undef ENABLE_RGB_MATRIX_BAND_SAT
#undef ENABLE_RGB_MATRIX_BAND_VAL
#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
#undef ENABLE_RGB_MATRIX_CYCLE_ALL
#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN
#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
#undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL
#undef ENABLE_RGB_MATRIX_DUAL_BEACON
#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON
#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
#undef ENABLE_RGB_MATRIX_RAINDROPS
#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
#undef ENABLE_RGB_MATRIX_HUE_BREATHING
#undef ENABLE_RGB_MATRIX_HUE_PENDULUM
#undef ENABLE_RGB_MATRIX_HUE_WAVE
#undef ENABLE_RGB_MATRIX_PIXEL_RAIN
#undef ENABLE_RGB_MATRIX_PIXEL_FLOW
#undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
#undef ENABLE_RGB_MATRIX_TYPING_HEATMAP
#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN
// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE
#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
#undef ENABLE_RGB_MATRIX_SPLASH
#undef ENABLE_RGB_MATRIX_MULTISPLASH
#undef ENABLE_RGB_MATRIX_SOLID_SPLASH
#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
#if !defined(SPLIT_KEYBOARD) && !defined(KEYBOARD_ergodox_ez) && !defined(KEYBOARD_moonlander)
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
#endif
#if defined(__arm__) || defined(__AVR_AT90USB1286__) || defined(KEYBOARD_launchpad)
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_BREATHING
# define ENABLE_RGB_MATRIX_BAND_SAT
# define ENABLE_RGB_MATRIX_BAND_VAL
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
# define ENABLE_RGB_MATRIX_CYCLE_ALL
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
# define ENABLE_RGB_MATRIX_DUAL_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
# define ENABLE_RGB_MATRIX_RAINDROPS
# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# define ENABLE_RGB_MATRIX_HUE_BREATHING
# define ENABLE_RGB_MATRIX_HUE_PENDULUM
# define ENABLE_RGB_MATRIX_HUE_WAVE
# define ENABLE_RGB_MATRIX_PIXEL_RAIN
# define ENABLE_RGB_MATRIX_PIXEL_FLOW
# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define ENABLE_RGB_MATRIX_SPLASH
# define ENABLE_RGB_MATRIX_MULTISPLASH
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#endif // AVR

8
users/drashna/rgb/rgblight_config.h Normal file
View File

@ -0,0 +1,8 @@
// Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
# define RGBLIGHT_SLEEP
# define RGBLIGHT_EFFECT_TWINKLE_LIFE 250
# define RGBLIGHT_EFFECT_TWINKLE_PROBABILITY 1 / 24

9
users/drashna/rules.mk
View File

@ -36,6 +36,10 @@ ifeq ($(strip $(PROTOCOL)), VUSB)
NKRO_ENABLE := no
endif
ifeq ($(strip $(PER_KEY_TAPPING)), yes)
OPT_DEFS += -DPER_KEY_TAPPING
endif
CUSTOM_UNICODE_ENABLE ?= yes
ifeq ($(strip $(CUSTOM_UNICODE_ENABLE)), yes)
UNICODE_ENABLE := no
@ -83,6 +87,11 @@ ifdef CONSOLE_ENABLE
endif
endif
ifeq ($(strip $(I2C_SCANNER_ENABLE)), yes)
OPT_DEFS += -DI2C_SCANNER_ENABLE
CONSOLE_ENABLE := yes
endif
CUSTOM_OLED_DRIVER ?= yes
ifeq ($(strip $(OLED_ENABLE)), yes)
ifeq ($(strip $(OLED_DRIVER)), custom)

21
users/drashna/split/split_config.h Normal file
View File

@ -0,0 +1,21 @@
// Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
// # define SPLIT_TRANSPORT_MIRROR
#define SPLIT_LAYER_STATE_ENABLE
#define SPLIT_LED_STATE_ENABLE
#define SPLIT_MODS_ENABLE
#ifdef WPM_ENABLE
# define SPLIT_WPM_ENABLE
#endif
#ifdef OLED_ENABLE
# undef SPLIT_OLED_ENABLE
#endif
#if defined(__AVR__) && !defined(SELECT_SOFT_SERIAL_SPEED)
# define SELECT_SOFT_SERIAL_SPEED 1
#endif
#ifdef CUSTOM_SPLIT_TRANSPORT_SYNC
# define SPLIT_TRANSACTION_IDS_USER RPC_ID_USER_STATE_SYNC, RPC_ID_USER_KEYMAP_SYNC, RPC_ID_USER_CONFIG_SYNC, RPC_ID_USER_WATCHDOG_SYNC, RPC_ID_USER_KEYLOG_STR
#endif

14
users/drashna/split/transport_sync.c
View File

@ -4,9 +4,6 @@
#include "transport_sync.h"
#include "transactions.h"
#include <string.h>
#ifdef __AVR__
# include <avr/wdt.h>
#endif
#ifdef UNICODE_COMMON_ENABLE
# include "process_unicode_common.h"
@ -18,6 +15,9 @@ extern unicode_config_t unicode_config;
extern audio_config_t audio_config;
extern bool delayed_tasks_run;
#endif
#if defined(OLED_ENABLE) && !defined(SPLIT_OLED_ENABLE) && defined(CUSTOM_OLED_DRIVER)
extern bool is_oled_enabled;
#endif
#if defined(POINTING_DEVICE_ENABLE) && defined(KEYBOARD_handwired_tractyl_manuform)
extern bool tap_toggling;
#endif
@ -95,6 +95,9 @@ void user_transport_update(void) {
user_state.audio_enable = is_audio_on();
user_state.audio_clicky_enable = is_clicky_on();
#endif
#if defined(OLED_ENABLE) && !defined(SPLIT_OLED_ENABLE) && defined(CUSTOM_OLED_DRIVER)
user_state.is_oled_enabled = is_oled_enabled;
#endif
#if defined(CUSTOM_POINTING_DEVICE)
user_state.tap_toggling = tap_toggling;
#endif
@ -116,6 +119,9 @@ void user_transport_update(void) {
unicode_config.input_mode = user_state.unicode_mode;
typing_mode = user_state.unicode_typing_mode;
#endif
#if defined(OLED_ENABLE) && !defined(SPLIT_OLED_ENABLE) && defined(CUSTOM_OLED_DRIVER)
is_oled_enabled = user_state.is_oled_enabled;
#endif
#if defined(CUSTOM_POINTING_DEVICE)
tap_toggling = user_state.tap_toggling;
#endif
@ -226,7 +232,7 @@ void user_transport_sync(void) {
}
} else {
if (timer_elapsed32(watchdog_timer) > 3500) {
software_reset();
mcu_reset();
while (1) {
}
}

1
users/drashna/split/transport_sync.h
View File

@ -19,6 +19,7 @@ typedef union {
bool swap_hands :1;
bool host_driver_disabled :1;
uint8_t unicode_typing_mode :3;
bool is_oled_enabled :1;
};
} user_runtime_config_t;