qmk_firmware/keyboards/singa
fauxpark efa28d0f5c Convert some PS2AVRGB boards to I2C WS2812 driver (#7241)
* Convert some PS2AVRGB boards to I2C WS2812 driver

* Fix Travis failure for bface
2019-11-04 16:05:03 -08:00
..
keymaps
config.h
info.json
readme.md
rules.mk
singa.c
singa.h
usbconfig.h

readme.md

Singa

Singa

75% Custom Keyboard.

Keyboard Maintainer: amnesia0287
Hardware Supported: TGR-Elaine v1.0 PCB
Hardware Availability: http://singakbd.com/

Make example for this keyboard (after setting up your build environment):

make singa:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K00, commonly programmed as Esc while plugging in the keyboard.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python3
    pip3 install pyusb
    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.