qmk_firmware/keyboards/zen
Danny 2b677ddac9 Fix nyquist (and other splits using D2 in debouncing) (#3067)
* Update default Nyquist revision

* LED slave fix

* Sync changes from lets_split

* Add needed check for debouncing

* Remove line that was setting PD2 pin and interfering with use of that pin

* Add backlight key to keymap
2018-05-28 15:02:41 -07:00
..
keymaps
rev1
config.h
matrix.c
readme.md
rules.mk
serial.c
serial.h
split_rgb.c
split_rgb.h
split_util.c
split_util.h
zen.c
zen.h

readme.md

Zen Keyboard

A split ergo keyboard with a few goals in mind:

  • Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen is only 8.0mm thick.
  • Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholiniear, Atreus62, and Ergodox, this is the best layout for gaming and typing.
  • RGB backlighting. 16 WS2812b LEDs shine through the perimeter switches. The SK6812 variant are cheap and easy to solder.
  • Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume.

A build guide and more info for this keyboard can be found here: Zen Build Guide

Maintained by u/legonut3