masq
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/dztech/dz65rgb
History
Ryan ccb6c908dd
Remove `SOFT_SERIAL_PIN` for non-split boards (#19774) 
* Remove `SOFT_SERIAL_PIN` for non-split boards

* Delete more empty config.h
 		2023-02-08 23:57:42 +00:00
..
keymaps Remove `IS_HOST_LED_ON` and migrate usages (#19753) 2023-02-06 02:36:09 +00:00
v1 Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00
v2 Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00
v3 Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00
dz65rgb.c
…
dz65rgb.h
…
info.json Migrate `LAYOUTS` to data driven (#19541) 2023-01-10 02:48:20 +00:00
readme.md
…

readme.md

DZ65RGB

A customizable 65% RGB keyboard.

  • Keyboard Maintainer: moyi4681
  • Hardware Supported: DZ65RGB V1,V2 and V3
  • Hardware Availability: KBDfans

There are three versions of the DZ65RGB. Please use the appropriate firmware for your board.

  • V1: STM32F303 (Arm), takes .bin files
  • V2: ATmega32U4 (AVR), takes .hex files, is31fl3731 rgbmatrix driver
  • V3: ATmega32U4 (AVR), takes .bin files, is31fl3741 rgbmatrix driver

Bootloader mode

To put in bootloader mode, hold the Esc key while plugging in the USB cable. or use reset key behind the pcb.

Making firmware

Make example for this keyboard (after setting up your build environment):

make dztech/dz65rgb/v1:default # Arm (STM32F303)
make dztech/dz65rgb/v2:default # AVR (ATmega32U4)
make dztech/dz65rgb/v3:default # AVR (ATmega32U4)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.