qmk_firmware/keyboards/hub20
Ryan 9dcd03b6ca
Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps
chconf.h
config.h
halconf.h
hub20.c
hub20.h
info.json
mcuconf.h
readme.md
rules.mk Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

readme.md

Hub20

Hub20 is a 20 key macro pad with an inbuilt USB 2.0 hub and dual rotary encoders. It can be configured to be a left / right hand numberpad, along with a 4x5 1u layout.

For more information regarding the keyboard, please visit the Hub20 Website or GitHub Repo.

Make example for this keyboard (after setting up your build environment):

make hub20:default

Flashing example for this keyboard:

make hub20:default:flash

To reset the board into bootloader mode, do one of the following:

  • Press the reset switch between the center two USB-C ports while the board is plugged in
  • Hold the top left key while connecting the USB cable (also erases persistent settings)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.