masq
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/donutcables/budget96
History
MechMerlin dbce3f648b Budget96 Production PCB Fix (#6900) 
* production version of the PCB has the top two right most keys swapped around. There are only 6 protos in existence and one of them is mine so we can just do this.

* update readme by adding backticks
 		2019-10-06 04:19:49 +11:00
..
keymaps/default
…
budget96.c [Keyboard][Fix] budget96 RGB light-switches (#6840) 2019-09-30 10:59:34 -07:00
budget96.h Budget96 Production PCB Fix (#6900) 2019-10-06 04:19:49 +11:00
config.h Remove NO_BACKLIGHT_CLOCK (#6418) 2019-07-27 01:37:33 +01:00
info.json
…
readme.md Budget96 Production PCB Fix (#6900) 2019-10-06 04:19:49 +11:00
rules.mk Cleanup rules.mk for 32A and 328P keyboards (#6767) 2019-09-20 22:06:32 -07:00
usbconfig.h
…

readme.md

budget96

96 key atmega32a keyboard.

Keyboard Maintainer: MechMerlin
Hardware Supported: Budget96 PCB
Hardware Availability: DonutCables

Make example for this keyboard (after setting up your build environment):

make donutcables/budget96:default

Flashing

Reset Key: Hold down the key located at K00, commonly programmed as left control while plugging in the keyboard.

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"

  2. Install crosspack-avr.

    brew cask install crosspack-avr

  3. Install the following packages:

    brew install python3
pip3 install pyusb
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb

  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.