qmk_firmware/keyboards/yushakobo/navpad/10_helix_r/readme.md

navpad 1.0 with Helix (Right hand side)

Navpad connected with helix keyboard (Right Side)

• Keyboard Maintainer: yushakobo
• Hardware Supported: Navpad 1.0 PCB and Helix PCB, Pro Micro
• Hardware Availability: https://shop.yushakobo.jp/products/navpad-10

Make example for this keyboard (after setting up your build environment):

make yushakobo/navpad/10_helix_r:default

Flashing examples for this keyboard...

Helix side:

make yushakobo/navpad/10_helix_r:default:avrdude-split-right

Navpad side:

make yushakobo/navpad/10_helix_r:default:avrdude-split-left

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
• Keycode in layout: Press the key mapped to RESET if it is available