Commit Graph

86 Commits

Author SHA1 Message Date
Michael Büchler 4d994458f0
Document the RP2040-specific PS/2 implementation (#22079)
Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com>
2023-09-25 13:00:13 +10:00
Dasky 16f2a3e2f8
Add missing gpio include to ps2 vendor (#22063) 2023-09-18 19:55:51 +01:00
Constantine Karos 1fbd45a594
Add missing gpio and chibios defs to uart.h (#22033) 2023-09-17 13:18:26 +01:00
Nebuleon e971ce290c
Remove needless precision in additive DAC sample generation (#21498) 2023-07-26 21:06:14 -07:00
Nebuleon 821db155f2
Fix stuck note with square wave in additive DAC (#21589) 2023-07-26 21:00:27 -07:00
Nebuleon a5e33b1c28
Allow the user to select one tone for the additive DAC (#21591)
Previously, if the user tried to use `#define AUDIO_MAX_SIMULTANEOUS_TONES 1` to conserve CPU time, their firmware would fail to build with this error:

```
platforms/chibios/drivers/audio_dac_additive.c:91:73: error: excess elements in array initializer [-Werror]
   91 | static float   active_tones_snapshot[AUDIO_MAX_SIMULTANEOUS_TONES] = {0, 0};
      |                                                                          ^
```

This also affected the preset `#define AUDIO_DAC_QUALITY_VERY_HIGH`, which called up only one simultaneous tone at 88200 Hz.
2023-07-23 11:44:41 +01:00
Ryan da2d2f947d
quantum: remove direct `quantum.h` includes (#21507) 2023-07-16 23:42:56 +10:00
Ryan b6d9409d2f
drivers: remove direct `quantum.h` includes (#21473) 2023-07-09 20:03:50 +10:00
Ryan cb2331713c
Relocate backlight drivers (#21444) 2023-07-08 23:13:10 +10:00
Sergey Vlasov b708658e2e
usbpd_stm32g4: Configure UCPD before disabling the dead battery mode (#21430) 2023-07-03 08:53:54 +10:00
Drashna Jaelre cf5626e024
[Bug] Fix compilation issues with PS/2 driver on F4x1 controllers (#20433) 2023-04-12 21:43:27 -07:00
Ryan 47966dc2a6
Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
Nick Brassel 06c5c02804
Disable specific warnings to mitigate compilation problems with `KEEP_INTERMEDIATES=yes`. (#20339) 2023-04-05 14:59:09 +10:00
Ryan 647c2835e6
WS2812 driver improvements (#20262) 2023-03-30 12:21:02 +11:00
Marek Kraus e640fd65ff
[Core] PS/2 PIO Driver for RP2040 (#17893)
Co-authored-by: Johannes H. Jensen <joh@pseudoberries.com>
2023-03-25 11:48:28 +01:00
Sergey Vlasov 81ca83296f
analog.c: Fix `pinToMux()` for STM32F0xx (#19658)
The `adc_read()` code for STM32F0xx expects to get the 0-based channel
number in `mux.input`, but the `pinToMux()` code for STM32F0xx was
attempting to pass the CHSELR bit mask in that field, which resulted in
selecting a wrong channel, therefore `analogReadPin()` did not work
properly for the STM32F0xx chips.  Fix `pinToMux()` to put the channel
number in that field (this matches the behavior for other supported
chips and also allows selection of channels 16...18, which can be used
to access the builtin temperature, reference voltage and VBAT sensors).
2023-01-25 01:47:55 +00:00
Stefan Kerkmann 8ca3f0fb7c
[Bug] rp2040: fix timer wrap deadlock in ws2812 vendor driver (#19652)
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
2023-01-23 22:24:21 +01:00
David Hoelscher aea1194ea3
Corrections to uart driver for Chibios platform (#19075) 2023-01-24 07:05:47 +11:00
Ryan cf935d97ae
Fix functions with empty params (#19647)
* Fix functions with empty params

* Found a bunch more
2023-01-20 16:21:17 +00:00
Sergey Vlasov 272281f1a0
Add analog support for RP2040 (#19453)
Co-authored-by: Ryan <fauxpark@gmail.com>
2023-01-19 10:30:58 +11:00
Stefan Kerkmann ec09087543
Update ChibiOS[-Contrib], SIO driver, configs (#17915)
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-01-12 21:47:36 +11:00
Nick Brassel cf3c26533c
Fixup EFL and F4's sector selection. (#19221) 2022-12-02 21:55:28 +11:00
Nick Brassel bebfdad795
NVRAM refactor, phase 1. (#18969)
* Rename `eeprom_stm32` to `eeprom_legacy_emulated_flash`.

* Rename `flash_stm32` to `legacy_flash_ops`.

* Rename `eeprom_teensy` to `eeprom_kinetis_flexram`.
2022-11-23 08:50:19 +00:00
Nick Brassel 092228571c
Move EFL wear-leveling driver to be default for F1, F3, F4, L4, G4, WB32, GD32V. (#19020) 2022-11-11 23:57:44 +00:00
jack dad5262425
Fixup WS2812 vendor driver (#19028) 2022-11-11 09:38:13 +11:00
Stefan Kerkmann 27dec8d16d
[Core] Allow custom timings for WS2812 PIO driver (#18006) 2022-11-10 07:58:15 +11:00
Joy Lee 9435ad19ee
Added analog support for WB32 MCU. (#18289)
Co-authored-by: Joy <chang.li@westberrytech.com>
2022-11-01 15:04:15 +11:00
Stefan Kerkmann 19145704e4
[Core] Adjust PWM hardware audio driver for RP2040 (#17723) 2022-10-27 19:26:16 +02:00
Thomas Kriechbaumer c4f99f06ab
ws2812: replace RGBLED_NUM with driver-owned constant to decouple driver from RGBLEDs/RGBMATRIX defines (#18036) 2022-10-21 08:17:51 +11:00
Stefan Kerkmann b6ea8837e4
[Bug] RP2040: only clear RX FIFO for serial pio driver clear (#18581) 2022-10-04 19:56:40 +01:00
Stefan Kerkmann 6bbcabe0cc
[Core] Serial-protocol: always clear receive queue on main half of split keyboard (#18419) 2022-10-03 18:23:45 +02:00
Stefan Kerkmann 881aab9e76
Stabilize Half-duplex PIO split comms take 2 (#18421)
...by moving the actually timing critical `enter_rx_state()` and
`leave_rx_state()` functions to RAM in order to not be affected by XIP
cache spikes. This commit also reverts the hacky USB interrupt disabling
that was done in 293c53d774
2022-09-20 08:54:43 +02:00
Ryan 33c47fe010
Add UART support for Kinetis boards (#18370)
* Add UART support for Kinetis boards

* Default PAL mode for GPIOV1
2022-09-17 02:24:03 +01:00
Jeff Epler 9632360caa
Use a macro to compute the size of arrays at compile time (#18044)
* Add ARRAY_SIZE and CEILING utility macros

* Apply a coccinelle patch to use ARRAY_SIZE

* fix up some straggling items

* Fix 'make test:secure'

* Enhance ARRAY_SIZE macro to reject acting on pointers

The previous definition would not produce a diagnostic for
```
int *p;
size_t num_elem = ARRAY_SIZE(p)
```
but the new one will.

* explicitly get definition of ARRAY_SIZE

* Convert to ARRAY_SIZE when const is involved

The following spatch finds additional instances where the array is
const and the division is by the size of the type, not the size of
the first element:
```
@ rule5a using "empty.iso" @
type T;
const T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)

@ rule6a using "empty.iso" @
type T;
const T[] E;
@@

- sizeof(E)/sizeof(T)
+ ARRAY_SIZE(E)
```

* New instances of ARRAY_SIZE added since initial spatch run

* Use `ARRAY_SIZE` in docs (found by grep)

* Manually use ARRAY_SIZE

hs_set is expected to be the same size as uint16_t, though it's made
of two 8-bit integers

* Just like char, sizeof(uint8_t) is guaranteed to be 1

This is at least true on any plausible system where qmk is actually used.

Per my understanding it's universally true, assuming that uint8_t exists:
https://stackoverflow.com/questions/48655310/can-i-assume-that-sizeofuint8-t-1

* Run qmk-format on core C files touched in this branch

Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2022-08-30 10:20:04 +02:00
Nick Brassel 1eac095c0c
Use the correct bootloader definition. (#18102) 2022-08-19 05:20:44 +01:00
Joel Challis 463fb72d29
Partially revert some WB32 specific changes (#18038) 2022-08-14 20:48:44 +01:00
yiancar dfc92d8f7b
Fix buffer size for WS2812 PWM driver (#17046)
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
Co-authored-by: yiancar <yiancar@gmail.com>
2022-08-13 18:36:34 -07:00
Joy Lee c02d7ae86f
Added ws2812_pwm support for WB32 MCU. (#17142)
Co-authored-by: Joy <chang.li@westberrytech.com>
2022-08-13 18:21:46 -07:00
Joy Lee 6b1c7d20aa
Added ws2812_spi support for WB32 MCU (#17143)
Co-authored-by: Joy <chang.li@westberrytech.com>
2022-08-13 18:09:57 -07:00
Joy Lee 19ce1418ba
Added implementation of WB32 MCU wear_leveling_efl. (#17579) 2022-08-13 02:14:33 +01:00
Nick Brassel d9eb152a90
Fix issue with #17904. (#17905) 2022-08-04 22:15:42 +10:00
Nick Brassel 94e8701b3e
Fixup compilation of printf-like functions with uint32_t args. (#17904) 2022-08-04 21:44:56 +10:00
Stefan Kerkmann a204523bbb
[Core] RP2040 disable PIO IRQs on serial timeout (#17839) 2022-07-29 20:13:16 +02:00
Stefan Kerkmann 157ea96411
ChibiOS: use correct status codes in i2c_master.c (#17808)
msg_t is MSG_OK in the success case and either MSG_RESET or MSG_TIMEOUT
in case of errors. So actually use them in the comparison.
2022-07-28 02:02:10 +01:00
Stefan Kerkmann 083b42068a
Chibios: Stop I2C peripheral on transaction error (#17798)
From the ChibiOS HAL I2C driver pages:

After a timeout the driver must be stopped and restarted because the bus is in
an uncertain state.

This commit does that stopping explicitly on any error that occurred, not only
timeouts. As all the i2c functions restart the peripheral if necessary it is
safe to do so.

Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com>

Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com>
2022-07-26 21:40:14 +02:00
Nick Brassel dc70ba612a
Post-bootloader EFL/SPI fixes. (#17661)
* Fixup read address for EFL driver.

* Fixup sequencing of SPI.

* Lock during init of EFL backing store.
2022-07-14 00:41:08 +10:00
Nick Brassel dfff040433
Allow MCU-specific overrides for SPI flags. (#17650) 2022-07-13 14:42:24 +10:00
Stefan Kerkmann 3f5dc47296
[Core] Use polled waiting on ChibiOS platforms that support it (#17607)
* Use polled waiting on platforms that support it

Due to context switching overhead waiting a very short amount of time on
a sleeping thread is often not accurate and in fact not usable for timing
critical usage i.e. in a driver. Thus we use polled waiting for ranges
in the us range on platforms that support it instead. The fallback is
the thread sleeping mechanism.

This includes:

* ARM platforms with CYCCNT register (ARMv7, ARMv8) this is
  incremented at CPU clock frequency
* GD32VF103 RISC-V port with CSR_MCYCLE register this is incremented at
  CPU clock frequency
* RP2040 ARMv6 port which uses the integrated timer peripheral which is
  incremented with a fixed 1MHz frequency

* Use wait_us() instead of chSysPolledDelayX

...as it is powered by busy waiting now.

* Add chibios waiting methods test bench
2022-07-11 15:17:05 +02:00
Stefan Kerkmann 0348071810
Stabilize Half-duplex PIO split comms (#17612) 2022-07-11 04:05:04 -07:00
Nick Brassel 29a2bac469
Fixup SPI. (#17534) 2022-07-05 22:41:35 +02:00