qmk_firmware/keyboards/sawnsprojects/amber80/readme.md

25 lines
1.3 KiB
Markdown

# Amber80 solder
A TKL keyboard sold in several variants.
1. [Solder](solder/): 1/2022. Atmega32u4 soldered keyboard. Sold under the name "Amber80" with Amber80 keyboard case. Compatible with Amber80 keyboard case.
**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
* Hardware Supported: Amber80
* Hardware Availability: Comming Soon
Make examples for this keyboard (after setting up your build environment):
make sawnsprojects/amber80/solder:default
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).