* Remap layout to match the actual keys sent from board. Fixes #3480 * Remap layer 1 |
||
---|---|---|
.. | ||
keymaps | ||
config.h | ||
info.json | ||
readme.md | ||
rules.mk | ||
tada68.c | ||
tada68.h |
readme.md
TADA68
A compact 65% keyboard.
Keyboard Maintainer: QMK Community
Hardware Supported: TADA68 PCB
Hardware Availability: kbdfans, kbdist
Make example for this keyboard (after setting up your build environment):
make tada68:default:bin
See build environment setup then the make instructions for more information.
Flashing Instructions (Win)
Read all the instructions, there are a few warnings of things to avoid doing to avoid bricking your Tada68. It is much too easy to do!
- from the
qmk_firmware\
directory run:
$ make tada68:default:flashbin
-
Connect your keyboard to Windows computer, hit the reset button on the TADA, the lights will start flashing.
-
You'll see a new drive on your computer called TADA68. Backup the original factory
FLASH.BIN
file thats inside it. -
Delete
FLASH.BIN
from the TADA drive and copytada68_default.bin
that was generated at the root of the qmk directory into the TADA drive. -
Do not eject the USB device. Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
Flashing Instructions (Mac)
When flashing the keyboard from a Mac, you must delete some files that are automatically created by the operating system in order to prevent bricking your keyboard. Original information from /u/pawlwall from https://www.reddit.com/r/MechanicalKeyboards/comments/520cov/using_an_originative_tada86_on_a_mac/
- from the
qmk_firmware\
directory run:
$ make tada68:default:flashbin
-
Connect your keyboard to your Mac, hit the reset button on the bottom of the TADA, the lights will start flashing.
-
You'll see a new drive on your computer called TADA68. Backup the original factory
FLASH.BIN
file that's inside it. -
Open the terminal and cd to the folder where the keyboard has been mounted
cd /Volumes/TADA68\ /
- Copy over your new firmware to the keyboard
cp -r <path to your qmk_firmware folder>/FLASH.bin .
- Remove files that MacOS automatically created which interfere with the keyboard
rm -fr .Trashes/ .fseventsd/ ._.Trashes ._FLASH.bin
- Eject the USB device or hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
Flashing Instructions (Linux)
Use these instructions at your own risk. Mount settings originally found at https://www.reddit.com/r/MechanicalKeyboards/comments/8e2nnp/help_problems_flashing_firmware_on_tada68_from/
- from the
qmk_firmware\
directory run:
$ make tada68:default:flashbin
-
Connect your keyboard to Windows computer, hit the reset button on the TADA, the lights will start flashing.
-
A new entry should appear at
/dev/sd*
. Mount the board using this command:
mount -t vfat -o rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2 <path to device> /mnt/tada68
- Back up the original firmware
mv /mnt/tada68/FLASH.BIN ~
- Copy over your new firmware to the keybaord
cp <path to your qmk_firmware folder>/FLASH.bin /mnt/tada68
- Do not eject the USB device. Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!