qmk_firmware/keyboards/winry/winry315/winry315.c

209 lines
6.2 KiB
C

// Copyright 2022 Sergey Vlasov (@sigprof)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "winry315.h"
#include "via.h"
#if !defined(WINRY315_DEFAULT_ORIENTATION)
# define WINRY315_DEFAULT_ORIENTATION WINRY315_ORIENTATION_TOP
#endif
#if !defined(VIA_ENABLE) && defined(ENCODER_ENABLE)
# ifndef MEDIA_KEY_DELAY
# define MEDIA_KEY_DELAY 10
# endif
bool encoder_update_kb(uint8_t index, bool clockwise) {
if (!encoder_update_user(index, clockwise)) {
return false;
}
if (index == 0) {
// Left encoder (assuming the default "top" orientation)
if (clockwise) {
tap_code(KC_PGDN);
} else {
tap_code(KC_PGUP);
}
} else if (index == 1) {
// Center encoder
if (clockwise) {
tap_code_delay(KC_VOLU, MEDIA_KEY_DELAY);
} else {
tap_code_delay(KC_VOLD, MEDIA_KEY_DELAY);
}
} else if (index == 2) {
// Right encoder
if (clockwise) {
tap_code_delay(KC_MNXT, MEDIA_KEY_DELAY);
} else {
tap_code_delay(KC_MPRV, MEDIA_KEY_DELAY);
}
}
return true;
}
#endif // !defined(VIA_ENABLE) && defined(ENCODER_ENABLE)
#if defined(RGB_MATRIX_ENABLE)
// LED mapping (assuming the default "top" orientation):
// 0 - right encoder, top right
// 1 - right encoder, top left
// 2 - center encoder, top right
// 3 - center encoder, top left
// 4 - left encoder, top right
// 5 - left encoder, top left
// 6 - row 0, column 0
// 7 - row 1, column 0
// 8 - row 2, column 0
// 9 - row 2, column 1
// 10 - row 1, column 1
// 11 - row 0, column 1
// 12 - row 0, column 2
// 13 - row 1, column 2
// 14 - row 2, column 2
// 15 - row 2, column 3
// 16 - row 1, column 3
// 17 - row 0, column 3
// 18 - row 0, column 4
// 19 - row 1, column 4
// 20 - row 2, column 4
// 21 - underglow, right bottom
// 22 - underglow, left bottom
// 23 - underglow, left middle
// 24 - underglow, left top
// 25 - underglow, right top
// 26 - underglow, right middle
# define X_MM_MIN (-42)
# define X_MM_MAX 42
# define Y_MM_MIN (-40) // actually -35, but adjusted to get height = width
# define Y_MM_MAX 44 // actually 40, but adjusted to get height = width
# define WIDTH_MM (X_MM_MAX - X_MM_MIN)
# define HEIGHT_MM (Y_MM_MAX - Y_MM_MIN)
# define WIDTH_UNITS (35 * 2) // needs to match RGB_MATRIX_CENTER
# define HEIGHT_UNITS (35 * 2) // needs to match RGB_MATRIX_CENTER
// Convert the LED physical coordinates from millimeters with the origin at the
// PCB center to the form expected by the RGB Matrix code.
# define LED(x_mm, y_mm) \
{ ((x_mm - X_MM_MIN) * WIDTH_UNITS + WIDTH_MM / 2) / WIDTH_MM, ((Y_MM_MAX - y_mm) * HEIGHT_UNITS + HEIGHT_MM / 2) / HEIGHT_MM }
// clang-format off
static const led_config_t PROGMEM initial_led_config = {
{
{ 6, 11, 12, 17, 18, 7, 10, 13, 16, 19, 8, 9, 14, 15, 20, 2, 0, 4, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }
},
{
LED( 35, 36),
LED( 21, 36),
LED( 8, 34),
LED(-8, 34),
LED(-21, 36),
LED(-35, 36),
LED(-38, 5),
LED(-38, -14),
LED(-38, -33),
LED(-19, -33),
LED(-19, -14),
LED(-19, 5),
LED( 0, 5),
LED( 0, -14),
LED( 0, -33),
LED( 19, -33),
LED( 19, -14),
LED( 19, 5),
LED( 38, 5),
LED( 38, -14),
LED( 38, -33),
LED( 28, -35),
LED(-28, -35),
LED(-37, -9),
LED(-42, 40),
LED( 42, 40),
LED( 37, -9)
},
{
1, 1, 1, 1, 1, 1, // encoders (colored as modifiers)
4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, // regular keys
2, 2, 2, 2, 2, 2 // underglow
}
};
// clang-format on
led_config_t g_led_config;
void keyboard_pre_init_kb(void) {
// To be safe against any possible changes to rgb_matrix_init(),
// g_led_config should be initialized before rgb_matrix_init() is called;
// matrix_init_kb() would be too late, so keyboard_pre_init_kb() is used.
memcpy_P(&g_led_config, &initial_led_config, sizeof(g_led_config));
winry315_set_orientation(WINRY315_DEFAULT_ORIENTATION);
keyboard_pre_init_user();
}
// Encoders have two associated LEDs on this board; supporting more than one
// LED per key requires defining rgb_matrix_map_row_column_to_led_kb() to
// report any extra LEDs.
uint8_t rgb_matrix_map_row_column_to_led_kb(uint8_t row, uint8_t column, uint8_t *led_i) {
if (row == 0) {
switch (column) {
case 15: // center encoder
led_i[0] = 3;
return 1;
case 16: // right encoder
led_i[0] = 1;
return 1;
case 17: // left encoder
led_i[0] = 5;
return 1;
}
}
return 0;
}
#endif // defined(RGB_MATRIX_ENABLE)
void winry315_set_orientation(uint8_t orientation) {
(void)orientation;
#if defined(RGB_MATRIX_ENABLE)
for (uint8_t i = 0; i < RGB_MATRIX_LED_COUNT; ++i) {
led_point_t * dst_point = &g_led_config.point[i];
const led_point_t *src_point = &initial_led_config.point[i];
uint8_t x = pgm_read_byte(&src_point->x);
uint8_t y = pgm_read_byte(&src_point->y);
switch (orientation) {
case WINRY315_ORIENTATION_TOP:
default:
dst_point->x = x;
dst_point->y = y;
break;
case WINRY315_ORIENTATION_LEFT:
dst_point->x = y;
dst_point->y = WIDTH_UNITS - x;
break;
case WINRY315_ORIENTATION_RIGHT:
dst_point->x = HEIGHT_UNITS - y;
dst_point->y = x;
break;
case WINRY315_ORIENTATION_BOTTOM:
dst_point->x = WIDTH_UNITS - x;
dst_point->y = HEIGHT_UNITS - y;
break;
}
}
#endif // defined(RGB_MATRIX_ENABLE)
}
#if defined(VIA_ENABLE)
void via_set_layout_options_kb(uint32_t value) {
winry315_set_orientation(value & 0x03);
}
#endif // defined(VIA_ENABLE)