qmk_firmware/keyboards/eternal_keypad
Ryan ccb6c908dd
Remove `SOFT_SERIAL_PIN` for non-split boards (#19774)
* Remove `SOFT_SERIAL_PIN` for non-split boards

* Delete more empty config.h
2023-02-08 23:57:42 +00:00
..
keymaps
config.h Remove `SOFT_SERIAL_PIN` for non-split boards (#19774) 2023-02-08 23:57:42 +00:00
eternal_keypad.c
eternal_keypad.h
info.json Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

eternal_keypad

eternal_keypad

A 36 key gaming keypad that can be assembled and configured for both left and right handed mouse users.

  • Keyboard Maintainer: duckyb
  • Hardware Supported: ETERNAL Keypad
  • Hardware Availability: Open Source, files available on gitHub

Make example for this keyboard (after setting up your build environment):

make eternal_keypad:default

Flashing example for this keyboard:

make eternal_keypad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,1) in the matrix (the top left key or Escape) and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available (activated by holding the lower right key and tapping the lower left key)
  • Physical reset button: Briefly sort the pads labeled "RST" and "GND" on the micro-controller