History

Danny 32bab55def Add Keebio lighting defaults (#8884 ) * Set Iris LED/RGB defaults * Add lighting defaults for more boards		2020-04-25 14:26:26 -07:00
..
keymaps	Remove filesize changes from default-ish rules.mk files, sans handwired (#8040 )	2020-01-30 13:47:48 -05:00
rev1	Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards (#7915 )	2020-01-19 14:11:57 +11:00
rev2	Add Keebio lighting defaults (#8884 )	2020-04-25 14:26:26 -07:00
rev3	Add Keebio lighting defaults (#8884 )	2020-04-25 14:26:26 -07:00
config.h	…
info.json	…
levinson.c	…
levinson.h	…
readme.md	…
rules.mk	Remove filesize changes from default-ish rules.mk files, sans handwired (#8040 )	2020-01-30 13:47:48 -05:00

readme.md

Levinson

A split 40% split 4x12 ortholinear keyboard made and sold by Keebio. It's essentially a Let's Split with LED backlight support and 2u thumb key support. More info at Keebio.

Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, Elite-C
Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make keebio/levinson/rev3:default

Example of flashing this keyboard with Pro micro:

make keebio/levinson/rev3:default:avrdude

Example of flashing this keyboard with Elite-C:

You'll need to add BOOTLOADER = atmel-dfu to your rules.mk to ensure that resetting the board works properly.

Hold the reset button on the Elite-C board, or the reset button on the keyboard if already assembled, then release the button and run:

make keebio/levinson/rev3:default:dfu

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for this keyboard can be found here: Levinson Build Guide