qmk_firmware/users/drashna/config.h

153 lines
5.6 KiB
C

/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
// Use custom magic number so that when switching branches, EEPROM always gets reset
#define EECONFIG_MAGIC_NUMBER (uint16_t)0x1339
/* Set Polling rate to 1000Hz */
#define USB_POLLING_INTERVAL_MS 1
#ifdef AUDIO_ENABLE
# define AUDIO_CLICKY
# define STARTUP_SONG SONG(RICK_ROLL)
# define GOODBYE_SONG SONG(SONIC_RING)
# define DEFAULT_LAYER_SONGS \
{ SONG(QWERTY_SOUND), SONG(COLEMAK_SOUND), SONG(DVORAK_SOUND), SONG(OVERWATCH_THEME) }
# define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f
# define UNICODE_SONG_MAC SONG(RICK_ROLL)
# define UNICODE_SONG_LNX SONG(RICK_ROLL)
# define UNICODE_SONG_WIN SONG(RICK_ROLL)
# define UNICODE_SONG_BSD SONG(RICK_ROLL)
# define UNICODE_SONG_WINC SONG(RICK_ROLL)
#endif // !AUDIO_ENABLE
#ifdef RGBLIGHT_ENABLE
# undef RGBLIGHT_ANIMATIONS
# if defined(__AVR__) && !defined(__AVR_AT90USB1286__)
# define RGBLIGHT_SLEEP
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_SNAKE
# define RGBLIGHT_EFFECT_KNIGHT
# else
# define RGBLIGHT_ANIMATIONS
# endif
#endif // RGBLIGHT_ENABLE
#ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
// # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
// # define EECONFIG_RGB_MATRIX (uint32_t *)16
# if defined(__AVR__) && !defined(__AVR_AT90USB1286__) && !defined(KEYBOARD_launchpad)
# define DISABLE_RGB_MATRIX_ALPHAS_MODS
# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
# define DISABLE_RGB_MATRIX_BREATHING
# define DISABLE_RGB_MATRIX_BAND_SAT
# define DISABLE_RGB_MATRIX_BAND_VAL
# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
# define DISABLE_RGB_MATRIX_CYCLE_ALL
# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
# define DISABLE_RGB_MATRIX_DUAL_BEACON
# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
# define DISABLE_RGB_MATRIX_RAINBOW_BEACON
# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
# define DISABLE_RGB_MATRIX_RAINDROPS
# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP
# define DISABLE_RGB_MATRIX_DIGITAL_RAIN
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
# define DISABLE_RGB_MATRIX_SPLASH
# define DISABLE_RGB_MATRIX_MULTISPLASH
# define DISABLE_RGB_MATRIX_SOLID_SPLASH
# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
# endif // AVR
#endif // RGB_MATRIX_ENABLE
#ifndef ONESHOT_TAP_TOGGLE
# define ONESHOT_TAP_TOGGLE 2
#endif // !ONESHOT_TAP_TOGGLE
#ifndef ONESHOT_TIMEOUT
# define ONESHOT_TIMEOUT 3000
#endif // !ONESHOT_TIMEOUT
#ifdef QMK_KEYS_PER_SCAN
# undef QMK_KEYS_PER_SCAN
# define QMK_KEYS_PER_SCAN 2
#endif // !QMK_KEYS_PER_SCAN
// this makes it possible to do rolling combos (zx) with keys that
// convert to other keys on hold (z becomes ctrl when you hold it,
// and when this option isn't enabled, z rapidly followed by x
// actually sends Ctrl-x. That's bad.)
#define IGNORE_MOD_TAP_INTERRUPT
#undef PERMISSIVE_HOLD
//#define TAPPING_FORCE_HOLD
//#define RETRO_TAPPING
#define TAPPING_TERM_PER_KEY
#define FORCE_NKRO
#ifndef TAPPING_TOGGLE
# define TAPPING_TOGGLE 1
#endif
#ifdef TAPPING_TERM
# undef TAPPING_TERM
#endif // TAPPING_TERM
#if defined(KEYBOARD_ergodox_ez)
# define TAPPING_TERM 185
#elif defined(KEYBOARD_crkbd)
# define TAPPING_TERM 200
#else
# define TAPPING_TERM 175
#endif
#define TAP_CODE_DELAY 5
/* Disable unused and unneeded features to reduce on firmware size */
#ifdef LOCKING_SUPPORT_ENABLE
# undef LOCKING_SUPPORT_ENABLE
#endif
#ifdef LOCKING_RESYNC_ENABLE
# undef LOCKING_RESYNC_ENABLE
#endif