qmk_firmware/keyboards/ergodox_ez
Drashna Jaelre 94efa18c28
[Keyboard] Updates to ZSA boards (#6513)
* Update Layer functions to use layer_state_t in ZSA Boards

* Update Music Mask for ZSA boards

Fixes an issue with the board getting stuck on Adjust layer when activating music mode

* Add Support for SMART LED Toggle to Planck EZ

* Add support for SMART LED toggle in Ergodox EZ

* Ifdef swiss cheeze for Oryx Configurator

* Documentation and updates

* Add Oryx Keymap

* Add option to configure the layers for the Layer Indicator

* Update keymap with better examples

* Make sure eeprom is initialized before reading from it

* Force flush of LED matrix when suspending board

This fixes an issue where the LEDs don't fully clear sometimes when the host system goes to sleep

* Enable RGB Sleeping by default

* Add clarification about planck ez led layer config
2019-08-21 17:19:07 -07:00
..
keymaps [Keyboard] Updates to ZSA boards (#6513) 2019-08-21 17:19:07 -07:00
util
190hotfix.sh
config.h [Keyboard] Updates to ZSA boards (#6513) 2019-08-21 17:19:07 -07:00
ergodox_ez.c [Keyboard] Updates to ZSA boards (#6513) 2019-08-21 17:19:07 -07:00
ergodox_ez.h [Keyboard] Updates to ZSA boards (#6513) 2019-08-21 17:19:07 -07:00
info.json
matrix.c
readme.md
rules.mk

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.