* Add script to build all bcat keymaps at once
* Move userspace RGB to separate source file
* Move layer handling logic into userspace
* Move keycap aliases into userspace
* Add OLED userspace library and Lily58 OLED setup
* Add Luna keyboard pet, generic OLED pet framework
Luna artwork and original implementation by HellSingCoder, licensed
under GPL v2.0.
See also: 6dfe915e26/keyboards/sofle/keymaps/helltm/keymap.c
* Use OLED on bcat's Crkbd
I had to turn off a few unused features to address firmware size limits.
* Remove vestigial NK_TOGG keybindings
* Add post-render hook to OLED pet API
This enables OLED pets to draw custom widgets (e.g., LED indicator
status) on top of their animation frames.
* Add Isda keyboard pet
For future use on my Unicorne keyboard. Unicorn artwork by sparrow666,
licensed under GPL v2.0.
See also: https://opengameart.org/content/unicorn-2
* Replace OLED timeout implementation with custom
The default implementation never lets the OLED turn off if a continuous
animation is in progress. The custom one does.
* Move keyboard state for OLED functions into struct
No change in firmware size, but makes keymaps read a little nicer and
enables more functionality in OLED pets.
* Enable continuously running OLED pet (for Luna)
* Sync OLED state; enable Bootmagic only when needed
The new extensible split transport for Split Common finally allows OLED
on/off status to be synced between halves of the keyboard. :)
Unfortunately, this required disabling Bootmagic Lite to keep my Crkbd
under the firmware size limit. (I now after 28 bytes free on avr-gcc
version 8.5.0.) So now I'll enable Bootmagic only on keyboards that
actually require it, i.e., ones lacking an accessible reset button.
* Update 9-Key macropad keymap for working from home
* Remove includes redundant with quantum.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Simplify BCAT_OLED_PET makefile logic
* Swap some keys on my 9-Key macropad around
* Inline spurious variable in OLED code
* Remove max brightness that's now set by default
The default max brightness is only 120 rather than 150, but that might
actually fix some weirdness I've seen with bright white LED settings.
* Enable specific RGBLIGHT modes instead of default
The general trend these days seems to be enabling only the modes you
want, so I'm manually expanding the ones currently enabled by
RGBLIGHT_ANIMATIONS.
I'd like to try out the TWINKLE mode too, but it seems not to work at
all on ARM right now, and all my usable RGBLIGHT keebs are ARM boards.
* Reenable RGB_MATRIX animations after #15018
My Crkbd still has a reasonable amount of free space with these:
27974/28672 (97%, 698 bytes free). The RGB_MATRIX_KEYPRESSES effects
would put it over the firmware size limit, but I really don't ever use
those anyway.
* Use new get_u8_str function for WPM display
Co-authored-by: Drashna Jaelre <drashna@live.com>
This commit makes the mode keys transparent in the LOWER layer instead
of disabled.
Before this commit, the following sequence of key presses `LGUI+LOWER+l`
would translate into `Cmd+right` in macOS and, therefore, move the
cursor to the end of line.
But, pressing `LOWER+LGUI+l` would completely ignore the `LGUI` and,
therefore, move the cursor one letter to the right.
With this change, pressing `LOWER+LGUI+l` produces the same result as
`LGUI+LOWER+l`.
This is also true for multiple other combinations, like
`RALT+SHIFT+LOWER+l`, `LOWER+RALT+SHIFT+l`, `SHIFT+LOWER+RALT+l`, etc.
Co-authored-by: Gaston Jorquera <gjorquera@gmail.com>
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
Fix reddit link
Duplicate open parenthesis next to close parenthesis on NSSL
Add customisation instructions
Add lily58
Add gergo
Co-authored-by: Jonathan Dayton <jonathandayton23@gmail.com>
Clean up LAYOUT macro formatting
Add alternative vi-style navigation layout
Add kyria
Add minidox
Change order of keyboards
Add iris
Expand TOC
Re-order userspace subheadings
Add atreus
Add customisation section
Add split_3x5_3 and split_3x6_3 layouts
Add for_science
Fix wrong paths in keyboard config.h and keymap.c headings
Fix keyboard ordering
Fix blank lines around headings
Add compatibility with new org-mode version.
Remove keyboards/crkbd now covered by layouts/split_3x6_3
Add Halmak
Alphabetise alternative alpha arrangements
Move build options out of base layer alphas headings
Add list of keyboards supporting split_3x5_3 layout
Enable Auto Shift and Retro Shift
Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)
Change kyria thumb key mapping
Add planck_mit layout
Remove alternative bottom row support from ortho_4x12
Remove minidox
- Covered by split_3x5_3 layout
Add moonlander
Remove KC_ macros
Add 60_ansi layout
Add ortho_5x15 layout
Closesmanna-harbour/qmk_firmware#5
Co-authored-by: Rob <rob@debank.tv>
Fix typo (manna-harbour/qmk_firmware#7)
Author: sonnius <sonnius@users.noreply.github.com>
Add redox_w (manna-harbour/qmk_firmware#8)
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>
Add AUTO_SHIFT_NO_SETUP to reduce firmware size
Update image paths
Add instructions to checkout development branch
Add kyria extended thumbs option, change default, add KLE
Change clipboard keys
- Change order to be mirror of windows bindings
- Change default to use CUA bindings for Cut, Copy, and Paste, and Fun Cluster
bindings for Undo and Redo
- Add alternative bindings
- Fun Cluster (original miryoku bindings)
- Mac
- Windows
- Change prefix for local macros from X_ to U_
Disable Retro Shift, enable Auto Shift for non-alphas
Revert "Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping)"
Add Experimental Features section
Update miryoku image link
Update cover image link
Add dactyl_manuform/4x5
Add cutomisation examples
Add https to remote example
Fix dactyl_manuform/4x5 subset mapping
Add extended thumbs to ortho_4x12
Update Colemak Mod-DH naming
Closesmanna-harbour/qmk_firmware#13
Add dactyl_manuform/5x6
Resolvesmanna-harbour/qmk_firmware#14
Co-authored-by: Sebastian Morales <sebastian.moralesd@gmail.com>
Add note on FORCE_LAYOUT
- Needed to use EXTENDED_THUMBS on planck
Add parent directories to keyboard headings and re-order
Add keyboardio/atreus
Resolvesmanna-harbour/qmk_firmware#15
Add torn
Resolvesmanna-harbour/qmk_firmware#16
Author: Brian Romanko <hello@bromanko.com>
Co-authored-by: Manna Harbour <51143715+manna-harbour@users.noreply.github.com>
Change map to zip
- Adds support for python3, still compatible with python2.
Resolvesmanna-harbour/qmk_firmware#10Resolvesmanna-harbour/qmk_firmware#19
Co-authored-by: Ori <ori@oribarbut.com>
Add python-version
Add sofle
Add ergotravel
Add ortho_5x12
Add ortho_4x10
Add :main no header argument to C code blocks
resolvesmanna-harbour/qmk_firmware#11resolvesmanna-harbour/qmk_firmware#12
Co-authored-by: RubioJr9 <u0893472@utah.edu>
Add flipped layers and inverted-T nav alternative layouts
- Separate tap_table into alphas_table and thumbs_table
- Add mode argument to table-layout-half
- Remove layer_name
- Rename layers
- Add mods and clipboard to MBO and mirror
- Add MIRYOKU_LAYERS=FLIP
- Add MIRYOKU_NAV=INVERTEDT
Add layer diagrams
Update contact section
Update links for Bilateral Combinations and Retro Shift
Add description and no reverse angle option to 60_ansi layout
Update list of keyboards supporting community layouts
- and example build command lines
Change moonlander thumb keys
Update list of keyboards supporting split_3x5_3
Add license to tangled C source files
* Add Per Key functionality for AutoShift (#11536)
* LED Matrix: Reactive effect buffers & advanced indicators (#12588)
* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)
* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)
* LED Matrix: Split (#12633)
* [CI] Format code according to conventions (#12650)
* feat: infinite timeout for leader key (#6580)
* feat: implement leader_no_timeout logic
* docs(leader_key): infinite leader timeout docs
* Format code according to conventions (#12680)
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)
* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)
Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).
* Update ADC docs to match the actually used resolution
ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly. Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).
* Fix pinToMux() for B12 and B13 on STM32F3xx
Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.
* Add support for all possible analog pins on STM32F1xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families). Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).
Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.
* Add support for all possible analog pins on STM32F4xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.
Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.
Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.
* Fix STM32F3xx ADC mux table in documentation
The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).
* Add STM32F1xx ADC pins to the documentation
* Add STM32F4xx ADC pins to the documentation
* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.
* Update flashing.md
* Update chconf.h
* Update config.h
* Update halconf.h
* Update mcuconf.h
* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)
* Add support for MCU = STM32F446 (#12619)
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
* Format code according to conventions (#12682)
* Format code according to conventions (#12687)
* Add STM32L433 and L443 support (#12063)
* initial L433 commit
* change to XC
* fix L433
* disable all peripherals
* update system and peripheral clocks
* 433 change
* use its own board files
* revert its own board files
* l433 specific change
* fix stm32l432xx define
* remove duplicate #define
* fix bootloader jump
* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h
* move to L443
* move to L443
* fix sdmmc in mcuconf.h
* include STM32L443
* add L443
* Include L443 in compatible microcontrollers
* Include L443 in compatible microcontrollers
* Update config bootloader jump description
* Update ChibiOS define reasoning
* Update quantum/mcu_selection.mk
* fix git conflict
* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)
* Fix bad PR merge for #6580. (#12721)
* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)
* [CI] Format code according to conventions (#12731)
* Fixing transport's led/rgb matrix suspend state logic (#12770)
* [CI] Format code according to conventions (#12772)
* Fix comment parsing (#12750)
* Added OLED fade out support (#12086)
* fix some references to bin/qmk that slipped in (#12832)
* Resolve a number of warnings in `qmk generate-api` (#12833)
* New command: qmk console (#12828)
* stash poc
* stash
* tidy up implementation
* Tidy up slightly for review
* Tidy up slightly for review
* Bodge environment to make tests pass
* Refactor away from asyncio due to windows issues
* Filter devices
* align vid/pid printing
* Add hidapi to the installers
* start preparing for multiple hid_listeners
* udev rules for hid_listen
* refactor to move closer to end state
* very basic implementation of the threaded model
* refactor how vid/pid/index are supplied and parsed
* windows improvements
* read the report directly when usage page isn't available
* add per-device colors, the choice to show names or numbers, and refactor
* add timestamps
* Add support for showing bootloaders
* tweak the color for bootloaders
* Align bootloader disconnect with connect color
* add support for showing all bootloaders
* fix the pyusb check
* tweaks
* fix exception
* hide a stack trace behind -v
* add --no-bootloaders option
* add documentation for qmk console
* Apply suggestions from code review
* pyformat
* clean up and flesh out KNOWN_BOOTLOADERS
* Remove pointless SERIAL_LINK_ENABLE rules (#12846)
* Make Swap Hands use PROGMEM (#12284)
This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.
* Fix another bin/qmk reference (#12856)
* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)
* Fixup build errors on `develop` branch. (#12723)
* LED Matrix: Effects! (#12651)
* Fix syntax error when compiling for ARM (#12866)
* Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT
* remove KEYMAP and LAYOUT_kc
* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)
* Rename `point_t` -> `led_point_t` (#12864)
* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)
* Add missing LED Matrix suspend code to suspend.c (#12878)
* LED Matrix: Documentation (#12685)
* Deprecate `send_unicode_hex_string()` (#12602)
* Fix spelling mistake regarding LED Matrix in split_common. (#12888)
* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)
* Use milc.subcommand.config instead of qmk.cli.config (#12915)
* Use milc.subcommand.config instead
* pyformat
* remove the config test
* Add function to allow repeated blinking of one layer (#12237)
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time
* Update doc
* Rework rgblight blinking according to requested change
* optimize storage
* Fixup housekeeping from being invoked twice per loop. (#12933)
* matrix: wait for row signal to go HIGH for every row (#12945)
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/
Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.
After this commit, all keyboard matrix rows are interpreted correctly.
I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
* ensure we do not conflict with existing keymap aliases (#12976)
* Add support for up to 4 IS31FL3733 drivers (#12342)
* Convert Encoder callbacks to be boolean functions (#12805)
* [Keyboard] Fix Terrazzo build failure (#12977)
* Do not hard set config in CPTC files (#11864)
* [Keyboard] Corne - Remove legacy revision support (#12226)
* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)
* Add Full-duplex serial driver for ARM boards (#9842)
* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)
* Backlight: add defines for default level and breathing state (#12560)
* Add dire message about LUFA mass storage bootloader (#13014)
* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)
Was causing compiler errors on some systems.
* Fix keyboards/keymaps for boolean encoder callback changes (#12985)
* `backlight.c`: include `eeprom.h` (#13024)
* Add changelog for 2021-05-29 Breaking Changes merge (#12939)
* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version
* Add recent develop changes
* Sort recent develop changes
* Remove sections for ChibiOS changes per tzarc
No ChibiOS changes this round.
* Add and sort recent develop changes
* add notes about keyboard moves/deletions
* import changelog for PR 12172
Documents the change to BOOTMAGIC_ENABLE.
* update section headings
* re-sort changelog
* add additional note regarding Bootmagic changes
* remove changelog timestamp
* update dates in main Breaking Changes docs
* fix broken section anchors in previous changelogs
* add link to backlight/eeprom patch to changelog
* highlight some more changes
* link PRs from section headers
* Restore standard readme
* run: qmk cformat --core-only
* Fix triggering of adjust layer in default lily58 keymap
* Remove unused extern
* Swap raise/lower in update_tri_layer_state call to match recommendation in PR checklist
* Initialize domnantas layout
* Update oled status display
* Layout and oled changes
* Updates to keymap
* Add F keys and page moves
* Add media keys, rearrange home and end
* Add instructions
* Swap backspace and enter
* Remove unnecesary Enter keymap
* - Change display timeout
- Update minus sign to work on both English and Lithuanian layouts
* Add copyright header
* Replace static strings with PSTR
* Update keyboards/lily58/keymaps/domnantas/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lily58/keymaps/domnantas/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lily58/keymaps/domnantas/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lily58/keymaps/domnantas/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/lily58/keymaps/domnantas/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* [Keymap] own Lily58 keymap
Signed-off-by: Christian Eiden <christian@eiden.ch>
* adjustments of personal keymap
Signed-off-by: Christian Eiden <christian@eiden.ch>
* added my keymap
* Tidy up
Add readme, run clang-format, remove some comments
* Fixed some formatting issues
* Update after reading PR checklist
Add GPL header to keymap.c, remove backslash in LAYOUT macro
* Use integer constants for switch labels
* Remove unneeded code, remove F-keys from raise layer
* Use program memory for some text on OLED
* Fixed left over debug code
* tidy up config.h and rules.mk
Remove all unused defines from config.h, and remove options which are the same as the keyboard level make file. Enabled command to be able to toggle NKRO.
Add Eco keymap, factor Crkbd keymap to community layout, other minor tweaks
* Remove outdated Crkbd Ctrl key positioning info
* Add Left Alt key to Lily58 keymap
* Lily58 no longer overrides default TAPPING_TERM
* Refactor Crkbd keymap to use new community layout
* Fix underglow animations for Crkbd w/ Split Common
* Add initial Eco keymap
* Update outdated reference to Crkbd layout
* Add keymap links to userspace readme
* Add copyright notices to files changed in this PR
* Better handle LTO_ENABLE
Especially when calling from command line
* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE
* Remove long for LTO from show_options.mk
druotoni
Gianluca D'Abrosca
Jonathan Rascher
Ryan
Gastón Jorquera
Drashna Jaelre
pttbx
Manna Harbour
Xelus22
James Young
QMK Bot
David Dansby
Domantas
Manassarn "Noom" Manoonchai
Nick Brassel
Albert Y
Dan Carroll
Joel Challis
Christian Eiden
Zach White
Barabas
Ben
Naoki Katahira
Max Drasbeck
muuko
Darren Meehan