qmk_firmware/keyboards/kc60se
Ryan f9aeea64c1
Migrate `MCU` and `BOOTLOADER` to data-driven (#19529)
2023-02-08 18:41:46 +11:00
..
keymaps
config.h Remove unused `GRAVE_ESC_CTRL_OVERRIDE` from config.h (#19752) 2023-02-06 02:40:23 +00:00
info.json Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00
kc60se.c
kc60se.h
readme.md
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

kc60se

  • Keyboard Maintainer: Blake C. Lewis, MechMerlin
  • Hardware Supported: KC60SE
  • Hardware Availability: PCB is no longer available

Description:

  • 60% keyboard PCB;
  • supports ANSI, ISO, and HHKB layouts.

Enter the Bootloader

  • New firmware, with Bootmagic Lite:
    • holding down Esc while plugging in USB.
  • As delivered, with Full Bootmagic (deprecated):
    • unplug keyboard;
    • while holding down 'Space' 'B', plug in USB cable and continue to hold for 8 seconds;
    • 'lsusb' should report 'Atmel Corp. atmega32u4 DFU bootloader' instead of 'feed 6060';
    • in bootloader LEDs are off & keyboard does not work.
  • Hardware way:
    • momentary jump pads 5 & 6 to enter bootloader;

Compile the default keymap:

make kc60se:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

NKRO

  • N or 6 Key Rollover NKRO/6KRO
  • navigating bios of computer may require 6KRO
  • default keymap has fn(T) mapped to toggle NKRO/6KRO
  • test: press 8 keys at same time, if 6, then 6KRO, if 8, then NKRO

DIP switches enable/disable GUI keys, the second keys from the ends on the bottom row:

  • K41/K4C are WIN/GUI and will disrupt games;
  • Add keycodes GUI_ON and GUI_OFF to your function layer to switch on/off GUI keys. It is eaier than flipping the dip switches;
 dip      keys
#1  #2  K41 K4C
 1   1   1   1    both keys enabled
 1   0   0   1
 0   1   1   0
 0   0   0   0    both keys disabled

ISP header next to the ATmega32U4:

  • if you can't get into bootloader, while keyboard is on, momentary jump pad 5 to pad 6
2 4 6
: : :
1 3 5
1 - B3      MISO, column 13, square pad
2 - VCC
3 - B1      SCLK, column 7
4 - B2      MOSI, caplock led
5 - Reset   | momentary jump 5 and 6
6 - Ground  | to enter Bootloader