qmk_firmware/drivers/awinic/aw20216.c

183 lines
6.1 KiB
C

/* Copyright 2021 Jasper Chan
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "aw20216.h"
#include "spi_master.h"
/* The AW20216 appears to be somewhat similar to the IS31FL743, although quite
* a few things are different, such as the command byte format and page ordering.
* The LED addresses start from 0x00 instead of 0x01.
*/
#define AWINIC_ID 0b1010 << 4
#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers
#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control
#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control
#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice?
#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control?
#define AW_WRITE 0
#define AW_READ 1
#define AW_REG_CONFIGURATION 0x00 // PG0
#define AW_REG_GLOBALCURRENT 0x01 // PG0
// Default value of AW_REG_CONFIGURATION
// D7:D4 = 1011, SWSEL (SW1~SW12 active)
// D3 = 0?, reserved (apparently this should be 1 but it doesn't seem to matter)
// D2:D1 = 00, OSDE (open/short detection enable)
// D0 = 0, CHIPEN (write 1 to enable LEDs when hardware enable pulled high)
#define AW_CONFIG_DEFAULT 0b10110000
#define AW_CHIPEN 1
#define AW_PWM_REGISTER_COUNT 216
#define AW_SPI_START(PIN) spi_start(PIN, false, 0, AW_SPI_DIVISOR)
#ifndef AW_SCALING_MAX
# define AW_SCALING_MAX 150
#endif
#ifndef AW_GLOBAL_CURRENT_MAX
# define AW_GLOBAL_CURRENT_MAX 150
#endif
#ifndef DRIVER_1_CS
# define DRIVER_1_CS B13
#endif
#ifndef DRIVER_1_EN
# define DRIVER_1_EN C13
#endif
#ifndef AW_SPI_DIVISOR
# define AW_SPI_DIVISOR 4
#endif
uint8_t g_spi_transfer_buffer[3] = {0};
uint8_t g_pwm_buffer[DRIVER_COUNT][AW_PWM_REGISTER_COUNT];
bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
bool AW20216_write_register(pin_t slave_pin, uint8_t page, uint8_t reg, uint8_t data) {
// Do we need to call spi_stop() if this fails?
if (!AW_SPI_START(slave_pin)) {
return false;
}
g_spi_transfer_buffer[0] = (AWINIC_ID | page | AW_WRITE);
g_spi_transfer_buffer[1] = reg;
g_spi_transfer_buffer[2] = data;
if (spi_transmit(g_spi_transfer_buffer, 3) != SPI_STATUS_SUCCESS) {
spi_stop();
return false;
}
spi_stop();
return true;
}
bool AW20216_init_scaling(void) {
// Set constant current to the max, control brightness with PWM
aw_led led;
for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
led = g_aw_leds[i];
if (led.driver == 0) {
AW20216_write_register(DRIVER_1_CS, AW_PAGE_SCALING, led.r, AW_SCALING_MAX);
AW20216_write_register(DRIVER_1_CS, AW_PAGE_SCALING, led.g, AW_SCALING_MAX);
AW20216_write_register(DRIVER_1_CS, AW_PAGE_SCALING, led.b, AW_SCALING_MAX);
}
#ifdef DRIVER_2_CS
else if (led.driver == 1) {
AW20216_write_register(DRIVER_2_CS, AW_PAGE_SCALING, led.r, AW_SCALING_MAX);
AW20216_write_register(DRIVER_2_CS, AW_PAGE_SCALING, led.g, AW_SCALING_MAX);
AW20216_write_register(DRIVER_2_CS, AW_PAGE_SCALING, led.b, AW_SCALING_MAX);
}
#endif
}
return true;
}
bool AW20216_soft_enable(void) {
AW20216_write_register(DRIVER_1_CS, AW_PAGE_FUNCTION, AW_REG_CONFIGURATION, AW_CONFIG_DEFAULT | AW_CHIPEN);
#ifdef DRIVER_2_CS
AW20216_write_register(DRIVER_2_CS, AW_PAGE_FUNCTION, AW_REG_CONFIGURATION, AW_CONFIG_DEFAULT | AW_CHIPEN);
#endif
return true;
}
void AW20216_update_pwm(int index, uint8_t red, uint8_t green, uint8_t blue) {
aw_led led = g_aw_leds[index];
if (led.driver == 0) {
AW20216_write_register(DRIVER_1_CS, AW_PAGE_PWM, led.r, red);
AW20216_write_register(DRIVER_1_CS, AW_PAGE_PWM, led.g, green);
AW20216_write_register(DRIVER_1_CS, AW_PAGE_PWM, led.b, blue);
}
#ifdef DRIVER_2_CS
else if (led.driver == 1) {
AW20216_write_register(DRIVER_2_CS, AW_PAGE_PWM, led.r, red);
AW20216_write_register(DRIVER_2_CS, AW_PAGE_PWM, led.g, green);
AW20216_write_register(DRIVER_2_CS, AW_PAGE_PWM, led.b, blue);
}
#endif
return;
}
void AW20216_init(void) {
// All LEDs should start with all scaling and PWM registers as off
setPinOutput(DRIVER_1_EN);
writePinHigh(DRIVER_1_EN);
AW20216_write_register(DRIVER_1_CS, AW_PAGE_FUNCTION, AW_REG_GLOBALCURRENT, AW_GLOBAL_CURRENT_MAX);
#ifdef DRIVER_2_EN
setPinOutput(DRIVER_2_EN);
writePinHigh(DRIVER_2_EN);
AW20216_write_register(DRIVER_2_CS, AW_PAGE_FUNCTION, AW_REG_GLOBALCURRENT, AW_GLOBAL_CURRENT_MAX);
#endif
AW20216_init_scaling();
AW20216_soft_enable();
return;
}
void AW20216_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
aw_led led = g_aw_leds[index];
g_pwm_buffer[led.driver][led.r] = red;
g_pwm_buffer[led.driver][led.g] = green;
g_pwm_buffer[led.driver][led.b] = blue;
g_pwm_buffer_update_required[led.driver] = true;
return;
}
void AW20216_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
AW20216_set_color(i, red, green, blue);
}
return;
}
void AW20216_write_pwm_buffer(pin_t slave_pin, uint8_t buffer_idx) {
AW_SPI_START(slave_pin);
spi_write((AWINIC_ID | AW_PAGE_PWM | AW_WRITE));
spi_write(0);
spi_transmit(g_pwm_buffer[buffer_idx], AW_PWM_REGISTER_COUNT);
spi_stop();
}
void AW20216_update_pwm_buffers(void) {
AW20216_write_pwm_buffer(DRIVER_1_CS, 0);
#ifdef DRIVER_2_CS
AW20216_write_pwm_buffer(DRIVER_2_CS, 1);
#endif
return;
}