qmk_firmware/keyboards/winry/winry315/config.h

108 lines
4.1 KiB
C

// Copyright 2022 Sergey Vlasov (@sigprof)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
// Encoder mappings (used for VIA).
#define ENCODERS_CW_KEY { { 22, 0 }, { 18, 0 }, { 20, 0 } }
#define ENCODERS_CCW_KEY { { 23, 0 }, { 19, 0 }, { 21, 0 } }
// clang-format on
// RGB LED parameters.
// This PCB uses a single chain of WS2812-compatible addressable RGB LEDs for
// per-key backlight and underglow.
#define RGBLED_NUM 27
// RGB Lighting configuration. This mode is used by the vendor firmware, and
// can be chosen if the full RGB Matrix support is not desired for some reason.
#ifdef RGBLIGHT_ENABLE
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
# define RGBLIGHT_SLEEP
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
# define RGBLIGHT_EFFECT_SNAKE
# define RGBLIGHT_EFFECT_KNIGHT
# define RGBLIGHT_EFFECT_CHRISTMAS
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
#endif
// RGB Matrix configuration.
#ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_LED_COUNT RGBLED_NUM
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
# define RGB_MATRIX_CENTER \
{ 35, 35 }
# define RGB_DISABLE_WHEN_USB_SUSPENDED
// This option is required for the TYPING_HEATMAP and DIGITAL_RAIN effects,
// both of which are disabled below, so the common support for those effects is
// disabled too.
# undef RGB_MATRIX_FRAMEBUFFER_EFFECTS
// This option is required for reactive effects; disabling this option will
// implicitly disable all of them.
# define RGB_MATRIX_KEYPRESSES
# define ENABLE_RGB_MATRIX_ALPHAS_MODS
# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_BREATHING
# define ENABLE_RGB_MATRIX_BAND_SAT
# define ENABLE_RGB_MATRIX_BAND_VAL
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
# define ENABLE_RGB_MATRIX_CYCLE_ALL
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
# define ENABLE_RGB_MATRIX_DUAL_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_BEACON
# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
# define ENABLE_RGB_MATRIX_RAINDROPS
# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# define ENABLE_RGB_MATRIX_HUE_BREATHING
# define ENABLE_RGB_MATRIX_HUE_PENDULUM
# define ENABLE_RGB_MATRIX_HUE_WAVE
# define ENABLE_RGB_MATRIX_PIXEL_RAIN
// The PIXEL_FRACTAL effect does not work properly when the matrix layout is
// different from the physical layout; it also has problems when underglow
// LEDs are present, or when multiple LEDs are associated with the same key.
# undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL
// Framebuffer effects; can be enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS
// is defined. Both of these effects currently don't work properly when the
// key matrix does not match the physical layout, so they are disabled.
# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP
# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN
// Reactive effects; can be enabled only if at least one of
// RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined.
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define ENABLE_RGB_MATRIX_SPLASH
# define ENABLE_RGB_MATRIX_MULTISPLASH
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#endif