masq
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/ms_sculpt/readme.md

1.2 KiB
Raw Blame History

ms_sculpt

ms_sculpt_with_cold_dry_joints

MS Sculpt Keyboard ISO-layout wired to STM32F401 / blackpill

  • Keyboard Maintainer: Jean Bernard
  • Hardware Supported: MS Sculpt Keyboard ISO-layout, STM32F401
  • Hardware Availability: Ebay

Make example for this keyboard (after setting up your build environment):

make ms_sculpt:default

Flashing example for this keyboard:

make ms_sculpt:default:flash

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.