qmk_firmware/keyboards/smallkeyboard/config.h

116 lines
4.0 KiB
C

/* Copyright 2021 zhouqiong19840119
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 2
#define MATRIX_COLS 3
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS {C7, C6 }
#define MATRIX_COL_PINS {F7, F6, F5}
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 3
#ifdef RGB_MATRIX_ENABLE
# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
# define RGB_MATRIX_KEYPRESSES
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define ENABLE_RGB_MATRIX_ALPHAS_MODS
// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_BREATHING
// #define ENABLE_RGB_MATRIX_BAND_SAT
#define ENABLE_RGB_MATRIX_BAND_VAL
// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
#define ENABLE_RGB_MATRIX_CYCLE_ALL
#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
#define ENABLE_RGB_MATRIX_DUAL_BEACON
#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
#define ENABLE_RGB_MATRIX_RAINDROPS
#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
#define ENABLE_RGB_MATRIX_HUE_BREATHING
#define ENABLE_RGB_MATRIX_HUE_PENDULUM
#define ENABLE_RGB_MATRIX_HUE_WAVE
// #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
#define ENABLE_RGB_MATRIX_PIXEL_RAIN
#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
// #define ENABLE_RGB_MATRIX_DIGITAL_RAIN
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
// #define ENABLE_RGB_MATRIX_SPLASH
// #define ENABLE_RGB_MATRIX_MULTISPLASH
// #define ENABLE_RGB_MATRIX_SOLID_SPLASH
// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 0b1110100 AD <-> GND
// 0b1110111 AD <-> VCC
// 0b1110101 AD <-> SCL
// 0b1110110 AD <-> SDA
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_COUNT 1
#define DRIVER_LED_TOTAL 6
#endif
//#define RGB_DI_PIN B7
//#ifdef RGB_DI_PIN
//#define RGBLIGHT_ANIMATIONS
//#define RGBLED_NUM 8
//#define RGBLIGHT_HUE_STEP 5
//#define RGBLIGHT_SAT_STEP 5
//#define RGBLIGHT_VAL_STEP 5
//#define RGBLIGHT_SLEEP
//#endif